GAGGENAU DF211701 200 Series 24 White Top Control Built In Dishwasher User Manual

June 17, 2024
Gaggenau

GAGGENAU-logo

GAGGENAU DF211701 200 Series 24 White Top Control Built In Dishwasher

GAGGENAU-DF211701-200-Series-24-White-Top-Control-Built-In-Dishwasher-
image

Specifications

  • Model: DF211701
  • Product: Dishwasher
  • Language: English (en-us)

Product Information

The Gaggenau Dishwasher (Model: DF211701) is a high-quality appliance designed to provide efficient and effective cleaning for your dishes. It comes with various features such as AquaSensor, multiple sensors, energy-saving options, and personalized functions to suit your needs.

Product Usage Instructions

1. Familiarizing Yourself with Your Appliance:

Before using the dishwasher, familiarize yourself with the appliance and its controls. Ensure you understand how to operate the dishwasher effectively.

2. Water Softening System:

Set the water softening system according to your water hardness settings. Use special dishwasher salt if needed and follow the instructions to switch off the water softening system if required.

3. Rinse Aid System:

Fill the rinse aid compartment with rinse aid and adjust the amount as needed. You can also switch off the rinse aid system if desired.

4. Detergent:

Use only recommended detergents in the correct amount. Avoid incompatible detergents and refer to the detergent table for guidance. Add detergent to the appropriate compartment before starting a cycle.

5. Dishware:

Prevent damage to glass and dishware by loading them correctly. Follow loading patterns for optimal cleaning results and ensure proper care when removing dishware after a cycle.

6. Cleaning and Maintenance:

Regularly clean the tub, spray arms, and filter system of the dishwasher using appropriate cleaning agents. Follow the tips provided for appliance care to maintain its performance.

FAQs

  • Q: How do I change the basic settings of the dishwasher?
    • A: To change the basic settings, refer to section 14 of the user manual which provides an overview of the settings and instructions on how to adjust them according to your preferences.
  • Q: Can I use any type of detergent in the dishwasher?
    • A: No, it is recommended to use only detergents that are suitable for dishwashers and avoid incompatible detergents that may cause damage or affect cleaning performance.

Gaggenau en-us Use and Care Manual
DF211701
Dishwasher

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

Read all instructions carefully before use. These precautions will reduce the risk of electrical shock, fire and injury to persons. When using kitchen appliances, basic safety precautions must be followed including those in the following pages.
1.1Safety definitions
Here you can find explanations of the safety signal words used in this manual.
WARNING This indicates that death or serious injuries may occur as a result of non-observance of this warning.
CAUTION This indicates that minor or moderate injuries may occur as a result of non-observance of this warning.
NOTICE: This indicates that damage to the appliance or property may occur as a result of non-compliance with this advisory.
Note: This alerts you to important information and/or tips.
1.2General information
To reduce the risk of fire, electrical shock, or serious injury, observe the following. ¡ This appliance is provided with installation instructions
and this use and care manual. Read and understand all instructions before using the appliance. ¡ Keep the manual and the product information in a safe place for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. ¡ Severe product damage and/or injury could result from the use of unqualified service technicians or nonoriginal parts. All repairs must be performed by an authorized service provider using only original equipment factory replacement parts. ¡ NSF/ANSI 184 Certified residential dishwashers are not intended for licensed food establishments.
1.3Intended use
Only use this appliance: ¡ for cleaning household dishware. ¡ For normal household use and in enclosed spaces in a
residential environment.
4

¡ Up to an altitude of 13,100 ft (4000 m) above sea level.
1.4Restrictive Use
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
1.5Grounding instructions
This appliance must be grounded to a metal, permanent wiring system or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the dishwasher. See the Installation Instructions included with this dishwasher for more information on electrical requirements.
WARNING Improper connection of the equipment grounding conductor can result in risk of electric shock.
This appliance must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor. Check with a qualified electrician or authorized service representative if you are in doubt whether the appliance is properly grounded.
1.6Safe use
Follow these safety instructions when using the appliance.
WARNING To reduce the risk of serious injury, observe the following.
Read all instructions before using this dishwasher. Use this dishwasher only for its intended function,
which is the washing of household dishware and kitchenware rated as dishwasher safe.
Only use detergents or rinsing agents recommended
for use in a dishwasher, and keep them out of the reach of children.
Do not abuse, sit or stand on the door or dish racks of
the dishwasher.

en-us
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS

WARNING Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. Hydrogen gas is explosive.
Before using a dishwasher that is connected to a hot
water system that has been unused for two weeks or longer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is explosive, do not smoke or use an open flame during this time.
WARNING To avoid risk of electric shock, observe the following.
Only use the appliance in enclosed residential space
according to the installation manual.
Never expose the appliance to intense heat or humidity. Do not use any steam cleaners or high-pressure
cleaners to clean this appliance. If not followed, excess moisture can accumulate.
WARNING To avoid risk of injury, when loading items to be washed, observe the following.
Locate sharp items so they are not likely to damage the
door seal.
Load knives and other sharp utensils with their handles
up to reduce the risk of cut-type injuries.
Do not wash plastic items unless they are marked
“dishwasher safe” or the equivalent. For plastic items not so marked, check the manufacturer’s recommendations.
Do not operate your dishwasher unless all enclosure
panels are in place.
Do not tamper with or override controls and interlocks.
WARNING For safe care and operation of your appliance, observe the following.
Follow the safety instructions and directions for use on
the detergent and rinse aid product labels.
Do not use harsh chemicals such as bleach-based
products to clean your dishwasher. Some bleach-based products can damage your dishwasher and may present health hazards!

Always use caution when opening the door during or
following a wash cycle as hot water or steam may escape. Do not fully open the door until water noises have stopped and steam has subsided.
To avoid floor damage and possible mold growth, do
not allow wet areas to remain around or under the dishwasher.
NOTICE: Water and power shut off
It is highly recommended for the end user to become
familiar with the procedure to shut off the incoming water supply and the procedure to shut off the incoming power supply. See the installation instructions or contact your installer for more information.
1.7Risk to children
Follow these safety instructions if there are children in your home.
WARNING To reduce risk of injury to children, observe the following.
Do not allow children to play in or on the dishwasher. When children become old enough to operate the
appliance, it is the responsibility of the parents/legal guardians to ensure the children are instructed in safe practices by qualified persons.
Remove the dishwasher door to the washing
compartment when removing an old dishwasher for service or discarding.
1.8State of California Proposition 65 Warnings
This product may contain a chemical known to the State of California, which can cause cancer or reproductive harm. Therefore, the packaging of your product may bear the following label as required by California:

5

en-usPreventing material damage

Preventing material damage

2Preventing material damage
Preventing material damage
NOTICE: Harsh chemicals such as bleach-based products can damage your dishwasher. Do not use harsh chemicals such as bleach-based
products to clean your dishwasher. Certain cleaning products may damage the appliance. Do not use a steam cleaner. So as not to scratch the finish on the appliance, do not
use sponges with a rough surface or abrasive cleaning agents. Avoid stainless steel polish Do not use stainless steel polish on an anti-fingerprint finish or a black stainless finish. Escaping water vapor can damage cabinetry. When the program ends, let the appliance cool down a bit before opening the door. Protect your appliance from the elements. Protect against freezing to avoid possible damage to the fill valve. Damage caused by freezing is not covered by the warranty. Special salt for dishwashers can damage the tub due to corrosion. To make sure that any special salt that escapes is washed out of the tub, add the special salt to the dispenser for special salt immediately before the program starts. Detergent may damage the water softening system. Only fill the dispenser of the water softening system with special dishwasher salt.

Environmental protection and energy-saving

3Environmental protection and energy-saving
Environmental protection and energy-saving
3.1Saving energy
If you follow these instructions, your appliance will use less power and water.
Use the Eco program. a The Eco program is energy-efficient and
environmentally friendly. “Dishwasher Cycles”, Page 10
Change the sensor setting to the default. a Consumption is reduced.
“Sensors”, Page 6

level is lower, the washing water is used in the next rinse, so reducing water consumption by 3-6 liters. In the Auto cycles the temperature and run time are additionally adjusted to the level of soiling.

3.3Sensors

The sensors adjust the cycle sequence and strength in the Auto cycles depending on the level and type of soiling. The sensor has different sensitivity levels that can be changed in the basic settings. “Changing the basic settings”, Page 25

Sensor setting Standard Sensitive
Very sensitive

Description
Optimal setting for mixed loads and heavily soiled dishware. Saves both energy and water.
Adjusts the cycle strength for effective removal of food remnants even with low soiling levels. Energy and water consumption are adjusted accordingly.
Adjusts the cycle strength for difficult conditions of use, e.g. stubborn dried-on food remnants. Recommended setting when using organic or ecological detergents containing low levels of active agents. Energy and water consumption are adjusted accordingly.

3.2AquaSensor
The AquaSensor is an optical measuring device (light barrier) which measures the turbidity of the washing water. You can save water with the AquaSensor. The operation of the AquaSensor depends on the selected cycle. If the soiling level is high, the washing water is drained off and replaced with fresh water. If the soiling
6

Familiarizing yourself with your appliance

4Familiarizing yourself with your appliance
Familiarizing yourself with your appliance
4.1Appliance

Familiarizing yourself with your applianceen-us

1

Rating plate

2

Detergent dispenser

3

Lower rack

4

Dispenser for special salt

1 Depending on the appliance specifications

Rating plate with E number and FD number Page 39. You will need this data to contact Customer service Page 38. Add detergent to the detergent dispenser. Lower rack Page 13 Add special salt to the dispenser for special salt. “Water softening system”, Page 16
7

en-us

Familiarizing yourself with your appliance

5

Lower spray arm

6

Detergent tab collecting tray

7

Upper rack

8

Silverware drawer

9

EmotionLight

10

Cup shelf1

11

Upper spray arm

12

Filter system

13

Silverware basket

14

Dispenser for rinse aid

1 Depending on the appliance specifications

The lower spray arm washes the dishware in the lower rack. If the dishware has not been washed properly, clean the spray arms. “Cleaning the spray arms”, Page 28
During the wash cycle, detergent tabs automatically drop out of the detergent dispenser into the tab collecting tray, where they can dissolve fully. Upper rack Page 12
Silverware drawer Page 13
Interior lighting of the appliance. “Overview of the basic settings”, Page 24 Cup shelf Page 14
The upper spray arm washes the dishware in the upper rack. If the dishware has not been washed properly, clean the spray arms. “Cleaning the spray arms”, Page 28 Filter system Page 27
Silverware basket
Rinse aid is added to the dispenser for rinse aid. “Rinse aid system”, Page 17

4.2Controls

You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.

1

2

3 4 5 6 7 8 9 10

16

1

ON/OFF button and reset button

1 Depending on the appliance specifications

15 14 13 12
Switching on the appliance Switching off the appliance Terminating the wash cycle Page 22

11

8

2

Cycle buttons

3

Info button

4

Rinse aid refill indicator

5

Special salt refill indicator

6

Display Remote Start 1

7

WLAN display

8

Electronic delay time

9

Remote Start

10

Cycle buttons and options

11

Start button

12

buttons

13

Setting buttons

14

Door handle1

15

Display1

16

Display

1 Depending on the appliance specifications

Familiarizing yourself with your applianceen-us
Cycles Page 10
If you press , the display shows information about selected cycles, basic settings and additional functions. If you press for approx. 3 seconds, you can open the menu. “Changing the basic settings”, Page 25
Rinse aid system “Adding rinse aid”, Page 17
Water softening system
If you have activated the function and are controlling the appliance via the Home Connect® app, the display lights up on the appliance. Home Connect Page 25
Setting the electronic delay time Page 22
“Remote Start “, Page 26
Cycles Page 10 Options Page 11 Starting the wash cycle Page 22
You can use these buttons to scroll between the basic settings. “Changing the basic settings”, Page 25 Changing the basic settings Page 25
Open the appliance door.
The display shows information about cycles, basic settings or additional options. You can change the basic settings via the display and the setting buttons. “Changing the basic settings”, Page 25
The display shows information about cycles, basic settings or additional options. You can change the basic settings via the display and the setting buttons. “Changing the basic settings”, Page 25

9

en-usDishwasher Cycles

Dishwasher Cycles

5Dishwasher Cycles
Dishwasher Cycles
Below is an overview of the different cycles available on your dishwasher. The running time may vary depending on the cycle selected. The running time depends on the water temperature, the quantity of dishware, the level of dirt and the option selected. The running time will change if the rinse aid system is switched off or rinse aid needs to be added. The consumption values relate to normal conditions and a water hardness of 16 – 20 °E. Different influencing factors such as water temperature or pipe pressure may result in deviations.

Cycle

Purpose

Cycle sequence

Auto 150-160°F Dishware: ¡ Washing pots and pans, non-fragile dishware and silverware Level of soiling: ¡ Removing stubborn burned or dried on food remnants containing starch and protein.

Auto 130-150°F Dishware: ¡ Cleaning mixed dishware and silverware. Level of soiling: ¡ Removing common household food remnants lightly dried-on.

Dishware:

Eco

¡ Cleaning mixed dishware

and silverware.

Level of soiling:

¡ Removing common

household food remnants

lightly dried-on.

Glass Care

Dishware: ¡ Cleaning temperature
sensitive dishes, silverware, and glasses. Level of soiling: ¡ Removing lightly adhered fresh food remnants.

Quick Wash

Dishware: ¡ Cleaning delicate dishware,
silverware, temperaturesensitive plastics and glasses. Level of soiling: ¡ Removing lightly adhering fresh food remnants.

Personalization function

Intensive ¡ Pre-Rinse ¡ Cleaning 151 °F ­ 160 °F ¡ Intermediate rinse ¡ Final rinse 162 °F ¡ Drying
Sensor controlled: ¡ Optimized by sensors depending on
the soiling of the rinse water.
Most economical cycle: ¡ Pre-Rinse ¡ Cleaning 113 °F ­ 131 °F ¡ Intermediate rinse ¡ Final rinse 154 °F ¡ Drying
Particularly gentle and improved drying: ¡ Pre-rinse ¡ Cleaning 122 °F ¡ Intermediate rinse ¡ Final rinse 140 °F/60 °C ¡ Shine and Dry
Time-optimized: ¡ Cleaning 113 °F ¡ Intermediate rinse ¡ Final rinse 127 °F

Usage 1) Hour/min. 2) Electrical/kWH 3) Water/gal ¡ 1) 1:40 – 2:00 ¡ 2) 0.950 – 1.100 ¡ 3) 4.9 – 6.4
¡ 1) 1:50 – 2:20 ¡ 2) 0.810 – 0.850 ¡ 3) 2.5 – 5.4 Note: The displayed cycle time indicates an average value. ¡ 1) 2:20 – 2:25 ¡ 2) 0.680 – 0.790 ¡ 3) 2.3 – 5.6
¡ 1) 1:15 ¡ 2) 0.600 ¡ 3) 3.5
¡ 1) 0:30 ¡ 2) 0.500 ¡ 3) 2.0
¡ 1) 0:09 – 0:09 ¡ 2) 0.050 – 0.050 ¡ 3) 1.2 – 1.2

10

5.1Energy Guide
The Energy Guide label was based on the Normal soil sensing cycle. The unit was tested without any rinse aid (liquid) in the rinse aid dispenser. A single dose of detergent was inserted into the detergent dispenser, with no detergent being used in the prewash. The unit was not subjected to truncated testing per the definitions in the test procedure. We recommend that dish loads such as the one in the energy certification test have the rack position set in the highest position. Recommended for daily, regular or typical use to completely wash a full load of normally soiled dishes. Lower rack

Third rack

Optionsen-us

Upper rack

5.2Personalization function
With this function, you can save a combination of a Cycle and an Option. You can save the selected Cycle and Option combination via the Home Connect app or on the appliance. The pre-rinse cycle is pre-programmed to this button and is fine for all types of dishware. The dishware is rinsed with cold water.
Tip: You can use the Home Connect app to download additional Cycles and Options and save them. 1

Save Personalization function on the appliance.

1. Open the appliance door.

2. Press

.

3. Press the right cycle button.

4. Press the button for the relevant options.

5. Press Personalization Function button for 3 seconds.

a The selected cycle and option will flash. a The Personalization Function button flashes.
a The program combination is saved.

Tip: To reset the cycle, either use the Home Connect app
or reset your appliance back to the factory settings. “Overview of the basic settings”, Page 24

Options

6Options

Options
Here is an overview of the different options available on
your dishwasher.

Option Extra Dry

Use
¡ For a better drying result, the final rinse temperature is increased and the drying phase extended.
¡ Especially suitable for drying plastic parts.

1 Depending on the appliance specifications 11

en-usFeatures Option Intensive
Power

Use
¡ There is a slight increase in energy consumption and the run time is extended.
¡ Switch on with mixed loads containing dishware with different soiling levels, e.g. place very soiled pots and pans in the lower rack and normally soiled dishware in the upper rack.
¡ The spray pressure in the lower rack is increased and the maximum program temperature held longer. This will increase the run time and energy consumption.
¡ The run time is shortened depending on the wash cycle.
¡ The option can be activated before the cycle starts or at any time when it is running.
¡ Energy and water consumption are increased.

3. Press in the right and left hand levers on the outside of the rack.
4. Raise or lower the rack evenly to the right level.

Features

7Features
Features
You can find an overview of the possible features of your appliance and how to use them here. These features depend on your appliance model.
7.1Upper rack
Arrange cups, glasses, and small tableware items in the top rack.

Check that the rack is level on both sides. 5. Release the levers. a The rack clicks into position. 6. Slide the rack in.

You can adjust the height of the upper rack to make room for larger items.
Adjusting upper rack with RackMatic® To wash large items in the racks, adjust the shelf height of the upper rack. 1. Pull out the upper rack. 2. To prevent the rack from suddenly dropping down, hold
the side of the rack by the top edge.
12

7.2Lower rack
Arrange pans and plates in the lower rack.
a
Silverware basket 1

Featuresen-us
7.3Silverware Basket
Arrange the silverware in the silverware basket, ensuring that the items are not nestled together and with the sharp points down.
WARNING The sharp points and edges of knives and other sharp utensils can cause serious injury. Load knives and other sharp utensils with edges down.
Do not allow children to handle or play near knives and sharp utensils

7.4Silverware drawer
Arrange silverware in the silverware drawer.
Large plates up to a diameter of 13 inches can be arranged in the lower rack as shown.

1 Depending on the appliance specifications

Arrange silverware with the points and sharp edges down. You can reorganize the silverware drawer to make more space for longer or wider utensils. Reorganizing the silverware drawer Fold down the side shelves and front tines to provide more space for longer or wider cutlery items.
13

en-usFeatures 1. To fold down a side shelf, push the lever forward and
fold down the side shelf .
1 2

7.5Cup shelf
Use the cup shelf and the space underneath for small cups and glasses or for large items of silverware, e.g. cooking spoons or serving cutlery.

