ASKO WM75.1 Washing Machine User Manual
- August 14, 2024
- ASKO
Table of Contents
WM75.1 Washing Machine
“`html
Specifications:
- Model: WM75.1 EN
- Brand: ASKO
- Design: Scandinavian design with pure lines and high
quality
Product Usage Instructions:
Safety Precautions:
It is important to read and save the instruction manual for
future reference. Follow the safety precautions outlined in the
manual to ensure safe usage of the washing machine.
Washing Machine Description:
The washing machine features a main switch, program selector
knob, display unit, program settings buttons, start/pause button,
detergent compartment, QR and AUID code, rating plate, washing
machine door, drain filter cover, water release hose, and drain
filter pump. Familiarize yourself with the components before
use.
Detergent Compartment:
The detergent compartment includes sections for prewash, main
wash liquid detergent, main wash powder detergent,
softener/conditioner, liquid detergent for Color program, and
liquid detergent for Black/White/Sensitive/Other program. Use the
designated compartments based on your detergent type.
Before Using the Appliance for the First Time:
1. Packaging: Remove all packaging materials
and dispose of them according to local recommendations.
2. Transport Protection:
-
Release and remove the three transport bolts as shown in the
manual. -
To remove the plastic plugs, squeeze and pull them out.
-
Remove the caps from the plastic plugs and store them for
future use.
If you need to transport the washing machine in the future,
reinstall the bolts and plastic caps to secure the machine and
prevent damage during transport.
FAQ:
Q: How do I clean and maintain the washing machine?
A: Refer to the cleaning and maintenance section in the manual
for detailed instructions on how to clean and maintain your washing
machine.
Q: Where can I find technical information about the washing
machine?
A: Technical information is available in the manual under the
Technical Information section.
“`
USER MANUAL Washing machine WM75.1 EN
Carefully read the instructions for use before using the washing machine.
W4096R/1/2/3
Dear Customer,
We thank you for purchasing this quality ASKO product.
We hope it meets all your expectations. Scandinavian design combines pure
lines, everyday functionality, and high quality. These are the key
characteristics of all our products, and the reason why they are highly
appreciated across the globe.
We kindly recommend you to read these instructions before using the appliance
for the first time. The instruction manual also includes information on how
you can help protect the environment.
TABLE OF CONTENTS
Safety precautions
3 Cleaning and maintenance
39
Washing machine description
6 Errors what to do?
44
Detergent compartment
6 Service
49
Before using the appliance for the first time 7 Technical information
50
Installation and connection
10 Program table
53
Tips before washing
17 Table: washing mode/temperature
56
Washing process, step by step (1 8)
19 Table options
57
System settings
31 Disposal
58
Special features
35 Quick guide
59
The following symbols are used throughout the manual and they have the following meanings:
Information, advice, tip, or recommendation
Warning danger of hot surface
Warning general danger
Warning danger of fire
Warning danger of electric shock
Original instructions 2
See Quick guide on the last page.
SAFETY PRECAUTIONS
GENERAL
Please read the instruction manual and save it for future reference.
· Please do not use the washing machine if you have not read and understood
these instructions or use first.
· Failure to observe the instructions for use or inappropriate use of the
washing machine may result in damage to the laundry or machine, or injury to
the user. Keep the instruction manual handy, near the washing machine.
· Instructions for use are available on our website at www.asko.com. · Your
washing machine is intended solely for household use. · The appliance has to
be connected to the water and power supply by a
trained expert. · Any repair and maintenance pertaining to safety or
performance should be
done by trained experts. · To avoid hazard, damaged power cord may only be
replaced by the
manufacturer, authorized service technician, or other authorized person. ·
After installation, the washing machine should stand still for two hours
before
it is connected to the power mains. · The washing machine may not be connected
to the power mains using an
extension cord. · Do not connect the washing machine to an electrical outlet
intended for an
electric shaver or hair dryer. · To connect the washing machine to water
supply, make sure to use the
supplied water supply hose and gaskets. Water pressure has to be between 0.1
and 1 MPa (approximately 110 kp/cm2, 1-10 bar, 10100 N/cm2). · Always use a
new water supply hose to connect the appliance to water supply; do not reuse
an old water supply hose. · After the washing cycle, close the water tap and
pull out the washing machine plug from the power socket. · Only use the
washing machine for washing laundry, as described in the instruction manual.
The machine is not intended for dry cleaning. · In case of incorrect appliance
connection, incorrect use, or servicing by an unauthorized person, the user
shall bear the cost of any damage. · Only use detergents intended for the
washing machine! · Only use agents for machine washing and care of laundry. We
shall not be responsible for any damages or discolouration of gaskets and
plastic parts resulting from incorrect use of bleaching or colouring agents.
3
· Bleaches that contain chlorine can be replaced with oxygen-based bleaches.
Otherwise, a neutralization cycle should be performed by running the Cotton
program at the highest temperature. For best results, use hydrogen peroxide or
oxygen-based detergents.
· Do not use colourants (dyes) or bleaching substances (substances for
discolouration or removal of colourants) as they contain sulphuric compounds
that could cause corrosion.
· Excessive use of products containing chlorine compounds increases the risk
of premature failure of appliance components. This depends on the
concentration of chlorine, exposure time, and temperature.
· Do not use detergents that contain solvents as this could lead to release of
poisonous gases, damage to the machine, and risk of fire and explosion.
· Before using the appliance for the first time, remove the transport bolts
and all other transport protection devices. See chapter “BEFORE FIRST USE /
Transport protection”.
· The machine is not intended for use by persons (including children) with
physical or mental impairments, or persons with lacking experience and
knowledge. These persons should be instructed about the use of the appliance
by a person responsible for their safety.
· Emergency door opening tool is located on the back side of the dispenser. ·
Maximum washing capacity in kg is indicated on the rating plate (or in the
PROGRAM TABLE).
CHILD SAFETY · Do not allow small children to play with the washing machine. ·
Before closing the washing machine door and running the program, make
sure there is nothing except laundry in the drum (e.g. if a child climbed into
the washing machine drum and closed the door from the inside). · Keep the
detergent and conditioner out of reach of children. · Activate the child lock.
See chapter “SYSTEM SETTINGS, section Child Lock”. · Do not let children
younger than three years to come near the appliance, unless they are under
constant supervision. · The washing machine is made in compliance with all
relevant safety standards. This washing machine may be used by children aged 8
years and above and by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge, but only if they are
supervised during the use of the appliance, if they have been provided
relevant instructions regarding safe use of the washing machine, and if they
understand the
4
hazards of inappropriate use. Make sure children do not play with the
appliance. Make sure the children do not clean the washing machine or perform
any maintenance tasks without supervision. DANGER OF HOT SURFACE · At higher
washing temperatures, the door glass will heat up. Be careful to avoid burns.
Make sure children do not play near the door glass.
WATER OVERFLOW PROTECTION · If the water level in the appliance rises above
the normal level, then the
excessive water level protection will be activated. It will shut off the water
supply and start pumping out the water. If the water level does not decrease
in 60 seconds, the program will be interrupted (see chapter “ERRORS WHAT TO
DO?”).
TRANSPORTING / STORAGE DURING THE WINTER If you transport or store the
appliance in vehicles or rooms that are not heated and where the temperature
could drop to below freezing point, please do the following: · Clean the drain
pump filter. See chapter “CLEANING AND MAINTENANCE”. · Close the water supply
to the washing machine, undo the water supply hose
from the water supply tap, and wait until the water flows out of the tap and
the hose. · After the drain pump filter is emptied, there can still be a small
amount of water in the machine. This, however, does not affect the quality and
will not damage the appliance. · If the washing machine is to be transported,
transport protection has to be re-installed before transport (See chapter
“BEFORE USING THE APPLIANCE FOR THE FIRST TIME”).
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE! 5
WASHING MACHINE DESCRIPTION
87 6
12 3 4 5
1. Main switch (ON/OFF) 2. Program selector knob 3. Display unit 4. Program
settings buttons 5. Button (start/pause) 6. Detergent compartment 7. QR and
AUID code (on the inside of the washing
machine door) 8. Rating plate with information about the washing
machine (on the inside of the washing machine door) 9. Washing machine door
10. Drain filter cover 11. Water release hose 12. Drain filter pump (installed
behind the drain pump filter)
9 10 11 12
DETERGENT COMPARTMENT
7
1
3
4
6 5
2
1. Prewash compartment
2. Compartment for main wash liquid detergent. Use the foldable barrier (3).
2. Compartment for main wash powder detergent. Do not use the foldable
barrier (3).
4. Softener / conditioner compartment
5. Compartment (A) for liquid detergent for the Color program for the ADS.
(ADS = Auto Dose System);
6. Compartment (B) for liquid detergent for the Black / White / Sensitive /
Other program for ADS
7. Tab for detergent compartment removal
6
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
PACKAGING Remove all packaging. Please sort the materials in compliance with
local recommendations (see chapter “DISPOSAL”).
TRANSPORT PROTECTION Before using the appliance, remove the three transport
bolts and plastic plugs which protect the appliance during transport.
1 Release and remove the bolts as shown in the figures.
2 To remove the plastic plugs holding the bolts, squeeze them and then pull them out.
1
2
3
3 Remove the caps from the plastic plugs. Push the caps over the three holes in which the plastic plugs were inserted. Save the bolts and plastic plugs if you have to transport your washing machine in the future.
If you wish to transport the washing machine, reinstall the bolts and plastic caps to lock the machine. This will prevent any damage to the machine due to vibrations during transport. If you have lost the transport bolts or plastic caps, replacements can be ordered at your dealer.
Art. No.
ID:
270698
Bolt
551188
Plastic cap (transport lock)
Please order three pieces of each item!
7
CLEANING Disconnect the washing machine from the power mains and open the door. Clean the washing machine drum with a damp cloth and a mild detergent.
Connect the washing machine to the power mains and run the dedicated drum
cleaning program. See chapter “WASHING PROCESS; STEP BY STEP (18)” /STEP 5:
CHOOSE THE PROGRAM.
No program can be started while the door is open.
SETTINGS BEFORE FIRST USE After connecting the washing machine and power it
for the first time, you will be asked to do following settings: 1. Language
selection
Press the button 2 or the program selector knob to scroll the list of
languages. Confirm your selection by pressing the OK button. 2. Water hardness
The following water hardness settings are available: soft / normal / hard.
How to use the test strip: 1. Turn on the water tap and let the water run for a minute or so. 2. Fill a glass with cold water. 3. Remove the test strip from its packaging. 4. Dip the test strip in the water for about one second. 5. Wait one minute. Now compare the colours of the squares with the water hardness table.
