Bath Depot BFS-6912MBK KILLIAN Matte Black 60 Freestanding Bathtub Installation Guide

June 17, 2024
Bath Depot

Bath Depot BFS-6912MBK KILLIAN Matte Black 60 Freestanding Bathtub

Specifications

  • Model: 3912MBK
  • File No.: 8906
  • Certified Model: JL-I-X2-Y2-Z2-W

Dimensions

  • Width: 580mm (22-7/8″)
  • Length: 1200mm (47-1/4″)
  • Height: 750mm (29-1/2″)

Installation
Read the instructions carefully before proceeding with the installation. Ensure plumbing is done by a certified plumber in compliance with the plumbing and building codes of your region.

Accessories Included

  • Brass Pipe: 1 x
  • Pop-Up Drain: 1 x
  • Plastic Pipe: 1 x
  • Adapter: 1 x

Care Instructions
Clean the product with water and mild detergent. Avoid abrasive or corrosive cleaners, steel wool, acetone, dry cleaning products, or ammonia compounds. Remove bath mat after each use. Use cleaning products specifically made for acrylic.

Warranty Information
BATO offers a 10-year limited warranty from the date of purchase for residential and domestic use. The warranty covers manufacturing defects in various components as specified.

FAQ

  1. What does the warranty cover?
    The warranty covers manufacturing defects in specified components for different durations (1 year, 2 years, and 10 years) from the date of purchase.

  2. What are the exclusions from the warranty?
    The warranty does not cover damages due to misuse, overuse, non-residential use, neglect, lack of maintenance, or use of corrosive/abrasive products. It also excludes shipping and labor costs and normal wear and tear of the goods.

ATTENTION

BEFORE STARTING

Our products are carefully inspected and packaged in our warehouse for shipping. Only remove the protective film at the very end of the installation to ensure maximum protection. (Except where bathtub surface will be in permanent contact with another suface (I.E., Wall / faucet, etc)). It is very important that you carefully inspect the product before installation. If a product is defective, please contact the compagny before installation. The installer will be held responsible for any breakge or damages following the use of a defective product. To protect the unit during installation, place a cardboard in the bottom of the bathtub. Verify that the bathroom floor is leveled and strong enough to support a minimum weight of 1500 Ibs, reinforce the existing flooring if needed. It is IMPORTANT to verify the drain location (it can be place of the left, middle of right) before drilling a hole in the floor. It is important to provide an access near the plumbing, pump and/or control boxes allowing to easily disassemble and/or repair these components. The whirpool/Therapeutic systems must be connected before the final installation. (see the installation and user’s guide for whirpool/therapeutic system).

REQUIRED TOOLS

Bath-Depot-BFS-6912MBK-KILLIAN-Matte-Black-60-Freestanding-
Bathtb-2

IMPORTANT

Bath-Depot-BFS-6912MBK-KILLIAN-Matte-Black-60-Freestanding-
Bathtb-3

INSTRUCTIONS ARE TO BE PRESERVED BY FINAL USER. READ CAREFULLY BEFORE PROCEEDING WITH INSTALLATION
MAKE SURE THAT THE PLUMBING IS DONE BY A CERTIFIED PLUMBER. MAKE SURE THAT YOU RESPECT THE PLUMBING CODE AND/OR BUILDING CODE OF YOUR REGION.

ACCESSORIES

Bath-Depot-BFS-6912MBK-KILLIAN-Matte-Black-60-Freestanding-
Bathtb-4

INSTALLATION

After taking the bathtub out of the box, take the plastic pipe out.

Bath-Depot-BFS-6912MBK-KILLIAN-Matte-Black-60-Freestanding-
Bathtb-5

Install the bathtub at the chosen place. Turn it upside down. Adjust the feet so it is leveled and make sure they stand out form the frame at 1/8 to 1/4″ (3 to 6 mm) to avoid putting weight on the skirt of the tub. Once you have put the tub back on its feet, make sure they all rest on the floor and that everything is leveled.

