eisco PH1238 Demonstration DC Electric Motor User Guide
- June 17, 2024
- eisco
Table of Contents
eisco PH1238 Demonstration DC Electric Motor
Specifications:
- Product Name: Demonstration DC Electric Motor PH1238
- Features: Removable bar magnet, 2-pole armature, Enameled Copper Wire
- Socket Type: 4mm Sockets
- Power Source: 6-8V DC
Product Usage Instructions:
- Insert the bar magnet into its designated slot on the motor.
- Connect a 6-8V DC power source to the Demonstration DC Electric Motor using the provided 4mm Sockets.
- Turn on the power source to activate the motor.
- To start the coil spinning, gently give it a push to initiate movement.
- Experiment with the current direction/magnetic field direction and what effect it has on the direction of spinning coil
- Learn about Flemming’sRight Hand Rule.
For more information and products, visit our website: www.eiscolabs.com
FAQ:
Q: What should I do if the motor does not start spinning?
A : Check the connections of the power source and ensure it is providing the correct voltage. Make sure the bar magnet is inserted properly and try giving the coil a gentle push to start it.
Q: Can I use a power source with a voltage higher than 8V?
A : It is recommended to use a power source within the range of 6-8V to prevent damage to the motor.
References
Read User Manual Online (PDF format)
Loading......