bestplay 801622 Chicago Safe Basketball Stander Instruction Manual

bestplay 801622 Chicago Safe Basketball Stander

Product Specifications

• Brand: Bestplay A/S
• Model: Basketballstander PRO/PRO safe
• Country of Origin: Denmark
• Phone Number: +45 70 22 72 92

Product Usage Instructions

Safety Guidelines

• Read all instructions and complete assembly before using.
• Inspect the stand before each use. Ensure all parts are securely attached and replace any worn or missing parts.
• Avoid letting children climb on the stand to prevent tipping over. Adult supervision is required at all times. Secure the stand in windy conditions to prevent tipping.
• Avoid contact with electrical equipment as the metal frame can conduct electricity.

FAQ

• Q: Can the basketball stand be left outdoors?
• A: Yes, the basketball stand can be used outdoors, but ensure it is secured properly and checked regularly for maintenance.
• Q: How much sand should be used to fill the sandbase?
• A: Fill the sandbase with sand to ensure stability.
• Q: Can the basketball stand be disassembled for storage?
• A: Yes, the basketball stand can be disassembled for storage when not in use.

Safety warning

• Read all instructions and complete all assembly before using.
• When properly assembled and used as intended, this basketball stand is designed to provide many hours of training and playing enjoyment.
• Inspect the basketball stand before every use. Make sure all parts are correctly and securely positioned and attached. Tighten any loose parts. Replace any worn, defective, or missing parts.
• Never let children climb on the basketball stand as this can result in the basketball stand tipping over causing serious injuries to the child.
• Adult supervision is necessary at all times when the basketball stand is used by children.
• WARNING! The basketball stand can tip over in windy weather. Make sure to fasten it or move it to a secure location if the weather is turning windy/stormy.
• The metal frame of the basketball stand can conduct electricity. Lights, extension cords, and all such electrical equipment must never be allowed to come in contact with the basketball stand.

Assembly

• Clearance from all nearby objects is essential. Place the basketball stand away from walls, structures and fences. Maintain a clear space on all sides of the basketball stand.
• Adequate overhead clearance is essential. Provide clearance for wires, tree limbs, and other possible obstacles.
• Never set up the basketball stand in heavy rain, wind or storm conditions, especially storms.
• When moving the assembled basketball stand have a minimum of two people to lift the basketball stand off the ground with even weight distribution.
• Place the basketball stand on an even surface before use.
• Secure the basketball stand against unauthorized and unsupervised use.

Maintenance

Inspect the basketball stand before each use and replace any torn, defective, or missing parts.
The following conditions could present potential hazards:

1. Missing, wrongly positioned, or insecurely attached pipes or baskets.
2. Punctures, frays, tears, or holes are worn in the basketball stand.
3. A bent or broken pipe or support system.
4. Sharp points sticking out of the pipe or basket.
5. Loosened or missing hardware.

Before assembling

1. It is recommended to have at least two persons to assemble this product.
2. Do not leave the basketball stand without support before the sand base has been filled with sand.
3. Do not use water, as this can leak. In cold weather water may freeze and damage the base.
4. This basketball stand can not be used for dunks.

Packing list

Assembly Required

Installation Instructions

Assembly

Step 1

1. Insert wheel axle (I) through the two wheels (H) and the lower main pipe (D) on the sandbase (C).
2. Fasten the two support bars (G) onto the lower main pipe (D) with two bolts (2) and two washers (W-2).
3. Now fasten the other end of the support bars (G) onto the sandbase (C) using two bolts (3), four washers (W-2) and two nuts (V-2).

Step 2

1. Attached the middle main pipe (E) to the lower main pipe (D) straightly.
2. Secure the U-bracket (K) on the middle main pipe (E) at the joint by two bolts (9) through four washers (W-2) and two nuts (V-2).

Step 3

Please make sure the bracket is in correct position before tightening it with the backboard.

1. Attach the basket (B) and V-Bracket (J) on the backboard (A) by using two spring sets (N) and (X), two bolts (4), two bolts (5) through six washers (W-2) and four nuts (V-2).
2. Open the V-Bracket (J) to align at the joint of the backboard (A), and secure it with two bolts (2) and two washers (W-2).

Step 4

1. Fasten the net (B-2) onto the baskets (B-1) hooks. Find loops at the top edge of the net (B-2). Hook one loop over and around the centre of the basket hook (B-1). Pull the loop down to secure loop within the basket hook. Repeat for remaining net loops. Make sure the mats (R) and washers (W-4) are in the right position as the figures show to avoid unnecessary troubles.

1. Attach the upper arms (P) on the V-Bracket (J), using a bolt (6) through two washers (W-4), two plastic mats (R) and a bracket tube.
2. Attach the lower arms (O) on the V-Bracket (J) in the same way above.

Step 5

1. Attach the upper arms (P) and lower arms (O) on the top main pipe (F) by using two bolts (6) through four washers (W-4), four plastic mats (R) and two nuts ( V-4 ).
2. Attach the height adjuster (Q) on the lower arms (O) by using a bolt (6) through two washers (W-4), two plastic mats (T) and a nut (V-4).
3. Cap the (M) and (L) onto the top main pipe and the height adjuster.

Step 6

Adjust the height adjuster (Q) to a suitable height to connect the height adjuster (Q) and U-bracket (K) properly.

1. Attach the height adjuster (Q) on the bracket (K) by using a bolt (7) through two washers (W-2) and a nut (V-2).
2. Attach the height adjuster handle (S) to the height adjuster (Q) by using a screw (8) through a washer (W-1) and a nut (V-1).
3. Attach the top main pipe onto the middle main pipe at the joint using a bolt (1) through two washers (W-3) and a nut (V-3) to secure. Assemble the middle main pipe and the lower main pipe in the same way.

Step 7

Attention! It is recommended to be two persons when filling the base with sand.
Do not use water, as it can leak. In cold weather freezing may cause damage if the base is filled with water.

1. Place the basketball stand at a suitable location and unscrew the lid of the sandbase.
2. Adjust the basketball stand to the lowest setting and tilt the stand 45 degrees, as shown in the picture below. It is recommended to be two adults.
3. Fill the sandbase with sand.
4. When the base is seemingly full of sand, tilt the basketball stand back down and pour more sand into the base.

WARNING! Failure to follow the instructions may cause bodily damage.

CONTACT

• Bestplay A/S
• Knullen 22
• 5260 Odense S
• Tlf. +45 70 22 72 92
• Denmark

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>