BulletProof Hitches Medium Duty 2 Inch Drop Rise Hitch User Guide
- June 17, 2024
- BulletProof Hitches
Table of Contents
BulletProof Hitches Medium Duty 2 Inch Drop Rise Hitch
Product Catalog
WORLD’S STRONGEST ADJUSTABLE TRAILER HITCHES & ACCESSORIES
Our Story
A MONUMENTAL TASK, a BULLETPROOF SOLUTION!
The towing capabilities of pickup trucks have steadily increased over the last 30 years. New trucks are capable of towing 30,000+ pounds. This consistent increase in towing ability created a need for a trailer hitch that could match and exceed the tow rating of new trucks while providing the necessary versatility to tow multiple trailers at different ride heights. We set out to create the ultimate trailer hitch to outperform anything the industry had ever seen before.
REQUIREMENTS FOR THE PERFECT HITCH:
- Gross trailer weight rating of 36,000 pounds trailer weight plus 6,000 pounds tongue weight
- Height adjustment in less than 20 seconds
- Ball size adjustment in less than 20 seconds
- Ability to utilize a wide variety of attachments to tow any trailer
- The highest achievable quality
- Fully welded components that are free of any welding defects
- Precision fit and finish for a near-perfect receiver connection that is noise-free
- Attractive design to complement our vehicles
- A no-hassle lifetime construction warranty that is second to none, backed by an incredible support team
- A solid steel receiver shank that fills the entire receiver.
After laying out the requirements, we designed a line of trailer hitches that would exceed all competitors for years to come. And so, the BulletProof Hitch was born!
World’s Strongest Adjustable Trailer Hitches & Accessories 2” (Class 4), 2.5” (Class 5), & 3” Receiver shanks available – Drop/Rise sizes from 2” to 16” Lifetime Guarantee!
Sizing Chart
How To Find The Perfect BulletProof Hitch for Your Vehicle
In order to find out which BulletProof Hitch will work best for your vehicle, please follow these steps:
STEP 1: Measure the opening of the receiver tube (Figure A) to
determine what size shank your vehicle requires. It will either be 2”, 2.5” or
3” (Please note the 3” is only applicable to some 2017 and newer Ford Super
Duty trucks and some RVs/semis.)
STEP 2: Park your vehicle on level ground and measure from the ground to
the bottom inside of the receiver tube (Figure B) , then take that
measurement and apply it to the information below. As you can see in the
example, this truck would require our 6” drop.
Receiver height as measured:
Under 13” requires a hitch in the rise position (call us to help you)
13”-15” requires 2 ” drop/rise hitch
16”-18” requires 4” drop/rise hitch
19”-21” requires 6” drop/rise hitch
22”-24” requires 8” drop/rise hitch
25”-27” requires 10” drop/rise hitch
28”-30” requires 12” drop/rise hitch
31”-33” requires 14” drop/rise hitch
34”-36” requires 16” drop/rise hitch
I fall between two measurements. What should I order? Call us for help at
844-894-6448.
I tow heavy trailers (in excess of 8,000 pounds). Does this impact what hitch
I should order?
Please call us to discuss your exact measurements due to possible squatting
that may occur when your trailer is loaded.
My truck has helper air bags/air suspension. Does this impact which hitch I
need?
Please call us to discuss your measurements and what you are towing.
If you are unsure or have any questions, please contact us at
844-894-6448, and we will be happy to
help you select the correct hitch for your vehicle and towing needs!
Medium Duty
Bulletproof medium duty hitches
The Medium Duty hitch is an adjustable steel hitch designed for those looking to tow with their SUV, 1/2-ton truck or heavy-duty truck. Rated to 14,000 pounds, the Medium Duty hitch is precision CNC milled and drilled, and features a box steel shank, solid steel dual ball assembly and (2) hardened pins and R-clips to secure the dual ball to the hitch. The hitch and dual ball are finished in a durable, textured, black, powder coat. The Medium Duty hitch is offered in two shank sizes (2”and 2.5”) and can be used in a drop or rise position. This hitch is a great option for those wanting a safe towing experience without the weight of the solid steel Heavy Duty and Extreme Duty hitches.
Medium Duty 2” Drop/Rise Hitch
The Medium Duty 2” drop hitch provides 3 levels of adjustment. This hitch is made for trucks with a receiver height of 13”-15” (ground to bottom of receiver tube). Please NOTE: This hitch is a true 2” drop. The overall length of the hitch is 8”.
- Available in 2” shank
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 14,000 pounds
- Tongue weight: 2,000 pounds
SKU: MD202
Medium Duty 4” Drop/Rise Hitch
The Medium Duty 4” drop hitch provides 4 levels of adjustment. This hitch is made for trucks with a receiver height of 16”-18” (ground to bottom of receiver tube). Please NOTE: This hitch is a true 4” drop. The overall height of the hitch is 10”.