Test strip
°dH
°fH
4 green
< 3
< 5
1 red
4
7
2 red
7
12
3 red
14
25
4 red
21
37
Table for water hardness; See chapter “SYSTEM SETTINGS/WATER HARDNESS”. Press
the “Finalize” button to confirm your selection. For further washing process,
see chapter “WASHING PROCESS; STEP BY STEP (18)”.
The amount of detergent also depends on the hardness of water. For details,
see the detergent packaging. Please contact your local water supply company to
check the water hardness in your area.
8
In models with ADS the amount of detergent dispensed also depends on the water
hardness setting. Before using the AD system for the first time, run one of
the programs (without any laundry), after filling the A or B tank with liquid
detergent (see chapter “SPECIAL FEATURES”). Before the product is dispatched
from the factory, every appliance is tested. As a result, there may be some
residual water left in the discharge pump filter. This, however, does not
affect the quality and will not damage the appliance.
9
INSTALLATION AND CONNECTION
POSITIONING THE WASHING MACHINE The washing machine can be installed as a
builtin (integrated) or a free-standing unit. Place the machine on a level
surface so that the power outlet on the wall is accessible.
Before connecting the washing machine to the power mains, wait for at least 2
hours until it reaches room temperature.
If the appliance is installed on a plinth or a similar structure, then the
appliance must be fixed to it, to avoid the risk of falling. ASKO original
accessories are available for this purpose, complete with fixing instructions.
Free-standing appliance If you have a dryer of suitable dimensions (by another dryer manufacturer), use the vacuum feet to stack it on top of the washing machine, or place it next to it.
Clearances around the washing machine
min. 50 mm
Built-in washing machine The washing machine can be integrated under a worktop with a height of 900950 mm. Leave 5 cm of room around the entire of the appliance, including between the back edge of the upper cover and the wall behind it.
min. 50 mm
min. 50 mm
Opening the washing machine door (top view)
942 mm
376 mm
110°
10
Stacking an ASKO dryer on top of an ASKO washing machine To stack an ASKO
dryer on top of a washing machine, use the extra vacuum feet and the tipping
guard (A+B), supplied in the cardboard box in the ASKO dryer drum. If the
washing machine and dryer are not of matching dimensions or if you have
installed a hidden helper between the two appliances, then binding plates are
available as optional accessories at the service unit.
AB
Ventilation Requirements of ASKO laundry concept or closet installation ASKO’s
front panel controls make it possible to install the washers and dryers in a
cabinet or closet.
Make sure there is clearance between appliances and cabinet or wall and 25 mm
minimum clearance between the rear edge of the appliance top panel and the
cabinet or wall. When closet or cabinet is closed by the door, we recommend
louvered doors, to ensure proper ventilation.
Otherwise there must be ventilation openings on the door. See illustration of
dimension for ventilation openings below:
65 mm
1550 mm 50 mm
635 mm
65 mm
35 mm
25 mm
12 mm 465 mm
12 mm
Ensure the dryer door can be opened without hindrance after installation.
The cool air intake panel at the front of the dryer must not be blocked or
covered. Doing so could cause a fault.
Disregarding of instructions influences on appliance performance and may also
result in failure of the appliance.
11
ADJUSTING THE FEET Place the washing machine so that it is stable. 1. Level
the washing machine in longitudinal and
traverse direction by rotating the adjustable feet (using a No. 32 spanner).
The feet allow levelling by +/- 1 cm. 2. When the appropriate height of feet
is set, use the wrench No. 17 to firmly fasten the counter-nuts towards the
bottom of the appliance . 3. Tighten the jam nuts (counter nuts) to the end
position. This will reduce washing machine noise, vibration, movement etc. to
minimum.
1
MOVING THE WASHING MACHINE AND TRANSPORT AFTER INSTALLATION If you are moving
the washing machine without packaging, open the washing machine door and pull
the appliance by holding the washing assembly, as indicated in the figure.
For any further moving of the appliance, use the transport rods (the washing
machine drum has to be blocked). (See chapter TRANSPORT PROTECTION.)
2
3
12
CONNECTING TO WATER SUPPLY
The machine has to be connected to water supply by an adequately trained
person.
Use the water supply hose to connect the appliance. Water pressure has to be
between 0.1 and 1 MPa (approximately 110 kp/cm2 , 1-10 bar, 10100 N/ cm2).
If the hoses are newly installed, we recommend rinsing them to remove any
impurities. Otherwise, these impurities could clog the filter in the water
connection on the washing machine and thus cut off the water supply.
CONNECTING TO HOT/COLD WATER SUPPLY (Only available in some models) If your
appliance has connections for both hot and cold water, then connect one hose
to the cold water connection and the other hose to the hot water connection,
as indicated on the back of the appliance: COLD = cold and HOT = hot. Hot
water is supplied for programs operating at 40 °C or more.
Hot water connection The hot water temperature must not exceed 70 °C (60 °C in
the UK (United Kingdom)).
Connecting to both hot and cold water will save time and electric energy when
washing.
If your washing machine model has connections for both hot and cold water, and
you only wish to connect cold water, then the protective cap has to be (or
remain) attached to the hot water connection.
The water intake hose has to be fastened firmly enough for the hose to have a
good seal. After connecting the hose, the seal must be checked for any leaks.
Only use the water supply hose supplied with the appliance. Do not use any
used or other hoses.
If the connection on the supply hose is of different dimensions than the water
tap (e.g. 3/4″ 1/2″), use an adapter.
13
INSTALLING THE DRAIN HOSE
Upon delivery, the appliance has a drain hose attached. This drain hose must
be connected to a drain. Drain hose can also be attached to a wall drain with
a trap; such trap should be properly installed to allow cleaning. The height
of the drain should be 600900 mm above the floor. The lower position (600 mm)
is always recommended. Make sure the drain hose is not clipped or bent.
A C
B
CONNECTING TO THE POWER MAINS
After installation, the washing machine should stand still for two hours
before it is connected to the power mains.
Connect the appliance to an earthed power outlet. After installation, the wall
outlet should be freely accessible. The outlet should be fitted with an earth
contact (in compliance with the relevant regulations).
Connection upon delivery
TYPE: WMXX.XXXXX MODEL: XXXXXX.X
Art.No.: XXXXXX/XX Ser.No.: XXXXXXXX
XXX-XXX V ~ XXXX W
X kg XXA
IPX4 XX Hz XX-X MPa
Information about your washing machine is indicated on the rating (type)
plate. Use the type A differential current protection switch.
We recommend using over-voltage protection to protect the appliance in case of a lightning strike.
The washing machine may not be connected to the power mains using an extension cord.
Do not connect the washing machine to an electrical outlet intended for an electric shaver or hair dryer.
Any repair and maintenance pertaining to safety or performance should be done by trained experts.
600 – 900 mm 600 – 900 mm 600 – 900 mm
Drain hose can also be connected directly to the washbasin drain via a siphon. In this case, the hose, should be 600900 mm above the floor. Internal hose diameter should be at least 18 mm. See figure.
At least 18 mm
14
ASKO LAUNDRY CARE – HIDDEN HELPERS*
Laundry care ironing board The ironing board is a clever solution. It is
always handy when you need to iron your clothes, and it can be easily, safely
and invisibly stored away when not in use. It can be installed between your
washer and dryer, or on top of one of them.
Laundry care double A wire basket and pull-out shelf. It can be used as an
additional surface for folding clothes, sorting socks and for storage. The
basket is useful for removing and carrying laundry to the wardrobe or
workbench for ironing and folding. It can be installed between your washer and
dryer, or on top of one of them.
Laundry care single Pull-out shelf. It can be used as an additional surface
when folding clothes and sorting socks or for storage. It also makes loading
and unloading your laundry much easier. It can be installed between your
washer and dryer.
Laundry care basket A large pull-out basket that is easily accessible via a
push-pull door opening. Useful for removing laundry and carrying it to the
wardrobe or workbench for ironing and folding. It can be installed between
your washer and dryer, or on top of one of them.
Pedestal drawer with shelf A useful storage drawer with a height of 30 cm.
Ideal for storing your detergent, softener, coat hangers, pegs, user manuals
and other useful items in the laundry area. The drawer also comes with a shelf
for easy loading and unloading of your laundry.
15
Laundry care plinth Thanks to the stainless steel plinth, your appliance will be raised by 30 cm, which makes loading and unloading of laundry easier.
*AVAILABILITY DEPENDING ON MARKET
DENOMINATION
ART. No.
IRONING BOARD HI1153 White
576552
IRONING BOARD HI1153 Stainless steel
732756
IRONING BOARD HI1153 Titanium
576553
LAUNDRY CARE DOUBLE HDB1153 White
576554
LAUNDRY CARE DOUBLE HDB1153 Stainless steel
732757
LAUNDRY CARE DOUBLE HDB1153 Titanium
576555
LAUNDRY CARE SINGLE HSS1053 White
576730
LAUNDRY CARE SINGLE HSS1053 Titanium
576732
LAUNDRY CARE HB1153 White
576733
PEDESTAL DRAWER W. SHELF HPS5323 White (only 8 kg or 9 kg models)
576735
PEDESTAL DRAWER W. SHELF HPS5323 Stainless steel (only 8 kg or 9 kg models) 576737
STAINLESS STEEL PLINTH HPL530S for 8 kg and 9 kg models
441663
STAINLESS STEEL PLINTH HPL830S for 11 kg and 12 kg models
445501
16
TIPS BEFORE WASHING
This chapter includes several tips on how to prepare the laundry for washing.
LAUNDRY SORTING Sort the laundry according to: · how soiled it is, · colour, ·
material.
CLOTHING 1. Close the zips and hook-and-loop fasteners so
that they do not damage the fabric. 2. New dyed items may contain excess dye;
therefore, they have to be washed separately several times. 3. Turn delicate
items inside out. This will decrease the risk of tear and colour fading. 4.
Place very sensitive clothes and small items in a special-purpose laundry
washing bag. 5. Empty the pockets and turn them inside out.
LAUNDRY SYMBOLS Observe the laundry symbols.
Textile maintenance symbols:
Washing
Normal
Delicate
Max. washing temperature 90 °C
Max. washing temperature 60 °C
Max. washing temperature 40 °C
Max. washing temperature 30 °C
Hand wash only
Do not wash
Bleaching c1 Bleaching in cool water
Bleaching not allowed
Dry cleaning
A Dry cleaning with all agents
P Perchloroethylene R11, R113, petroleum F Dry cleaning in kerosene, pure
alcohol,
and R113 Dry cleaning not allowed
Ironing
Ironing with a hot iron with a maximum temperature of 200 °C Ironing with a
hot iron with a maximum temperature of 150°C Ironing with a warm iron with a
maximum temperature of 110°C
Ironing not allowed
Natural drying Drying on a flat surface Drying without prior spinning Drying
on a clothes line or a hanger
Tumble drying
Drying at high temperatures Drying at low temperatures Tumble drying not
allowed
17
DYED COTTON Laundry made of dyed cotton which is to be washed at 60 °C should
be first washed at a temperature of 60 °C to remove the excess dye. If this is
not done, there is danger of dye being washed out of such items. To maintain
the colour of the fabric, use bleach-free detergent.
