ZGZUXO T5 Baby Car Camera User Manual
- June 17, 2024
- ZGZUXO
Table of Contents
ZGZUXO T5 Baby Car Camera
Warm tips
- This user manual will explain in detail how to use, operation, technical specifications and precautions. Please read this manual carefully and fully understand it before use. Please keep this manual properly. We hope this product can meet your needs and serve you for a long time!
- Please use the car charger provided with the device for power supply. Otherwise, it may cause the device to malfunction or the output voltage to be too high, which may cause the device to burn out.
- Please remove the protective film on the lens and screen before use.
- Please pay attention to cleaning the surface of the lens. Use a slightly damp soft cloth to clean it before use to avoid poor shooting results.
- Do not use irritating chemicals, cleaning solvents, or detergents to clean this product. Please use a slightly damp soft cloth to wipe the product.
- Please do not attempt to open the casing or attempt to repair it yourself. If the product or any of its accessories are faulty, please go to a professional repair center for repair.
- Please pay attention to environmental protection and do not dispose of the product indiscriminately. Do not throw the product into a fire to avoid explosions.
- Do not place the product in a damp working environment. The product is not waterproof. Avoid getting the product wet or exposing it to rain.
- Do not use the product in an environment with high dust density to prevent the lens and other components from getting dusty and affecting the shooting effect.
Product Detail
- Spare port
- TF card slot
- Display screen
- Up/Record button
- Power/Menu button
- Down/Photograph button
- Reset hole
- Camera port
- Power port
- Microphone
- Foot pad
- IR light
- Camera
Illustration of Video Recording Interface
- Current mode is video recording
- Red dot flashing indicates recording in progress
- The current video file is locked
- Video resolution
- The set duration of loop recording
- Duration of the current recorded file
- Microphone is on
- Current date & time
- Memory card is inserted
- Power status display
Key Function Description
-
Power Menu button
- Function 1: Power On/Off
- Long press the power button to turn on the device when it is off.
- Long press the power button to turn off the device when it is on.
- Function 2: Menu
- Short press to enter the menu settings when in preview mode.
- Short press to confirm the menu option when in the menu.
-
Up/Record button
-
Function 1: Recording mode
Short press to start recording when in preview mode, and short press to stop recording during video mode. -
Function 2: Up option
Short press to move up the menu option when in the menu. -
Function 3: Exit menu mode
Long press to exit the menu mode when in the menu.
-
-
Down/Photograph button
-
Function 1: Camera mode
Short press to enter camera mode in preview mode. And then short press once to take a photo. -
Function 2: Down option
Short press to move down the menu option when in the menu. -
Function 3: One-key lock video
During recording, short press this button to lock the current video file, which will not be overwritten in the loop.
-
-
Reset hole (Hole can be seen in the Product Detail 07)
In case of abnormal conditions, use a slender tool to short press the reset hole to reset the device for rebooting.
Setup Description
-
Loop Recording
- Options: Off, 1 minute, 2 minutes, 3 minutes, 5 minutes.
- Off: Loop recording is not enabled.
The minute option represents the duration of each saved video segment.
(For example, after setting the loop recording for 2 minutes, clicking on the record button will activate loop recording. The recording will be divided into two-minute segments.)
-
Record Audio
- Options: Off, On.
- Indicating whether enable or disable the microphone recording function.
-
Date Stamp
- Options: Off, On.
- Indicating whether enable or disable the timestamps in video files.
-
Beep Sound
Options: 0-7, representing the volume level of the power button and key sounds. -
Screen Saver
- Options: Off, 3 minutes, 5 minutes, 10 minutes.
- Off means the screen is always on. The other options represent the waiting time for the screen to automatically turn off after stopping operation.
-
Date Time
You can adjust the date, time, and the order of displaying the date. The available setting items include date (year/month/day) and time (hour/minute/second. -
Language
Options: English, Traditional Chinese, Simplified Chinese, Japanese, French, German, Korean, Italian, Portuguese, Russian, Spanish, Thai. -
Format
- When you press the confirm button, a confirmation menu will pop up for formatting the TF card. Select “Confirm” to format the TF card.
- Select “Cancel” to exit the menu.
-
Default Setting
Perform a factory reset. Press the confirm button to bring up the option to restore the device to its factory default settings. Select “Confirm” to restore the factory settings. Select “Cancel” to exit the menu. -
Warranty
If you encounter any problems during use, you can scan the QR code in the image to contact us. -
Version
Check the firmware version information of the current device.
About TF Card
Please use a high-speed TF card (recommended U3 or above), the device requires
a capacity of 8GB or more, and supports up to a maxi- mum of 128GB. And please
insert the TF card before recording and format the card in the device after
turning it on.
Note: Do not insert or remove the TF card while the device is working.
- Insert the TF card in the correct direction (with the gold finger of the TF card facing the bottom of the device) until it is fixed in the card slot.
- Gently push down on it until it pops out, and then take it out when you need to remove the TF card.
- When you insert the TF card, the device will set it as the default storage device, and the data on the original TF card may not be readable.
- If the TF card is incompatible with the device, please try reinserting it or use another TF card to test.
Installation Instructions
- Turn off the car engine.
- Insert the TF card into the monitor’s card slot. For first-time use, you need to format the TF card.
- Insert the car charger into the car cigarette lighter. At the front of the car, you can ran the wire down and next to the center console.
- Strap the camera to your movable headrest of the vehicle, and pay attention to the direction when installing. Then though the video cable under the floor mat and up between the seats in the middle row. After installation, plug the rear connector of the video cable into the monitor’s camera port.
- Plug the monitor into the car power source and fix it in a position that does not affect the driver’s line of sight.
- Start the engine and check if the machine is installed correctly.
- Please check the display screen to see if the image is normal. If the display screen shows an inverted image, please contact us in time.
Installation Diagram:
Installation of the camera:
Introduction to the After-Sales Warranty Page
-
When you turn on the device for the first time or after performing a factory reset within the menu, you will see the following screen. You can scan the QR code and follow the prompts to proceed, or you can simply short press the power button to skip and enter the preview screen.
-
When you turn off the device for the first time or after performing a factory reset within the menu, you will see the following screen. It will disappear automatically and shut down after 15 seconds.
Customer Service
Upon activating the warranty, you will receive a one-year warranty from the date of purchase, as well as lifetime customer service support. If you encounter any issues with your product, please don’t hesitate to contact us via email at service@zgzuxo.com. We will respond to your inquiry within 24 working hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>