Wee Bell WB100K Nursery Night Light User Manual
- June 17, 2024
- Wee Bell
Table of Contents
Wee Bell WB100K Nursery Night Light
Specifications
- Product Name : WeeBell Nursery Night Light
- Components: WeeBell, Nursery night light, Charge cable
- Battery: CR2032, lasts 5-6 months
Product Usage Instructions
Power On/Off:
- To power on the device, press the center of the main device.
- To power off, press and hold the button.
Connecting with WeeBell App
- Install the WeeBell app.
- Open the WeeBell app and register the device.
- Select and connect the sensor code of the device.
Nursery Night Light Function
The night light has mood light settings with brightness control. It indicates urine amount with blue light flashes.
Charging Indicator:
A red light indicates charging, and a green light indicates full charge.
Battery Replacement:
- Use the enclosed battery replacement peak to remove the hook joint.
- Replace the CR2032 battery and align the hook well to combine it back.
FAQ
- Q: How long does the battery last after replacement?
- A : The CR2032 battery can be used for 5-6 months after replacement.
- Q: Can the product be used for purposes other than its intended use?
- A : It is recommended not to use the product for anything other than its intended purpose to avoid damage.
Components
Learn more about products
How to use it?
APP
Register WeeBell with nursery night light
POWER
- ON: Press the button once / OFF: Press and hold the button
- After turning on the light, if you press the button twice in a row to enter pairing mode 1 2 green light is on
- While in pairing mode, until the green light of the cloud lamp flashes, Keep pressing the power supply on the Weebell
- One WeeBell is registered for one nursery night light
- Nursery night light notification works even app is turned off
Nursery night light function
State LED
Weebell attachment method
Should know
- In the case of feces with too low moisture content, the notification may not sound.
- For IOS, data reception may not be smooth when the app is in the background.
- If the light flashes, please open the app to check by proceeding with initialization.
- Run ‘Sensor Initialization’ in the ‘Device Connection Management’ menu of the app.
- You can use the app to power off the WeeBell. Press the power supply of the machine to turn it on again. Run a power off within the ‘Manage Device Connections’ menu of the app.
How to replace the battery
-
Using the enclosed battery replacement peak, follow the above procedure to remove the hook joint
-
Remove the lid from the back of the detached body and replace the battery
-
Start from the bottom, align the hook well, and then combine it
- The battery can be used for 5-6 months after replacement.
Safety Precautions and Product Specifications
- Do not use the product for anything other than its intended purpose. This can cause damage
- Do not disassemble or repair the product arbitrarily. This can cause failure and fire.
- Do not store the product in a hot place or near a firearm. The appearance may be deformed.
- Be careful not to get chemicals on the product.
- The product may be damaged and may be transferred to the human body.
- Watch out for falls, flooding, and shocks. The inside may be broken.
- Be careful not to let infants or pets wash or bite the product
- It is recommended to use this device for infants of 0-24 months, and if infants of 24 months o older use it, caution such as shock and disintegration is required.
- If the battery is replaced, there is a risk that the infant will swallow the battery replacement peak and the separated parts.
- Be sure to separate and store the main body and band out of reach of infants and toddlers.
Warranty
- We guarantee that this product is 100% genuine.
- Defects caused by consumer negligence (contamination, submersion, etc.) are excluded from the quality guarantee
- The warranty period for this product is 1 year, and A/S is provided for a fee or free of charge depending on the case.
FCC Statement
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Part 15.21|
Any changes or modifications (including the antennas) to this device that are
not expressly approved by the manufacturer may void the user’s authority to
operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF Radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>