tp-link X10-4G Deco Router Installation Guide

tp-link X10-4G Deco Router

Product Specifications

• Brand: TP-Link
• Model: Deco
• LED Colors: Yellow, Blue, Green, Red, White
• Connectivity: 4G/WAN, 5G

Product Usage Instructions

Getting Started

1. Please ensure you are online (via Wi-Fi or mobile data) during the app download and login steps.
2. Download the TP-Link Deco app on your iOS or Android device.
3. Follow the app instructions to set up your Gateway Deco first and then add other Decos to the network.

LED Status

• Pulse Yellow: Deco is resetting.
• Solid Yellow: Deco is starting up.
• Pulse Blue / Solid Blue: Deco is ready for setup WPS is in progress, or Deco is setting up.
• Pulse Green: Deco is upgrading firmware.
• Solid Green: Deco is set up and connected to 4G/WAN.
• Solid White: Deco is set up and connected to 5G.
• Pulse Red: Satellite Deco is disconnected from the main Deco.
• Solid Red: Deco has an issue.

Frequently Asked Questions (FAQ)

Q: How do I reset my Deco?

• A: To reset your Deco, press and hold the reset button for 10 seconds until the LED light flashes red.

Q: Can I use the Deco with a wired connection?

• A: Yes, you can connect your Deco to a router or modem using an Ethernet cable for a wired connection.

Getting Started

Please remain online (Wi-Fi or mobile data) throughout the app download and login steps.

1. Download the TP-Link Deco app for iOS or Android.
2. Follow app instructions to set up your Gateway Deco (DSL/4G/5G) first, then add other Decos (if any) to the network.

LED Status

Each Deco has an LED light that changes color according to its status. See the explanation below.

The solid white LED is for 5G Deco routers only.

Safety Information

• The adapter shall be installed near the equipment and shall be easily accessible.
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Use only power supplies that are provided by the manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
• Please read and follow the above safety information when operating the device.
• We cannot guarantee that no accidents or damage will occur due to improper use of the device.
• Please use this product with care and operate at your own risk.
• TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863.
• The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/.
• TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
• The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/.
• For TP-Link Branded Products Only. For the information about warranty period, policy, and procedures, please visit https://www.tp-link.com/en/support
• THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).
• TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN PLACE OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.
• TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in according with TP-Link’s guidelines for some period which depends on the local service from the date of original retail purchase by the end-user purchaser.

GNU General Public License Notice

• This product may include software code developed by third parties, including software code subject to the GNU General Public License (“GPL”). As applicable, TP-Link (“TP-Link” in this context referring to the TP-Link entity offering respective software for download or being responsible for distribution of products that contain respective code) provides, by itself or with the support of third parties (e.g. the TP-Link Corporation Limited), mail service of a machine-readable copy of the corresponding GPL source code on CD-ROM upon request via email or traditional paper mail. TP-Link will charge for a nominal cost to cover shipping and media charges as allowed under the GPL. This offer will be valid for at least 3 years.
• For GPL inquiries and the GPL CD-ROM information, please contact GPL@tp-link.com or write to Suite 901, New East Ocean Centre, Tsim Sha Tsui, Hong Kong.
• Additionally, TP-Link provides a GPL-Code-Centre under https://www.tp-link.com/support/gpl/ where machine-readable copies of the GPL source codes used in TP-Link products are available for free download.
• The GPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors.
• For further information about GNU General Public License please refer to the following website: https://static.tp-link.com/resources/document/GPL%20License%20Terms.pdf

Need some help?

• Visit https://www.tp-link.com/support/ for technical support, the user guide, FAQs, warranty & more at www.tp-link.com.

References

• Link: Simple, secure one-click payments
• Anatel — Agência Nacional de Telecomunicações
• WiFi Networking Equipment for Home & Business | TP-Link
• Support | TP-Link
• CE Regulatory Compliance | TP-Link
• TP-Link Product Support - Wireless Networking Equipment Support
• GPL Code Center | TP-Link
• Regulatory Compliance | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>