Flint Garden FGHLH-27137-4A-GD 4-Light Metal Cage Chandelier Modern Hanging Pendant Light Instruction Manual
- October 30, 2023
- FLINT GARDEN
Table of Contents
Flint Garden FGHLH-27137-4A-GD 4-Light Metal Cage Chandelier Modern
Hanging Pendant Light
Product Information
The product model number is HLH-27137-4A and it includes an adjustable ring, a chain, a hardware lamp body (F), and two locks.
Adjustable Ring
The adjustable ring (D) can be used to adjust the height of the lamp
according to your preference.
Chain
The chain (E) is used to connect the lamp body (F) to the canopy (A) and
allows for easy installation and removal of the lamp.
Locks
The product comes with two locks that are used to secure the chain to the
canopy and lamp body.
Product Usage Instructions
- Unscrew the locks on two ends of the adjustable ring (D).
- Fix the locks of chain (E) to the loops of the canopy (A) and hardware lamp body (F).
- Adjust the height of the lamp by sliding the adjustable ring (D) up or down.
Note: Ensure that the locks are securely fastened to prevent any accidents or damage to the lamp.
PACKAGE CONTENTS
A | Canopy | 1 |
---|---|---|
B | Mounting Bracket | 1 |
C | Cap nuts | 2 |
D | Adjustable ring | 2 |
E | Chain | 1 |
F | Hardware lamp body | 1 |
G | ||
--- | --- | |
H | ||
I | ||
J | ||
K |
WARRANTY
- Parrot Uncle warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser.
- To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Parrot Uncle warehouse that the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address, and a description of the claimed product defect.
- If any of the warranted products are found by Parrot Uncle, in its sole discretion, to be defective, such products will, at Parrot Uncle’s sole option and cost, be replaced, repaired or refunded less an amount directly attributable to the Original Purchaser’s prior use of the product Parrot Uncle will return the repaired or replaced product prepaid freight. This warranty does not cover labor or other costs or expenses to remove or install any defective, repaired, or replaced product
- The parties here expressly agree that Original Purchaser’s sole and exclusive remedy against Parrot Uncle shall be for the repair, replacement, or refund of defective products as provided herein. This warranty extends only to product ownership by the Original Purchaser; is not transferable “‘1ether to heirs, subsequent owners, or otherwise; and is void if the Original Purchaser ceases tO own the product.
- This warranty does not apply to any products that have been subjected to misuse, mishandling, misapplication, connected to the voltage at more than 5% above standard North American voltage, unusual use (including but not limited to use in an environment “‘1ere the annual average ambient operating temperature is below 27 or above 95 degrees Fahrenheit), neglect (including but not limited to improper maintenance), accident, acts of god such as high winds, improper installation or care, failure to follow the Product’s written instructions for normal use and care, improper packaging of products returned to Parrot Uncle, modification (including but not limited to the use of unauthorized parts or attachments), or adjustment or repair. Significant product exposure to chemicals, harsh cleaners, salt water, or salt air will void any and all warranties on exterior finishes. This warranty only applies “‘1en all components, including transformers, have been provided by Parrot Uncle. Substituting another manufacturer’s product and/or components will render the warranty completely void.
- THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
- THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR INFRINGEMENT. ORIGINAL PURCHASER SHALL IN NO EVENT BE ENTITLED TO, AND PARROT UNCLE SHALL NOT BE LIABLE FOR, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, INCLUDING, BUT NOT LIMITED TO LOSS OF PROFIT, PROMOTIONAL AND/OR MANUFACTURING EXPENSES, OVERHEAD, INJURY TO REPUTATION AND/OR LOSS OF CUSTOMERS.
ASSEMBLY INSTRUCTIONS
-
1. Unscrew the locks on two ends of the adjustable ring (D). Fix the locks of chain (E) to the loops of the canopy (A) and hardware lamp body (F).![Flint-Garden-FGHLH-27137-4A-GD 4-Light-Metal-Cage-Chandelier-Modern-Hanging-Pendant-Light-FIG-2](https://manuals.plus/wp-content/uploads/2023/06/Flint-Garden-FGHLH-27137-4A-GD-4-Light-Metal-Cage-Chandelier-Modern-Hanging-Pendant-Light-FIG-2.png)
-
Connect mounting bracket (B) to the outlet box with short machine screws (BB). Hardware Used
-
Wire connection guide Ground wire
Hardware Used- For installation in the United S states Wrap ground wire from the outlet box around the ground screw preassembled on mounting bracket (B) no less than 2 in. from the wire end. Tighten the ground screw. If the fixture is supplied with a ground wire, connect to the outlet ground wire with a wire connector (AA).
- For installation in Canada If the fixture is supplied with ground wire, wrap ground wire around the ground screw on the mounting bracket (B). Tighten ground screw. Connect the fixture ground wire to the outlet ground wire with the wire connector (AA).
- Supply wires Connect the Neutral (White) supply wire from the outlet box to the Neutral fixture wire (White or Parallel Cord “D” shaped and ribbed). Connect the Hot (Black) supply wire from the outlet box to the Hot fixture wire (Black or Parallel Cord round and smooth).
- NOTE: Fixture wires will either bE Black or White. Parallel Cord SPT-1 lamp wire with one round smooth wire and one “D” shaped
-
Connect the cap nuts(C) and canopy(A) together and lock them securely.
-
Insert 60-watt max. a candelabra-base incandescent bulb or CFL/LED equivalent (none included) into the socket.
CARE AND MAINTENANCE
- Always be certain that the electric current is turned off before cleaning this item.
- Use a soft, moist cloth with mild non-abrasive soap to clean the fixture. Never use glass cleaner on fixtures, as it will damage the metal finish.
- All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher.
TROUBLESHOOTING
HARDWARE CONTENTS
SAFETY INFORMATION
Please read and understand this entire manual before attempting to
assemble, operate or install the product.
WARNING
- IMPORTANT: NEVER attempt any work without shutting off the electricity.
- Place the main power switch in the “OFF” position and unscrew the fuse(s), or switch “OFF” the circuit breaker switch(es), that controls the power to the fixture or room you are working in.
- Place the wall switch in the “OFF” position. If the fixture to be replaced has a svvitch or pull chain,
- place it in the “OFF” position.
- Do not use bulbs with wattage greater than specified on this fixture.
- California Prop. 65: This lighting fixture contains chemicals known to the state of California to cause cancer, birth defects, and/or other reproductive harm. Wash hands after use.
CAUTION
- If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate completely, please contact a licensed electrical contractor.
- All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts out, or use any parts that are worn out or broken. Failure to obey this instruction could invalidate ETL listing and/or C.S.A certification of this fixture
PREPARATION
Before beginning assembly of the product, make sure all parts are present.
Compare parts with the package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 30 minutes to 1 hour Tools Required for Assembly (not
included): Phillips screwdriver, flathead screwdriver, wire strippers,
electrical tape, ladder, and safety glasses.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>