- Available in 2” & 2.5” shanks
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 14,000 pounds
- Tongue weight: 2,000 pounds
SKU: MD204
SKU: MD254
Medium Duty 6” Drop/Rise Hitch
The Medium Duty 6” drop hitch provides 5 levels of adjustment. This hitch is designed for trucks with a receiver height of 19”-21” (ground to bottom of receiver tube). Please NOTE: This hitch is a true 6” drop. The overall height of the hitch is 12”.
- Available in 2” & 2.5” shanks
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 14,000 pounds
- Tongue weight: 2,000 pounds
SKU: MD206
SKU: MD256
Heavy Duty
Bulletproof heavy duty hitches
The Heavy Duty hitch was designed to be a perfect match for 1500, 2500 and 3500 trucks. With a 22,000 pound weight rating, the Heavy Duty hitch allows you to maximize the towing capability of your vehicle. Built from solid steel with a wide range of accessories, this hitch is the perfect tool for towing all trailers. The Heavy Duty hitch is precision CNC milled and drilled, and features a solid steel shank, solid steel dual ball assembly and (2) hardened pins and R-clips to secure the dual ball to the hitch. The hitch and dual ball are finished in a durable, textured, black, powder coat.
Heavy Duty 4” Drop/Rise Hitch
The 4” drop hitch was designed for trucks at stock or leveled height. This hitch works best for trucks with a receiver height of 16”-18” (ground to bottom of receiver tube). Please NOTE: This hitch is a true 4” drop. The overall height of the hitch is 10”.
- Available in 2”, 2.5” & 3” shanks
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 22,000 pounds
- Tongue weight: 3,000 pounds
SKU: HD204
SKU: HD254
SKU: HD304
Heavy Duty 6” Drop/Rise Hitch
The Heavy Duty 6” drop hitch was designed for newer stock trucks and older trucks with oversized tires. This hitch works best for trucks with a receiver height of 19”-21” (ground to bottom of receiver tube). Please NOTE: This hitch is a true 6” drop. The overall length of the hitch is 12”.
- Available in 2”, 2.5” & 3” shanks
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 22,000 pounds
- Tongue weight: 3,000 pounds
SKU: HD206
SKU: HD256
SKU: HD306
Heavy Duty 8” Drop/Rise Hitch
If your truck is lifted 4” to 6” on 35” tires, this 8” drop hitch is a great choice to keep your trailer level and off the ground. This hitch works best for trucks with a receiver height of 22”-24” (ground to bottom of receiver tube). Please NOTE: This hitch is a true 8” drop. The overall height of the hitch is 14”.
- Available in 2”, 2.5” & 3” shanks
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 22,000 pounds
- Tongue weight: 3,000 pounds
SKU: HD208
SKU: HD258
SKU: HD308
Heavy Duty 10” Drop/Rise Hitch
Designed for trucks with 6” to 8” of lift and 37” tires. This hitch is made for trucks with a receiver height of 25”-27” (ground to bottom of receiver tube). Please NOTE: This hitch is a true 10” drop. The overall height of the hitch is 16”.
- Available in 2”, 2.5” & 3” shanks
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 22,000 pounds
- Tongue weight: 3,000 pounds
SKU: HD2010
SKU: HD2510
SKU: HD3010
Heavy Duty 12” Drop/Rise Hitch
Trucks with an 8” to 10” lift and 40” tires are perfect candidates for this hitch. The 12” drop/rise hitch works best for trucks with a receiver height of 28”- 30” (ground to bottom of receiver tube). Please NOTE: This hitch is a true 12” drop. The overall height of the hitch is 18”.
- Available in 2”, 2.5” & 3” shanks
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 22,000 pounds
- Tongue weight: 3,000 pounds
SKU: HD2012
SKU: HD2512
SKU: HD3012
Heavy Duty 14” Drop/Rise Hitch
For trucks with 12” of lift and 40” tires, the 14” drop hitch is unstoppable. This hitch is designed for trucks with a receiver height of 31”-33” (ground to bottom of receiver tube). Please NOTE: This hitch is a true 14” drop. The overall height of the hitch is 20”.
- Available in 2”, 2.5” & 3” shanks
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 22,000 pounds
- Tongue weight: 3,000 pounds
SKU: HD2014
SKU: HD2514
SKU: HD3014
Heavy Duty 16” Drop/Rise Hitch
This hitch was designed for trucks with 12” of lift or more and 40” tires or larger. The BulletProof 16” drop hitch works best for trucks with a receiver height of 34”-36” (ground to bottom of receiver tube). Please NOTE: This hitch is a true 16” drop. The overall height of the hitch is 22”.
