Laxihub P2T Smart Pan Tilt Wi-Fi Camera User Guide
- June 17, 2024
- Laxihub
Table of Contents
Laxihub P2T Smart Pan Tilt Wi-Fi Camera
Specifications
- Product name: P2(T)
- Resolution: P2 – 1920×1080, P2T – 2304 x 1296
- Angle of view: Up to 10m
- IR Distance: Micro SD card (up to 128GB)
- Pan/Tilt: Yes
- Working temp: Not specified
- Local storage: Micro SD card (up to 128GB)
- Input power: DC 5V, 1A
- Consumption: Up to 4.5W
- Supported phone OS: iOS 9 / Android 5.0 and above version
- Wi-Fi: 2.4G Wi-Fi, 2412-2472 MHz (Max. power20dBm)
Product Usage Instructions
Packing List
- Camera X1
- Power adaptor X1
- Power cable X1
- Bracket X1
- Screw X3
- Quick guide X1
Product Description
- LED indicator
- Microphone
- Speaker
- Reset button
- Power port
- SD card slot
Installation
- Use the included mounting bracket to fix the camera to a clean surface.
- Put the camera on a flat surface.
Product Configuration
- Scan QR code to download and install the Arenti APP.
- Open the App and create a new account following the prompts.
- Pair the camera with the app by following the on-screen instructions.
Frequently Asked Questions (FAQ)
-
What should I do if my camera is not connecting to the network?
If your camera is not connecting to the network, please ensure that:- Your Wi-Fi network is on the 2.4GHz band.
- The Wi-Fi password entered is correct.
- The camera is in pairing mode.
- Your Wi-Fi network is active.
-
How can I add multiple cameras to the app?
To add multiple cameras, follow the pairing process for each camera individually. -
How do I change the Wi-Fi network for the camera?
To change the Wi-Fi network, restore the camera to factory settings and follow the steps to add it to the new network. -
Where can I get further assistance?
If you encounter any issues or have questions, please contact support@arenti.com for help.
Quick start guide
- Packing list
- Product description
- Installation
- Product configuration
- Specification
- Legal notice
Packing list
Product description
- LED indicator
- Microphone
- Speaker
- Reset
- Power port
- SD card slot
Notice
To reset the device, press and hold the reset button for 5s. The camera beeps
when the operation is completed.
LED indicator of camera:
| Flashing red light (slow) | Wait for network config |
|---|---|
| Flashing red light (fast) | Connecting the network |
| Fixed red light | Camera is malfunctional |
| Fixed blue light | Camera is working correctly |
Installation
- Use the included mounting bracket to fix the camera to a clean surface.
- Put the camera on a flat surface.
Product Configuration
Scan QR code to download and install the Arenti APP. Also, you can search
“Arenti” on App Store (IOS) or Google Play (Android).
Registration
Open the App. If you are a new user, tap to create a new account and follow
the prompts to complete account setup.
Note: You must agree with the Privacy Agreement.
Pairing
Open APP home page, Click “+” or “Add” and select icon according to actual
camera. Power on the device. For about 30 seconds, the camera will emit start-
up tone and LED indicator will flash red slowly.
Note: When pairing, please put the camera and mobile phone close to the
router. If camera is not in the red slow blinking after 30 seconds of powering
on, press and hold the reset button for 5 seconds to reset, and then configure
the network again.
Select the Wi-Fi network and input the password, and then click “Next”. Make sure that your phone has connected to a fluent and steady Wi-Fi already.
Scan the QR code in your phone with the camera and click “Next”, when the camera comes out “dong dong dong” and LED indicator becomes solid blue.
If no device is found and the pairing process is not successful, please check below instructions:
- Wi-Fi network is 2.4GHz.
- Wi-Fi password entered is correct and the same Wi-Fi network is used on the mobile device.
- Camera is in pairing mode.
- Check your WiFi for network activity.
If there doesn’t work please or you have any other problems, please contact support@arenti.com to get help.
Notice
If you have multiple cameras, please follow steps again to add devices one by
one.
To change Wi-Fi network, please restore the camera to factory settings and
follow steps to add the camera.
Specification
| Product name | P2 | P2T |
|---|---|---|
| Resolution | 1920×1080 | 2304 x 1296 |
| Angle of view | 100° | 110° |
| IR Distance | Up to 10m | |
| Pan/Tilt | 0°~355° (Pan); -15°~78° (Tilt) | |
| Working temp | -20°C to 50°C | |
| Local storage | Micro SD card (up to 128GB) | |
| Input power | DC 5V, 1A | |
| Consumption | Up to 4.5W | |
| Supported phone OS | iOS 9 / Android 5.0 and above version | |
| 2.4G Wi-Fi | 2412-2472 MHz (Max. power＜20dBm ) |
Legal notice
Support www.arenti.com
Symbols Direct current (DC)
Don’t throw batteries or out of order products with the household waste
(garbage). The dangerous substances that they are likely to include may harm
health or the environment. Make your retailer take back the products or use
selective collect of garbage proposed by your city.
Hereby, we declares that the radio equipment type ‘P2(T)’ is in compliance
with the Directive 2014/53/EU The full test of the EU declaration of
conformity is available at the following Internet address:
www.arenti.com
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Safety Information
Power Adapter Safety：
- The power plug is intended to serve as a disconnect device. Do not drop or cause an impact to the power adapter.
- If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using it at once. Continued use may lead to electric shocks, short circuits, or fire.
- Do not touch the device or the power adapter with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.
Child’s safety
- Comply with all precautions with regard to child’s safety. Letting children play with the device or its accessories may be dangerous.
- The device and its accessories are not intended for use by children. Children should only use the device with adult supervision.
Operation safety
- Use the device under allowed humidity and temperature conditions.
- Do not aim the device at strong light sources (such as lamplight, and sunlight) when focusing it, to avoid reducing the lifespan of the CMOS sensor, and causing overbrightness and flickering.
- Observe local laws and regulations, and respect the privacy and legal rights of others.
© 2023. All rights reserved. All trade names are registered trademarks of respective companies Apple, the Apple logo, iPhone are trademarks of Apple Inc. registered in the U.S. and other countries. Google, the Google logo, Android are trademarks of Google Inc. App Store is a service mark of Apple Inc. Google Play is a service mark of Google Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>