BELLA 17610 Series 4 Slice Long Slot Toaster Instruction Manual
- June 14, 2024
- Bella
Table of Contents
4 Slice Long Slot
Toaster
Instruction Manual
Read this booklet thoroughly before using and save it for future reference
www.bellahousewares.com
Register your product and get support
Thank You For Your Purchase
Register and sign up for special announcements and trendy recipes!
Tell us what you think!
Rate, review or ask us a question.
GO TO: bellahousewares.com
#myBELLAlife
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
- READ ALL INSTRUCTIONS.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electrical shock do not immerse cord, plugs, or appliance in water or other liquid.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest store for examination, repair or adjustment.
- The use of accessory attachments not recommended by the appliancemanufacturer may cause injuries.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- To disconnect, press CANCEL button, then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- Oversize foods, metal foil packages, or utensils must not be inserted in a Toaster as they may involve a risk of fire or electric shock.
- A fire may occur if Toasters are covered or touching flammable material, including curtains, draperies, walls, and the like, when in operation.
- Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
- Countertop use only
WARNING: ELECTRICAL SHOCK HAZARD. Never attempt to dislodge food inside the Toaster while the Toaster is plugged in. Doing so could cause an electrical shock hazard or a risk of fire.
ADDITIONAL IMPORTANT SAFEGUARDS
CAUTION HOT SURFACES: This appliance generates heat and escaping steam during use. Proper precautions must be taken to prevent the risk of burns, fires or other injury to persons or damage to property.
- A person who has not read and understood all operating, toasting, and safety Instructions is not qualified to operate this appliance. All users of this appliance must read and understand this Instruction Manual before operating or cleaning this appliance.
- If this appliance falls or accidentally becomes immersed in water, unplug it from the wall outlet immediately. Do not reach into the water!
- When using this appliance, provide adequate air space above and on all sides for air circulation. Do not operate this appliance while it is touching or near curtains, wall coverings, clothing, dishtowels, or other flammable materials.
- To reduce the risk of fire, do not leave this appliance unattended during use.
- If this appliance begins to malfunction during use, press CANCEL button and unplug the cord. Do not use or attempt to repair a malfunctioning appliance!
- The cord to this appliance should only be plugged directly into a 120 V AC electrical wall outlet.
- Do not use this appliance in an unstable position.
- Use the Toaster on a hard, flat surface. Do not place it near a flame or heat or on a soft surface (such as carpet). Avoid placing it where it may tip over during use. Dropping the Toaster could cause it to malfunction.
- Do not operate unattended
- When heating toaster pastries, always use the lightest toast color setting.
WARNING: ELECTRICAL SHOCK HAZARD. Never attempt to dislodge food inside
the Toaster while the Toaster is plugged in. Doing so could cause an
electrical shock hazard or a risk of fire.
CAUTION: This appliance is hot during operation and retains heat for some
time after turning off. Always use oven mitts when handling hot materials and
allow metal parts to cool before cleaning. Do not place anything on top of the
Toastwhile it is operating or while it is hot.
CAUTION:
DO NOT toast pastries with runny fillings or frosting.
DO NOT toast torn slices of bread.
DO NOT place buttered bread or wrapped food into the Toaster.
DO NOT toast small-size breads, mini-baguettes, breadsticks, etc.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
Notes on the Plug
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician.
Do not modify the plug in any way.
Notes on the Cord
The provided short power-supply cord (or detachable power-supply cord) should
be used to reduce the risk resulting from becoming entangled in or tripping
over a longer cord.
Always plug directly into a wall outlet/receptacle.
A. A short power-supply cord (or detached power-supply cord) is provided to
reduce the risk resulting from becoming entangled in or tripping over a long
cord.
B. Longer detachable power-supply cords or extension cords are available and
may be used if care is exercised in their use.
C. If a long detachable power-supply cord or extension cord is used:
- The marked electrical rating of the cord set, or extension cord should be at least as great as the electrical rating of the appliance.