- Available in 2”, 2.5” & 3” shanks
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 22,000 pounds
- Tongue weight: 3,000 pounds
SKU: HD2016
SKU: HD2516
SKU: HD3016
Extreme Duty
Bulletproof extreme duty hitches
For the ultimate in towing capability, BulletProof Hitches™ offers an Extreme Duty line of hitches. Rated up to an outstanding 36,000 pounds, these hitches are ideal for 3500, 4500, 5500 and semi trucks. Extreme Duty hitches are compatible with every BulletProof accessory and will exceed all of your needs. You’ll wonder why you don’t have one yet! The Extreme Duty hitch is precision CNC milled and drilled and features a solid steel shank, solid steel dual ball assembly and (2) hardened pins and R-clips to secure the dual ball to the hitch. The hitch and dual ball are finished in a durable, textured, black, powder coat.
Extreme duty 4” Drop/Rise Hitch
The Extreme Duty 4” drop/rise hitch is a perfect fit for vehicles at stock height. This hitch works best for trucks with a receiver height of 16” – 18” (ground to bottom of receiver tube). Please NOTE: This hitch is a true 4” drop. The overall height of the hitch is 10”.
- Available in 2”, 2.5” & 3” shanks
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 36,000 pounds
- Tongue weight: 6,000 pounds
SKU: ED204
SKU: ED254
SKU: ED304
Extreme duty 6” Drop/Rise Hitch
The 6” drop/rise hitch caters to those with a newer truck at stock height. This hitch works best for trucks with a receiver height of 19”-21” (ground to bottom of receiver tube). Please NOTE: This hitch is a true 6” drop. The overall height of the hitch is 12”.
- Available in 2”, 2.5” & 3” shanks
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 36,000 pounds
- Tongue weight: 6,000 pounds
SKU: ED206
SKU: ED256
SKU: ED306
Extreme duty 8” Drop/Rise Hitch
The 8” drop hitch was designed for trucks running a 6” lift and 35” tires. This hitch works best with a receiver height of 22”-24” (ground to bottom of receiver tube).
- Available in 2”, 2.5” & 3” shanks
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 36,000 pounds
- Tongue weight: 6,000 pounds
SKU: ED208
SKU: ED258
SKU: ED308
Extreme duty 10” Drop/Rise Hitch
The 10” drop hitch is made for trucks with a receiver height of 25”-27” (ground to bottom of receiver tube). Generally speaking, this applies to trucks with 8” of lift and 37” tires. Please NOTE: This hitch is a true 10” drop. The overall height of the hitch is 16”.
- Available in 2”, 2.5” & 3” shanks
- BulletProof dual ball: 2” & 2-5/16”
- Maximum capacity: 36,000 pounds
- Tongue weight: 6,000 pounds
SKU: ED2010
SKU: ED2510
SKU: ED3010
Extreme duty 12” Drop/Rise Hitch
The 12” Extreme Duty drop hitch is the largest and heaviest hitch around. This hitch works best for trucks with a receiver height of 28”-30” (ground to bottom of receiver tube). Please NOTE: This hitch is a true 12” drop. The overall height of the hitch is 18”.
- Available in 2”, 2.5” & 3” shanks
- BulletProof dual ball: 2-5/16” & 2”
- Maximum capacity: 36,000 pounds
- Tongue weight: 6,000 pounds
SKU: ED2012
SKU: ED2512
SKU: ED3012
f250 equipped with an extreme duty hitch
Offset Hitches
Medium Duty 4” & 6” Offset Hitch
The Medium Duty 4” & 6” Offset Hitch was designed for people who regularly tow a wide variety of trailers. This hitch can be used in either orientation. It’s great for those who tow tall trailers that may require the ball in the rise position and smaller trailers that require it in the drop position. You can leave this hitch locked in place and not worry about flipping it over every time you have a trailer with a different height requirement.
The Medium Duty Offset Hitch is available in 2” & 2.5” shank sizes. It offers up to 14,000 pounds towing capacity and 2,000 pounds tongue weight capacity with 6 easily adjustable ride heights.
Medium duty hitches are not compatible with the pintle attachment.
SKU: MD20OFFSET
SKU: MD25OFFSET
Extreme Duty 4” & 6” Offset Hitch
The Extreme Duty 4”& 6” Offset Hitch was designed for people who regularly tow a wide variety of trailers. This hitch can be used in either orientation. It’s great for those towing very tall trailers such as pintle equipment trailers which may require the ball in a rise position, and small utility trailers which may require the ball in a drop position. You can leave this hitch locked in place and not worry about flipping it over every time you have a trailer with a different height requirement.
It was also designed for most vehicles to allow the tailgate to fold down without touching the hitch. The 2.5” & 3” versions offer a 36,000 pounds towing capacity, while the 2” version offers a 30,000 pounds towing capacity. All versions offer a 6,000 pounds tongue weight capacity. Available in 2”, 2.5” & 3” shanks.