Bath-Depot-BFS-6912MBK-KILLIAN-Matte-Black-60-Freestanding-
Bathtb-6Place the bathtub at the exact location where it will sit and align the drainage pipes (from the tub and on the floor). Mark the floor around the outside of the skirt. Apply a bead of silicone or adhesive on the mark you made on the floor. Don’t forget to take into account the space left from the feet. Put the tub back in its place and allow the silicone to harden for 24 hours before completing the installation.

  • Connect the draining pipes so that the water drains properly.
  • Once the installation is finished, make sure all connections are watertight.
  • Protect the surface of the bathtub while proceeding to the installation to avoid damages
  • Finish with a bead of silicone to provide rigidity to the skirt and to close the gap between the bathtub skirt and the floor.

MAINTENANCE

  1. Use only soft soap to clean the surface. Never use an abrasive product, an acid or alkaline detergent or any solvent or sharp objects to clean the bathtub surface.
  2. Polish the surface to make it shiny.
  3. Clean the chrome with a soft soap.
  4. After having used the bathtub, dry it with a soft cloth to avoid water stains.

NOTES

  1. Push on the drainer cap to close it and push it again to open it and drain the tub.
  2. If the drain gets clogged, simply unscrew the cap to clean it.

LIMITED WARRANTY

By choosing a BATO product, a leader in the plumbing industry distributing its products across North America, you are sure to make the right choice. On top of the quality materials that are used to make their products, BATO’s advanced manufacturing processes also benefit its products’ quality and longevity. To attest to this, they decided to offer their customers a beneficial warranty. We certify that our products will meet your needs with their style, but also with their manufacturing quality. To make sure that they are reliable and safe, each product was carefully inspected, tested and approved during the quality control process that is in place.

To whom does this warranty apply?
BATO offers a 10-year limited warranty from the date of purchase, exclusive to the first buyer as long as he/she resides in the same property. This warranty applies to all BATO bathtubs. The warranty is intended for residential and/or domestic use.

Care instructions
Clean the product with water and a mild detergent. Abrasive or corrosive cleaners, steel wool, acetone, dry cleaning products or ammonia compounds must never be used to clean the product. If a bath mat is used, it must be removed right after each use. We recommend the use of cleaning products that are made for acrylic specifically.

What is covered by the warranty?

1 *Year                                 2 Years* 10 Years***

Bathtubs Mechanical drains, automatic drains Acrylic and fiberglass against and pushbutton drains   manufacturing defects
Systems and Whirlpool jets, bathing jets, pump,
engines  air blower, pneumatic and electrical _controls

Should there be any manufacturing defects that are not covered by the warranty, the product will need to be inspected prior to following through with the claim. Without that verification, the brand will assume no charge and/or responsibility.

What are the exclusions?
This warranty is applicable on all BATO products purchased on or after December 15, 2021. The warranty doesn’t apply if the product is damaged as a result of misuse, overuse or non-residential use, neglect, lack of maintenance, or the use of corrosive or abrasive products, regardless of the person who did those damages. The warranty does not cover shipping and labour costs. The warranty does not apply to the normal tear and wear of the goods. The warranty doesn’t cover the damages caused by the acts of God or breakage resulting from a shock or mishandling, regardless of the part played by the buyer or the installer. It also excludes the damages caused by an improper installation. BATO doesn’t cover damages caused by a water leak, even if they result directly or indirectly from a product defect, except where the applicable legislation does not allow any exclusion or limitation following indirect or consequential damages. It is fair to say that if the product has a manufacturing defect, it will show as soon as it is installed or shortly after. However, a leak caused by an improper installation could happen a long time after. Therefore, it is strongly advised to have it done by a professional.

All warranty claims must include the invoice copy.
Should a part or product component be defective or the finish damaged following normal domestic and residential use, BATO commits to replacing the defective parts) to the first buyer only. BATO could also, in its sole discretion, commit to offer a full replacement. No indemnity shall be claimed for loss of enjoyment of life, loss of income or losses caused by water.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals