BlueAnt Pump Air Lite 2 True Wireless Earbuds User Manual

BlueAnt Pump Air Lite 2 True Wireless Earbuds

Specifications

• Charging Time: 2 hours
• Charging Case Capacity: 4 full charges
• Charging Voltage: 5V/1A
• ComfortSeal Tips Sizes: Small, Medium, Large
• Button Functions: Play/Pause, Skip Forward/Back,
  Answer/End/Reject Calls, Activate/Cancel Siri/Google, Volume Control

Product Usage Instructions

Charging Your Pump Air Lite 2

1. Open the charging case.
2. Place the earbuds in the case.
3. Close the lid.
4. Use the supplied charging cable with a 5V/1A charger.
5. The earbuds take 2 hours for a full charge and the case can charge them 4 times.
6. LED lights indicate the charging status (25%, 50%, 75%, 100%). Unplug once fully charged.

Getting Started – Pairing

1. Remove both earbuds from the case and place them in your ears.
2. Wait for the sound indication of connection.
3. The earbuds will enter pairing mode automatically.
4. Pair with your phone by searching for ‘BlueAnt Pump Air Lite 2’.
5. To pair with another phone, power off the earbuds by holding the right command button, then initiate pairing mode.

Fitting Instructions

To ensure optimal sound quality, use the ComfortSeal Tips for the best fit. Try different sizes for the most comfortable and secure fit.

Button Functions

• Listen: Click once to Play/Pause, Double click the Right earbud to Skip Forward, Double click the Left earbud to Skip Back
• Talk: Click to Answer/End Call, Press and hold to Reject Call
• Siri/Google: Click three times to Activate/Cancel Siri/Google
• Volume: Press and hold the Right earbud MFB to increase the volume of the left earbud MFB to decrease the volume
• Power: Earbuds auto-power on/off when removed/placed in the case. Manual power on/off without case available.

Frequently Asked Questions (FAQ)

Q: How do I know when the earbuds are fully charged?

• A: The LED lights on the charging case flash to indicate the charging level (25%, 50%, 75%, 100%). Once fully charged, unplug the case.

Q: Can I use a charger other than 5V/1A to charge the earbuds?

• A: It is recommended to use only a 5V/1A charger to prevent damage to the earbuds during charging.

Q: How do I switch between devices for pairing?

• A: Power off the earbuds by holding the right command button, then follow the pairing process with the new device as outlined in the manual.

Welcome

Thank you for purchasing the BlueAnt Pump Air Lite 2 True Wireless Earbuds. Please read through this manual to get the most out of your earbuds.

Inside the box

Get to know your Pump Air Lite 2

Charging your Pump Air Lite 2

1. Open the charging case
2. Place earbuds in case
3. Close the lid

• Use the supplied charging cable.
• Please use only 5V/1A chargers.
• The Pump Air Lite 2 takes 2 hours for a full charge.
• The Pump Air Lite 2 charging case, takes 2 hours for a full charge.
• The charging case should charge the earbuds 4 times.
• The charging case has 1 light that flashes 4 times. This signifies the charge level of the charging case. It flashes 4 times per 25% charge level.
• 1 flash 25%, 2 flashes 50%, 3 flashes 75%, 4 flashes 100%. Once fully charged, please unplug the charging case.
• The charging case battery level indicator light turns on, when you remove or replace the earbuds in the charging case, to let you know the charge level of the charging case.
• The earbuds have a light that lights up when charging. The earbuds turn off when fully charged. The earbuds may charge at different rates for the left and right sides.

Let’s Get Started Fit

• To ensure the best sound, you need the best fit. Having the best fit creates a seal and enhances the bass performance.
• The diagram on the right is how the earbuds should sit in your ear.
• There are 3 sizes of ComfortSealTips – Small, Medium, and Large.
• To get the most out of the earbuds, it’s best to try out each of the sizes to get the best fit.

