MECPOW X3 Pro Laser Engraver Machine User Manual
- June 17, 2024
- MECPOW
Table of Contents
MECPOW X3 Pro Laser Engraver Machine
Preface
Dear Customer,
- Thank you for purchasing our laser engraving machine.
- This device is a high-tech product that integrates light, machinery, and electricity.
- For you to use and maintain the equipment better, please read the user manual carefully and follow the steps in the manual.
Disclaimer
- Any losses caused by improper use or failure to follow the steps in the user manual will be borne by the individual.
- The final interpretation of the user manual belongs to our company, and we reserve the right to modify any information, data, technical details, etc. in the manual.
Security Statement
Safety Precautions
- Laser processing can be risky, and users should carefully consider whether the object to be processed is suitable for laser work.
- The object being processed and emissions must comply with local laws and regulations.
This machine uses a Class IV laser (high-power laser radiation), which may cause the following situations:
- Ignition of surrounding flammable materials;
- During laser processing, other radiation and toxic and harmful gases may be produced, depending on the object being processed;
- Direct exposure to laser radiation can cause harm to the human body. There must be fire-fighting equipment in the workplace, and flammable and explosive materials must not be stacked around the workbench or machine. Good ventilation must also be maintained.
- The environment in which the machine is located should be dry, free from pollution, vibration, strong electricity, strong magnetism and other interference. The working ambient temperature should be 5-30°C, and the working ambient humidity should be 35-65%RH.
- The working voltage of the machine is AC100-240V.
- During the operation of the machine, it must be monitored throughout. Before leaving, all power must be cut off to prevent any unforeseen issues. If an abnormal situation occurs, please immediately cut off the power and deal with it!
- It is strictly prohibited to place any reflective or diffuse objects in the machine that are not relevant to its operation to prevent laser reflection on the human body or flammable materials.
- The machine should be kept away from electrical equipment sensitive to electromagnetic interference, which may cause electromagnetic interference it.
- It is strictly forbidden for non-professionals to disassemble the laser engraver as there may be dangers such as high voltage inside the machine.
Warning
- The laser engraving machine can produce laser light. It is strictly prohibited to place any living organisms under the laser emission (the port is marked with a yellow warning sign).
- Photosensitive patients are prohibited from using or getting close to the laser engraver.
- When using the laser engraving machine, the operator and anyone near the machine must wear laser safety glasses. Do not operate the laser machine without laser goggles. Our machine comes with a pair of laser safety glasses. If you want to purchase additional goggles, the goggles should offer wavelength protection between 400-445m (+-5m), have an outer diameter of +5, and meet a minimum L5 level.
- When the laser engraving machine is in operation, the user must pay close attention and not leave it unattended to avoid ignition of the engraved material. Place the machine in a fireproof area and ensure good ventilation. It is recommended to have a fire extinguisher nearby in case of emergencies.
- Make sure there are no flammable materials near the laser engraving machine. We recommend placing a honeycomb working table under the machine.
- When operating the laser engraver, ensure that there is enough space around it. Engraving certain materials may produce smoke, which should be vented out using a specialized exhaust system.
- Do not touch the laser beam or the object being processed while the machine is in operation, as this could cause serious injury or beam reflection. Additionally, avoid touching the radiator as it may be hot due to the laser engraving machine working or just recently stopping.
- Children or teenagers (especially those under 14 years old) are not allowed to use the laser engraving machine alone and should be supervised by an adult at all times.
- The operating temperature of the machine is 5°F-86°F (-15°C-30°C).
- When laser engraving, there is a risk of fire. When the laser engraving machine is in use, it must be supervised by a skilled operator who can use a fire extinguisher to handle any accidents that may occur.
- Our laser engraving machine is equipped with a built-in flame sensor to maximize the safety of our equipment. But please note that no written or implied warranty is made regarding the availability or functionality of the flame sensor.
Diagram
- Rear X-Axis
- Left Y-Axis with Markings
- Right Y-Axis
- X-Axis Assembly
- Laser Module
- Front X-Axis with Markings
- Control Box
- DC Port
- USB Port
- MicroSD Port
- Alarm
- Emergency Stop
- Power Switch
- Reset Button
- Security Lock
- Flame Sensor Switch
- Flame Sensor
Specifications
Package List
Assembly Guide
- Step 1: Connect the front X-axis and Y-axes
- Step 2: Install the X-axis assembly Slide the X-axis assembly into the Y-axes in the direction shown.
- Step 3: Install the rear X-axis and rear stands
- Step 4: Install the control box and front stand
- Step 5: Connect the limit switch on the Y-axis
- Step 6: Install and tighten the belts
- Slide the belts through the wheels in the direction shown. Please note that the gears of the belt should face down.
- Loosen the M5*8 screws with gaskets.
- Slide the belts through the holes above the M5*8 screws.
- Drag the belts hard and tighten the M5*8 screws firmly to fix the belts.
- Step 7: Install the laser module
- Slide the laser module into the sliding plate.
- Tighten the manual screw to secure the laser module.
- Plug the cable into the laser module.
