TRENDTECH WE-Astrolite Bluetooth Speaker and Galaxy Projector User Manual

TRENDTECH WE-Astrolite Bluetooth Speaker and Galaxy Projector

Product Information

Specifications:

• Compliance: Part 15 of the FCC Rules
• RF Exposure: Meets general RF exposure requirement
• Usage: Portable exposure condition without restriction

Product Usage Instructions

FCC Statement:
This device complies with Part 15 of the FCC Rules. To ensure proper operation, please adhere to the following conditions:

1. This device should not cause harmful interference to other devices.
2. The device must accept any interference received, even if it leads to undesired operation.

Warning:
Any changes or modifications not approved by the responsible party for compliance may void the user’s authority to operate the equipment.

RF Warning Statement:
The device has been evaluated to meet general RF exposure requirements. You can use the device in portable exposure conditions without any restrictions.

FAQ

Q: Can I modify the device without approval?
A: No, any changes or modifications not approved may void your authority to operate the equipment.

Astrolite Button Functions

1. On/Off – Single click for Play or Pause. Long hold for power on/off.
2. Time: Single click for timer setting (30 mins, 60 mins, 90 mins, timer off). Long hold to enter/exit RGBW Nebula light cycle.
3. Vol -: Single click for next sound/song. Hold down to reduce volume.
4. Vol +: Single click for previous sound/song. Hold down to increase volume.
5. Model: Single click for on or to switch combined light mode. Hold down to turn off all lights in current mode. Double-click to switch to white noise/Bluetooth mode. You will hear a chime after switching modes. After switching to Bluetooth, open settings on your device, make sure Bluetooth is turned on, open the Bluetooth menu, and connect to the device listed as “Astrolite”. You will hear another chime to indicate the Astrolite is paired to your device.
6. RGB: Single click to turn on or switch the RGBW Nebula light (the light has eight colours: white, red, green, blue, yellow mix, purple mix, blue mix and white mix). Long press to turn off the RGBW Nebula light.
7. Laser: Single click to turn on or adjust the Stars from Blinking to Solid. Hold down to turn off Stars.
8. LED: Single click to turn on or adjust the brightness of the planet. Hold down to turn off the planet.

Remote Button Functions

All buttons function with a single click unless specified.

1. Power: Turn on/off.
2. Reverse arrow: Last sound/song.
3. Vol -: Hold to reduce volume.
4. Light bulb: turn off all lights.
5. Sleep: Set timer 30 min, 60 min, 90 min and timer off.
6. Sound Loop: Switches between continuous. Single sound or sounds loop (for white noise)
7. RGB Mode: Short press to switch colour mode. Long press to turn on/off RGB light.
8. RGB+: Increase RGB light brightness.
9. RGB-: decrease RGB light brightness.
10. Light mode: Changes the combined light mode.
11. Play mode: Switch between White noise and Bluetooth Single click to switch to Bluetooth. You will hear a chime after switching modes. After switching to Bluetooth, open settings on your device, make sure Bluetooth Is turned on, open the Bluetooth menu, and connect to the device listed as “Astrolite”. You will hear another chime to indicate the Astrolite is paired to your device.
12. Volume+: Hold to increase volume.
13. Forward arrow: Next sound/song.
14. Play or Pause.
15. Turn off all sounds.
16. RGB Mix: Enter/Exit RGBW Nebula light cycle mode.
17. Planet Mode: Turn on/off planet.
18. Stars Mode: switches between blinking stars or solid stars. Hold down to turn Stars on/off.
19. Planet: Make the planet brighter.
20. Planet-: Make the planet dimmer.
21. RGB Speed: changes the speed of movement of Nebula.

Specifications

1. Material: ABSIPC/PVC
2. Product colour: white
3. Voltage: 5V 2A
4. Laser light: 532nm
5. LED power: < 5W
6. Functions: With green laser light + projection light + Bluetooth speaker+ atmosphere light, with remote control, without battery, 1 M TYPE-C cable power supply
7. Speaker: 40 3W
8. Product size: 204134102mm
9. Product weight: 410G

Safety Rules

WARNING:
Bright Light. Avoid Exposure. Do not stare into the light. of which more, covered under water the product. Doing so may result in a complete breakdown of the product. All

To explore our full selection of products, visit us at Trendtechbrands.com. Go to Trendtechbrands.com to register your product.

• Must have Proof of Purchase.
• The product must not show signs of physical damage or water damage for warranty coverage.

Warranty

The Following Situations will void your 1-year Warranty:

• Improper use of the product under the instruction manual.
• Physical Damage
• Water Damage
• To explore our full selection of products, visit us at: Trendtechbrands.com.
• Go to Trendtechbrands to register your product.

Wireless Express declares that Radio Equipment ( BBC) Complies with Directive 2014/53/EU. The EU Deceleration of Conformity is available at: www.trendtechbrands.com This product, packaging and components may contain chemicals known in the state of California to cause cancer, birth defects or other reproductive harm. This notice is being provided per California Proposition 65.

WARNING:
Cancer and Reproductive Harm-www.P65Warnings.ca.gov.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Wireless Express Inc. 57 North Mall Plainview, NY 11803 United States of America.

Product Made in China.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>