SKU: ED20OFFSET
SKU: ED25OFFSET
SKU: ED30OFFSET
Receiver Shackles
When you need to attach a rope, strap or chain to your truck, it’s important to find the strongest possible point on the vehicle. The Extreme Duty BulletProof Receiver Shackle solves that problem with a solid steel shank and a 1-1/4” shackle to attach the tether to your vehicle.
This shackle features four different pin holes so you can set the shackle where you need it. The design allows it to be used in both horizontal and vertical orientations, as well as in extended or recessed positions. This can be especially useful for trucks with aftermarket bumpers.
Our receiver shackle features the same durable, textured powder coat as our hitches and is rated at 36,000 pounds This accessory comes standard with one hardened pin and R-clip. BulletProof Extreme Duty Receiver Shackles are available in 2”, 2.5” and 3” shanks.
SKU: ED20SHACKLE
SKU: ED25SHACKLE
SKU: ED30SHACKLE
Accessories
5/8” BULLETPROOF LOCKING PIN
The BulletProof Locking Pin is made from stainless steel to provide maximum corrosion and rust protection. The length of the pin works with all 2”, 2.5”, & 3” hitch receivers. It can also be used to secure the dual ball or other BulletProof accessories into the hitch channel. Our locking pin features a 2” & 2.5” anti-rattle stabilization spacer to prevent side to side movement. This top-of-the-line locking pin has a universal fit. With 4” of usuable length, it is compatible with any vehicle and any hitch on the market. The BulletProof Locking Pin is rated to the max capacity of the hitch 14,000 – 36,000lbs and offers peace of mind when leaving your vehicle unattended. The thick, lockable barrel (end-piece) helps to prevent theft as well as provide a solid hold on your hitch.
Note: This locking pin is not compatible with the BulletProof Weight Distribution Adapter
Order the BulletProof Locking Pin in packs of one, two, or three depending on your security needs. If ordering a two or three pack, we will make sure that they are keyed alike, meaning you can use 1 set of keys on your locking pins for convenience.
SKU: BPLP
SKU: BPLP2 (Two pack of locking pins keyed alike)
SKU: BPLP3 (Three pack of locking pins keyed alike)
BulletProof 5/8” Corrosion resistant Pins – PAIR
The BulletProof Corrosion Resistant Pins were designed with strength, durability and utility in mind. In addition to the zinc plating, the BulletProof 5/8” pin features an electro-less nickel undercoat for unsurpassed corrosion resistance. The pins are also heat-treated for increased strength and wear resistance. They’re sold as a pair, including R-clips, and are rated to the full capacity of any BulletProof Hitch.
SKU: CRP
Bulletproof coupler lock
The BulletProof Extreme Duty Coupler Lock protects against trailer theft. With a 1” hardened solid steel bar, pick-resistant lock and cut resistant design this coupler lock is the ultimate in trailer protection.
Our universal design is compatible with all 1-7/8”, 2” and 2-5/16” couplers. Locking mechanism is protected by a heavy-duty rubber cap and comes with 2 key
SKU: EDCOUPLER
bulletproof locking combos
Order the BulletProof Coupler Lock with the BulletProof Locking Pin as a combo and get them both keyed the same! If larger quantities are required, please contact us!
- 1 Coupler Lock + 1 Locking Pin
- 1 Coupler Lock + 2 Locking Pins
- 1 Coupler Lock + 3 Locking Pins
- 2 Coupler Locks + 1 Locking Pin
- 2 Coupler Locks + 2 Locking Pins
- 2 Coupler Locks + 3 Locking Pins
- 3 Coupler Locks + 1 Locking Pin
- 3 Coupler Locks + 2 Locking Pins
- 3 Coupler Locks + 3 Locking Pins
Heavy/extreme duty replacement dual ball
Our Heavy/Extreme Duty Replacement Dual Ball features the same solid steel construction as our high-quality hitches, coated with a durable black textured powder coat. This replacement dual ball pairs with any Heavy or Extreme Duty Bulletproof Hitch and includes a 2” ball on one side and a 2-5/16” dual ball on the other. The dual ball comes with 2 heat-treated, corrosion resistant pins and R-clips.
Dual Ball Weight Ratings
Heavy/Extreme Duty 2” — 12,000 pounds
Heavy/Extreme Duty 2-5/16” — 36,000 pounds
SKU: REPLACEMENTBALL
Medium duty replacement dual ball
Our Medium Duty Replacement Dual Ball features the same solid steel construction as our high-quality hitches, coated with a durable black textured powder coat. This replacement dual ball pairs with any Medium Duty BulletProof Hitch and includes a 2” ball on one side and a 2-5/16” dual ball on the other. The dual ball will include 2 standard pins and R-clips.