- The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally; and
- If the appliance is of the grounded type, the cord set or extension cord should be a grounding-type 3-wire cord.
Plasticizer Warning
CAUTION : To prevent Plasticizers from migrating to the finish of the
countertop or tabletop or other furniture, place NON-PLASTIC coasters or
place mats between the appliance andthe finish of the countertop or tabletop.
Failure to do so may cause the finish to darken; permanent blemishes may
occur, or stains can appear.
Electric Power
If the electrical circuit is overloaded with other appliances, your appliance
may not operate properly. It should be operated on a separate electrical
circuit from other appliances.
Getting To Know Your Toaster
Before Using For The First Time
- Remove all packaging materials including those that may be inside the toasting slots or toasting lever slot.
- Wipe the stainless-steel exterior with a damp cloth. Dry thoroughly. Do not use abrasive cleaners.
- Do not put the toaster, cord or plug in water.
- Make sure both the crumb tray is locked in position on the bottom of the toaster and the toasting lever is in the UP position.
- Unwrap power cord from cord storage area on underside of toaster and plug into a 120V AC outlet.
- Turn the browning control dials to (1), the lightest setting.
- Lower the toasting levers until they lock in place. It is recommended to run 2 cycles of toast without bread before the first use.
NOTE: Toaster may emit a thin smoke on the initial use. This is normal
and not detrimental to the performance of the toaster.
Automatic centering guides
Lowering the toasting lever closes the centering guides and holds the bread or
toaster food centrally in the toasting slots.
NOTE: The toasting lever will not lock down unless the toaster is plugged
into a 120V AC electrical outlet.
Toasting instructions
-
Before toasting, make sure crumb tray are in position on the bottom of the toaster and the toasting lever is in the UP position.
-
Make sure no bread or other objects are inside the toasting slots. Place toaster on a flat, level, heat resistant surface.
-
Remove all protective wrappings from food before placing into the toasting slot(s).
IMPORTANT: Avoid toasting torn bread slices or small pieces of toaster food that may get lodged in toasting slot(s). -
Plug the power cord into a 120V AC electrical outlet.
-
Insert bread or toaster food into 1 to 2 the toasting slot(s). it can be inserted four slices at most every time.
Only the regular slice can be placed into the bread slot. -
Set color control knob to your desired color. There is 7-position level, the lowest is white and the highest is puce.
The bread slice can be toasted to golden color at the position of “4”. -
Lower the toasting lever until locked into place. The automatic centering guides hold food upright for uniform side-to-side toasting. When the bread is lowered into position, the CANCEL button will illuminate, and toasting will begin.
NOTE: The toasting lever will not lock into position unless the toaster is plugged into a 120V AC electrical outlet.
NOTE: When toasting a single slice, the bread may be placed in any toasting slot.
NOTE: To prevent a fire hazard, never place bread over the opening of the toaster; always place bread into the slots.
NOTE: DO NOT change the browning selection during the toasting cycle. Press any illuminated CANCEL button; then turn the browning control dial to adjust. Lower the toasting lever and toast until the desired toast color is achieved. -
At the end of the toasting cycle, bread or toaster food will rise automatically. Use the high lift lever to remove smaller toaster foods or breads such as English muffins.
-
Remove bread from toasting slot(s). Use care when removing bread as the bread and the top of the toaster will still be hot.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage the heating element or cause injury. -
To interrupt toasting, press the illuminated CANCEL button.
-
Unplug cord from wall outlet when not in use and before cleaning. Do not attempt to dislodge food when the toaster is plugged in.
Reheat Button
-
Use the reheat to warm through toasted bread or any toaster food that has cooled.
NOTE: This toaster has a special setting for reheating toast, which overrides the toaster’s browning setting.
IMPORTANT: Use REHEAT function with plain, unbuttered toast ONLY. -
Place bread into 1 to 2 of the toasting slots.
-
Lower the toasting lever until locked into place. The automatic centering guides hold food upright for uniform side-to-side toasting. The CANCEL button will illuminate.
-
Press the REHEAT button. Both Cancel and reheat button will be illuminated; the cycle will begin.
-
At the end of the REHEAT cycle, the toasting lever(s), reheated bread, or toaster food will rise automatically, and the toaster will turn OFF.
-
Remove bread or toaster food from the toasting slot(s). Use care as the top of the toaster will still be hot.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage the heating element or cause injury. -
To interrupt the REHEAT cycle, press the illuminated CANCEL button.
-
Unplug cord from wall outlet when not in use.
Defrost Button
Your Toaster can defrost bread and toast it in a single cycle.
-
Place the frozen bread in the toaster.
-
Set the browning control to desired shade setting.
-
Press the loading lever down. The CANCEL button will illuminate.
-
Press the DEFROST button. Both Cancel and Defrost button will be illuminated; the cycle will begin.
-
The loading lever will rise automatically when the toasting cycle is complete.
-
Remove bread or toaster food from the toasting slot(s). Use care as the top of the toaster will still be hot.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage the heating element or cause injury. -
To interrupt the DEFROST cycle, press the illuminated CANCEL button.
-
Unplug cord from wall outlet when not in use.
Cancel Button
- When the toasting lever is lowered, the CANCEL button will illuminate, and toasting will begin.
- To stop or interrupt any toasting cycle, press the illuminated CANCEL button. The bread or toaster food will automatically rise; the toaster will turn OFF.
- Unplug cord from wall outlet when not in use.
Convenience Food Toasting
Many varieties of packaged convenience food are available today, both frozen
and non-frozen (shelf pastry). Since toaster foods and individual tastes vary,
it is difficult to recommend exact browning settings. However, after a little
experimentation you will discover the best setting for your needs. You may
also wish to refer to the heating instructions on convenience food packaging.
Toaster Pastry
For best results, follow the instructions printed on the pastry package. If
the package does not have instructions, position the left or right
corresponding browning control dial to medium, between (3) and (4). Some
pastries may require a second toasting cycle.
NOTE: Do not use this toaster for toasting pastry items with runny-type
frosting or open fillings.
CAUTION: Never leave toaster unattended when toasting pastries.
Non-Frozen Shelf Pastry
Turn the browning control dial to a lighter setting. For thicker convenience
foods, it may be necessary to adjust the browning control dial(s) to a higher
setting / longer toasting cycle.
Removing Lodged Foods
NOTE: This toaster is equipped with Anti-Jam feature. If any toast or
toaster food gets jammed, the toaster will shut OFF automatically.
-
If, after toasting, a piece of bread or any other toaster food becomes lodged in any of the toasting slots, unplug the toaster and allow it to cool.
-
Hold the toasting lever down. Turn the toaster upside down and shake the food loose.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage the heating element or cause injury. -
Clean the crumb tray and replace.
Important Points
- Remove all protective wrappings from food before placing into the toasting slot(s).
- For best results, clean the crumb tray(s) frequently.
- Different breads require different color settings. Press the illuminated CANCEL button at any time to check toast color.
- Do not block extra wide toasting slots. Never place any object over the top opening.
- Do not toast buttered bread, buttered Texas toast, buttered English muffins, buttered bagels or buttered pita bread. Melted butter will cause fire
- When toasting more than 1 slice of bread, use slices of similar size, thickness and freshness.
- Stale bread, thin bread, or sweet bread products, such as tea cakes and fruit loaf, brown much more quickly than ordinary bread, so they should be toasted on the lighter settings.
- Never immerse toaster, cord, or plug in water or other liquid.
- Never use a fork or sharp-edged utensil to remove toast, because that may damage the heating element or cause injury.
- If toaster starts to smoke, Press Cancel to stop toasting immediately.
