Kdlini DAVID POMPA Minimal LED Pendant Light Instruction Manual
- June 17, 2024
- Kdlini
Table of Contents
Kdlini DAVID POMPA Minimal LED Pendant Light
Product Information
Specifications
- Product Name: Minimal
- Designer: David Pompa
- Manufacturer: Kundalini
- Model Number: Not specified
- Revision: Rev.02 – March 2022
- Dimensions: L78xW35xH22 mm
- Input Voltage: 100/240 V
- LED Specifications: 1 x 3.15W, VF max 9V, 2700K, 410lm
- Power Supply: DC 350mA constant current (not included)
- Independent Use Voltage Output: Vout max 60V (SELV)
Product Usage Instructions
Assembly Instructions
Follow the provided assembly instructions to set up the product correctly.
Wiring Diagram
Refer to the wiring diagram for proper connection of the components.
Optional Components
If using optional components such as Box N.2, Box N.3, or any other
optional parts, ensure they are installed as per the instructions provided.
LED Installation
Install the LED board with the specified wattage and voltage requirements
securely.
Power Supply Connection
Connect the power supply with the recommended specifications to ensure
proper functioning of the product.
Bulb Replacement
To replace bulbs, lampadine, ampoules, leuchtenmittel, bombillas, follow
the guidelines outlined in the manual.
FAQ (Frequently Asked Questions)
-
Q: Can I use a different power supply than the recommended one?
A: It is recommended to use the specified power supply to avoid damage to the product. -
Q: How do I replace the LED board?
A: Follow the disassembly instructions provided in the manual to replace the LED board. -
Q: What should I do if the product does not turn on?
A: Check the power supply connection and ensure all components are properly assembled before contacting customer support.
WARNING
- The safety is guaranteed by the appropriate use of the following instructions, so you must keep them.
- Always disconnect the main voltage before working on the appliance.
- Never use abrasive products or aggressive detergents for cleaning the lamp.
- If the external cable of this appliance is damaged, it must be replaced by the manufacturer, its after sales service or other equivalent qualified person only in order to avoid any danger.
- Kundalini will not provide a replacement until the nature of defect has been determined.
ASSEMBLY INSTRUCTIONS
Disconnect the mains voltage supply. Pass the feeding cable through the cylinder B and the false ceiling canopy C. Once inserted the feeding cable in the cable clamp D, screw the screws E – Fig.1 -. Attention: it is recommended to do not cut the cable, but to put the excess in the false ceiling. Screw the cylinder B on the body lamp A – Fig.2 -. Drill the false ceiling using a Ø 45 mm hole saw where the lamp is going to be installed. Connect the lamp to a driver in accordance with the technical specifications. If you use the driver F supplied by Kundalini (optional) respect the following instructions. Unscrew the screw and open the driver F – Fig.3 -. Connect the power leads from the grid and the lamp to the terminal boards of the driver F following the instructions – Fig.4 -. Attention: make sure to respect the lamp cables polarity (”+” black, “-” white). Close again the driver F by screwing the screw. Insert the driver F and the bracket G in the hole of the false ceiling. Adjust the bracket G according to the thickness of the false ceiling panel and fix it using the nut H. Screw the ratchet I over the disc L to lock the structure – Fig.5 -. Reconnect the mains voltage supply.
Canopy (optional)
Disconnect the mains voltage supply. Unscrew the ratchet M to separate the
canopy cover N from the bracket O – Fig.6 -. Pass the feeding cable through
the ratchet M, the canopy cover N, the central bushing P and the cable clamp Q
by unscrewing the screws R. Once inserted the feeding cable in the cable clamp
Q, screw the screws R – Fig.7 -. Fix the bracket O using screws and Fischer
screws suited to the ceiling characteristics. Connect the power leads from the
grid and the lamp to the terminal boards of the driver F following the
instructions – Fig.8 -. Connect the earth wire (colour yellow-green) to the
specific device following the instructions – Fig.9 -. Reposition the canopy
cover N on the bracket O and block by screwing in ratchet M – Fig.10 -.
Reconnect the mains voltage supply.
BULBS, LAMPADINE, AMPOULES, LEUCHTENMITTEL, BOMBILLAS, ТИП ЛАМПОЧКИ
board LED 1 x 3,15W – VF max 9V – 2700K – 410lm
FEEDING, ALIMENTAZIONE, ALIMENTATION, SPANNUNG, TENSION DE RED,
НАПРЯЖЕНИЕ
DC 350mA constant current (not included)
Independent use Vout max 60V (SELV) dim. L78xW35xH22 mm
Kdln Srl Viale L. da Vinci, 277 20090 Trezzano sul Naviglio, Milano T. +39 0236538950 info@kdln.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>