Dual Ball Weight Ratings
Medium Duty 2” — 10,000 pounds
Medium Duty 2-5/16” — 14,000 pounds
SKU: MDDUALBALL
Bulletproof 1-7/8” single ball mount
Our BulletProof 1-7/8” Single Ball Mount is compatible with all of our hitches and features the same quality solid steel construction, coated with our durable, black textured powder coat. Our Single Ball Mount is great for smaller trailers, like jet ski trailers. With a weight rating of 6,000 pounds for a 1-7/8” ball, the Single Ball Mount comes with 2 heat-treated, corrosion resistant pins and R-clips
SKU: 178SINGLE
Bulletproof PINTLE ATTACHMENT
This attachment converts our dual ball setup into a pintle hitch. Lower the loop over the top of the 2-5/16” ball, drop our pintle attachment into the hitch channel above the loop, insert the supplied hardened pin, and you are ready to hit the road! Rated to 36,000 pounds when paired with our Extreme Duty hitches. NOTE: Medium Duty hitches are NOT COMPATIBLE with our Pintle Attachment. Only Heavy Duty and Extreme Duty hitches are compatible with the Pintle Attachment.
SKU: PINTLEATTACHMENT
BULLETPROOF 5/8” CHANNEL SHACKLES FOR SAFETY CHAINS – PAIR
Safety chains connect a trailer to the hitch receiver and work as a backup in case the coupler detaches from the ball. Attaching safety chains to a hitch receiver when using a drop hitch can be very difficult or even impossible under certain circumstances. With this pair of 5/8” shackles, you can attach your safety chains to the channel on any BulletProof Hitch. This allows you to get the correct safety chain length without the need for chain extenders. Our Channel Shackles are rated up to 6,500 pounds each.
SKU: SMALLSHACKLE
BULLETPROOF HEAVY DUTY 2-TANG CLEVIS WITH 1” PIN
The Heavy Duty 2-Tang Clevis Attachment features a 1” pin and a 2-3/8”
opening, allowing a connection to a Lunette Ring or a farm-style drawbar.
It will enable you to tow with farming equipment, pintle trailers and even
chains and straps! This attachment is built from solid steel and coated with
our signature black textured powder coat, just like the rest of our hitches
and accessories. This product includes a 1” zinc-plated pin with a large
handle and three of our standard 5/8” hardened pins. Compatible with all
BulletProof Hitches™. Rated to 20,000 pounds
SKU: CLEVIS
BULLETPROOF MEDIUM DUTY 2-TANG CLEVIS WITH 1” PIN
The Medium Duty 2-Tang Clevis Attachment features a 1” pin and a 2-1/4” opening, allowing a connection to a Lunette Ring or a farm-style drawbar. It will enable you to tow with farming equipment, pintle trailers and even chains and straps! This attachment is built from solid steel and coated with our signature black textured powder coat, just like the rest of our hitches and accessories. This product includes a 1” zinc-plated pin with a large handle and two of our standard 5/8” hardened pins. Compatible with all BulletProof Hitches™. Rated to 14,000 pounds.
SKU: MD2TANG
BULLETPROOF HEAVY DUTY SINGLE TANG CLEVIS WITH 1” PIN
The Heavy Duty Single Tang Clevis Attachment features a 1” pin and a single tang, this allows a connection to a farm-style drawbar and enables you to tow farming equipment! This attachment is built from solid steel and coated with our signature black textured powder coat, just like the rest of our hitches and accessories. This product includes a 1” zinc plated pin with a large handle and two of our standard 5/8” hardened pins. Compatible with all BulletProof Hitches™. Rated to 22,000 lbs
SKU: SINGLETANG
FRAME-MOUNTED HITCH STABILIZER BARS
Do you want to set your truck apart from the rest? The BulletProof Frame Mounted Hitch Stabilizer Bars definitely make a statement that your truck is ready to pull anything! This kit includes 2 black texture powder coated, heavy duty steel bars that connect the bottom of the hitch to the frame rails of the truck, eliminating all leverage on the truck’s hitch receiver. All hardware, brackets and bolts needed for installation are included in the kit. The bars are extendable from 29”-45” inches and can be tightened, eliminating all slop/wobble from the hitch receiver. The Frame Mounted Hitch Stabilizer Bars will fit all existing BulletProof Hitches™ with 8” of drop or more.
BulletProof Frame-Mounted Kit Includes:
1x black texture powder coated 1/2” plate hitch bracket
2x black texture powder coated 1/2” plate frame brackets
2x black texture powder coated heavy duty bars 1-3/4” diameter that extends
from 29” to 39”
1x 5/8”x 3” bolt & nylon lock nut
2x 3/4” heat treated pins with R-clips
2x 3/4”x 3” bolts & nylon lock jam nuts
4x 1/2”x 2” bolts & nylon lock nuts
4x 1/2” SAE washers
4x 3/4”x 3/8” spacers
SKU: STABILIZERBARS
Installation:
In some cases, fabrication is required to mount the frame brackets to the hitch receiver or the frame. This depends on the design of your factory hitch receiver and the location of the spare wheel. Some drilling is required! You’ll need one 5/8” hole in the hitch gusset and four 1/2” holes in the frame. This kit does not include drill bits.