Button Functions

Listen

• Click once to Play/Pause
• Double-click the Right earbud to Skip Forward
• Double-click the Left earbud to Skip Back

Talk

Siri/Google

• Click MFB three times to Activate/Cancel Siri/Google

Volume

• When music is playing or on a call
• Press and hold the MFB on the Right earbud to increase volume
• Press and hold the MFB on the Left earbud to decrease volume

Power

1. When you remove the earbuds from the charging case, it will automatically power on, and try to reconnect to the last phone it was connected to.
2. When you replace the earbuds from the charging case, it will automatically power on, and try to reconnect to the last phone it was connected to.
3. To power on without the charging case, press and hold the MFB for 2 seconds.
   • To power off without the charging case, press and hold each MFB earbud for 6 seconds.
4. To pair without the charging case from off, press and hold the MFB on one earbud for seconds, and then pair it with your phone. Then press and hold MFB on the other earbud for 2 seconds to power it on.

• The earbuds announce when the battery is low, when there are about 30 mins of play time left.
• The earbuds feature an iPhone battery meter.
• Mono Operation: It is possible to use the earbuds as a mono headset. Simply remove one of the earbuds from the charging case.

Legal

• PLEASE PROTECT YOUR EARS. BlueAnt devices can reach volumes above 100 decibels. Prolonged use at high volumes may affect your hearing capacity and may result in noise-induced hearing loss (NIHL).
  Please read the enclosed safety card for information about the safe use of BlueAnt products. The Bluetooth w® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by BlueAnt Wireless is under license. Android is a trademark of Google Inc., Apple, iPhone, and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. BlueAnt and other trademarks are trademarks of BlueAnt and other organizations and may not be used without permission.

• The BlueAnt logo is registered with the U.S. Patent and Trademark Office and globally with the World Intellectual Property Organisation under the Madrid protocol.

Support

• For help and support, visit: support.blueantwireless.com
• Register your Pump Air Lite for updates: register.blueantwireless.com By using this product, you agree to the terms and conditions listed on the BlueAnt website: www.blueantwireless.com

Sweatproof

• The Pump Air Lite 2 earbuds are sweatproof, while the charging case is not. Please take care to avoid moisture and liquids, entering the charging case.

SAFETY INFORMATION AND WARRANTY TERMS

Important Safety Information

• PLEASE READ THIS ENTIRE DOCUMENT CAREFULLY, BECAUSE IT CONTAINS IMPORTANT INFORMATION ABOUT THE SAFE USE OF BLUEANT DEVICES ONLY CHARGE WHEN THE DEVICE IS CLEAN AND DRY WARNING – PROTECT YOUR HEARING BLUEANT DEVICES CAN REACH VOLUMES ABOVE 100 DECIBELS.
• PROLONGED USE AT HIGH VOLUMES MAY AFFECT YOUR HEARING CAPACITY AND MAY RESULT IN NOISE-INDUCED HEARING LOSS (NIHL).
• TURN OFF THE POWER TO YOUR DEVICE WHEN NOT IN USE.
• Please ensure that the device and any associated components such as ear gels or chargers, are stored safely and that any packaging or unwanted contents are disposed of thoughtfully.
• Do not place the product on the floor or leave it in a place, where young children could access it, or someone could trip over it

Using Ear Gels

• Your BlueAnt earbuds will come with ear gels or foam tips that are designed to provide a secure fit in your ear while providing high-quality audio
• Ear gels and tips are designed to sit comfortably in your ear and should not be forced into your ear at any time. If you have trouble fitting the ear gel or foam, please refer to the owner’s manual for correct insertion and usage information.
• Always make sure that the ear gel or foam is fitted securely to your device, before placing it in your ear.
• WARNING NOTE THAT NONCOMPLIANCE, MISUSE, OR FORCING THE EAR GEL OR FOAM MAY CAUSE DAMAGE TO YOUR EAR CANAL EARDRUM, OR MAY OTHERWISE CAUSE BODILY HARM