UNBLEACHED LINEN Unbleached lining fabric should be washed at 60 °C with a
detergent free of bleach or optical bleaching agents. Heavily soiled linen
laundry may be occasionally washed at higher temperatures, but do not do this
too often as heat could ruin the sheen and strength of linen clothing.
WOOL These fabrics are intended for either machine or hand wash. The Wool/Hand
Wash program is equally gentle or even gentler than an actual hand wash. Wool
in particular is sensitive to washing and similar procedures. If you do not
wish to spin your clothes, select a setting without spinning (see “STEP 6:
Choose the program settings /button 3”). However, most garments are suitable
for at least a short spinning cycle. Top spinning speed available is 800 rpm.
VISCOSE AND SYNTHETIC FIBRES Materials made of viscose and some synthetic
fibres are highly sensitive, and require a lot of space in order not to
crease. When washing, only fill the drum to a half and choose a program with
spinning speed of no more than 1200 rpm.
Viscose and acetates are fragile when wet.
REDUCING ALLERGIC REACTIONS (Only in some models) The options include washing
with the Allergy Program Cotton and Allergy Program Synthetics, using the
Allergy Mode program setting, or using an extra rinse (Super Rinse). These
programs, program settings, and functions can be used for people with
sensitive skin, such as those suffering from allergies, or small children.
SAVING TIME AND ENERGY To save time and energy, use the Universal wash. This
program has shorter main wash cycle than Cotton and often suffices for less
soiled laundry.
ECONOMY AND EFFICIENCY You can save a lot of energy by not using the programs
operating at higher temperatures. Choose the Quick program if you wish to only
refresh the laundry; or use the Time program. This will save water and power.
Selecting the maximum spinning speed will reduce power consumption if you dry
the clothes in a dryer or a drying cabinet. When using the programs Heavy,
Universal wash and Cotton, we recommend washing a full load. Avoid prewash.
Modern washing machines and detergents are efficient without the prewash as
well. Prewash is only necessary for heavily soiled laundry. Use the additional
function Prewash (see “STEP 6: Program Settings Menu choosing extra
functions / button 5”).
DETERGENTS Detergents carrying the environment protection label are less
harmful to the environment. Only add the detergents in compliance with the
recommendations by detergent manufacturers. Recommended amount of washing
detergent at certain loads and water hardness levels are specified on the
detergent packaging.
STAINS If your clothes are soiled with stubborn stains (blood, eggs, coffee,
grass etc.), they should be appropriately treated before the wash. Then, wash
your laundry using the special programs (if your washing machine has them). Do
not use any chemical substances or agents; only use the stain removing
detergents.
DYEING FABRICS If you wish to dye fabrics in the washing machine, choose the
Universal wash program with the Super Rinse extra function. Choose the
temperature according to the dye manufacturer’s recommendations. If you dye
mixed fabrics, such as polyester/cotton, choose a low spinning speed.
Add the dye directly into the drum, rather than in the detergent compartment.
After dyeing use the Drum Cleaning program (self-cleaning program). Use the
standard amount of detergent.
When using bleaches or stain removal agents, there is danger of corrosion and
discolouration.
To protect the environment, we advise against using powerful chemicals.
18
WASHING PROCESS, STEP BY STEP (1 8)
STEP 1: SORT THE LAUNDRY
See chapter “TIPS BEFORE WASHING” Use a washing net for underwire bras. Empty
the pockets. Coins, nails etc. could damage the machine
and the fabric.
STEP 2: TURN ON THE MAIN SWITCH.
Turning on Press the on/off button.
Turning off Press the on/off button.
If the machine does not accept the on/off command correctly, wait for at least
8 seconds before pressing any other button.
STEP 3: OPEN THE WASHING MACHINE DOOR AND INSERT THE LAUNDRY.
Open the washing machine door by pulling the handle towards you.
1
2
3
Place the laundry into the washing machine drum. Before doing so, make sure
the drum is empty. Do not overload the drum! If the washing machine drum is
too full, the laundry will not be washed as thoroughly.
19
STEP 4: ADD THE DETERGENT AND THE CONDITIONER.
Recommended amount of detergent is usually specified on the detergent packaging. When washing a smaller amount of laundry, the amount of detergent used can be decreased. Observe manufacturers’ recommendations regarding the type of detergent suitable for certain temperatures, load size, and water hardness. When using the ADS (Auto Dose System), the appliance will automatically add the liquid detergent depending on the amount of laundry and the other selected settings.
Powder detergent Add powder detergent into the main wash detergent compartment. If you have selected the Prewash function or Heavy program or the Time program with 2:30 or longer duration, then add powder detergent to the prewash detergent compartment.
We recommend adding the powder detergent immediately before the washing cycle. Otherwise, make sure the detergent compartment is completely dry before adding the powder detergent, as otherwise, the powder detergent may cake before the start of the washing process.
Liquid detergent When using a liquid detergent, observe the detergent manufacturer’s recommendations. When using thick detergents, we recommend always using the laundry balls. Use the barrier (3) in the detergent compartment; see figure in the chapter “DETERGENT COMPARTMENT”. Add the liquid detergent in the front part of the detergent compartment (2).
Liquid detergent in ADS The washing machine will automatically add the amount of liquid detergent according to the amount of your laundry and depending on how heavily soiled it is. Before adding the liquid detergent, pull out the dosing container as far as it will go. Compartment (A) for liquid detergent for the Colour program. Compartment (B) for liquid detergent for the Black / White / Sensitive / Other program. See chapter “SPECIAL FEATURES”. In case of excessive foaming, check the water hardness settings (see chapter “SYSTEM SETTINGS”), how heavily soiled the laundry is, and the setting for the amount of liquid detergent according to the manufacturer’s recommendations (see chapters “TIPS BEFORE WASHING”). ADS operation has been tested with liquid detergents by the leading global manufactures. Use of other non-homogenized or homemade liquid detergents can cause malfunction of the ADS. Any servicing required due to such problems shall not be covered by the warranty.
The washing machine must be switched on before you add the detergent!
Laundry ball or washing bag If you are using a laundry ball or a washing bag, place it directly into the drum and choose a program without any prewash.
An excessive amount of detergent will not improve washing results. Rather, it will lead to foaming and increase the environmental impact. We recommend using less detergent. Only increase the dosage if you are not satisfied with the washing results.
Conditioner Pour the conditioner into the detergent compartment, into the compartment with the symbol recommendation on the conditioner packaging.
. Observe the
Do not fill the conditioner compartment over the max. indication (maximum indicated level). Otherwise, the conditioner will be added to the washing machine drum too soon, leading to poorer washing effect.
20
STEP 5: CHOOSE THE PROGRAM.
Choose the program by rotating the Program selector knob in either direction.
The Program selector knob can be used when arrows appear on the display.
Choose the program depending on the type of laundry and how heavily soiled it
is (see chapter “TIPS BEFORE WASHING”).
Estimated program duration will appear on the display.
Extra program settings can also be selected for each program. See STEP 6.
Choose between the following programs:
Program
Description
UNIVERSAL WASH
Program for lightly to moderately dirty laundry. The temperature can be set separately; therefore, observe the instructions indicated on the clothing. Wash the clothes worn directly on the skin at 60 °C. Less heavily soiled laundry will be thoroughly cleaned at 40 °C. Spinning speed can also be freely selected. Program duration and amount of water will be adjusted to the amount of laundry.
COTTON
Program for normally or heavily soiled laundry, white or coloured. The temperature can be set separately; therefore, observe the instructions indicated on the clothing worn directly on the skin. Choose 40 °C if the laundry is only lightly dirty. Spinning speed can be set to your preference. Default setting is maximum spinning speed. Program duration and amount of water will be adjusted to the amount of laundry.
ECO 40-60*
Washing cycle, which is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C.
MIX/SYNTHETICS
Program for delicate clothing made of synthetic and mixed fibres or viscose, and for simple care of cotton. The highest available temperature is 60 °C. Observe the instructions indicated on the clothing. Most synthetic fabrics will be washed at 40 °C. Clothing worn directly on the skin should be washed at 60 °C. Maximum spinning speed is 1200 rpm; it can be decreased if necessary.
WOOL/HAND WASH
Gentle program for washing wool, silk, and clothes that require manual washing. Maximum temperature is 40 °C. This program has a short spinning cycle. Top spinning speed available is 800 rpm.
DARK WASH
This program is used for washing dark laundry using special-purpose detergents
for black laundry. We recommend turning dark garments inside out. The program
washes at low temperatures, with gentle tumbling and 1200 rpm.
TIME PROGRAM
Use this program when you wish to wash the laundry for a specific amount of time. Duration can be set from 20 minutes to 3 hours (in 15-minute steps). In this program, select the corresponding washing time and temperature according to the type of laundry being washed.
AUTO
This program automatically adjusts the duration of the main wash and number of rinses depending on the amount of laundry in the machine.
21
Program QUICK HEAVY
EASY CARE
JEANS SHIRTS STEAM REFRESH QUICK PRO HYGIENE
BEDDING ALLERGY PROGRAM COTTON
ALLERGY PROGRAM SYNTHETICS
Description
Quick program for lightly soiled laundry.The program operates at certain
temperatures; therefore, observe the instructions indicated on the clothing. A
lower temperature setting will result in shorter duration of the wash.
Spinning speed can be set to your preference.
Program for heavily soiled laundry. The temperature can be set separately;
therefore, observe the instructions indicated on the clothing. Maximum
available temperature is 90 °C. It is suitable for very heavily soiled
laundry. Spinning speed can be set to your preference. Program duration and
amount of water will be adjusted to the amount of laundry.
Program for delicate clothing made of synthetic and mixed fibres, and for
simple care of cotton. It may also be used for pillows, quilted jackets and
similar items, as it uses a lot of water for the wash. Carefully read the
washing instructions. If the outer layer has a membrane, do not use a
conditioner. Washing temperature can be set up to 60 °C, and spinning speed
can be set up to 1200 rpm.
Program for washing jeans. It uses low temperature and 1200 rpm. Due to a
higher water level and an extra rinse, there will be no traces of detergent on
the jeans.
This program washes the collars and cuffs without wrinkling them. The wash
takes place at a low temperature, with a greater amount of water and gentle
tumbling. Steam is added at the end of this program in order to reduce
occurrence of wrinkles. This feature is disabled in Speed Mode.
Use this program to refresh the laundry with steam (for laundry that does not
yet need washing, only refreshing).
