Aipower Technology AI-W28 Wearbuds Smart Watch User Guide
- June 15, 2024
- Aipower Technology
Table of Contents
Wearbuds Watch 2
Quick Start Guice
Product Description
Thank you for purchasing Wearbuds products, please read carefully before use this guide and keep it safe.
Product power on
-
Take the product out of the box, then press the position of the earphone, take out the earphone, Remove the tear film from the position of the charging thimble of the headset, and then put the headset back on the watch.”
-
Press and hold the right button of the product for 3 seconds, the watch will automatically turn on.Lead to connect (PS: If the watch is not turned on by long-pressing, you can connect the charging cable to Phone char ging for 2 hours)
Note: Every time you put the headset into the watch, you need to wipe the headset clean first, Make sure the ear phones are clean and dry.
Product charging
-
Charge the watch
Take out the charging cable, connect one end of the charging cable to the 5V adapter, and the other end to the watch. Above, there will be a charging icon on the watch after it is powered on.
-
Headphone charging
When the watch is fully charged, wipe the earphones with a dry cloth, put them in the watch, The watch will automatically charge the earphone, and the green light of the earphone is always on when charging.
APP download
Search “Wearbuds” in major app stores or scan the QR code below to download.
Product connection
-
Connect the watch to the mobile phone
Open the APP, register and log in to your Wearbuds account, follow the operating instructions of the APP Connect the watch. Once the connection is successful, you can view your daily exercise data on the APP, And you can receive push messages from your phone on your watch. -
Connect the headset to the mobile
After the watch is successfully connected to the mobile phone, take out both earphones from the watch and see the white light of the headset flashing rapidly., turn on the Bluetooth of the mobile phone system, search for the pairing named “Wearbuds watch 2” earphones, click to connect, after the connection is successful, it means that the earphones are connected to the hand The machine is connected successfully. -
Watch music play
When listening to watch music, take out the headset, and then slide the watch to play music interface (First, you need to manually copy MP3 songs into your watch), and connect your watch and headset,Click Play again to listen to the music in the watch.
Watch operation
Power on: In the off state, press and hold the right button for 3 seconds to
turn on the watch.
Power off: Press and hold the right button for 3 seconds in the power-on state
to power off the watch.
Headphone connection
- Enter the music playing interface and click the “More” button at the bottom right
- Click “Wireless earbuds” to enter the headset selection interface
- Select “Wearbuds Watch 2” to enter the connection interface
- Click “Connect” to connect
- If the connection is successful, the watch will display a prompt interface
Wearing headphones
Headphone Operation
Music transfer
- Prepare the music in MP3, WAV or FLAC format on the computer and turn off the watch;
- Connect the charging cable of the product to the watch, and then connect one end to the USB port of the computer;
- Find the SD card folder on the computer, then copy the music files directly, and then paste them into the folder directory;
- Unplug the charging cable, turn on the watch, and swipe to the music interface. You can see that the music has been stored in the watch. After connecting the headphones, click to play.
Warranty Policy
Precautions
- When the battery power is too low, please charge it in time to effectively protect the battery life.
- To avoid accidents caused by overheating of the device, do not charge the device in an environment above 50°C.
- The device uses a built-in battery to avoid damage to the device. Do not disassemble it by yourself.
- Do not subject the device to violent impact, puncture and collision to prevent battery damage and rupture. If the battery is ruptured, please avoid contact with eyes and skin. If the battery comes into contact with the skin, rinse immediately with water and send to the hospital.
- The measured data of this equipment are all reference data, please do not use it as a medical device.
- Put the earphones into the watch, the earphones will automatically shut down and charge, and when the earphones are taken out, the earphones will automatically turn on. However, when the power of the watch is exhausted, the headset will automatically turn on. At this time, it does not mean that the product is abnormal. Recharging the watch will return to normal.
- When charging, the red light of the earphone is always on, and the red light of the earphone is off, indicating that the battery is fully charged.
- To avoid abnormal charging and maintain product life, please keep the headset clean and dry before putting the headset on into the watch.
Product Warranty Policy
Our products have a 12-month warranty. If you encounter any problems during
the use of the product, please contact us by email:
support@myaipower.com. Our after-sales staff
will reply within 24 hours.
For more details, please visit:
myaipower.com/warranty
*Please note that Aipower can only provide after-sales service for products from its own official channels. as you products purchased from other channels, please contact the channel directly to obtain after-sales and warranty services.
FCC STATEMENT
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Federal Communication Commission lnterference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.0
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance.To maintain compliance with
FCC RF exposure compliance requirements, please follow operation instructions
as documented in this manual. This transmitter must not be co located or
operating in conjunction with any other antenna or transmitter.
The availability of some specific channels and/or operational frequency bands
are country dependent and are firmware programmed at the factory to match the
intended destination. The firmware setting is not accessible bythe end user.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>