lowes 90087FL Astory 3-Light 16 Inch Matte Black LED Semi Flush Mount Light Instruction Manual

: June 17, 2024
: lowes

Table of Contents

lowes 90087FL Astory 3-Light 16 Inch Matte Black LED Semi Flush Mount
Product Usage Instructions
FAQ
Overview
Assembly Instruction
Wiring Instruction
Product Specifications
Product Packaging
Safety Information
CONTACT US
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

lowes 90087FL Astory 3-Light 16 Inch Matte Black LED Semi Flush Mount

Light

lowes-90087FL-Astory-3-Light-16-Inch-Matte-Black-LED-Semi-Flush-Mount-Light-
product

Product Usage Instructions

Assembly Instruction

Attach Shade (B) up to Fixture body (A).
Fix the Mounting strap (G) to the outlet box with Screw (E).
Connect the wires according to the wiring instructions provided.
Pass Canopy (D) through the Screw (F) and fix it with Finial (C).
Gently bend the PS board (H) slightly and insert it into the bottom of the fixture, then release it and adjust it for proper positioning.

Cleaning

To clean, wipe the fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as scouring pads, powders, steel wool, or abrasive paper.

Safety Information

Always switch off the electricity supply and allow the fixture to cool for 10 minutes before changing the light bulbs.

FAQ

Q: What should I do if the wire connectors do not feel firm?
A : If the wire connectors do not feel firm, carefully redo the connection steps ensuring a proper fit and check again for a secure connection.
Q : How should I handle the cleaning of the fixture?
A : Use a soft cloth to wipe the fixture and mild soap to clean the glass. Avoid abrasive materials like scouring pads, powders, steel wool, or abrasive paper.
Q: What is the recommended power rating for the lamp socket?
A : The lamp socket has a maximum power rating of 60W.

Overview

lowes-90087FL-Astory-3-Light-16-Inch-Matte-Black-LED-Semi-Flush-Mount-Light-
fig-1

Assembly Instruction

Attach Shade (B) up to Fixture body (A).
Fix the Mounting strap (G) to the outlet box with Screw (E).
Connect the wires according to the picture above. (Please refer to the wiring instructions for details )
Pass Canopy (D) through the Screw (F) and fix it with Finial (C).
Gently bend the PS board (H) a little bit insert it into the bottom of the fixture and then release it. Adjust it to make it well-positioned.

Wiring Instruction

Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector(not supplied). If the ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it.
NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
Take note of the colour of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:

[GROUP A]:

Connect to Black House Wire

| [GROUP B]:

Connect to White House Wire

---|---
BLACK| WHITE
PARALLEL WIRE (round & smooth)| PARALLEL WIRE (square & ridged)
WHITE OR GREY WITH TRACER| WHITE OR GREY WITHOUT TRACER
BROWN, GOLD OR BLACK WITHOUT TRACER| BROWN, GOLD OR BLACK WITH TRACER

Take your fixture wire(s) from [Group A] and place it evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
Fit a wire connector over the wires and screw the connector clockwise until you feel firmness.
Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.

Product Specifications

Input voltage: 120V
Rated power: 60W MAX
Lamp socket: E26

Product Packaging

Fixture body × 1
Mounting strap × 1
Screw × 2 & Wire nut × 3
Shade × 1
PC board × 1
Lamp instruction × 1

Cleaning

To clean, wipe the fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.