A quick program with high efficiency for smaller amounts of lightly soiled
laundry. The program washes with intensive tumbling and 1200 rpm. (4 kg, 40
°C/ 50 °C/ 60 °C)
This program is used to wash clothes that require special care, such as baby
clothes , undreware or clothes for people suffering from skin allergies. We
recommend turning the garments inside out as this will also thoroughly wash
out the skin residues or residues of skin treatment products. The program is a
combination of an extra long and high heating and extra rinsing with strong
and sharp movements that removes any detergent residue.
This program is used to wash bedding, pillows, and larger items. Weekly wash
of your bedding will remove skin residue and mites that cause allergies.
Observe the instructions for washing and maintenance. The wash uses a large
amount of water and extra rinse cycles.
This program is used to wash normal to heavily soiled clothes that require
special care, such as clothes for people with highly sensitive skin or skin
allergies. We recommend turning the garments inside out as this will also
thoroughly wash out the skin and other residues. You can also select the
option to wash at maximum temperature and maximum spinning speed. Set
temperature will be maintained for a longer time period than on conventional
programs in combination with intense agitation and extra rinses.
This program is used to wash clothes that require special care, such as
clothes for people with highly sensitive skin or skin allergies. The program
is also suitable for people sensitive to washing detergents. We recommend
turning the garments inside out as this will also thoroughly wash out the skin
and other residues. Set temperature will be maintained for a longer time
period than on conventional programs in combination with intense agitation and
extra rinses.
22
Program RINSE SPIN DRAIN DRUM CLEANING
SYSTEM SETTINGS
Description
This program includes 2 cold rinses and a short spinning cycle. The program is
suitable for laundry that only needs rinsing, and for cleaning cloths or mops.
Use the program when you only wish to spin the laundry.
If you only wish to pump out the water from the washing machine, choose the
Drain program.
This program is used to clean the drum and to remove detergent residues and
bacteria. The drum has to be empty. You can add some distilled (spirit)
vinegar (approx. 2 dl) or sodium bicarbonate (1 tablespoon, or 15 g). We
recommend that you run the programme at least once a month or when the text
“Sterile Tube alert” appears in the display. Text “Sterile Tube alert” is
displayed every 40 completed wash cycles.
Use the program selector knob to choose System Settings and confirm with ENTER
(button “2”). Use the Program selector knob to scroll through the settings.
The following options are available: Child Lock, Auto Dose System (ADS),
Language (language selection), Water (water hardness), Temperature
(temperature unit), Programs (set of programs), Display (display unit:
contrast & logo), Sounds (acoustic signals), Reset.
See chapter “SYSTEM SETTINGS”.
- “eco 40-60” means the name of the programme declared by the manufacturer, importer or authorised representative as able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same washing cycle, and to which the ecodesign requirements on energy efficiency, washing efficiency, rinsing effectiveness, programme duration and water consumption relate.
23
STEP 6: CHOOSING THE PROGRAM SETTINGS
Using the program settings, the washing programs can be further adjusted to
your wishes. Some program settings may not be available for your selected
program. Selected program settings will remain stored after the end of the
washing cycle and may be changed subsequently (except for Start delay and
Anti-crease, which are not stored after the wash is complete).
Programs with selected temperatures above 60 °C due to safety of your laundry
will not be stored after the end of the washing cycle.
1. Washing mode 2. Temperature 3. Spin speed
1
2
34
5
6
4. Additional program option (choosing extra functions)
5. Start delay 6. Dose Modes
Choose the program settings before pressing the START button. Program settings
cannot be changed during the progress of a program.
Press and hold the button under the program setting to display the information
(INFO) about each program setting.
Following are the program settings that may be selected using the buttons 1 to
6:
1. Washing mode By pressing the button 1, you can choose between washing
modes: · Normal mode / Off mode
(Basic setting) · Green mode
(Wash that saves energy; longer washing time, lower water consumption). ·
Speed Mode
(Time-saving wash; shorter washing times, higher water and energy consumption)
In the Cotton program, we recommend a half-load. · Allergy Mode (Wash with
extra water, extra rinsing, extended washing time, higher water and energy
consumption). · Intense Mode (Wash that improves cleaning performance, with
extra water and extended washing time).
2. Temperature By consecutively pressing the button 2, you can set the
temperature for the selected program, choosing from the following available
values: Cold wash and 20/30/40/50/60/70/80/90 °C. The actual available
temperature options will depend on the selected program.
24
3. Spin speed By consecutively pressing the button 3, you can set the spin speed, choosing from the following available values: NO d (no drain) /… / max. (rpm) (max rpm = depends on the model) Default setting is 1400 rpm; it depends on the selected program (spin rate can be changed reduced or increased (only in some models)). The actual available spin speed will depend on the selected washing program.
With the NO d (no drain) option, the program will not include a spin cycle, and the water from the last rinse will remain in the washing machine. The laundry will stay in the water from the last rinse, which will prevent creasing. If you have selected the No d (No Drain) option, you have to select the Drain or Spinning program after the end of the washing program to pump the water out from the machine before you open the washing machine door.
4. Choosing extra functions (Additional program option/more options) Press the button 4 to confirm the extra functions. Then, use the Program selector knob to scroll the list of functions or options. Confirm the function you wish to select by pressing the button 1. The following extra functions are available:
-
Super Rinse (extra rinses) To increase the number of rinse cycles (+2), select the Super Rinse setting. This is recommended for persons with highly sensitive skin and/or in areas with very soft water. Confirm the selection by pressing the button 1 (On / Off ). To return to the Main menu, press the button 6.
-
Prewash To use a prewash before the main wash, choose the Prewash option. Use of this function is recommended for heavily soiled laundry or for laundry with stubborn surface stains. Confirm the selection by pressing the button 1 (On / Off ). To return to the Main menu, press the button 6. Add the prewash detergent into the prewash compartment and the main wash detergent into the main wash compartment of the detergent compartment (see chapter “DETERGENT COMPARTMENT”).
-
High water level For a larger amount of water after the wash and spinning cycle, select the High Water Level option. Confirm the selection by pressing the button 1 (On / Off ). To return to the Main menu, press the button 6.
-
Anti-crease To prevent creasing the wash, choose the Anti-Crease option (gently tumbling). This function is recommended for delicate laundry. Confirm the selection by pressing the button 1 (On / Off to the Main menu, press the button 6.
). To return
Some functions may not be available on all programs.
25
5. Start delay Press the button 5 to choose the delayed start when you wish the washing program to start after a certain period of time (30´ to 24 hours after you press the Start button).
The estimated time remaining until the end of the washing program will be indicated above the button 5. Press the button 5 for the arrows to appear. Use the Program selector knob or the button 5 to set the delay from 30´ to 6 hours in 30-minute steps, and then from 6 hours to 24 hours in 1-hour steps. Press the button 4 (OK) to confirm your selection. Press the Start button to start. When the countdown reaches zero, the selected washing program will start automatically.
To cancel the delay and start the 03:50 washing process immediately, press the
button 5 .
When Start delay time is once set, it
is not possible to change it; the only
5
possibility is to »Skip it « with pressing
on button and immediately continue
with chosen program.
If you have set the delayed start function and you are using liquid detergent,
we do not recommend choosing a programme with a pre-wash cycle.
6. Dose Modes Using the 6 button, you can choose between ADS (Auto Dose
System (A or B tank)), Dose Assist, or switching the modes OFF. For dosing of
the detergent, see chapter “SPECIAL FEATURES”.
6
A
B
26
STEP 7: START THE WASH
Close the washing machine door and press the Start/Pause button.
Start (short press of the button start/resume) Pause (short press of the button pause) Stop (press and hold for 3 seconds stop or cancel)
Starting
Info
2:20
Remaining time Depending on the selected program, anticipated washing time will be displayed in hours and minutes. Actual washing time will depend on the selected program, load, type of laundry, spin speed etc. Actual washing time may be longer or shorter than initially displayed. Remaining time will be updated during the program duration, depending on the actual amount of laundry and amount of water pumped into the machine. The last remaining time update takes place before the final spinning cycle. In case of uneven distribution of laundry, the time on the display will flash and it will not count down. Once the laundry is evenly redistributed, the washing time will continue and it will stop flashing.
Program running
Info
2:20
Adding or removing laundry after the start of the program
To add or remove laundry during the
Stop program
Paused
Add clothes
progress of a washing program, use
the Start/Pause button to pause the
program. Then, press the button 5 to
select “Add clothes”. 5
The door may be opened when the water is pumped from the machine (but not completely pumped out). Then, add or remove the laundry. Close the door and continue the program. Press the Start/Pause button. The program will resume from the point at which it was interrupted.
Door can not be opened due to high temp. – Please restart
If the door cannot be opened, it is possible that the temperature in the machine is too high, and you won’t be able to add the laundry.
Too late to add clothes – Please restart.
Also, if the door cannot be opened, it is possible that the program has been running for too long and any laundry added at that point would not be efficiently washed.
27
Pausing, stopping or changing the program
Stop program
Paused
Add clothes
1
To pause the program, shortly press the Start/Pause button.
To resume a program, press the Start/ Pause button again.
To stop the washing program, press and hold for 3 seconds button Start/Pause.
Use the button 1 to choose “Stop program”. The program is canceled and the
water is pumped out of the machine if necessary. Only then will you be able to
open the washing machine door. Use the Program selector knob to select a new
program. If necessary, add detergent, and then press the Start/Pause button.
If the temperature in the drum is very high, then cooling procedure starts
before program is canceled.
A washing program can be paused by pressing the ON/OFF button. The washing
machine will switch off. After the washing machine is switched on, press the
Start button to resume the program.
Do not open the detergent compartment while the appliance is operating.
In some cases the door may be locked although no program is in progress (e.g.
in case of an error). To unlock the door, press the Start/Pause button and
hold it for a while.
28
STEP 8: END OF PROGRAM
Cycle completed succsessfully
Start new
Add fav
5
After the end of the washing program, the display will indicate that the program has been successfully completed (“Cycle completed successfully”).
Anti creasing
Cycle completed succsessfully
Stop anti creasing
If you have selected the Anti-Crease extra function, gentle tumbling will continue after the end of the washing program in order to prevent creasing.
6
Open the door towards you and remove the laundry from the washing machine.
Make sure the washing machine drum is empty.
If you do not take any action within 5 minutes after the end of the program,
the display will switch off to standby mode in order to save power. The
display will light up again if you press the ON/OFF button.
After the washing cycle, close the water intake and pull out the washing
machine plug from the power socket.
Favourite programs/Add to fav?
Cycle completed succsessfully
Start new
Add fav
6
After the end of the program, you can use the button 6 to store the program, including all extra settings, as your favourite program.
Create your own favourite programs.
Up to 4 favourite programs can be stored.
Fav list position
1.Favourite
Confirm?
2
4
Back
Choose the favourite program position (number) using the button 2; the most recently used program, including all settings, will be offered. To store a program, confirm with the button 4.
If you do not wish to store the program after the wash, rotate the Program selector knob and you will return to the program selection; or, simply open the washing machine door.
29
Changing a favourite program
If you wish to store a program after the end of the washing cycle, but there is no more room for another
favourite program (only 4 favourite program slots are available), then one of the existing stored favourite
programs can be substituted with a new one.
Fav list position
1. Favourite
Confirm?
Use the button 2 to scroll through the Back list of Favourite programs.
Press the button 4 to confirm the
program to be replaced.
2
4
1. Fav Auto will be replaced
Confirm the replacement by pressing
Yes
No the button 5.
5
6
The list of favourite programs will appear when you switch on the washing
machine.
If you do not take any action for 5 minutes, the display will switch to
standby mode. To activate the display, press the ON/OFF button or open the
washing machine door.
30
SYSTEM SETTINGS
In the Main menu, use the Program selector knob to select System Settings.
Confirm the selection by pressing the button 2.
2
Then, use the Program selector knob to scroll the list of the following
settings that you can adjust: · Child Lock, · ADS (Auto Dose System), ·
Language (language selection), · Water (water hardness), · Temperature
(temperature unit), · Programs (set of programs), · Display (display unit:
contrast & logo), · Sounds (acoustic signals), · Reset.
Use the Program selector knob to scroll to the button 6 (BACK) to return to
System Settings or to the Main menu.
Press the INFO button to display brief information about the setting.
CHILD LOCK Choose between switching the child lock on or off . When the child
lock is activated, no other function can be selected.
Child lock can be activated by pressing the button 1 . This will prevent
children from switching on the machine.
1
Press the button 1 to deactivate the
child lock.
When the child lock is activated, no
other function can be selected.
= Child lock can be activated
1
manually, or it is activated automatically.
Manually: press the buttons 1 and 4 and
hold them for 3 seconds.
Automatically: activated after 3 minutes.
The child lock may only be deactivated
manually by pressing the buttons 1 and
4 and holding them for 3 seconds.
= The child lock cannot be activated.
To temporarily (for 3 minutes) switch off the child lock, press the 1 and 4 buttons simultaneously and keep them pressed for 3 seconds.
1
4
31
ADS (AUTO DOSE SYSTEM) Press the ON/OFF button to switch on/off the ADS
display in the Main menu. For ADS settings, see chapter “SPECIAL FEATURES”.
ON = display the ADS menu in the Main Menu
A
B
OFF = do not display the ADS menu in the Main Menu
Use the button 6 to return to System Settings.
LANGUAGE
EU English
3
EU English
You can choose between 24 languages. Ok Press the button 3 for the arrows
to appear. Use the Program selector knob or the button 3 to scroll the list of
languages. 6 Use the button 6 to confirm the selected language.
Use the button 6 to return to System Settings.
3
6
WATER (WATER HARDNESS)
Use the 1, 2, or 3 key to select water hardness, choosing between the following options: hard, normal, and
soft.
ALuatnoguDaogsieng
A 24RM usasinian Colour
B
Main
Use the 6 key to return to System
24
BBaacckk
White
Settings.
1
2
3
6
Water hardness can be measured with a water hardness indicator (available in a pharmacy). Check the information on water hardness with your local water supply company or authority.
Water hardness
Hardness levels °dH (°N) m mol/l
°fH (°F)
p.p.m.
1 soft
< 7
< 1,5
< 15
< 150
2 normal
714
1,52,5 1525 150250
3 hard
14
2,5
25
250
Water hardness is specified using the following scales: The German water hardness scale (°dH) and the French water hardness scale (°fH).
32
Contact the local waterworks, or measure the water hardness using the supplied
test strip, to check the water hardness in your area.
How to use the test strip: 1. Turn on the water tap and let the water run for
a minute or so. 2. Fill a glass with cold water. 3. Remove the test strip from
its packaging. 4. Dip the test strip in the water for about one second. 5.
Wait one minute. Now compare the colours of the squares with the water
hardness table.
Test strip 4 green 1 red 2 red 3 red 4 red
°dH
°fH
< 3
< 5
4
7
7
12
14
25
21
37
TEMPERATURE (TEMPERATURE UNIT) Choose either °C or °F.
°C
°F
1
2
Use button 1 to select °C; Back Use button 2 to select °F.
Use the button 6 to return to System Settings. 6
PROGRAMS
The Main menu includes the entire set of programs that you can choose using the Program selector knob.
This setting allows only displaying the selected program in the Main menu.
Press the button 1 for the arrows to
appear. Use the Program selector knob
or the button 1 to select a program.
Use the button 3 to set whether this
1
3
6
program is to be displayed or not: On / Off .
Use the button 6 to return to System Settings.
33
DISPLAY UNIT
Display
Contrast
Logotype
Set the contrast and logo display.
Back
1
3
1
2
3
4
5
Use the buttons 1 to 5 to set the contrast.
1
Use the button 1 to toggle logo display
on or off .
If you choose on , the logo will be
displayed on the display unit when the
washing machine is turned on.
1
6
Use the button 6 to return to System Settings.
SOUNDS Choose whether audible signals are switched on or off.
1
4
Use the button 1 to switch acoustic signal on or off . Use the button 4 to
choose between the following settings: low, mid, and high. As you scroll
through the options, a sample 6 audible signal will be sounded.
Use the button 6 to return to System Settings.
RESET This means that all settings will return to the default settings and
your own settings will be deleted.
Confirm the selection by pressing the button 3 (YES).
Use the button 6 to return to System
Settings.
3
6
34
SPECIAL FEATURES
DOSE MODES
1. Display in the Main menu (see »SYSTEM SETTINGS«)
2. Choosing the DOSE MODES in the Main menu: Select program (Use the Program
selector knob) and press the button 6. Choose between: · Options · ADS:
Choosing tank A · ADS: Choosing tank B · Dose Assist (on/off) · Dirt level
A
B
Press the button under icon.
Choose between:
· Dosing detergent from detergent compartment A/B.
(For more detailed explanation see chapter »SPECIAL FEATURES/AUTO DOSE SYSTEM (ADS)«)
· Dosing the recommended amnount od detergent, if Dose Assist is selected
. Select dirt level as well
( you can choose between 3 dirt levels)).
When you select washing program and press Start button, Dose Assist recomendes the amount of detergent. (left: concentrated /right: non-concentrated amount of liquid detergent). Add the recommended amount of detergent to the detergent compartment (compartment for main wash and press the Start button to Start the washing.
AUTO DOSE SYSTEM (ADS)
Filling the ADS tank Choosing the ADS settings by opening the detergent compartment Switching off the automatic dosing function in the ADS menu
With this setting, you will choose which tank (A or B) the detergent will be dispensed from.
A
B
Auto Dose System can be set for each
washing cycle separately.
The most recent setting is stored and
it can be changed for the next washing
D
A
B
cycle.
C
In some programs the ADS setting is not
available.
Press the A/B button and hold if for a while to display information about the content of the A/B tank.
35
A, B. Choose the compartment from which the detergent is to be added depending
on the type of laundry. You can choose between automatic detergent dosing from
compartment A or from compartment B. Confirm the setting with . Before
choosing compartment A or B, you must fill the compartment with liquid
detergent.
Liquid detergent for Colour
Liquid detergent for Black / White / Sensitive / Other. See section D/b
(choosing the type of laundry).
C. Choose how heavily soiled the laundry is. Choose between: Lightly soiled laundry Normally soiled laundry Heavily soiled laundry
The washing program will choose the suitable amount of detergent depending on the setting for how heavily the laundry is soiled.
D. Press the Options button to set the following:
Auto Dose
A Colour
B White
Back
Choose the compartment for which you wish to adjust the settings. (A key 2,3; B key 4,5).
Auto Dose B
2
Clean tank
c
Black
b
4
1 dose 10 ML
Back
a = amount of liquid detergent b = choosing the liquid detergent for the B compartment c = cleaning the selected compartment
a
a. Amount of liquid detergent (ml/cycle from the compartment, A or B. Choose the amount of detergent according to liquid detergent manufacturer’s recommendations specified on the packaging. For thus washing machine model, observe the recommendations for 46 kg loads, medium water hardness and medium-soiled laundry. The washing machine’s factory setting is 50 ml. This amount will be adjusted depending on the water hardness setting, load sensed by the washing machine, and how heavily the laundry is soiled.
Auto Dose B
Clean tank
Black
1 dose 50 ML Back
55 60 : 100
b. Type of detergent, and changing the detergent in the ADS The detergent in the compartment A shall only be used for one type of laundry: coloured wash (Colour). The detergent in compartment B shall be designated for several types of laundry (Black / White / Sensitive / Other).
36
Auto Dose B
Clean tank
Black
1 dose 10 ML Back
White Sensitive Other
When you change the detergent in the tank B, select another type of laundry. The question whether you are sure you wish to change the detergent will appear on the display unit.
We recommend changing the detergent when the detergent tray is empty. Otherwise, the compartment has to be emptied. In this case, however, the detergent compartment has to be closed first.
Pour the other type of liquid detergent into compartment B (e.g. if you have selected Black, you will probably add the special detergent for black laundry).
If the compartment is not empty, then the liquid detergent should be pumped out from the compartment and the compartment should be cleaned (see section c. “Cleaning the compartments”).
c. Cleaning the compartment (detergent tank)
Auto Dose B
Clean tank
Black
1 dose 10 ML
Back
Select Options, then choose Clean tank.
We recommend cleaning the detergent tank once per two months and when it is empty. Before cleaning the detergent tank, close the detergent compartment.
The compartment may be additionally rinsed with an extra amount of water via detergent compartment inlet.
(500 ml of water). Open the detergent compartment to the final position and add water to the compartment
to be cleaned. Then, close the detergent compartment and press the Start button (maximum amount of
detergent that can be added to selected detergent tank is 1.5 l)
Auto Dose
Add 500 ml water to tank B. Close compartment and press start.
If you do not wish to rinse the tank with Back water, the process can be cancelled by
pressing 6 (Back) button.
If you have already started adding the water, the process can no longer be cancelled and water filling process has to be completed.
When cleaning of compartment B is completed, open the detergent compartment to the end position and pour the liquid detergent into compartment B.
Auto Dose
You can now add new detergents.
Ok
Cleaning time for a full tank (draining + rinsing) may be up to 60 minutes.
Filling the compartment with liquid detergent Before adding the liquid
detergent into the tank, pull out the detergent compartment as far as it
will go. (If the detergent compartment is not fully opened, the liquid
detergent will not flow into the tank.)
The washing machine has to be switched on.
37
Please do not fill detergent (liquid detergent) while program is running!
