Sedna VA4220ZB Smart Water Valve User Manual
- June 17, 2024
- Sedna
Table of Contents
Sedna VA4220ZB Smart Water Valve
Product Information
Specifications
- Protocol: Zigbee 3.0
- Frequency: 2.4 GHz
- Transmission Power: +20 dBm
- Receiver Sensitivity: -108 dBm
- Standards: CSA B125.3-12, EU RoHS 2, NSF/ANSI61
- Indoor Installation Only
FEATURES
- Remote access and control of the main water supply through smartphone and tablet*
- Possibility to back-up the device with lithium batteries (not included) for ongoing operation**
- Self-testing system ensuring proper operation at all times throughout the life of the device
- 20 water leak detectors or accessories can be controlled with Sinopé’s smart water valve
- Possibility to open and close the valve manually
- Removable controller allowing the manual valve to be left in place if a part is replaced
Remote access requires a permanent Internet connection and your Zigbee platform app.
IMPORTANT : Your Wi-Fi router and Zigbee Gateway must be connected to an Uninterruptible Power Supply (UPS) so that the valve closes as soon as a leak is detected by a Sinopé water leaks detector (not included). For maximum protection, even in the event of a power failure, the Sedna VA42220WF-K5 water damage protection system is preferred
COMMUNICATION
- Protocol: Zigbee 3.0
- Frequency: 2.4 GHz
- Transmission power: +20 dBm
- Receiver sensitivity: -108 dBm
ALSO AVAILABLE
PEX Ready smart valve
STANDARDS
- Complies with CSA B125.3-12 Plumbing fittings
- Valve body tested EU RoHS 2 (Directive 2011/65 / EU)
- Complies with NSF/ANSI61 standards Link your water leak detectors with the GT130 gateway to close the Sinopé Zigbee valve See the batteries’ status directly in the app
- Create automation in the app so that Sinopé’s connected devices react when water is detected
Add the Zigbee valve as a secondary valve to the main VA4220WF valve if there is a 2nd water inlet
IMPORTANT : In case of power failure, the signal between the water leak
detector and your gateway Zigbee will not be transmitted. The closing signal
won’t be able to reach the valve. For optimal protection, even in the event of
a power failure, the
Sedna VA4220WF-K5 water damage protection system is preferred.
Available only with Sinopé Zigbee devices (requires GT130 gateway).
TECHNICAL SPECIFICATIONS
- Valve body: Stainless steel, lead-free
- Controller’s base: Fiberglass reinforced
- Ball valve: Full port valve
- Maximum pressure: 145 PSI
- Maximum torque: 2.5 N.m
- Power supply: 5V / 5W (included)
- Backup power supply: 4 AAA lithium batteries (not included)
- Operating temperature: 0 °C to 40 °C (32 °F to 104 °F)
- Maximum water temperature: 85 °C (185 °F)
- Storage: -20 °C to 50 °C (-4 °F to 122 °F)
warranty
3-year warranty
Indoor installation only
DIAMETER
- VA4220ZB – ¾ in NPT x ¾ in NPT
- VA4221ZB – 1 in NPT x 1 in NPT
T: 450.741.7700 TF: 1.855.741.7701
sinopetech.com –
[email protected]
Saint-Jean-sur-Richelieu, Qc, Canada
Neviweb® is a trademark of Sinopé Technologies Inc. registered in Canada and the U.S. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Google is a trademark of Google LLC.