2. To fold down the front tines, push the lever forward and fold down the folding tines .
1

If you do not need the cup shelf, you can fold it up.
7.6Flip tines
Use the flip tines to position dishware securely, e.g. plates.

Tip If you want to return the cutlery tray to its original position, fold the side shelf upward until it clicks into position.
You can fold the tines down to arrange pans, bowls and glasses better.1 Folding down the tines1 If you do not need the tines, fold them down.

1 Depending on the appliance specifications 14

1. Push the lever forward and fold down the tines .

1

2

Featuresen-us
Arrange max. 2 baking sheets and 2 racks as shown to ensure that the spray jet can reach all parts.
Note: Check that the appliance is always operated with the upper rack or the baking sheet spray head.
Inserting the baking sheet spray head Use the baking sheet spray head instead of the upper rack to clean large trays, racks and plates. 1. Remove the upper rack. 2. Insert the baking sheet spray head in the holder and
turn to the right .

2. To use the tines again, fold them back up. a The tines click into position.
7.7Baking sheet spray head
Use the baking sheet spray head to clean large items of dishware, e.g. trays, racks and plates.
a The baking sheet spray head clicks into position.
Removing the baking sheet spray head If you no longer require the baking sheet spray head, remove it from the appliance. 1. Turn the baking sheet spray head to the left and remove
from the holder. 2. Insert the upper rack in the appliance.

7.8Rack heights
Set the racks at the right height.

Appliance height 34″ with silverware basket

Level 1 max. ø 2 max. ø 3 max. ø

Upper rack 9.5″ 10.5″ 11.5″

Appliance height 34″ with silverware drawer

Level 1 max. ø 2 max. ø 3 max. ø

Upper rack 7″ 8″ 9″

Lower rack 13″/13.5″ Page 13 12″ 11″
Lower rack 13″/13.5″ Page 13 12″ 11″

15

en-usBefore using for the first time

Before using for the first time

8Before using for the first time
Before using for the first time
8.1Initial use
Before the first use or after a factory reset, you will need to configure the settings. The display shows the settings for the first use.
Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect® app. “Home Connect® quick start”, Page 25
Requirement: The appliance has been installed and connected.
1. Add special salt. 2. Add rinse aid. Page 17 3. Switch on the appliance. a The display shows the settings for initial use. 4. Press repeatedly until the display shows the required
setting.

Note: If you select Home Connect® with the setting Initial use , make further settings using the Home Connect® app on your mobile device. You can change the settings for initial use and other Basic settings on the appliance at any time or using the Home Connect® app on your mobile device. 5. Press or repeatedly until the display shows the right value.
You can change one or more settings. 6. To save the settings, press for approx. 3 seconds. 7. Add detergent. 8. Start the Program with the highest cleaning temperature
without dishware.
To remove any marks from water or other residues, we recommend you operate the appliance without dishware before using it for the first time.

Water softening system

9Water softening system
Water softening system
Hard water leaves limescale on dishware as well as the washing tank, and parts of the appliance may become blocked. To ensure good dishwashing results, you can treat the water with special salt and the water softening system. To avoid damage to the appliance, water with a hardness above 9 °E must be softened.

9.1Overview of water hardness settings
You can find an overview of the water hardness values that can be selected here. You can find out how hard your water is from your local water company or by using a water hardness tester.

Water hardness °E 0 – 8 9 – 10 11 – 12 13 – 15 16 – 20 21 – 26 27 – 38 39 – 62

Hardness range soft soft medium medium medium hard hard hard

mmol/l 0 – 1.1 1.2 – 1.4 1.5 – 1.8 1.9 – 2.1 2.2 – 2.9 3.0 – 3.7 3.8 – 5.4 5.5 – 8.9

Setting value 0 – 8 9 – 10 11 – 12 13 – 15 16 – 20 21 – 26 27 – 38 39 – 62

Note: Set the water hardness determined on your appliance. “Setting the water softening system”, Page 16 With a water hardness of 0 – 8 °E you can dispense with special salt for dishwashers and switch off the water softening system. “Switching off the water softening system”, Page 17
9.2Setting the water softening system
Set the water hardness on your appliance. 1. Determine the water hardness and the appropriate
setting value. “Overview of water hardness settings”, Page 16

2. Press

.

3. To open the basic settings, press for approx.

3 seconds.

4. Press repeatedly until the display shows “Water

hardness”.

5. Press or repeatedly until the right water hardness

has been set.

The value 0 – 8 is set at the factory. 6. To save the settings, press for approx. 3 seconds.

16

9.3Special Dishwasher Salt
You can use special dishwasher salt to soften the water.
Adding dishwasher salt
If the salt refill indicator lights up, add special dishwasher salt to the dispenser for salt just before the cycle starts. The amount of special dishwasher salt required depends on the water hardness. The higher the water hardness, the greater the amount of salt required.
NOTICE: Detergent may damage the water softening system. Only fill the dispenser of the water softening system
with special dishwasher salt. Special salt for dishwashers can damage the tub due to corrosion. To make sure that any special salt that escapes is
washed out of the tub, add the special salt to the dispenser for special salt immediately before the program starts.
1. Unscrew the lid of the salt dispenser and remove. 2. Before the first use: Fill the dispenser full with water. 3. Note: Only use special salt specified for dishwashers.
Do not use salt tablets. Do not use table salt.
Add the special dishwasher salt to the dispenser.

Rinse aid systemen-us

salt replacement substances can generally only be used up to a water hardness of 26 °E without adding special salt. ¡ The water hardness is 0 – 8 °E. You can omit special salt.

1. Press

.

2. To open the basic settings, press for approx.

3 seconds.

3. Press repeatedly until the display shows “Water

hardness”.

4. Press or repeatedly until the display shows 0 – 8.

5. To save the settings, press for approx. 3 seconds.

a The water softening system is switched off and the salt

refill indicator is deactivated.

Rinse aid system

10Rinse aid system
Rinse aid system
10.1Rinse aid
For optimum drying results, use rinse aid. Only use rinse aid intended for household dishwashers.
Adding rinse aid If the display shows “Please add rinse aid. “, add rinse aid. Only use rinse aid intended for household dishwashers. 1. Press the catch on the lid of the dispenser for rinse aid
and lift .

a

2

Funnel Fill the dispenser completely with the salt. The water in the dispenser is displaced and forced out. 4. Place the lid back on the dispenser and turn to close.
9.4Switching off the water softening system
If you do not need to use the water softening system, e.g. you already have a whole house water softening system, you can turn the system off.
Note To avoid damage to the appliance, only switch off the water softening system in the following cases: ¡ The water hardness is max. 26 °E and you are using
combined detergents with salt replacement substances. According to manufacturers, combined detergents with

1
17

en-usDetergent 2. Add rinse aid up to the max mark.

max

3. If rinse aid spills out, remove it from the tub.
Spilled rinse aid can cause excessive frothing during the wash cycle. 4. Close the lid of the dispenser for rinse aid. a The lid clicks into position.

10.2Setting the amount of rinse aid

If there are streaks or water spots on dishware, change

the amount of rinse aid.

1. Press

.

2. To open the basic settings, press for approx.

3 seconds.

3. Press repeatedly until the display shows “Rinse aid

disp.”.

4. Press or repeatedly until the right amount of rinse

aid has been set.

­ A low setting adds less rinse aid during the wash cycle and reduces streaking on dishware.
­ A higher setting adds more rinse aid during the wash cycle, reduces water spots and improves the drying result.
5. To save the settings, press for approx. 3 seconds.

10.3Switching the rinse aid system off

If you choose not to use rinse aid, you can turn the rinse aid system off.

Tip: Rinse aid within a combination detergent has limited effectiveness. You will generally get better results using a separate rinse aid.

1. Press

.

2. To open the basic settings, press for approx.

3 seconds.

3. Press repeatedly until the display shows “Rinse aid

disp.”.

4. Press or repeatedly until the display shows 0.

5. To save the settings, press for approx. 3 seconds.

a The rinse aid system is switched off and the rinse aid

refill indicator is deactivated.

Detergent

11Detergent
Detergent
Find out which detergents are suitable for your appliance.

11.1The correct detergents

Only use detergents that are made for dishwashers, either basic or combination detergents. For the best washing and drying results, use a separate detergent, then add Special salt and Rinse aid Page 17 separately. Modern, powerful detergents mainly use a low-alkaline formulation with enzymes. Enzymes break down starch and remove protein. Oxygen-based bleaching agents are generally used to remove colored stains, e.g. tea or ketchup.
Note: Follow the manufacturer’s instructions for each detergent.

Detergent Tabs
Powder detergent Liquid detergent

Description
Tabs are perfect for all cleaning functions and do not need to be measured out. However, with shorter Cycles Page 10 sometimes tabs do not dissolve entirely and leave residues of detergent. This may reduce its effectiveness.
Powder detergent is recommended for shorter cycles. The dosage can be adjusted to the level of soiling.
Liquid detergent works faster and is recommended for shorter cycles without a pre-rinse. Sometimes liquid detergent may leak out despite the detergent dispenser being closed. This is not a problem, just remember the following: ¡ Only choose a cycle without
PreRinse. ¡ Do not use the Delay Start option.
The dosage can be adjusted to the level of soiling.

11.2Incompatible detergents

Do not use a detergent which is not designated for dishwasher use or contains chlorine.

Detergent Liquid hand soap
Detergent containing chlorine

Description
Liquid hand soap can cause increased frothing and damage the appliance.
This may leave chlorine residue on dishware.

