dicio 928 Inline Wire Connectors Nuts User Guide
- June 17, 2024
- Dicio
Table of Contents
dicio 928 Inline Wire Connectors Nuts
USER GUIDE
LEVER WIRE CONNECTORS
MODEL 928
Instructions:
1. Turn off the power before installing or removing connectors.
2. You may use solid and/or stranded copper conductors.
3. Strip the wires to approx.lo mm/ 0.39 inches.
4. Lift the lever to 90°and insert stripped conductor fully. Only one wire
can be used in each hole.
5. Put another stripped wire into the opposite side of the wire entry hole.
6. Lower the lever to close the clamp and complete your connection.
7. Test through the test slot beneath the housing with a voltage tester.
8. To remove, lift the lever and pull out the wire.
Materiati Data| PC 94V-2 Grade (Housing)
PA66 94V-0 Grade (Lever)
---|---
Insert| Brass/ Tin-Plated Stainless Steel
Voltage/ Ampere| 450V / 32A(IEC},600V(UL)
Working Temperature| -40°C to 90°C
Cross Section| 0.20 -4mm2 , AWG 24-12
928-2 & 928-3 have received both UL and ENEC while 928-1 has received ENEC and is applying for UL approvals
lnline Wire Connector System
Documents / Resources
|
dicio 928 Inline Wire Connectors
Nuts
[pdf] User Guide
928 Inline Wire Connectors Nuts, 928, Inline Wire Connectors Nuts, Wire
Connectors Nuts, Connectors Nuts, Nuts
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>