- Never attempt to remove bread jammed in the slots without unplugging the toaster from the electrical outlet first. Be sure not to damage the internal mechanism or heating elements when removing bread.
User Maintenance Instructions
This appliance requires little maintenance. It contains no user-serviceable parts. Any servicing requiring disassembly other than cleaning must be performed by a qualified appliance repair technician.
Care & Cleaning Instructions
CAUTION: Do not immerse toaster, cord, or plug in water or any other
liquid.
CAUTION: Be sure the toaster is unplugged before cleaning.
CRUMB TRAY : The crumb tray is located on the bottom of the toaster.
Working over a sink or garbage receptacle, pull the crumb tray out of the back
to remove. Wipe crumb tray with a clean, damp cloth. Push crumb tray back into
position. Make sure the crumb tray is locked securely into the bottom of the
toaster.
EXTERIOR: Wipe the toaster exterior after toaster cool down with a clean,
damp cloth. Do not use abrasive cleaners. Do not put cord or plug in water or
liquid.
Storing Instructions
- Unplug unit, allow to cool, and clean before storing.
- Store toaster in its box in a clean, dry place.
- Never store toaster while it is hot or still plugged in.
- Never wrap cord tightly around the appliance; use the storage area on the bottom of the toaster.
- Do not put any stress on the cord where it enters the unit, as it could cause the cord to fray and break.
Limited TWO-YEAR Warranty
SENSIO Inc. hereby warrants that for a period of TWO YEARS from the date of
purchase, this product will be free from mechanical defects in material and
workmanship, and for 90 days in respect to non-mechanical parts. At its sole
discretion, SENSIO Inc. will either repair or replace the product found to be
defective, or issue a refund on the product during the warranty period.
The warranty is only valid for the original retail purchaser from the date of
initial retail purchase and is not transferable. Keep the original sales
receipt, as proof of purchase is required to obtain warranty validation.
Retail stores selling this product do not have the right to alter, modify, or
in any way revise the terms and conditions of the warranty.
EXCLUSIONS:
The warranty does not cover normal wear of parts or damage resulting from any
of the following: negligent use of the product, use of improper voltage or
current, improper routine maintenance, use contrary to the operating
instructions, disassembly, repair, or alteration by anyone other than
qualified SENSIO Inc. personnel. Also, the warranty does not cover Acts of God
such as fire, floods, hurricanes, or tornadoes.
SENSIO Inc. shall not be liable for any incidental or consequential damages
caused by the breach of any express or implied warranty. Apart from the extent
prohibited by applicable law, any implied warranty of merchantability or
fitness for a particular purpose is limited in time to the duration of the
warranty. Some states, provinces or jurisdictions do not allow the exclusion
or limitation of incidental or consequential damages, or limitations on how
long an implied warranty lasts, and therefore, the above exclusions or
limitations may not apply to you. The warranty covers specific legal rights
which may vary by state, province and/or jurisdiction.
HOW TO OBTAIN WARRANTY SERVICE:
You must contact Customer Service at our toll-free number:
1-866-832-4843.
A Customer Service Representative will attempt to resolve warranty issues over
the phone. If the Customer Service Representative is unable to resolve the
problem, you will be provided with a case number and asked to return the
product to SENSIO Inc. Attach a tag to the product that includes: your name,
address, daytime contact telephone number, case number, and description of the
problem. Also, include a copy of the original sales receipt. Carefully package
the tagged product with the sales receipt, and send it (with shipping and
insurance prepaid) to SENSIO Inc.’s address. SENSIO Inc. shall bear no
responsibility or liability for the returned product while in transit to
SENSIO Inc.’s Customer Service Center.
bellahouswares.com
For customer service questions or comments
Dudas o comentarios contactar el departamento de servicio al cliente
1-866-832-4843 /
help@bellahousewares.com
Sensio Inc.
New York, NY 10016/USA
17619 17620 17621 17622 17623 17624 17625 17626 17627 17628 17629 17630 R0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>