18

11.3Information on Detergent
Follow the instructions on detergents in everyday use. ¡ Detergents marked as “ecological” (environmentally
friendly) generally contain lower levels of active agents or none at all. The cleaning effect may be reduced. ¡ Adjust the rinse aid and the water softening system settings in accordance with the detergent or combination detergent in use. ¡ According to manufacturers, combination detergents with salt replacement substances can only be used up to a certain water hardness, usually 26 °E, without adding special salt. For the best washing and drying results we recommend using special salt from a water hardness of 17 °E. ¡ Any rinse aid component of a combination detergent has limited effectiveness. You will have better results using a separate rinse aid. ¡ To prevent sticking, only touch detergents in a watersoluble pouch with dry hands and only ever place them in a dry detergent dispenser. ¡ Even if the rinse aid and special salt refill indicators light up, the wash cycles will run properly with combination detergents. ¡ Use tablets with enhanced drying results.
11.4Adding Detergent
1. To open the detergent dispenser, press the locking latch.
2. Add the detergent to the dry detergent dispenser.
3 tbsp (45 ml) 1.75 tbsp
(25 ml)
1 tbsp (15 ml)
If you are using tablets, one is enough. Insert the tablets in a horizontal position. If you are using powder or liquid detergent, follow the manufacturer’s instructions and quantities for dosage in the detergent dispenser. 1.5 to 1.75 Tbsp (20 ml ­ 25 ml) detergent is sufficient for normal soiling. If dishware is only lightly soiled, slightly less than the amount of detergent specified is usually sufficient.

Dishwareen-us 3. Close the lid of the detergent dispenser.

a The lid clicks into position.
a The detergent dispenser will open automatically at the optimum time during the cycle. Powder or liquid detergent will spread around the washing tank and dissolve there. Tablets will fall into the tablet collecting tray and dissolve in the right dosage. In order to ensure that tablets can dissolve evenly, do not place any other objects in the tablet collecting tray.

11.5Detergent table

Detergent amount guidelines

Auto 130-150°F Eco Glass Care Auto 150-160°F Quick Wash

1.75 Tbsp (25 ml) or 1 tab 1.75 Tbsp (25 ml) or 1 tab 1 Tbsp (15 ml) 3 Tbsp (45 ml) or 1 tab 1 Tbsp (15 ml)

Dishware
12Dishware
Dishware
Only wash dishware that is suitable for dishwashers.
Note: Decorated glassware and parts made of aluminum or silver may fade or discolor with dishwashing. Delicate types of glass may turn cloudy after a few wash cycles.

12.1Damage to glass and dishware

Only put glasses and china in the dishwasher if they are labeled dishwasher- safe. Avoid damage to glass and dishware.

Cause
The following types of dishes are not dishwashersafe: ¡ Wooden utensils and
dishes ¡ Decorative glassware,
antique dishes and artistic hand-made pottery

Recommendation
Only put dishes in the dishwasher if they are labeled dishwasher-safe.

19

en-usDishware

Cause

Recommendation

¡ Plastic parts that are not heat-resistant
¡ Dishes made from copper or tin
¡ Dishes soiled with ash, wax, grease or paint
¡ Very small items of dishware

The chemical composition of the detergent causes damage.

Use a detergent labeled as gentle to dishes.

Highly caustic alkaline or highly acidic cleaning solutions, in particular commercial or industrial cleaners, are not safe to use in the dishwasher with aluminum.

If you use highly caustic alkaline or highly acidic cleaning solutions, in particular commercial or industrial cleaners, do not put anything aluminum in the dishwasher.

The water temperature of the cycle is too high.

Select a cycle with lower temperatures. After the cycle has ended, take glassware and silverware out of the appliance without delay.

The water temperature of Select a cycle with lower

the cycle is too high and the temperatures.

water is too soft.

Use detergent with glass

protection.

Adjust the water hardness

setting on your dishwasher.

“Setting the water

softening system”, Page 16

12.2Loading dishware
Arrange dishware correctly to optimize the dishwashing result and prevent damage to both dishware and the appliance. The noise level may also vary depending on the items placed in your dishwasher.
NOTICE: Avoid dishwasher damage Do not load the dishwasher with paper products, plastic
bags, packing materials or anything other than normal, dishwasher safe dishware and kitchenware.
Tips ¡ Using the appliance allows you to save energy and
water compared to doing dishes by hand. ¡ See our website for examples of how to load your
appliance efficiently. ¡ To save energy and water, load the machine with the
number of place settings specified (standard load with dishes and silverware).

¡ For better washing and drying results, position items with curves or recesses at an angle so water can run off.
1. Remove large remnants of food from dishware. To save resources, do not pre-rinse dishware under running water.
2. Observe the following when arranging dishware: ­ Put heavily soiled dishware in the lower rack, e.g. pans. The more powerful spray jet ensures that the dishwashing result will be better. ­ To avoid damage to dishware, arrange it so it is stable and cannot tip over. ­ To avoid injury, arrange silverware with the points and sharp edges facing down. ­ Position containers with the openings facing down so no water can collect in them. ­ Do not block the spray arms – make sure that they can turn freely. ­ Do not place small parts in the collecting tray and do not block it with dishware so as not to obstruct the lid of the detergent dispenser.

20

12.3Removing dishware
CAUTION Dishes can be very hot immediately after the cycle ends. Open the door slightly and allow dishes to cool for a few
minutes before unloading.
1. To prevent water dripping onto dishware, unload it starting at the bottom and working up.
2. Check the washing tank and accessories for soiling and clean if necessary. “Cleaning and maintenance”, Page 26
12.4Loading patterns
Recommended loading patterns.
12 place settings: Lower rack

Third rack

Dishwareen-us

Additional loading patterns for 10 place settings: Lower rack

Upper rack

Upper rack

21

en-usBasic Operation Third rack

Basic Operation

13Basic Operation

Basic Operation

13.1Protection against unintentional operation

Your dishwasher has a built in feature to help prevent

unintentional operation, e.g. by children. After starting the

appliance, the door has to be closed within 4 seconds,

otherwise the operation will be paused. If this occurs,

follow the steps below to restart your dishwasher.

1. For top button controls: Press

and close the door.

2. For front button controls: Close the door and press .

a The wash cycle will resume.

Notes ¡ Unintentional operation is activated when:
­ Pressing Start to begin a wash cycle ­ Setting Delay time and pressing Start ­ Opening the door while Delay time is active ­ Opening the door during a wash cycle. ¡ This feature cannot be deactivated.

13.2Switching on the appliance

Touch

with a short 1 second touch.

The standard cycle is set by default.

The buttons on the appliance are touch sensitive and

only require a quick, gentle touch.

If you do not perform any actions on the appliance for

10 minutes, it will automatically switch off.

13.3Setting a cycle
To adjust the wash cycle to the soiling level of the dishware, select a suitable program. Press the right cycle button. a The cycle is set and the cycle button flashes.

13.4Setting options
You can set options to complete the chosen wash program.
Note: The available options depend on which program is selected.
Press the button for the relevant option. a The option is set and the option button flashes.

13.5Setting the electronic delay time
You can delay the start of the wash cycle by up to 24 hours. 1. Press . 2. Press or repeatedly until the display shows the
right time.
Depending on the setting of the time display, the end of the program is shown on the display by “Finish in” (e.g. 3h 25min) or “Finish at” (e.g. 3:20pm). You can change this setting in the Basic settings Page 24. 3. To activate the electronic delay time, press .
Note: To deactivate the electronic delay time, press for approx. 4 seconds.

13.6Starting the wash cycle
Press . a The wash cycle has ended when the display shows
“Finished!”.
Notes ¡ If you want to add more dishware while the appliance is
running, do not use the collecting tray as a handle for the upper rack. You might touch the partially dissolved tablet. ¡ You can only change a cycle in progress if you can cancel it first. “Terminating the wash cycle”, Page 22 ¡ To save energy, the appliance switches off automatically 10 minutes after the end of the wash cycle. If you open the appliance door immediately after the wash cycle has ended, the appliance will switch off after 4 seconds.

13.7Interrupting the wash cycle

1. Press On/Off.

The program is saved and the appliance switches off.

2. Press On/Off.

3. Press

to resume the wash cycle.

13.8Terminating the wash cycle

To end a cycle early or to switch from one that has already

started, you will need to cancel it first.

1. Open the appliance door.

2. Press

for approx. 4 seconds.

22

3. Close the appliance door. a The cycle is cancelled and ends after approx. 1 minute.
13.9Displaying wash cycle information
You can show information about cycles and options on the display. 1. Press . 2. Press the cycle button or an option.
13.10Switching off the appliance
CAUTION To avoid risk of injury, always use caution when opening the door during or following a wash cycle as hot water or steam may escape. Do not fully open the door until water noises have
stopped and steam has subsided.
1. Please note the information on Preventing Material Damage Page 6.
2. Press On/Off.

Basic Operationen-us

23

en-usBasic settings

Basic settings

14Basic settings
Basic settings
You can configure the basic settings for your appliance to meet your needs.

14.1Overview of the basic settings
The basic settings depend on the features of your appliance.

Basic setting Time setting Time format Time display
Sprache/Language Water hardness Rinse aid disp. Sensor setting Extra Dry
Eco forecast Emotion LightTM Infolight®

Selection 00:00 – 24:00
12 h 24 h1 In hours Time1
See selection on the appliance. 0 – 62 0 – 81 0 – 6 51 Standard1 Sensitive Very sensitive on off1
on off1
off On via main switch1 On when opening door on1 off

Start program Tone volume

Auto 130-150°F1 Prog. last selected
Scale with multiple levels.