Bulletproof sway control
To equip your vehicle with our full Sway Control System, a mounting point for the sway control bar must be attached to the hitch. With the BulletProof Sway Control Ball Mount, you can mount a sway control system between your hitch and your trailer. This is most useful in reducing sway on large, heavy loads. The Sway Control Ball Mount comes with a 2” and 2-5/16” combination ball and two side plates for mounting the sway control ball, giving you the option of attaching the sway control system to either side of the trailer. Typically, this setup would only have one side plate for mounting, which may not work for some applications. Having two ball sizes and mounting plates means you can easily switch trailers and even change which side you want to mount the sway control system on. This is especially important for trailers with designs that interfere with the articulation of the sway control system.
BULLETPROOF MEDIUM DUTY SWAY CONTROL BALL MOUNT
The Medium Duty Sway Ball Mount is rated up to 14,000 pounds and can be used on our Medium Duty hitches. If you are ordering this ball mount with a Medium Duty BulletProof Hitch, you can replace the standard dual ball that comes with our hitches for this Sway Control Ball Mount for an additional $49.95. The entire ball mount comes coated with our durable, black textured powder coat and is covered by a lifetime warranty! Weight Rating: 10,000 pounds on the 2” ball and 14,000 pounds on the 2-5/16” ball (w/ Medium Duty Hitch). NOTE: Sway Control System NOT included.
SKU: MDSWAYCONTROLBALL
BULLETPROOF HEAVY/EXTREME DUTY SWAY CONTROL BALL MOUNT
The Heavy/Extreme Duty Sway Ball Mount is compatible with any of our Heavy or Extreme Duty hitches. If you are ordering this ball mount with a Heavy or Extreme Duty BulletProof Hitch, you can replace the standard dual ball that comes with our hitches for this Sway Control Ball Mount for an additional $74.95. The entire ball mount comes coated with our durable, black textured powder coat and is covered by a lifetime warranty! Heavy/Extreme Duty Weight Rating: 12,000 pounds on the 2” ball and 36,000 pounds on the 2-5/16” ball (w/ Extreme Duty Hitch). NOTE: Sway Control System NOT included.
SKU: SWAYCONTROLBALL
BulletProof Sway Control system
When towing large trailers, it is possible to experience trailer sway from wind, passing vehicles and uneven road surfaces. To prevent your trailer from swaying, BulletProof Hitches™ offers a Sway Control System that connects the sway control ball mount of the hitch to the front of the trailer. This system stiffens the connection between the truck and trailer, keeping it straight and in line with the towing vehicle. The Sway Control System makes it safer to tow large trailers like travel trailers or toy haulers.
BulletProof Sway Control System Includes:
1x Black texture powder coated friction bar
1x 1-1/4” Trailer-mounted ball
1x 1-1/4” Hitch-mounted ball with lock washer and nut
6x Metal lag screws
2x Retaining clips
NOTE: Sway Control System is not compatible with trailers equipped with surge brakes. This system MUST be used with a BulletProof Hitches™ Sway Control Dual Ball.
SKU: SWAYCONTROL
Heavy duty weight distribution adapter
This solid steel adapter allows you to attach a weight distribution system to a BulletProof Hitch. After modifying your vehicle’s suspension and/ or adding larger tires, you may need a hitch with a longer drop. This accessory is compatible with all BulletProof Hitches and MOST weight distribution systems. The adapter is 2” wide and the holes are 3/4” in diameter and spaced 1-1/4” on center
Rated to 6,500 pounds trailer weight and 1,500 lbs tongue weight when used with our Medium Duty Hitch. Rated to 22,000 pounds trailer weight and 3,000 lbs tongue weight when used with our Heavy Duty Hitch.
NOTE: One BulletProof Locking Pin is compatible with the Heavy Duty Weight Distribution Adapter. Please note locking pin MUST be used in either center hole ONLY
Does NOT include a weight distribution ball with bars as shown in some of the photos. The adapter is sold as 1 individual piece to work with existing weight distribution systems.
SKU: HDWDA
BulletProof Road Shield Mud Flap System
The BulletProof Road Shield Mud Flap system is the ultimate protection for your trailer and its cargo from damage caused by rocks and road debris. Our patented, adjustable sleeve system works on all 2”, 2.5” and 3” receivers, which makes it impossible to order the wrong product!
The 24” x 24” reinforced rubber flaps are 3/8” thick for extended durability. The BulletProof Road Shield Mud Flap system is built with the highest quality materials and components, providing years of trouble-free use. The system is made from heat-treated forged aluminum and stainless steel for light-weight, corrosion resistance and strength. Our signature textured black powder coat complements the look of your vehicle. With an adjustable width of 73.5” out to 97.5”, this system easily fits compact trucks all the way up to large duallys with oversized tires.
