Laxihub M1 Smart Indoor Wi-Fi Camera User Guide
- June 4, 2024
- Laxihub
Table of Contents
Laxihub M1 Smart Indoor Wi-Fi Camera
Packing list
Product Description
Notice
- To reset the device, press and hold the reset button for 5 seconds.
- The camera beeps when the operation is complete.
Flashing red light (slow) | Waiting configuration |
---|---|
Flashing red light (fast) | Searching WiFi network |
Fixed blue light | Camera connected to WiFi |
Flashing blue light | Access point mode |
Camera configuration
- Step 1 Turn on your camera by plugging in the power adapter.
- Step 2 Connect your smartphone to the Wi-Fi network.
- Step 3 Download the Arenti app from the App Store or Google Play depending on your device.
- Step 4 Laun Arenti app and sign up for the first use.
- Step 5 Follow the steps below to add your camera, then follow the on-screen instructions.
Note
- If you have multiple cameras, please follow step 5 again to add devices one by one.
- To change Wi-Fi network, please restore the camera to factory settings and follow step 5 to add the camera.
Specifications
Support
DISPOSAL
Don’t throw batteries or out-of-order products with household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collect of garbage proposed by your city.
CE
Hereby, Arenti, declares that the radio equipment type ‘M1’ is in compliance with Directive 2014/53/EU. The full test of the EU declaration of conformity is available at the following Internet address: http://www.laxihub.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>