Button volume

Scale with multiple levels

1 Factory setting (may vary according to model)

Description
Set the current time. The setting depends on the time format selected.
Set the time format.
Set the time display for the end of the wash cycle. “Finish in” shows the remaining time the wash cycle still has to run, e.g. 3h 25min. “Finish at” shows the time when the wash cycle will end, e.g. 3:20pm.
Select the menu language.
Set the water hardness. “Overview of water hardness settings”, Page 16
Set or switch off the amount of rinse aid to be dispensed. “Setting the amount of rinse aid”, Page 18
Set the water sensor for identifying soiling. “Sensors”, Page 6
Switch “Extra Dry” on or off for each operation. The temperature is increased during the final rinse for a better drying result. This may increase the run time slightly. Please take care with delicate dishware.
Switch EcoCheck on or off. When selecting the wash cycle, the average water and energy consumption is briefly shown on the display.
Switch the interior lighting of the appliance on or off. When the appliance door is opened, the interior lighting switches off automatically after 10 minutes.
Switch “Infolight®” on or off. While the wash cycle is running, a spot of light is projected onto the floor below the appliance door. This light will not be visible if the appliance is installed at eye level with the cabinet front fitted flush. If the appliance door is not completely closed, the spot of light will flash. The wash cycle has ended when the spot of light is no longer visible on the floor.
Set a default program for when the appliance is switched on.
Set the signal volume at the end of a wash cycle. Level 0 switches the signal tones off.
Set the button volume during operation. Level 0 switches the button tones off.

24

Home Connect®en-us

Basic setting WLAN

Selection
on off

Remote Start

off Manual Permanent

Greeting Factory setting

on1 off
Reset

1 Factory setting (may vary according to model)

Description
Switch the wireless network connection on or off. The basic setting “WLAN” is not available until you have connected the appliance with the Home Connect® app. “Home Connect® “, Page 25
Activate or deactivate “Remote Start “, Page 26. The basic setting is not available until you have connected the appliance with the Home Connect® app. “Home Connect® “, Page 25
Switch display of the brand name logo on or off when the appliance is switched on.
Restore changed settings to the factory settings. The settings for initial use must be configured.

14.2Changing the basic settings

Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect® app. “Home Connect® quick start”, Page 25

1. Open the appliance door.

2. Press

.

3. To open the basic settings, press for approx.

3 seconds.

4. Press repeatedly until the display shows the required

setting.

5. Press or repeatedly until the display shows the

right value.

You can change one or more settings. 6. To save the settings, press for approx. 3 seconds. 7. Close the appliance door.

14.3Setting the time
1. To open the basic settings, press for approx. 3 seconds.
2. Press repeatedly until the display shows “Time setting”.
3. Press or repeatedly until the display shows the required time.
Holding down and will change the set values in 10minute steps. 4. To save the settings, press for approx. 3 seconds.

Home Connect®

15Home Connect®
Home Connect®
This appliance is network-capable. Connecting your appliance to a mobile device lets you control its functions via the Home Connect® app. The Home Connect® services are not available in every country. The availability of the Home Connect® function depends on the availability of Home Connect® services in your country. You can find information on this at: www.home- connect.com. To be able to use Home Connect®, you must first set up the connection to the WLAN home network (Wi-Fi 1) and to the Home Connect® app.
The Home Connect® app guides you through the entire registration process. Follow the instructions in the Home Connect® app to implement the settings.
Tips ¡ Consult the Home Connect® documents supplied. ¡ Follow the instructions in the Home Connect® app as
well.
Note: Also note the safety information in this instruction manual and ensure that it is also observed when operating the appliance using the Home Connect® app.
15.1Home Connect® quick start
Connect your appliance to a mobile device quickly and easily.
Setting up the Home Connect® app 1. Install the Home Connect® app on your mobile device. 2. Start the Home Connect® app and set up access for
Home Connect®.
The Home Connect® app guides you through the entire registration process.

1 Wi-Fi is a registered trade mark of the Wi-Fi Alliance. 25

en-usCleaning and maintenance

Setting up Home Connect®
Requirements ¡ The Home Connect® app is installed on your mobile
device. ¡ The appliance receives signals from the WLAN home
network (Wi-Fi) at its installation location.
1. Open the Home Connect® app and scan the following QR code.

15.4Remote Diagnostics
The Customer Service can access your appliance via Remote Diagnostics if you ask them to do so, if your appliance is connected to the Home Connect® server and if Remote Diagnostics is available in the country where you are using the appliance.
Tip: Further information and details about the availability of Remote Diagnostics in your country can be found in the Service/Support section of your local website: www.homeconnect.com.

15.5Software update
You can use this function to update the software of your appliance, e.g. for optimization, troubleshooting or safetyrelevant updates. The Home Connect® app informs you about available software updates.

2. Follow the instructions in the Home Connect® app.
15.2Home Connect® settings
Adapt Home Connect® to your needs. You can find the Home Connect® settings in the basic settings for your appliance. Which settings the display shows will depend on whether Home Connect® has been set up and whether the appliance is connected to your home network.
15.3Remote Start
You can use the Home Connect® app to start the appliance with your mobile device.
Tip: If you select “Permanent” in the Basic settings Page 25 of this function, the function is permanently activated, and you can start your appliance with a mobile device at any time.
Activating Remote Start When you have selected “Manual” in the basic settings of this function, activate the function on your appliance.
Requirements ¡ The appliance is connected to your WLAN home
network. ¡ The appliance is connected to the Home Connect® app. ¡ “Manual” is selected in the Basic settings Page 25 of
this function. ¡ A program is selected.
Press . If you open the appliance door, the function is automatically deactivated.
a button lights up.
Tip: To deactivate the function, press .

15.6Data Protection
Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect® server (initial registration): ¡ Unique appliance identification (consisting of appliance
codes as well as the MAC address of the installed Wi-Fi communication module). ¡ Security certificate of the Wi-Fi communication module (to ensure a secure data connection). ¡ The current software and hardware version of your appliance. ¡ Status of any previous reset to factory settings.
This initial registration prepares the Home Connect® functions for use and is only required when you want to use the Home Connect® functions for the first time.
Note: Please note that the Home Connect® functions can be utilized only with the Home Connect® app. Information on data protection can be called up in the Home Connect® app.

Cleaning and maintenance

16Cleaning and maintenance
Cleaning and maintenance
To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
16.1Cleaning the tub
WARNING Using detergents containing chlorine may result in harm to health. Never use detergents containing chlorine.
1. Remove any heavy soiling in the interior with a damp cloth.
2. Add detergent to the detergent dispenser. 3. Select the program with the highest temperature.

26

4. Start the program without dishware. Page 22

16.2Cleaning agent
Only use suitable cleaning agents to clean your appliance. “Preventing material damage”, Page 6

16.3Tips on appliance care

Follow the tips on appliance care to make sure your appliance functions properly at all times.

Action

Benefit

Regularly wipe the door seals, the front of the dishwasher and the control panel using a damp cloth and dishwashing liquid.

This ensures the parts of the appliance will remain clean and hygienic.

If the appliance is not going This will prevent unpleasant

to be used for a while,

odors.

leave the door slightly ajar.

16.4Filter system
The filter system removes coarse soiling from the dishwashing cycle.

Cleaning and maintenanceen-us 2. Turn the coarse filter counterclockwise and take out
the filter system . Ensure that foreign objects do not fall into the sump.
2
1
3. Pull the micro filter downward and off.

3

2
1
1 Micro filter 2 Fine filter 3 Coarse filter
Cleaning filters Debris in the rinsing water can block the filters. 1. Check the filters for residues after each dishwashing
cycle.

4. Press the locking catches together and take the coarse filter upward and out .
2
1
5. Clean the filter elements under running water. Carefully remove the rim of debris between the coarse filter and the fine filter.
6. Put the filter system back together. Ensure that the locking catches on the coarse filter click into position. 27

en-usCleaning and maintenance
7. Insert the filter system into the appliance and turn the coarse filter clockwise. Ensure that the arrow markings match up.

3. Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign objects.
4. Insert the lower spray arm.
a The spray arm clicks into position. 5. Insert the upper spray arm and screw firmly in place.

16.5Cleaning the spray arms
Limescale and soiling in the dishwashing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. 1. Unscrew the upper spray arm and pull down to
remove .
1
2
2. Pull up the lower spray arm to remove.

28

Troubleshootingen-us

Troubleshooting

17Troubleshooting

Troubleshooting
You can eliminate minor issues on your appliance yourself. Please read the information on eliminating issues before contacting Customer Service. This may avoid unnecessary repair costs.

Issue

Cause and troubleshooting

E:2060 lights up.

Appliance has detected that the heating element is calcified. 1. Descale the appliance. 2. Operate the appliance with the Water softening system.1

E:3000 lights up.

Water protection system is activated. 1. Turn off the water faucet. 2. Call customer service Page 38.

E:3100 lights up.

Water protection system is activated. 1. Turn off the water faucet. 2. Call customer service Page 38.

E:3200 or indicator for water supply lights up.

Inlet hose is kinked. Install the inlet hose without kinks.
Water faucet is turned off. Turn on the faucet.
Water faucet is clogged or calcified. Turn on the faucet.
The flow rate must be at least 10 l/min when the water supply is open.

Filters in the water connection of the supply or AquaStop hose are blocked. 1. Switch off the appliance. 2. Pull out the power cord plug. 3. Turn off the water faucet. 4. Unscrew the water connection. 5. Remove the filter from the supply hose.

E:3400 lights up.

6. Clean the filter. 7. Reinsert the filter in the supply hose. 8. Screw the water connection back on. 9. Check the water connection for leaks. 10.Restore the power supply. 11.Switch the appliance on.
Water is continuously running into the appliance. 1. Turn off the water faucet. 2. Call customer service Page 38.