Installs with no drilling, in less than 30 minutes and can be easily removed in less than 5 minutes! The heavy-duty flaps can be cut down to accommodate small or lowered vehicles. This system is compatible with most trailer hitches and all BulletProof Hitches!
If you are looking for the highest quality and most reliable way to protect your trailer, then the BulletProof Road Shield Mud Flap system is the perfect solution for your vehicle!
SKU: BPMUDFLAP
Extreme duty ADJUSTABLE Shackle attachment
If you want the strongest shackle mount you can buy, this is for you! This adjustable shackle mount is designed to be durable, safe, adjustable and easy to use. Just like our hitches, we use solid-steel construction and a durable, textured powder coat to ensure maximum strength and durability. Rigorously tested and backed by a lifetime warranty. Rated to 36,000 lbs.
SKU: EDSA
Bulletproof hitches™ loop attachment
The lunette ring/loop is compatible with any of our hitches. It is fully adjustable by removing the two hardened pins, moving the loop up or down in the channel and reinserting the pins. This attachment has a 24,000 lb. rating. It can be used as a coupler for your trailer or to attach ropes, chains and more for recovery or demolition.
SKU: LOOP
Bulletproof 2” receiver attachment
The BulletProof 2” Receiver Attachment allows you to attach 2” receiver accessories such as bike racks and cargo carriers to your BulletProof Hitch.This attachment can also be used for flat tow applications. It’s rated to 5,000 pounds gross trailer weight and 500 pounds tongue weight capacity. This attachment comes coated in our standard textured black powder coat and includes three heat-treated/zinc-plated 5/8” pins and R-clips.
NOTE: Not to be used with hitch extenders.
SKU: RECEIVERATTACHMENT
Bulletproof HITCHES FLAT PLATE ATTACHMENT
The BulletProof Hitches Flat Plate Attachment is made of heavy duty, solid steel. This 12” x 10” plate can be used to mount a winch, a vice, as a table, or even as a place to sit! It is durable enough to be drilled through for mounting winches and vices and features our signature black textured powder coat. Three hardened pins and R-clips included for mounting the flat plate attachment to your hitch. Rated up to 22,000 pounds.
Bulletproof anti-rattle clamp
BulletProof Hitches™ are manufactured to a very tight tolerance of +/- .010 of an inch. Unfortunately, hitch receivers cannot always live up to these standards. Tolerances can vary as much as .100 of an inch and could cause some unwanted movement or rattle in the hitch.
To solve this, we have developed the BulletProof Anti-Rattle Clamp. It allows you to tighten the hitch to the receiver and eliminate all movement. Our Anti- Rattle clamp is made from 1/2” thick pressed break steel and features our signature black, textured powder coat.
Installation is simple – just slide the hitch through the clamp, insert the hitch into the receiver, tighten the bolt and then tighten the jam nut with a wrench to eliminate movement inside the receiver.
SKU: 2ANTIRATTLE
SKU: 25ANTIRATTLE
SKU: 30ANTIRATTLE
Bulletproof hitch Step Attachment
Getting into the bed of your truck can be a chore, whether your vehicle is stock or lifted to the sky. With our step attachment, reaching into the bed of your truck or roof of your SUV is much safer than trying to stand on a greasy ball, wet bumper or tire. With a small profile, the step only occupies two of the pinholes in the channel of the hitch. With the BulletProof Step Attachment, you won’t have to climb up your tire to get to your impact driver ever again!
The step attachment is constructed with heavy-duty steel and features our signature black textured powder coat for extreme durability. Two hardened pins and R-clips are included for mounting the step to your hitch.
SKU: STEP
Bulletproof FLAG HOLDER ATTACHMENT
he BulletProof Flag Holder Attachment allows you to use your BulletProof Hitch to fly your flag anytime, anywhere, without having to sacrifice the use of your hitch. This attachment works with a flagpole up to 1.5” in diameter, and two thumbscrews tighten the pole in place. This attachment comes coated in our signature textured black powder coat and includes two heat-treated/zinc-plated 5/8” pins and R-clips. NOTE: Flag pole not included.
SKU: FLAGHOLDER
BULLETPROOF SAFETY CHAINS – HEAVY DUTY
The most important and most overlooked connection when towing is the safety chains. Factory length safety chains are often not long enough to connect your trailer to your hitch receiver when utilizing a drop hitch. We offer two solutions: Use the BulletProof Channel Shackles to safely connect the chains to the hitch, or replace the safety chains with our longer Bulletproof Safety Chains. Our safety chains will allow you to connect the trailer to your vehicle’s hitch receiver regardless of what size drop you have. NOTE: Sold as a pair of 2 chains. Heavy Duty: Chains are 5/16” thick and 44” long with a 22,000 pounds combined capacity
SKU: HDCHAINS
BULLETPROOF SAFETY CHAINS – EXTREME DUTY
The most important and most overlooked connection when towing is the safety chain. Factory length safety chains are often not long enough to connect your trailer to your hitch receiver when utilizing a drop hitch. We offer two solutions: use the BulletProof Channel Shackles to safely connect the chains to the hitch, or replace the safety chains with our longer Bulletproof Safety Chains. Our safety chains will allow you to connect the trailer to your vehicle’s hitch receiver regardless of what size drop you have.NOTE: Sold as a pair of 2 chains. Extreme Duty: Chains are 1/2” thick and 42” long with a 46,000 pounds combined capacity.
BULLETPROOF ACCESSORY CLAMP
The BulletProof Accessory Clamp was designed to make BulletProof accessories solid in your hitch. The clamp also helps to prevent theft by requiring the supplied offset wrench to remove your accessory.
Installation is simple – drop the clamp behind the dual ball or accessory, tighten the bolt by hand, finish with the supplied offset wrench and all movement is eliminated!
The BulletProof Dual Accessory Clamp is compatible with these BulletProof accessories: Extreme Duty Shackle Attachment, Single Tang, Clevis, Step Attachment, Flag Holder, Flat Plate, Receiver Attachment, Medium Duty Dual Ball, Medium Duty Sway Control Dual Ball, Heavy Duty Dual Ball, Heavy Duty Sway Control Dual Ball. *Not Compatible with our Pintle Attachment, Loop, Medium Duty Clevis or Heavy Duty Clevis.
SKU: ACCESSORY CLAMP
BULLETPROOF HITCHES FRAME MOUNTED HARDWARE KIT
Have you purchased a new truck and need to remount your stabilizer bars? Or have you lost a piece of the hardware for your BulletProof Frame Mounted Hitch Stabilizer Bars? If so, the BulletProof Frame-Mounted Hardware Kit is for you!
SKU: FRAMEHARDWARE
BULLETPROOF 1-1/4” trailer-mounted sway control bal
Mount this Sway Control Ball plate on the front of your trailer with the six tapping screws included in order to attach our Sway Control System. This ball will allow you to attach the Sway Control System by R-clip.
SKU: SWAYCONTROLBRACKETS
BULLETPROOF 1-1/4” hitch-mounted sway control ball
Attaching a Sway Control System from your BulletProof Hitch to your trailer requires the proper mounting points and a 1-1/4” ball bolted to either the left or right side of the BulletProof Sway Control Ball Mount and secured with a lock washer and nut to prevent it from coming loose.
SKU: SWAYCONTROLBALL114
BULLETPROOF REPLACEMENT STICKER
Replacement stickers for all hitches, dual balls, and pintle attachments. If you are unsure as to which sticker you are needing please call us at 941-251-8110 for assistance.
SKU: BPRS
BULLETPROOF ANTI-FRICTION GREASE
BulletProof Anti-Friction Grease is a perfect complement to the BulletProof Hitch. Applying a thin layer to each ball will help eliminate friction and prevent corrosion. Our anti-friction grease can also lubricate your hitch coupler to make locking and unlocking easier.
SKU: BPHGREASE
BULLETPROOF HITCHES POWDER COAT TOUCH UP
Want to keep your BulletProof Hitch looking show ready at all times, even if you tow heavy loads every day? The BulletProof Powder Coat Touch Up is just what you need! This touch up was custom made for our signature black textured powder coat and matches our hitches perfectly. Before using, you will want to wipe away any dirt or debris. A light spray is ideal. If one coat is not enough, another light coat may be needed.
SKU: TOUCHUP
FOLLOW US
@bulletproofhitches / #bulletproofhitches
Thank you for choosing BulletProof Hitches™ to be a part of your setup! We are always featuring our customer’s builds and tow rigs. Feel free to send us your picturesor be sure to tag us in your posts! All submissions are automatically entered to win FREE BulletProof Hitches™ swag! Send your pictures to marketing@bulletproofhitches.com or use the QR code below to send your pictures via Instagram Messenger!
Apparel
VISIT OUR WEBSITE FOR A FULL LINE UP OF APPAREL!
BulletProof Hitches™ offers short sleeve and long sleeve performance tees that
are perfect for any temperature!
The BulletProof Hitches™ caps are all adjustable Richardson hats with
breathable mesh backs.Want to give the gift of a BulletProof Hitch but not
100% sure what to buy? The BulletProof Hitches™ gift card makes the perfect
gift! We love to see our valued customers rocking our brand name. Please be
sure to tag us in your posts! #bulletproofhitches / @bulletproofhitches
Customer Support
Use this QR code to visit The bulletproof hitches™ ig page!
Use this QR code to VIEW More BULLETPROOF hitches™ swag!
BULLETPROOF HITCHES, LLC
HEADQUARTERS AND SHOWROOM LOCATED AT
3145 LAKEWOOD RANCH BLVD, SUITE 106
BRADENTON, FL 34211
844-894-6448
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>