- Note: It is recommended to power off the machine for 10 minutes after 4 hours of engraving or 1 hour of cutting.
- Step 8: Focusing
- Place the focusing screen on the object.
- Move the laser head above the focusing screen.
- Hold the laser module with one hand and loosen the manual screw slightly with the other hand to slide the laser head down slightly till it touches the focusing screen.
- Tighten the manual screw and remove the focusing screen.
- Step 9: Power up the machine
- Connect the power adapter.
- Connect the machine to your computer via the USB cable.
- Insert the key and turn it clockwise till it is aligned with the green spot.
- Turn the emergency stop clockwise.
- Press the power switch and check the indicator light on the top of the laser module. Please note that the laser head is ready to work when the light is on. If the light is off, please reconnect the laser cable or the power adapter.
Functions & Operations
Driver
- Download Methods
- Download the driver from the link below. https://mecpow.com/pages/driver-files.
- Contact customer service to get the file of the driver.
- Note:
- For Windows users, if you’re using a system below Win 10, you’ll need to install the driver manually. If you’re using the Win 10 system or above, there is no need to install the driver.
- The driver for Mac users supports OS X 10.9 to OS X 10.15 and OS X 11.0 (Big Sur) and above.
- The driver for Linux users supports 32-bit and 64-bit systems.
- Please turn on the machine and connect it to your computer via the USB cable before starting the driver!
Installation
For Windows Users:
- Open the downloaded driver.
- Click “INSTALL”.
- Click “OK” when the driver is installed successfully.
For Mac Users:
- Open the instructions.
- Open the downloaded driver and follow the instructions to install it.
For Linux Users:
- Open the file – README.
- Open the file – driver, and follow the “README” to install it
Software
LaserGRBL: It’s free open-source software that supports Windows computers. Download it from: http://lasergrbl.com/download/.
- Install it.
- Open the software. Select “COM3” and click “Connect”.
Click “Open File” to select the engraving file.- Select the engraving mode and click “Next”.
- Select the operating parameters for laser engraving or cutting. (M3 is for constant power carving, and M4 is for variable power. Please check section 10 for recommended operating parameters for engraving or cutting different materials.)
- Click “Framing” to preview the engraving range and adjust the engraving position.
- Click “Run Program” to start engraving
LightBurn
It’s a paid professional software that supports MAC, Linux and Windows
computers. Download it from: https://lightburnsoftware.com/pages/trial-
version-try-before-you-buy.
- Install it.
- Open the software and click “Find My Laser”.
- Select your device and click “Add Device”.
- Name your device and enter the X-axis and
- Y-axis lengths, then click “Next”.
- Name: Mecpow X3
- X-Axis Length: 400mm
- Y-Axis Length: 410mm
- Select “Front Left” as the origin of your laser and click “Next”.
- Click “Finish”.
- Select Mecpow X3 and click “OK”.
- Click “Edit” – “Settings” and set the unit to “mm/min”, then click “OK”.
Select “Current Position” in the “Start From” section, and then select the circle in the lower left corner in the “Job Origin” section.- Click “File” – “Import” to import the engraving file.
- You can modify the engraving size on the top of the interface after importing the file.
- Select the engraving mode and set the operating parameters for laser engraving or cutting. (Recommended operating parameters for engraving or cutting different materials are listed in the next section.).
- Click “Frame” to preview the engraving range and adjust the engraving position, then click “Start” to start engraving.
Recommended Operating Parameters
Troubleshooting
- The machine doesn’t respond when powered on.
- A. Check if the machine is properly plugged into the socket and turned on.
- The machine fails to connect to the computer.
- A. Check if the USB cable is properly connected to both the computer and the machine.
- B. Install the driver as instructed, and make sure the computer recognizes the device as a serial port.
- C. Disconnect the USB cable and power supply, wait for 5 seconds, and then reconnect.
- The engraving is too light or non-existent.
- A. Make sure the machine is accurately focused according to the manual.
- B. Adjust the engraving speed. If it engraves too fast, it may not have enough time to burn the object.
- C. The image is too shallow. Imported images need to be clear, with fine lines, and not too light in colour, as this will directly affect the engraving effect.
- D. Ensure the object being engraved is placed flat and parallel to the machine to avoid focusing issues.
- The offline engraving process stops unexpectedly.
- A. This may be due to incomplete image downloads during machine connection. Try downloading the image again.
Compliance Statement
This product complies with the standards of the European Community. This product complies with the Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) EU rules restricting the use of hazardous substances in electrical and electronic equipment to protect the environment and public health. This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The laser warning sign is used to alert users and visitors if there is a risk of being exposed to a naked laser beam. Exposure to certain lasers can cause eye or optic damage and skin burns. This symbol indicates that the product is capable of being recycled.
CONTACT
- CHENGDU XINHONGJIN TECHNOLOGY CO., LTD.
- No. 26, 1/F, Building 3, No. 68, Haichang Road, Huayang Street,
- Tianfu New District, Chengdu City, Sichuan, China
- www.mecpow.com.
- support@mecpow.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>