1 Depending on the appliance specifications 29

en-usTroubleshooting
Issue E:6102 lights up.

Cause and troubleshooting
Not an appliance error. The drain pump cover is loose or a foreign object is blocking the pump. Secure the cover of the drain pump so it clicks into place or clean the drain
pump.

E:6103 lights up. Water is not draining.

Not an appliance error. Garbage disposal is still plugged or the drain hose is kinked.
Check that the garbage disposal plug is removed and that the drain hose is not kinked.

Not an appliance error. The drain pump cover is loose or a foreign object is blocking the pump.
Secure the cover of the drain pump so it clicks into place or clean the drain pump.

E:9001 lights up.

Not an appliance error. High loop is missing and/or debris flushed back into drain hose and blocked it. Be sure there is a high loop in the drain hose and that no debris has flushed back
into the hose.
Power voltage is too low. There is no problem with the appliance. 1. Call an electrician. 2. Have the power voltage and electrical installation checked by an electrician.

30

Issue E:9240 lights up.

Cause and troubleshooting
Filters are soiled or blocked. Clean the filters.
“Cleaning filters”, Page 27

Troubleshootingen-us

A different error code appears in the display window. E:0100 to E:9010
Dishware is not dry.

There is a technical issue.

1. Press

.

2. Pull out the power cord plug of the appliance or switch off the breaker.

3. Wait at least 2 minutes.

4. Insert the power cord plug of the appliance in a power outlet or switch on the breaker.

5. Switch the appliance on.

6. If the problem occurs again:

Press

.

Turn off the water faucet.

Pull out the power cord plug.

Contact customer service Page 38 and give the error code.

No rinse aid used or dosage set too low. 1. Add Rinse aid Page 17.
2. Set the amount of rinse aid to be dispensed. “Setting the amount of rinse aid”, Page 18

Cycle or cycle option has no drying phase, or drying phase is too short. Select a wash cycle with drying. Page 10
Some option buttons decrease the drying result.

Water collects in recesses of dishware or silverware. Position dishware at an angle where possible.

The combined detergent used has a poor drying performance. 1. Use rinse aid to improve drying performance. 2. Use a different combined detergent with a better drying performance.
Extra Dry/intensive drying not activated to improve drying performance. Activate Extra Dry/intensive drying Page 24.
Dishware removed too early or drying process not yet ended. 1. Wait until the program ends. 2. Only remove dishware 30 minutes after the program has ended.
Rinse aid used has a limited drying performance. Use a name-brand rinse aid.
Eco products may have limited effectiveness.
31

en-usTroubleshooting Issue Silverware is not dry.
Appliance interior still wet after wash cycle.
Food remnants on dishware.

Cause and troubleshooting
Silverware not arranged properly in the silverware basket or silverware drawer. Droplets can form on the contact points of silverware. 1. Arrange silverware individually where possible. Page 20 2. Avoid points of contact.
Not an error. Condensation drying creates water droplets in the tub. This is normal. Moisture in the air condenses on the inside walls of the appliance, runs off, and is pumped out. No action required.
Dishware was placed too close together or rack is overfilled. 1. Arrange dishware with sufficient space in between.
The spray jets must reach the surfaces of the dishware. 2. Avoid points of contact.
Spray arm rotation of the lower spray arm is blocked. Arrange dishware so it does not obstruct spray arm rotation.
Spray arm nozzles are blocked. Clean the Spray arms Page 28.

Filters are dirty. Clean the filters.
“Cleaning filters”, Page 27

Filters are inserted incorrectly and/or not engaged. 1. Insert the filters properly.
“Filter system”, Page 27 2. Twist filters into place.
Selected wash cycle is too light. Select a more intensive wash program. Adjust the sensitivity of the sensors.
“Sensors”, Page 6
Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. Only remove large remnants of food and do not pre-rinse dishware. Adjust the sensitivity of the sensors.
“Sensors”, Page 6
Tall narrow containers in corner areas are not rinsed out adequately. Do not position tall narrow containers at too great an angle or in corner areas. Upper rack on right and left not set to same height.
32

Troubleshootingen-us

Issue

Cause and troubleshooting

Food remnants on dishware.

Set the upper rack on the left and right to the same height. “Upper rack”, Page 12

Detergent residue in the appliance

Lid of the detergent dispenser is blocked by items of dishware and will not open. 1. Arrange dishware in the upper rack so the tab collecting tray is not obstructed by
dishware. “Loading dishware”, Page 20
Items of dishware are blocking the dispenser lid. 2. Do not place dishware or fragrance dispensers in the tab collecting tray.

Water spots on plastic parts.

The lid of the detergent dispenser is blocked by the tab and will not open. Position the tab in the detergent dispenser crosswise, not vertically.
Tabs are used in the quick or short cycle. There is not enough time for the tab to dissolve. Select a more intensive Wash cycle or use Powder detergent.
Detergent may lose its cleaning or dissolving ability after being stored a long time, or the detergent is clumped together. Change your Detergent.
Droplet formation on plastic surfaces is unavoidable due to the laws of physics. Water spots are visible after drying. Select a more intensive program. Position dishware at an angle.
“Loading dishware”, Page 20
Use rinse aid. “Rinse aid”, Page 17
Set the water softening system higher. “Setting the water softening system”, Page 16

Wipeable or water-soluble coatings There is detergent residue. These coatings cannot generally be removed with

inside the appliance or on the

chemicals.

door.

Change your Detergent.

Scrub the appliance by hand.

White coating is deposited inside the appliance. 1. Adjust the water softening system correctly.
“Setting the water softening system”, Page 16
In most cases you will need to increase the setting. 2. If necessary, change your detergent.

There are stubborn white coatings on the dishware, inside the appliance or on the door.

Special salt dispenser is not screwed tight. Screw the special salt dispenser tight.
There is detergent residue. These coatings cannot generally be removed with chemicals. Change your Detergent. Scrub the appliance by hand.

Hardness range is set incorrectly or the water hardness is too high. Set the Water softening system to the water hardness or add special salt.
3in1/organic/eco detergent is not effective enough. Set the Water softening system to the water hardness and use separate
detergents (name brand, special salt, rinse aid).

Too little detergent is being used. Increase the amount of detergent used or change Detergent .

Selected wash cycle is too light. Select a more intensive wash program.

33

en-usTroubleshooting

Issue
There are stubborn white coatings on the dishware, inside the appliance or on the door.
Tea residue or lipstick marks on dishware.

Cause and troubleshooting Adjust the sensitivity of the sensors.
“Sensors”, Page 6
Dishwashing temperature is too low. Select a program with a higher dishwashing temperature.

Too little detergent is being used or is unsuitable.
Use a suitable Detergent and follow the manufacturer’s instructions for the amount to be used.

Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. Only remove large remnants of food and do not pre-rinse dishware. Adjust the sensitivity of the sensors.
“Sensors”, Page 6

There are colored coatings (blue, The formation of films is due to substances contained in vegetables (cabbage,

yellow, brown) inside the appliance celery, potatoes, noodles, etc.) or tap water (manganese).

or on stainless steel dishware that Clean the appliance.

are difficult or impossible to remove.

You can remove coatings with Mechanical cleaning Page 26 or a machine cleaning product. It may not always be possible to completely remove coatings

but they are harmless to health.

The formation of films is due to metal components on silver or aluminum dishware. Clean the appliance.
You can remove coatings with Mechanical cleaning Page 26 or a machine cleaning product. It may not always be possible to completely remove coatings but they are harmless to health.

There are colored deposits (yellow, The formation of films is due to ingredients of food remnants and tap water

orange, brown) that are ey to

(limescale), “soaplike”.

remove inside the appliance

1. Check the setting of the water softening system.

(mainly at the bottom).

“Setting the water softening system”, Page 16

2. Add special salt. 3. If you are using combined detergents (tabs), activate the water softening system.

Follow the information on detergents.

Plastic parts inside the appliance are discolored.

Plastic parts inside the appliance may become discolored over the life of the dishwasher. Discoloration may come about and will not impair functioning of the appliance.

Plastic parts are discolored.

Dishwashing temperature is too low. Select a program with a higher dishwashing temperature.
Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. Only remove large remnants of food and do not pre-rinse dishware. Adjust the sensitivity of the sensors.
“Sensors”, Page 6

There are removable streaks on Amount of rinse aid to be dispensed is set too high.

glasses, glassware with a metallic Set the rinse aid system to a lower setting.

appearance and silverware.

“Setting the amount of rinse aid”, Page 18

No rinse aid has been added. Add rinse aid.
“Adding rinse aid”, Page 17

There is detergent residue in the final rinse. Lid of detergent dispenser is blocked by dishware and will not open fully.

34

Troubleshootingen-us

Issue
There are removable streaks on glasses, glassware with a metallic appearance and silverware.

Cause and troubleshooting
1. Arrange dishware in the upper rack so the tab collecting tray is not obstructed by dishware. “Loading dishware”, Page 20
Items of dishware are blocking the dispenser lid. 2. Do not place dishware or fragrance dispensers in the tab collecting tray.

Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. Only remove large remnants of food and do not pre-rinse dishware. Adjust the sensitivity of the sensors.
“Sensors”, Page 6

Irreversible clouding of glassware.

Glasses are not dishwasher-proof, only suitable for dishwashers. Use dishwasher-proof glasses.
Glasses are usually only suitable for cleaning in a dishwasher, i.e. long-term wear or long-term changes must be expected.
Avoid a lengthy steam phase (standing time after wash cycle ends). Use a program with a lower temperature. Set the softening system to the water hardness.
“Setting the water softening system”, Page 16
Use detergent with a glass protection component.