Care and Handling

• Your BlueAnt Bluetooth device is a precision-engineered instrument.
• To ensure its ongoing performance, you should look after it as you would any quality consumer electronic product, and use it under the instructions.
• BlueAnt recommends that you take the following precautions.
• Avoid leaving your device in direct sunlight, such as on the dashboard or console of a car or truck. Do not leave your device unattended in your vehicle.
• Do not leave your device, or use your device, in any area where the temperature may exceed 60 degrees Centigrade (140 degrees Fahrenheit), such as inside a closed car on a hot day. Remember that on a hot day, the temperature inside a closed car may be significantly higher than the outside air temperature.
• Do not leave your device, or use your device, in any area exposed to humidity, dust, soot, other foreign objects, smoke, or steam as this may cause your device to malfunction.
• Do not use any household or industrial-grade detergents or cleaners to clean your device. If your device becomes dirty or smeared, in most instances, a wipe with a dry or slightly damp cloth should be sufficient to clean it.
• Do not leave your Bluetooth device, plugged into a wall or car charger for long periods after it is fully charged. BlueAnt does not recommend long periods of continued charging.
• Before charging your BlueAnt device, make sure that the AC outlet, adaptor, and cable are not damaged. If you notice any abnormalities, seek advice from a qualified professional.
• If traveling internationally, ensure that your BlueAnt wall or car power adapter is approved for use in the country where you plan to use it and that the adapter voltage is suited to the local power supply.
• Should a fault develop with your BlueAnt product, contact BlueAnt for advice on how to proceed. Do not attempt to repair or alter any BlueAnt product yourself.

Approved Accessories

• The use of accessories not approved by BlueAnt, including but not limited to batteries, antennas, wall adapters, car chargers, ear gels, foam tips, and convertible covers, may cause your BlueAnt device to malfunction, or in the case of non-approved electrical accessories, may cause the device to exceed RF energy exposure guidelines. Use only 5V/1A chargers.
• Use of non-approved accessories will void your device’s warranty.
• For a list of approved BlueAnt accessories, visit our website www.blueantwireless.com

Electromagnetic Interference

• Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise for electromagnetic compatibility.
• Similiar to a mobile phone, your BlueAnt device is a low-power transmitter/ receiver and is covered by regulations in any facility where posted notices instruct you to do so.
• These facilities may include hospitals or healthcare facilities that may be using equipment that is sensitive to external RF energy.
• When instructed to do so, turn off your BlueAnt device when you board an aircraft. Any use of a mobile device must be under applicable laws, regulations, and airline crew instructions.
• Some Bluetooth devices may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer or physician to discuss alternatives.
• If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your doctor or physician may be able to assist you in obtaining this information.
• If you are in doubt whether your BueAnt device or mobile phone can be safely turned on or used, please consult an authorized person in the location you want to use your BlueAnt device.
• If no authorized person is available, or you remain uncertain, BlueAnt recommends that you turn off your Bluetooth device and any mobile phones unless they are required in an emergency.

BlueAnt Limited Global Warranty

• This product is covered by BlueAnt’s limited global warranty for one (1) year from the date of purchase by the first consumer purchaser of the product.
• Please refer to the warranty.blueantwireless.com for full terms and conditions.
• Register your BlueAnt product for warranty and new product updates at register.blueantwireless.com

AUSTRALIAN CONSUMER LAW

• Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
• You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure.
• For warranty and technical support, please email care@blueantwireless.com visit: www.blueantwireless.com, or call 1300 669 049
• BlueAnt Wireless Suite 6, 861 Doncaster East, VIC 3109, Australia

Caring for the Environment by Recycling

• Do not dispose of Bluetooth accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems are set up to handle electrical and electronic waste items and may prohibit or restrict how such items are disposed of. Check the laws and regulations for your areas to determine how to properly dispose of such items. Contact your regional authorities for more details.

HELP & SUPPORT

• Visit support.blueantwireless.com or email: care@blueantwireless.com
• Register your BlueAnt product for warranty and new product updates at: register. blueantwireless.com
• www.blueantwireless.com

Documents / Resources

| BlueAnt Pump Air Lite 2 True Wireless Earbuds [pdf] User Manual
Pump Air Lite 2 True Wireless Earbuds, Air Lite 2 True Wireless Earbuds, True Wireless Earbuds, Wireless Earbuds, Earbuds
---|---

References

• Product Registration – BlueAnt Wireless
• Support – BlueAnt Wireless
• WARRANTY – BlueAnt Wireless
• BlueAnt Wireless

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>