Start adding the liquid detergent to the selected compartment. The level for
the selected compartment, indicated on the display unit, will increase. When
the compartment is full, stop adding the detergent. (maximum amount of
detergent that can be added to selected compartment is 1.5 l).
Before closing the dosing tank, wait for 1 minute to let the detergent flow
into the compartment.
If you add too much liquid detergent, it may overflow into the washing machine
drum. To remove the detergent from the drum, use the Rinse program.
Choosing the ADS settings by opening the detergent compartment
Pull out the detergent compartment as far as it will go, to its end position!
The ADS setting in the Main Menu will be displayed.
All steps are the same as with section 2 (Choosing the ADS settings in the
Main menu).
If you selected OFF in the System Settings (i.e. do not display the ADS menu
in the Main Menu), then the ADS menu will not be displayed when you open the
detergent compartment.
Only add liquid detergents into the ADS tanks.
Do not mix liquid detergent with conditioner. Do not add conditioner into any
ADS tank; conditioner has to be added manually to the compartment labelled
with .
Do not mix different liquid detergents. Before changing the liquid detergent
(depending on the type of laundry), the tanks have to be cleaned. See sections
c, Cleaning the tanks.
Switching off the automatic dosing function in the ADS menu
A
B
Tanks A and B should not be checked
(no check mark in the square ). Thus,
the system will not automatically dose
the detergent.
Liquid detergent has to be added
manually into the detergent
compartment.
38
CLEANING AND MAINTENANCE
CLEANING THE FILTER The washing machine has a filter that will retain smaller
objects such as coins, buttons, hair etc.
1 Before cleaning, drain the water from the washing machine using the Drain
program, and disconnect the washing machine from the power mains. Open the
pump filter cover using appropriate tools (emergency door opening tool is
located on the back side of the dispenser).
2 Release the water drain hose from the holder.
Before cleaning the filter, drain the water from the washing machine by
placing the end of the water drain hose over a large shallow container and
opening the cap on the water drain hose.
3 Gradually rotate the filter in the counter-clockwise direction and pull it
out.
4 Clean the filter thoroughly under running water.
5 Remove all objects and impurities from the filter housing and the impeller.
6 Replace the filter as shown in the figure and fasten it by rotating in the
clockwise direction. For a good seal, the filter seal surface should be clean.
Also re-install the drain hose.
39
CLEANING THE DETERGENT COMPARTMENT AND DOOR RUBBER GASKET
1 Press the tab to completely remove the detergent compartment from its
housing.
A
B
2 Rinse and thoroughly clean the tray. You may also remove the cap from the plug in the conditioner
compartment (A). Clean any residue from the cap and
tube.
Clean the detergent compartment (B) interior.
Replace the cap on the plug.
3 Use a brush to clean the nozzles on the upper side of the detergent
compartment housing.
After a washing program, nozzles that clean the interior of the dispenser are
automatically switched on (only available in some models).
Use a brush to clean the lower part of the detergent compartment housing.
4 Replace the detergent compartment into its housing.
Close the detergent compartment!
Do not wash the detergent compartment in the dishwasher!
5 After every wash, wipe the rubber door seal to extend its useful life.
40
CLEANING THE AUTO DOSE SYSTEM (ADS) Cleaning the detergent compartment:
1
1 Remove the detergent compartment from the detergent compartment housing by pulling it out and pressing the release tab (1).
2
Open the cover for detergent compartment A and B (2).
2 Rinse the detergent compartment by directing a stream of running water through it.
41
CLEANING THE APPLIANCE EXTERIOR Clean the appliance exterior and the display
unit using a soft damp cotton cloth and water. Do not use solvents or abrasive
cleaners that could damage the appliance (please observe the recommendations
and warnings provided by the manufacturers of the cleaning agents).
Do not clean the washing machine with a jet of water!
Always disconnect the washing machine from the power mains before cleaning.
CLEANING THE WASHING MACHINE INTERIOR AGAINST ODOURS Modern detergents often
allow washing clothes at low temperatures. This means that residue may
accumulate in the washing machine, which in turn could cause odours. To avoid
such odorous, we recommend running the self-cleaning program (Drum-cleaning)
once per month. The drum has to be empty.
42
CLEANING THE RINSING HOLES (UNDER THE AGITATOR IN THE DRUM) If you believe
that objects like nails or paper clips fell into the washing machine drum,
check the area underneath the agitator. Such objects may rust (corrode) and
cause stains on your clothes. Nails and other sharp objects can also cause
holes in the fabric. Proceed as follows:
1 Insert a screwdriver or a similar tool into the slot in the rib and
carefully push it to the left.
2 Hold the rib with the other hand and pull it towards you.
3 Lift the drum rib. 4 Remove any objects. 5 Place the rib into the
installation slot indicated with
“F” towards you. Make sure all ribs are firmly in place in their respective
slots in the drum. Push the rib inwards (as indicated by the arrow in the
figure) until it snaps.
If you are using hard water If you are washing with hard water (causing
limescale build-up), a greyish-white film may appear on the washing machine
drum. To remove this film, add vinegar (approximately 2 dl or sodium
bicarbonate “baking soda” (1 tablespoon or 15 g)) into the washing machine
drum and select any program with a temperature of 90 °C, or the Drum Cleaning
program. See STEP 5: Choose the program. Repeat the process as necessary.
Water hardness can be set under “SYSTEM SETTINGS / Water / Water Hardness”.
43
ERRORS WHAT TO DO?
Disturbances from the environment (e.g. the power grid) may result in various
error reports (see Troubleshooting table). In such case: · Switch off the
appliance, wait for 1 minute, switch the appliance back on, and repeat the
washing program. · If the error persists, call an authorized service unit. ·
You will be able to solve most of the problems in appliance operation by
yourself (see Troubleshooting
table below). · Repairs may only be carried out by an adequately trained
person. · Repair or any warranty claim resulting from incorrect connection or
use of the washing machine shall not be
covered by the warranty. In such cases, the costs of repair shall be charged
to the user.
The warranty does not cover the errors or failures resulting from disturbances
from the environment (lightning strike, power grid failures, natural disasters
etc.).
Problem/error
Cause
What to do?
Washing machine · Water level too high. door does not open.
· Drain the water using the Drain or Spinning program. See “Step 5: Choose the program”.
· Water temperature in the washing machine is too high.
· Wait for the water temperature to drop and pump out the water. If you still cannot open the door, use the emergency door opening tool (see chapter “ERRORS WHAT TO DO? / Manual opening of washing machine door”).
Washing program is · Washing machine door is not · Firmly press on the washing machine door until
not in progress.
properly closed.
you hear two clicks when it is closed.
· There is no voltage in the power outlet.
· Check if the plug is connected to the power outlet and whether there is electric current (or voltage) in the outlet.
· Delayed start function has been selected.
· To cancel the delayed start function, press the Start/Pause button and hold it for three seconds.
Washing time is longer than anticipated (the time is regularly updated on the display unit).
· Low inlet water temperature. · Program duration can be up to 60% longer than initially anticipated in the normal progress.
· UKS (unbalance system) · Program time is extended due to the need to stability system engaged due redistribute the laundry in the drum. to unevenly distributed laundry.
· Low mains voltage.
· Washing machine needs more time because the power mains voltage is too low.
· Power supply failure.
· Program time is extended by the duration of the power supply failure.
Display does not light up.
· There is no voltage in the appliance.
· Check if the plug is connected to the power outlet and whether there is electric current (or voltage) in the outlet.
The wording on the · You have not selected your display unit is not preferred language yet. in your language.
· Choose the preferred language (see “STEP 5 / System Settings / Choosing the language”).
Wet laundry (“unbalance” will appear on display)
· A small amount of laundry will often be unevenly distributed.
· Loosen and redistribute the laundry and select the Drain or Spinning
program.
· Increase the amount of laundry in the washing machine and restart the
program (see “STEP 7: Start the wash / Adding or removing laundry after the
start of the program”).
44
Problem/error
Cause
What to do?
There are traces · The laundry was very greasy. of grease (or grease rolls) on the clothes.
· Wash the laundry again. When your laundry is this heavily soiled, add more washing powder or use a liquid detergent in combination with a more powerful (longer) program.
There are still stains on the laundry.
· You used bleach-free liquid · Use a detergent that contains bleach. detergent or powder detergent for coloured laundry.
· You selected an unsuitable program.
· Use special stain removers.
There are white
· This is not due to poor rinsing
residues of
by your washing machine,
washing powder on but rather due to phosphate-
the laundry.
free detergents which contain
ingredients (zeolites) for water
softening. These ingredients
may be deposited on the
laundry.
· Immediately rinse the laundry again. · Use liquid detergents that do not contain zeolites. · Try removing any residues with a brush.
There is powder detergent left in the main wash compartment of the detergent compartment.
· Water pressure not high enough.
· Some washing powders may stick strongly to the detergent compartment if it
is empty.
· Clean the net on the water supply hose.
· Choose higher water level or extra rinse (see “Step 6 / Choose program
settings”).
· Wipe the detergent compartment before adding the powder detergent.
There is conditioner left in the conditioner compartment of the detergent compartment.
· Plug cap is not positioned correctly or it is clogged.
· Make sure the plug cap in the conditioner compartment of the detergent
compartment is positioned correctly.
· Clean the plug cap (see chapter “CLEANING AND MAINTENANCE / Cleaning the
detergent compartment”).
Odour in the washing machine drum.
· Residues of fabric, washing detergent, and conditioner in the filter.
· Check if the filter is clean.
· Development of germs and bacteria.
· Choose a self-cleaning (Drum Cleaning) program (see “STEP 5: Choose the program”).
Machine is moving · Feet not adjusted correctly. during operation.
· Level the feet (see chapter “INSTALLATION AND CONNECTION / Adjusting the feet”).
· Transport bolts not removed.
· Remove the transport bolts (see chapter “BEFORE USING THE APPLIANCE FOR THE FIRST TIME / Transport protection”).
Machine is moving · Unevenly distributed laundry
during spinning.
or not enough laundry.
· The washing machine will automatically decrease the spin speed if vibration
is too strong.
· Increase the amount of laundry in the washing machine and restart the
program (see “STEP 7: Start the wash / Adding or removing laundry after the
start of the program”).
Noisy (loud) drain pump
· Drain pump filter is clogged. · Filter housing and drain pump
impeller are clogged.
· Make sure the drain pump filter is clean. · Make sure the filter housing is
clean.
(See chapter “CLEANING AND MAINTENANCE/ Cleaning the filter”)
45
Manual opening of washing machine door Washing machine door may be opened
manually if the appliance is not connected to the power mains
and if the water has been pumped out of the machine. A Choose the Spinning or
Drain program to pump the water from the machine. If this does not work, water
has
to be drained from the washing machine drum manually. See chapter “Cleaning
the trap and drain pump” in the chapter “CLEANING AND MAINTENANCE”. B Make
sure the main switch is off and that the plug is disconnected from the power
outlet. C Take the emergency door opening tool (found at the back of the
detergent compartment) and insert it into the upper part of the slot on the
right-hand side of the washing machine door latch.
D Press the key (key=the emergency door opening tool) downwards (all the way,
until you hear a click) to unlock the washing machine door. When the door is
unlocked, open it by pulling towards you. 1
2
If the washing machine door still cannot be opened, call a service technician.
46
FAILURE DISPLAY
In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit.
Error 3
Press the INFO button to display the Info Exit error description.
Switch off the appliance and turn it back on. 5
Errors indicated on the display unit may include the following:
Error Error indication on the display What to do? unit
E0 INCORRECT SETTINGS
Restart the programme. If the error reoccurs, call a service technician.
E1 THERMISTOR ERROR Temperature sensor error.
· Inlet water too cold. Repeat the washing program. · If the appliance reports
this error again, call a service
technician.
E2 DOOR LOCK ERROR
Turn the appliance OFF and then switch it again ON. Start the program again. If the error reoccurs, call service technician.
E3 WATER FILLING ERROR
Check the following: · is the water inlet valve open, · is the filter on the
water inlet hose clean, · is the water supply hose deformed (clipped, clogged
etc.), · is the pressure in the water mains between
0.1 and 1 MPa (0.110 bar). Then, press the Exit button to resume the program.
If the error reoccurs, call a service technician.
E6 HEATING ERROR Water heating error.
Restart the program. If the error reoccurs, call a service technician.
E7 DRAINING ERROR Water draining error.
Check the following: · is the pump filter clean, · is the drain hose clogged,
· is the drain clogged, · is the drain hose fitted at the right height (see
chapter on
drain hose installation in the instruction manual). Then, press the Exit
button again. If the error reoccurs, call a service technician.
E8 SPINNING ERROR
Turn the appliance OFF and then switch it again ON. Start the program again. If the error reoccurs, call service technician.
E10 WATER LEVEL SENSOR ERROR Turn the appliance OFF and then switch it again ON. Start the program again. If the error reoccurs, call service technician.
E11 OVERFLOW
If there is water in the drum that exceeds a certain level, and an error is reported on the display unit, the washing program will be interrupted and water will be pumped out of the washing machine. Restart the programme. If the error reoccurs, call a service technician. If there is water in the drum that exceeds a certain level, and an error is reported on the display unit, while the washing machine continues to add water, close the water tap and call a service technician.
E12 MOTOR ERROR / MOTOR CONTROL ERROR
Restart the program. If the error reoccurs, call a service technician.
47
Error E13.1 E13.2 E23
E29 E30 E31 E32 E33 E34 E35 E36
E37
Error indication on the display What to do? unit
UNBALANCE EMPTY DRUM
Call a service technician.
INERTIA ERROR
Call a service technician.
DOOR UNLOCK ERROR Error while unlocking the door.
Door is closed, but it cannot be unlocked. Turn off the washing machine, then turn it back on. If the error reoccurs, call a service technician. See instructions for opening the door chapter on manual door opening.
REED SWITCH 1 ERROR
Call a service technician.
REED SWITCH 2 ERROR
Call a service technician.
PERISTALTIC PUMP 1 ERROR Call a service technician.
PERISTALTIC PUMP 2 ERROR Call a service technician.
AD1 DETERGENT LEVEL SENSOR ERROR
Restart the programme. If the error reoccurs, call a service technician.
AD2 DETERGENT LEVEL SENSOR ERROR.
Restart the programme. If the error reoccurs, call a service technician.
COMMUNICATION AD AND PMCU Turn off the appliance and turn it back on. If the error reoccurs, call a service technician.
COMMUNICATION UI AND PMCU Error in UI and PMCU communication.
Turn off the appliance and turn it back on. If the error reoccurs, call a service technician.
PMCU/UI** software versions are Call a service technician. not compatible.
UNBALANCE Unevenly distributed laundry.
Manually distribute the laundry and run the spinning program.
UNABLE TO LOCK DOOR
Open and firmly close the door again to final position. If the error reoccurs, call a service technician.
STERIL TUB ALERT Warning Self-cleaning program
Message “Sterile Tube alert” is displayed every 40 completed wash cycles. Use the self-cleaning program (DRUM CLEANING); see STEP 5.
Preparing to door unlocking.
Wait that process is finished. If after this process no error is
(press INFO): Draining must be
shown, new cycle can be run.
performed. Wait for door unlocking.
DRAIN SYSTEM ALERT
Alert about reduced water flow in the pumping stage. Please check user manuals.
** UI = (User Interface)
Unevenly distributed laundry or lumps of laundry in the washing machine drum may cause problems such as vibration and noisy operation. The washing machine will sense this and activate the UKS (unbalance system). Smaller loads (e.g. one towel, one sweater, one bathrobe etc.) or clothes made of materials with special geometrical properties are virtually impossible to distribute evenly across the washing machine drum (slippers, large items etc.). This results in several attempts to redistribute the laundry, which in turn leads to longer program duration. In extreme cases of unfavourable conditions, the program can be completed without the spinning cycle. UKS (unbalance system) allows stable operation and extends the useful life of the appliance.
48
SERVICE
BEFORE CALLING A SERVICE TECHNICIAN When you contact a service centre, please
state the model (1), type (2), and serial number (3) of your washing machine.
Model, type, and serial number are indicated on the rating (type) plate
located on the washing machine door casing.
In case of a failure, only use approved spare parts by authorized
manufacturers.
Repair or any warranty claim resulting from incorrect connection or use of the
washing machine shall not be covered by the warranty. In such cases, the costs
of repair shall be charged to the user.
1, 2, 3
2
31
TYPE: WMXX.XXXXX MODEL: XXXXXX.X
Art.No.: XXXXXX/XX Ser.No.: XXXXXXXX
XXX-XXX V ~ XXXX W
X kg XXA
IPX4 XX Hz XX-X MPa
CYCLE COUNTER Accessible only from Main Menu (program select menu) by pressing the two left buttons below the display. Then you will see the total number of washing cycles performed by the appliance.
49
TECHNICAL INFORMATION
PRODUCT INFORMATION SHEET ACCORDING TO EU-REGULATION NO. 2019/2014 (depending of model)
Supplier’s name or trade mark:
Supplier’s adress (b):
Model identifier:
General product parameters:
Parameter
Value
Parameter
Rated capacity (a) (kg)
9,0
Dimensions in cm
EEIW (a) Washing efficiency index (a)
57,9 1,04
Energy efficiency class (a) Rinsing effectiveness (g/kg) (a)
Energy consumption in kWh per cycle, based on the »eco 40-60« programme. Actual energy consumption will depend on how the appliance is used.
1,000
Water consumption in litre per cycle, based on the »eco 40-60« programme. Actual water consumption will depend on how the appliance is used and on the hardness of the water.
Maximum temperature inside the treated textile (a) (°C)
Rated capacity
Half
39 Remaining moisture
28 content (a) (%)
Quarter 27
Spin speed (a) (rpm)
Rated capacity
Half
1600 1600 Spin-drying efficiency class (a)
Quarter 1600
Programme duration (a) (h:min)
Rated capacity
Half
3:30 2:50 Type
Quarter 2:50
Airborne acoustical noise emissions in the spinning phase (a) (dB(A) re 1 pW)
Airborne acoustical noise
76
emissions class (a) (spinning
phase)
Off-mode (W)
0,30
Standby mode (W)
Delay start (W) (if applicable)
/
Networked standby (W) (if applicable)
Minimum duration of the guarantee offered by the supplier (b): 2 years
This product has been designed to release silver ions during the washing cycle
[YES/NO]
Value Height 85,0 Width 59,5 Depth 58,5
[A/B/C/D/E/F/G] (c) 3,7
64
Rated capacity
44
Half
44
Quarter 44
[A/B/C/D/E/F/G] (c) [built-in/ free standing] [A/B/C/D] (c) 0,30 /
Additional information: Weblink to the supplier’s website, where the information from point 9 Anex II to Commition Regulation (EU) 2019/2023 (a) (b) is found: (a) for the »eco 40-60« programme. (b) changes to these items shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU) 2017/1369. (c) if the product database automatically generates the definitive content of this cell the supplier shall not enter these data.
50
PRODUCT INFORMATION SHEET ACCORDING TO EU-REGULATION NO. 2019/2014 (depending of model)
Supplier’s name or trade mark:
Supplier’s adress (b):
Model identifier:
General product parameters:
Parameter
Value
Parameter
Rated capacity (a) (kg)
9,0
Dimensions in cm
EEIW (a) Washing efficiency index (a)
51,8 1,035
Energy efficiency class (a) Rinsing effectiveness (g/kg) (a)
Energy consumption in kWh per cycle, based on the »eco 40-60« programme. Actual energy consumption will depend on how the appliance is used.
0,490
Water consumption in litre per cycle, based on the »eco 40-60« programme. Actual water consumption will depend on how the appliance is used and on the hardness of the water.
Maximum temperature inside the treated textile (a) (°C)
Rated capacity
Half
38 Remaining moisture
20 content (a) (%)
Quarter 20
Spin speed (a) (rpm)
Rated capacity
Half
1600 1600 Spin-drying efficiency class (a)
Quarter 1600
Programme duration (a) (h:min)
Rated capacity
Half
3:30 2:51 Type
Quarter 2:51
Airborne acoustical noise emissions in the spinning phase (a) (dB(A) re 1 pW)
Airborne acoustical noise
76
emissions class (a) (spinning
phase)
Off-mode (W)
0,30
Standby mode (W)
Delay start (W) (if applicable)
/
Networked standby (W) (if applicable)
Minimum duration of the guarantee offered by the supplier (b): 2 years
This product has been designed to release silver ions during the washing cycle
[YES/NO]
Value Height 85,0 Width 59,5 Depth 58,5
[A/B/C/D/E/F/G] (c) 4,3
49
Rated capacity
44
Half
44
Quarter 44
[A/B/C/D/E/F/G] (c) [built-in/ free standing] [A/B/C/D] (c) 0,30 /
Additional information: Weblink to the supplier’s website, where the information from point 9 Anex II to Commition Regulation (EU) 2019/2023 (a) (b) is found: (a) for the »eco 40-60« programme. (b) changes to these items shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU) 2017/1369. (c) if the product database automatically generates the definitive content of this cell the supplier shall not enter these data.
51
PERFORMANCE DATA Program Eco 40-60 1*)
Maximum load 9 / 4,5* / 2,5** kg
Everyday wash / Universal wash 2) Mix/Synthetics 2)
9 / 4,5* kg 3,5 kg
1) PRODUCT INFORMATION SHEET According to EU-Regulation No. 2019/2014 2) 40 °C program for testing institutes. The 40 °C option has to be set. Half load ** Quarter load
ENERGY LABELLING European test standard Washing program
Connection Noise testing method
1)
9 kg cotton Eco 40-60 1) Cold water 15 °C IEC-60704-2-4
Temp. °C
60 40
TECHNICAL INFORMATION Height Width Depth Weight Drum volume Rated power Heater
power Water pressure
Material for the drum and dispenser Housing material
Water connection Drain hose
850 mm 595 mm 585 mm 77,5 kg 60 l See rating plate See rating plate 0,11 MPa 110 kp/cm2 10100 N/cm2 Stainless steel Hot-dip galvanized and powder coated sheet metal, or stainless steel sheet (depending on model) 1.5 m pex hose 1.6 m polypropylene hose
52
PROGRAM TABLE
Prewash Temp. °C Super rinse Agitation level** Spinning speed (rpm) Residual moisture [%] Maximum load (kg) Water consumption (approximately, in litres) Power consumption (approximately, kWh) Program duration (approximately, in hours and minutes)
Program Universal wash Cotton Eco 40-60 1*) Mix/Synthetics Wool/Hand wash Dark wash Time program Auto Quick Heavy Easy care Jeans Shirts Steam Refresh Quick PRO Hygiene Bedding Allergy program cotton Allergy program synthetics Rinse Spin Drain Drum cleaning
X 602) X I/N 1600
9 80 2,10
2:26
X 40/20 X N 1600
9 78 1,80 2:59/1:33
1600 44 9 64 1,00
3:30
X 402) X N/S 1200
3,5 60 0,60
1:54
X 30 X H 800
2 58 0,28
0:52
X 40 X E 1200
3 40 0,53
1:15
X 30
E 1000
2
–
–
–
X 40 X N 1600
9
–
–
–
X
X N 1600
9 40 0,50
0:30
X 60 X I 1600
9 100 2,50
2:46
X 40 X N/S 1200
3,5 60 0,65
1:57
X 40 X E 1200
3,5 50 0,60
1:18
X 40 X E 1200
3,5 45 0,45
1:09
– – 1,5 –
–
0:20
X 40 X N 1200
4 40 0,50
0:59
X 60 X I 1600
5 87 1,80
2:27
X 60 X N 1600
4 52 1,67
2:15
X 60 X I 1600
9 95 1,85
2:43
X 60 X N/S 1200
4 70 1,10
2:32
X N 1600
3,5 30 0,06
0:29
– 1600
9
–
0,06
0:17
–
9
–
0,01
0:01
S
–
–
–
Cold wash *Agitation level (I = Intensive rhythm, N = Normal rhythm, E = Extra sensitive rhythm, S = Sensitive rhythm, H = Hand wash rhythm) 1)PRODUCT INFORMATION SHEET According to EU-Regulation No. 2019/2014 2) 40 °C program for testing institutes. The 40 °C option has to be set.
The above table includes several examples of the use of energy, water, and time for several different program settings. Actual consumption or duration may vary depending on the water pressure, water hardness, water inlet temperature, room temperature, weight and type of load, changes in power supply, and selected options or settings. In the examples specified here, the draining is set to Normal and no additional options are selected.
Maximum or nominal load applies to laundry prepared pursuant to the IEC 60456 standard.
53
W4096R/3
Prewash Temp. °C Super rinse Agitation level** Spinning speed (rpm) Residual moisture [%] Maximum load (kg) Water consumption (approximately, in litres) Power consumption (approximately, kWh) Program duration (approximately, in hours and minutes)
Program Universal wash Cotton Eco 40-60 1*) Mix/Synthetics Wool/Hand wash Dark wash Time program Auto Quick Heavy Easy care Jeans Shirts Steam Refresh Quick PRO Hygiene Bedding Allergy program cotton Allergy program synthetics Rinse Spin Drain Drum cleaning
X 602) X I/N 1600
9 80 2,10
2:26
X 40/20 X N 1600
9 78 1,80 2:59/1:33
1600 44 9 62 1,00
3:30
X 402) X N/S 1200
3,5 60 0,60
1:54
X 30 X H 800
2 58 0,28
0:52
X 40 X E 1200
3 40 0,53
1:15
X 30
E 1000
2
–
–
–
X 40 X N 1600
9
–
–
–
X
X N 1600
9 40 0,50
0:30
X 60 X I 1600
9 100 2,50
2:46
X 40 X N/S 1200
3,5 60 0,65
1:57
X 40 X E 1200
3,5 50 0,60
1:18
X 40 X E 1200
3,5 45 0,45
1:09
– – 1,5 –
–
0:20
X 40 X N 1200
4 40 0,50
0:59
X 60 X I 1600
5 87 1,80
2:27
X 60 X N 1600
4 52 1,67
2:15
X 60 X I 1600
9 95 1,85
2:43
X 60 X N/S 1200
4 70 1,10
2:32
X N 1600
3,5 30 0,06
0:29
– 1600
9
–
0,06
0:17
–
9
–
0,01
0:01
S
–
–
–
Cold wash *Agitation level (I = Intensive rhythm, N = Normal rhythm, E = Extra sensitive rhythm, S = Sensitive rhythm, H = Hand wash rhythm) 1)PRODUCT INFORMATION SHEET According to EU-Regulation No. 2019/2014 2) 40 °C program for testing institutes. The 40 °C option has to be set.
The above table includes several examples of the use of energy, water, and time for several different program settings. Actual consumption or duration may vary depending on the water pressure, water hardness, water inlet temperature, room temperature, weight and type of load, changes in power supply, and selected options or settings. In the examples specified here, the draining is set to Normal and no additional options are selected.
Maximum or nominal load applies to laundry prepared pursuant to the IEC 60456 standard.
54
Adjustment of the displayed washing time Advanced technology allows the
appliance to sense the amount of laundry and add the required amount of water
during the washing process. Depending on the washing load, washing time can be
longer or shorter and the time displayed will be adjusted accordingly.
Moreover, displayed washing time may change due to differences in inlet water
temperature. At low inlet water temperatures, washing time can be longer; at
higher temperatures, it can be shorter. Unevenly distributed laundry or lumps
of laundry in the washing machine drum can cause problems such as vibration
and noisy operation. The appliance can sense such lumps and will try to
redistribute the laundry. Smaller loads (e.g. one towel, one sweater, one
bathrobe etc.) or clothes made of materials with special geometrical
properties are virtually impossible to distribute evenly across the washing
machine drum (slippers, large items etc.). This results in several attempts to
redistribute the laundry, which in turn leads to longer program duration.
55
TABLE: WASHING MODE/TEMPERATURE
Washing mode
Normal / Off Green Speed Allergy Intense
Program Universal wash Cotton Eco 40-60 Mix/Synthetics Wool/Hand wash Dark
wash Time program
Auto program Quick program Heavy Easy care Jeans Shirts program
Steam Refresh Quick Pro
Hygiene Bedding program Allergy program cotton Allergy program synthetics
Rinse Spin Drain Drum cleaning
Cold wash
-90°C -90°C
20°C-90°C 20°C-90°C
-90°C -90°C
30°C-90°C 40°C-90°C 40°C-90°C
-60°C
20°C-60°C
,30°C-40°C
,30°C-40°C
-60°C/ -90°C
-90°C
,40°,60°,90°C
-90°C
-60°C
20°C-60°C
,30°C-40°C
,30°C-40°C/ , 30°C-60°C
-60°C 30°C-60°C ,30°C-40°C ,30°C-40°C 30°C-40°C
40°C-60°C 40°C
30°C-90°C
-60°C 30°C-60°C ,30°C-40°C 30°C-40°C ,30°C-40°C/ , 30°C-60°C
40°C-60°C 40°C
40°C/ 40°C-60°C 60°C-90°C 40°C-90°C 60°C-90°C
60°C
40°C-90°C
40°C-90°C
56
Spinning speed (rpm) Super Rinse Prewash High water level Anti-crease Start delay
TABLE OPTIONS
Options
Program Universal wash Cotton Eco 40-60 Mix/Synthetics Wool/Hand wash Dark
wash Time program Auto program Quick program Heavy Easy care Jeans Shirts
program
Steam Refresh
Quick Pro Hygiene Bedding program Allergy program cotton Allergy program
synthetics Rinse Spin Drain Drum cleaning
Option (setting) available on Program
1600 1600 1600 1200 800 1200 1000/1600 1600 1200/1600 1600 1200 1200 1200
1200/1600 1600 1600 1600 1200 1600 1600 / /
57
DISPOSAL
Disposal / recycling of packaging Our product packaging is made of
environmentally friendly materials that can be recycled, disposed of, or
destroyed without any hazard to the environment. To this end, packaging
materials are labelled appropriately. The symbol on the product or its
packaging indicates that the product should not be treated as
normal household waste. The product should be taken to an authorized
collection centre for waste electric and electronic equipment processing. When
disposing of an appliance at the end of its useful life, remove all power
cords and destroy the door latch and switch to prevent the door from locking
or latching (child safety). Correct disposal of the product will help prevent
any negative effects on the environment and health of people which could occur
in case of incorrect product removal. For detailed information on removal and
processing of the product, please contact the relevant authority in charge of
waste management, your waste disposal service, or the store where you bought
the product.
58
QUICK GUIDE
SORT THE LAUNDRY.
Close the zippers fasteners. Empty the pockets and turn them inside out. Check
the laundry care symbols. Sort the laundry based on how heavily soiled it is,
by colour, and by material.
SWITCH ON THE MAIN ON/OFF SWITCH (ON/OFF)
OPEN THE WASHING MACHINE DOOR AND INSERT THE LAUNDRY.
Before doing so, make sure the drum is empty.
ADD THE DETERGENT AND THE CONDITIONER.
Recommended detergent amount is usually indicated on the packaging. For
smaller wash loads, use a smaller amount of detergent. See chapter “SPECIAL
FEATURES” for ADS settings.
CHOOSE THE WASHING PROGRAM.
Turn the program selector knob to the desired washing program. Selected
program will be indicated on the display unit.
CHOOSE THE PROGRAM SETTING.
Choose the settings by pressing the relevant buttons.
CLOSE THE WASHING MACHINE DOOR AND PRESS
THE “START” BUTTON.
Anticipated washing time, in hours and minutes, will be indicated on the
display.
END OF PROGRAM
Open the door and remove the laundry from the washing machine. See chapter
“CLEANING AND MAINTENANCE”. Close the door. Switch off the main on/off switch.
Close the water tap and remove the power plug from the power socket.
We reserve the right to modifications.
59
Gorenje, Partizanska 12, 3320 Velenje, Slovenija www.asko.com
WM75.1 ADS
en (01-24)