Detergent residue is present in the detergent dispenser or the tab collecting tray.

Spray arms were blocked by dishware so detergent was not rinsed out. Check that the spray arms are not blocked and can rotate freely.
Detergent dispenser was damp when detergent was added. Only add detergent to the detergent dispenser when dry.

Excessive formation of foam occurs.

Hand soap got in the rinse aid dispenser. Immediately add rinse aid to the dispenser.
“Adding rinse aid”, Page 17

Rinse aid has been spilled. Remove the rinse aid with a cloth.

Detergent or machine care product used causes excessive foaming. Change the brand of detergent.

Connection to home network is not WLAN on router is not active.

established.

Check the wireless network connection of your router.

WLAN display is flashing.

Connection to home network is not available. Activate the wireless network connection on your router.

Home Connect cannot be implemented correctly.

Home Connect set incorrectly. Please consult the documents supplied for Home Connect®.

There is a technical error.
Please consult the information on support in the documents supplied for Home Connect®.

Special salt refill indicator lights up. Insufficient special salt. Add Special salt.
Sensor does not detect special salt tablets. Do not use special salt tablets.

Refill indicator for special salt does Water softening system is switched off.

not light up.

Set the water softening system. “Setting the water softening system”, Page 16

35

en-usTroubleshooting

Issue
Refill indicator for rinse aid lights up.

Cause and troubleshooting
No rinse aid. 1. Add Rinse aid Page 17. 2. Set the amount of rinse aid to be dispensed.
“Setting the amount of rinse aid”, Page 18

Refill indicator for rinse aid does not light up.

Rinse aid system is switched off. Set the amount of rinse aid.
“Setting the amount of rinse aid”, Page 18

All LEDs light up or flash.

Electronics have detected a fault. 1. Press the main switch button for approx. 4 seconds.
“Controls”, Page 8
The appliance is reset and restarted. 2. If the problem occurs again:
Switch off the appliance. Unplug the power plug or switch off the circuit breaker in the fuse box. Wait at least 2 minutes. Switch on the circuit breaker in the fuse box or plug in the power plug. Switch on the appliance. 3. If the problem occurs again:
Contact customer service. “Customer Service”, Page 38

Water is left in the appliance at the Filter system or area under the filters is blocked.

end of the program.

1. Clean the Filters Page 27.

2. Clean the Drain pump Page 37.

Program has not yet ended. Wait until the program ends or terminate the program with Reset. “Terminating the wash cycle”, Page 22

Appliance cannot be switched on or operated.

Software update is taking place. Wait until the software update has finished.
Appliance functions have failed. 1. Pull out the power cord plug or switch off the breaker. 2. Wait at least 2 minutes. 3. Connect the appliance to the power supply. 4. Switch the appliance on.

Appliance does not start.

The breaker has tripped. Check the relevant breaker.
Power cord is not inserted. 1. Check whether the power outlet is working. 2. Check whether the power cord plug is properly inserted in the power outlet and
on the rear of the appliance.

Wash cycle starts up automatically.

Appliance door is not closed properly. Close the appliance door.
You did not wait until the cycle ended. “Terminating the wash cycle”, Page 22

Appliance stops during the cycle or Appliance door is not closed properly.

cuts out.

Close the appliance door.

Power and/or water supply has been interrupted. 1. Check the power supply. 2. Check the water supply.

36

Troubleshootingen-us

Issue

Cause and troubleshooting

Appliance stops during the cycle or Upper rack is pressing against inner door and preventing appliance door from being

cuts out.

closed securely.

Check whether the rear panel of the appliance is being pressed in by a power outlet or a hose holder that has not been removed.

Arrange the dishware so that no parts project beyond the rack and prevent the appliance door from closing properly.

Appliance door cannot be closed. Door lock has been activated. Close the appliance door with greater force.

Door cannot be closed due to installation method. Check whether the appliance has been installed properly.
When closed, the appliance door, its decor or attached parts should not knock against adjacent cabinets or the worktop.

Lid on the detergent dispenser cannot be closed.

Detergent dispenser or lid are blocked by sticky detergent residue. Remove detergent residue.

Filling valves making knocking noises.

Caused by the domestic installation. No fault present in the appliance. Does not affect functioning of the appliance. Can only be remedied in the home installation.

Noise level varies

The noise level can vary, depending on what kind of dishes are loaded and where they are placed.
Make sure the dishware is loaded in the most secure way, resting on the tines and not hitting each other. “Loading dishware”, Page 20

Spray arm is striking dishes. Arrange dishware so the spray arms do not strike dishware.

With a small load the water jets directly strike against the tub. Distribute the dishware evenly. Load the appliance with more dishware.

Light items of dishware move about during the wash cycle. Position light items of dishware securely.

17.1Clean drain pump
Large food remnants or foreign objects can block the drain pump. As soon as the dishwashing water no longer drains properly, the drain pump must be cleaned.
CAUTION There may be some sharp debris, such as glass fragments, blocking the drain pump. Use caution when removing parts for cleaning.
1. Disconnect the appliance from the power supply. 2. Remove the upper and lower rack. 3. Remove the filter system. 4. Scoop out any water.
Use a sponge if necessary.

5. Pry the pump cover off using a spoon and grip it by the crosspiece.

6. Lift the pump cover diagonally inward and take it out. a Now you can reach the impeller with your hand. 7. Remove any food remnants or foreign objects in the
area of the impeller.
37

en-usTransportation, storage and disposal 8. Insert the pump cover and press down .
2 1
a The pump cover clicks into position. 9. Install the filter system. 10.Insert the upper and lower rack.

Transportation, storage and disposal

18Transportation, storage and disposal
Transportation, storage and disposal
18.1Removing the appliance
1. Disconnect the appliance from the power supply. 2. Turn off the water faucet. 3. Detach the drain connection. 4. Detach the water connection. 5. Loosen any screws fastening the appliance to cabinet
parts. 6. Remove the base panel if fitted. 7. Pull the appliance out carefully, along with the hose
behind it.
18.2Vacation and Storage
NOTICE: Preparing your unit for vacation Before leaving for vacation during warmer weather,
besides turning off the main valve, also turn off water supply at the nearest point to the dishwasher. During colder weather, please follow the instructions for winterizing your unit below. Winterizing your unit If your dishwasher will be unused for an extended period of time in a location that experiences freezing temperatures (vacation home or through a vacation period), have your dishwasher winterized by an authorized service provider.
38

18.3Transporting the appliance
To avoid damage to the appliance, empty it before transporting.
Note: Always transport the dishwasher upright to prevent residual water getting into the machine’s controls and damaging the appliance.
1. Remove dishware from the appliance. 2. Secure loose parts. 3. Switch on the appliance. 4. Select the cycle with the highest temperature. 5. Start the cycle. Page 22 6. To drain the appliance, terminate the cycle after approx.
4 minutes. “Terminating the wash cycle”, Page 22 7. Switch off the appliance. 8. Turn off the water faucet. 9. To empty the residual water out of the appliance, detach the supply hose and let the water drain out.
18.4Disposal of your old appliance
Environmentally sound disposal allows valuable raw materials to be recycled.
WARNING Avoid a risk of entrapment upon disposal. Unplug the appliance from the power outlet. Cut the power cord and remove the door upon
discarding the appliance.
Check your local area for large appliance recycling programs.
Customer Service
19Customer Service
Customer Service
With any warranty repair, we will make sure your appliance is repaired by an authorized service provider using genuine replacement parts. We use only genuine replacement parts for all repairs. Detailed information on the warranty period and terms of warranty can be found in the Statement of Limited Product Warranty, from your retailer, or on our website. If you contact Customer Service, you will need the model number (E-Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) of your appliance. USA: 1-877-442-4436 www.gaggenau.com www.gaggenau.com/us/appliances/eshop CA: 1-877-442-4436 www.gaggenau.com www.gaggenau.ca For assistance with connecting to Home Connect®, you can also view instructions here: www.home- connect.com/us/en/help-support/set-up

19.1Model number (E-Nr.), production number (FD) and consecutive numbering (Z-Nr.)
You can find the model number (E-Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) on the appliance’s rating plate. The rating plate is located inside the appliance door. Making a note of your appliance’s details and the Customer Service telephone number will enable you to find them again quickly.
19.2AquaStop® Pledge
In addition to the standard warranty provided by BSH, BSH will also compensate customers for damage caused by a specific fault in the AquaStop system giving rise to a valid warranty claim. Compensation will be provided under the following conditions: ¡ If water damage is caused by a defect in materials or
workmanship in the AquaStop system, BSH will compensate customers reasonable and verifiable damages. ¡ A condition of all warranty claims is the appliance with AquaStop must have been installed and connected correctly in accordance with all instructions; this also includes a properly installed AquaStop extension (genuine accessories). The warranty does not cover defective feed lines or fittings leading to the AquaStop connection at the tap.

