FOVKSUC U1 Wireless Doorbell User Manual

: June 17, 2024
: Fovksuc

Table of Contents

Product Features
Content
What You Should Know Before Installation
Product Structure Diagram
Set UP and Operation
Installation
Specifications
Chimes List
Com mom Problems and Troubleshooting
Customer Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wireless Doorbell Kit
User Manual FOVKSUC U1 Wireless Doorbell

Product Features

Modern and stylish design
600 feet operating range(Over 1000 feet in open area)
60 selectable music/chime
5-level adjustable volume(Minimum to mute)
Easy to install and use
Bionic comfortable button
Easy mix and match with more receivers and transmitter
Low power consumption
Memory function
Music/chime scroll through function

Content

1 Transmitter+f Receiver
FOVKSUC U1 Wireless Doorbell - Figure 1 1 Transmitter+2 Receiver

FOVKSUC U1 Wireless Doorbell - Figure 2

2 Transmltter+1 Receiver
Two or more transmitters pairng (up to 20 transmitters can be supported by the same receiver) FOVKSUC U1 Wireless Doorbell - Figure 3

What You Should Know Before Installation

Test the operating range you desire. Choose an electric outlet at the height of 3.3 feet at least and plug in the receiver and take the button outside the door to test if it can work well within the range you have chosen.
Set a desired music (different or same one) for transmitters before installation. For music setting, see Operating Instructions.Doorbells have been paired and set to a default chime (Ding Dong) before leaving factory.
Please do not install transmitter on metal doors since it is hard for the signal to transmit.
Please take out the battery insulating strip before using. (As picture()
Ensure all surfaces are clean by wiping the installation area with a clean cloth. Please note that the sticker will have poor adhesion if you attach it to a dirty or uneven surface.
Sunlight or rain will also affect the adhesion over a onger period of time.

Product Structure Diagram

AC Powered Receiver

FOVKSUC U1 Wireless Doorbell - Figure 5

Waterproof Transmitter

Volume/SET button
Previous button
Next button
LED light
Speaker
Plug
LED on the push button (Transmitter)

Set UP and Operation

Press the push button to test whether it is paired with the doorbell.The doorbell LED indicator flashes and ring.If it does not,see”Connect a Push Button” on page 5.

Adjust the Volume
There are 5 levels of volume for choosing.Find the Volume Control button( ) on left side of receiver.press this button repeatdly to get desired volume level,Minimum to mute.
Music/Chimes Selection
There are 60 choices of music/chimes.press short this button( )on receiver to cycle through the different music/chimes.
Long press this button( )or button( ) On receiver to Play The First 2 Seconds of Each Music/Chime.If you like the current music/Chime, just press this or button.
Note:doorbell has a smart memory function that can
remember your last melody and volume level
3.Pairing Transmitters and Setting Music/Chime
You can connect up to 20 Transmitters to your
doorbell.

Installation

Choose a location that is not near a heat source or on something that moves (like a door). For non-mounting locations, choose a place where the doorbell will be easy to see and hear.

For Receiver:
Plug-in receiver: Just plug receiver into standard outlet in room.
For Push button:

IMPORTANT:
Before installation, please test if the operating range you choose is working and set music if needed.
Before you drill any hole in the wall, please make sure there are not cables or pipes.
To install you will require a drill and cross-headed screwdriver.

Open the Transmitter with screw driver and separate the front cover from the back cover.
Penetrate the two standby holes at the back cover with two screws. Then fix the screws on the wall at suitable height.
0r you can stick the Transmitter with the double-sided adhesive tape.
Battery Replacement of Push Button

FOVKSUC U1 Wireless Doorbell - Figure 9

Specifications

| Doorbell| Push Button
---|---|---
Operating
Temperature| -4°F to
140°F| -4°F to
140°F
Radio Frequency| 433 MHz| 433 MHz
Range (open field)| 1,000 ft| 1,000 ft
Sound Level (typical)| 0-110 dB|
Battery Type| 11 Plug-in
ACM 250V| CR2032
Battery Life
(5 activations/day)| Up to 5
years| Up to 3 years
Rain Proof| N/A| IP55
Internal Sounds| 60 Melody| N/A
Type of Bulb| LED/Blue| LED/Blue

Chimes List

1. Ding dong, Ding dong
2.Ding dong, Ding dong
3. Ding dong, Ding dong
4. Corsica Doorbell
5. Ding dong
6. Ding dong Chime
7. Hello Welcome(English)
8. Westminster Chimes1
9. Westminster Chimes2
10. Big ben electronic doorbell
11-4. NEWAGE-01-NEWAGE-030
41.Classical organ
42.Morning
43.Dingdong merrily on high
44.Waltz of the flowers
45.For Alice| 46The William tell overture
47The cuckoo waltzes
48. Minuet in G
49. Happy birthday
50. Fantaisie Impromptu
51. Yesterday Once More
52. Clarinet Polka
53. Russe Dance
54. Souvenirs Denfance
55. Jasmine Flower
56. Waltzes_0p. 34 No.2
57. Hungarian Dance
58. Spring Song
59. Accordion Tango
60. Alarm Sound Effect
---|---

Com mom Problems and Troubleshooting

Reason	Solution

Low-power battery in transmitter,The less power in transmitter, the shorter range is.| Replace with a new battery.
Reset the receiver by accident so that
transmitter is not paired with receiver any more.| Re-pair receiver with transmitter following the Operation Instructions.
There’s rust on the battery contacts or button area on PCB board of transmitter.| Remove the rust to see if it can re-work
Receiver keeps ringing continuously and LED indicator of transmitter stays on.
Raindrops have gone inside transmitter,which
causes the short circuit and let transmitter keep transmitting signals.| Remove the battery and PCB board of transmitter and then dry them with a hair dryer. Change the install location of transmitter if necessary.