Customer Serviceen-us

39

en-usTechnical specifications

Technical specifications
20Technical specifications
Technical specifications
Weight Voltage Power rating Fuse Water pressure
Inlet rate Water temperature
Load capacity

Max.: 60 kg/132 lbs 120 V, 60 Hz 1440 W 12 A ¡ Min. 7.25 psi (50 kPa) ¡ Max. 145 psi (1000 kPa) Min. 2.6 gal/min Cold water. Hot water max.: 140 °F/ (60 °C) 13 place settings

20.1Information regarding Free and Open Source Software
This product includes software components that are licensed by the copyright holders as free or open source software. The applicable license information is stored on your home appliance. You can also access the applicable license information via your Home Connect® app: “Profile -> Legal information -> License Information”.1 You can download the license information on the brand product website. (Please search on the product website for your appliance model and additional documents). Alternatively, you can request the relevant information from ossrequest@bshg.com or BSH Hausgeräte GmbH, CarlWery-Str. 34, 81739 Munich, Germany. The source code will be made available to you on request. Please send your request to ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str.34, 81739 Munich, Germany. Subject: ,,OSSREQUEST” The cost of performing your request will be charged to you. This offer is valid for three years from the date of purchase or at least as long as we offer support and spare parts for the relevant appliance.
STATEMENT OF LIMITED PRODUCT WARRANTY
21STATEMENT OF LIMITED PRODUCT WARRANTY
STATEMENT OF LIMITED PRODUCT WARRANTY
21.1What this warranty covers & Who it applies to
The limited warranty provided by BSH Home Appliances (“Gaggenau”) in this Statement of Limited Product Warranty applies only to the Gaggenau appliance sold to you (“Product”), provided that the Product was purchased: ¡ For your normal, household (non-commercial) use, and
has in fact at all times only been used for normal household purposes.

¡ New at retail from a BSH authorized dealer or directly from BSH (not a display, “as is”, or previously returned model), and not for resale, or commercial use.
¡ Within the United States or Canada, and has at all times remained within the country of original purchase.
The warranties stated herein apply to the original purchaser of the product warranted herein and to each succeeding owner of the product purchased for ordinary home use during the term of the warranty. Please make sure to register your Product; while not necessary to effectuate warranty coverage, it is the best way for Gaggenau to notify you in the unlikely event of a safety notice or product recall.
21.2How long the warranty lasts
Gaggenau warrants that the Product is free from defects in materials and workmanship for a period of seven hundred and thirty (730) days from the date of the original delivery. The foregoing timeline begins to run upon the date of original delivery, and shall not be stalled, tolled, extended, or suspended, for any reason whatsoever. This Product is also warranted to be free from cosmetic defects in material and workmanship (such as scratches of stainless steel, paint/porcelain blemishes, chips, dents, or other damage to the finish) of the Product, for a period of sixty (60) days from the date of delivery or closing date for new construction. This cosmetic warranty excludes slight color variations due to inherent differences in painted and porcelain parts, as well as differences caused by kitchen lighting, product location, or other similar factors. This cosmetic warranty specifically excludes any display, floor, “As Is”, or “B” stock appliances.
21.3Extended Warranty
BSH also provides these additional limited warranties: ¡ 5 year limited warranty on electronics: BSH will repair or
replace any BSH microprocessor or printed circuit board if it proves to be defective in materials or workmanship (excludes labor charges).

1 Depending on the appliance specifications 40

¡ 5 year limited warranty on dish racks: BSH will replace the upper or lower dish rack (excluding rack components), if the rack proves defective in materials or workmanship (excludes labor charges).
¡ Lifetime warranty against stainless steel rust through: BSH will repair or replace your dishwasher with the same model or a current model that is substantially equivalent or better in functionality, if the inner liner should rust through (excludes labor charges).
¡ BSH will repair or replace the stainless steel door if the door should rust through (excludes labor charges).
21.4Repair/replace as your exclusive remedy
During this warranty period, Gaggenau or one of its authorized service providers will repair your Product without charge to you (subject to certain limitations stated herein) if your Product proves to have been manufactured with a defect in materials or workmanship. If reasonable attempts to repair the Product have been made without success, then Gaggenau will replace your Product (upgraded models may be available to you, in Gaggenau’s sole discretion, for an additional charge). Nothing in this warranty requires damaged or defective parts to be replaced with parts of a different type or design than the original parts. All removed parts and components shall become the property of Gaggenau at its sole option. All replaced and/or repaired parts shall assume the identity of the original part for purposes of this warranty and this warranty shall not be extended with respect to such parts. Gaggenau’s sole liability and responsibility hereunder is to repair manufacturer-defective Product only, using a Gaggenau authorized service provider during normal business hours. For safety and property damage concerns, Gaggenau highly recommends that you do not attempt to repair the Product yourself, or use a nonauthorized service provider; Gaggenau will have no responsibility or liability for damage resulting from repairs or work performed by a non-authorized service provider. Authorized service providers are those persons or companies that have been specially trained on Gaggenau products, and who possess, in Gaggenau’s opinion, a superior reputation for customer service and technical ability (note that they are independent entities and are not agents, partners, affiliates or representatives of Gaggenau). Nevertheless, taking your product to be serviced by a repair shop that is not affiliated with or an authorized dealer of Gaggenau will not void this warranty. Also, using third-party parts will not void this warranty. Notwithstanding the foregoing, Gaggenau will not incur any liability, or have responsibility, for the Product if it is located in a remote area (more than 100 miles from an authorized service provider) or is reasonably inaccessible, hazardous, threatening, or treacherous locale, surroundings, or environment; in any such event, if you request, Gaggenau would still pay for labor and parts and ship the parts to the nearest authorized service provider, but you would still be fully liable and responsible for any travel time or other special charges by the service

STATEMENT OF LIMITED PRODUCT WARRANTY

company, assuming they agree to make the service call. Further, to the extent you have installed the Product in a difficult-to-access location or have otherwise installed temporary or permanent fixtures that create barriers to accessing or removing the Product, Gaggenau will not incur any liability for, or have responsibility, for work or costs associated with moving the Product or otherwise creating access to the Product in order to repair or replace it. All such costs shall be your sole responsibility.
21.5Out of warranty product
Gaggenau is under no obligation, at law or otherwise, to provide you with any concessions, including repairs, prorates, or Product replacement, once this warranty has expired.
21.6Warranty exclusions
The warranty coverage described herein excludes all defects or damage that are not the direct fault of Gaggenau, including without limitation, one or more of the following: ¡ Use of the Product in anything other than its normal,
customary and intended manner (including without limitation, any form of commercial use, use or storage of an indoor product outdoors, use of the Product in conjunction with air or water-going vessels). ¡ Any party’s willful misconduct, negligence, misuse, abuse, accidents, neglect, improper operation, failure to maintain, improper or negligent installation, tampering, failure to follow operating instructions, mishandling, unauthorized service (including selfperformed “fixing” or exploration of the appliance’s internal workings). ¡ Adjustment, alteration or modification of any kind. ¡ A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes, regulations, or laws, including failure to install the product in strict conformity with local fire and building codes and regulations. ¡ Ordinary wear and tear, spills of food, liquid, grease accumulations, or other substances that accumulate on, in, or around the Product. ¡ Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand, floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity, lightning, power surges, structural failures surrounding the appliance, and acts of God. ¡ Service calls to correct the installation of your Product, to instruct you how to use your Product, to replace house fuses or correct house wiring or plumbing. ¡ Removal and replacement of trim or decorative panels that interfere with servicing the Product. ¡ Damage or defects caused by labor or parts installed by any non-authorized service provider, unless approved by Gaggenau before service is performed.
In no event shall Gaggenau have any liability or responsibility whatsoever for damage to surrounding property, including cabinetry, floors, ceilings, and other
41

en-usSTATEMENT OF LIMITED PRODUCT WARRANTY
structures or objects around the Product. Also excluded from this warranty are Products, on which the serial numbers have been altered, defaced, or removed; service visits to teach you how to use the Product, or visits where there is nothing wrong with the Product; correction of installation problems (you are solely responsible for any structure and setting for the Product, including all electrical, plumbing or other connecting facilities, for proper foundation/flooring, and for any alterations including without limitation cabinetry, walls, floors, shelving, etc.); and resetting of breakers or fuses TO THE EXTENT ALLOWED BY LAW, THIS WARRANTY SETS OUT YOUR EXCLUSIVE REMEDIES WITH RESPECT TO PRODUCT, WHETHER THE CLAIM ARISES IN CONTRACT OR TORT (INCLUDING STRICT LIABILITY, OR NEGLIGENCE) OR OTHERWISE. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED. ANY WARRANTY IMPLIED BY LAW, WHETHER FOR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE, SHALL BE EFFECTIVE ONLY FOR THE PERIOD THAT THIS EXPRESS LIMITED WARRANTY IS EFFECTIVE. IN NO EVENT WILL THE MANUFACTURER BE LIABLE FOR CONSEQUENTIAL, SPECIAL, INCIDENTAL, INDIRECT, “BUSINESS LOSS”, AND/OR PUNITIVE DAMAGES, LOSSES, OR EXPENSES, INCLUDING WITHOUT LIMITATION TIME AWAY FROM WORK, HOTELS AND/OR RESTAURANT MEALS, REMODELLING EXPENSES IN EXCESS OF DIRECT DAMAGES WHICH ARE DEFINITIVELY CAUSED EXCLUSIVELY BY GAGGENAU, OR OTHERWISE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, AND SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. No attempt to alter, modify or amend this warranty shall be effective unless authorized in writing by an officer of BSH.
21.7Obtaining warranty service
To obtain warranty service for your product, you should contact Gaggenau Customer Support at 1-877-442-4436 to schedule a repair.
21.8Product information
For handy reference, copy the information below from the rating plate. Keep your invoice and/or delivery documents for warranty validation.
Model number (E-Nr.)
Production number (FD)
Date of delivery
42

BSH Home Appliances Corporation 1901 Main Street, Suite 600 Irvine, CA 92614 USA www.gaggenau.com 1-877-442-4436 © 2023 BSH Home Appliances Corporation

9001897900
9001897900en-us(030922)650 P5

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals