Shopaholic KY-08 Transparent Wireless Keyboard User Manual

Shopaholic
Transparent wireless keyboard
USER MANUAL

Packing list

1. Shopaholic Transparent wireless keyboard * 1
2. Keyboard manual * 1
3. Certification of fitness * 1
4. Type-C Charging Cable * 1

Connection

When using the keyboard for the first time, please charge it for 3-4  hours to ensure sufficient power.

1. Turn on the keyboard power: Keep pressing the keyboard power button for 3 seconds. (CHRG light shows red and turns on for 3 second, then turns off )
2. Turn on the keyboard Bluetooth function: Press “ round button“ The PAIR light shows blue and keeps flashing.
3. Open Windows Settings – Devices – Bluetooth & Other Devices- Add Bluetooth or Other Devices- Bluetooth. Search for “Bluetooth keyboard” and click to connect.
4. Your device is ready to go and the PAIR light turns off. If the keyboard is not used for 10 minutes, it will automatically enter sleep mode. Press any key and wait for 2 to 3 seconds for the device to reconnect automatically.
5. This keyboard could connect three devices, follow below instrations. Press “Fn+1” for 3s, the indicator light will flash, follow the above steps to connect device 1; press “Fn+2″ for 3s to connect device 2; press “Fn+3” for 3 seconds to connect device 3.

Keyboard Features

Keyboard Overview Backlit Instruction

1. Make sure the keyboard is connected to the device.
2. Single press the backlight key to switch the 3 levels of backlight brightness.
3. Press the and or keys to switch between seven colors to adjust the backlight color.
4. When the battery power is lower than 20%, the backlight turns off by itself and should not be turned on.
5. Power on without any device connected, the keyboard enters breathing mode, 7-color cycle;
6. The pairing is successful and the breathing is closed, and the keyboard has no backlight at this time;
7. FN+RGB key: turn on or off breathing mode;
8. RGB key: turn on the backlight and switch the backlight brightness;
9. RGB key + up 7 (PageUp) or down J (PageDown): switch seven-color backlight;
10. The keyboard goes to sleep in ten minutes, records the state of the backlight during sleep, and restores the state of the backlight before sleep when it wakes up;
11. Low voltage automatically turns off the backlight. (For example, after the backlight is automatically turned off, you need to manually turn on the backlight when the battery is restored)

Note: You can change the brightness and switch colors only when the backlight is always on.
Charge

1. For the first use, please use the included charge cable to fully charge the keyboard (CHRG ligth turns green).
2. When charging, please check whether the charging port is powered normally.

Note: Please do not charge the keyboard for a long time. Keeping it plugged in for a long time will deplete the keyboard’s battery life.

Specifications

s6-10mA
Stand-by current| s1mA| Low battery alarm| 3.0-3.3V
Battery capacity| About 500mAh| Standby time| s180 days
Button life| 3 million taps| Battery Life| 2 years
Connection distance| slOm| Keystroke| 50-70g
Recharging current| s250mA| Charging port| Type C interface
Reconnect time| 2-3 seconds| Charging time| 2-3 hours
Pairing password| No| Wake-up time| s3 seconds
Number of keys| 78 keys| Operating temperatu| -10°C – 55°C

Cleaning and Care for the Keyboard

To keep your keyboard looking and working great, please maintain good usage habits and pay attention to protecting the keyboard.
Keyboard and Outer Cover Care
The keyboard is relatively thin and light. Please be careful not to use it on uneven surfaces to avoid bending the keyboard.
Don’ t apply liquids directly to the keyboard. Cleanoften in this way to keep your keyboard cover looking great.
Battery Care
Operating temperature: Keyboard is designed to work between 0°C to 35°C. Lithium batteries are sensitive to high temperatures, so keep your Surface out of the sun and don’ t leave it in a hot car.
Recharge anytime: The battery doesn’ t need to be empty or low before you recharge. You can recharge the battery whenever you like.
However, do not keep charging for a long time, it will decrease the battery life.

Troubleshooting

1. Why is my smartphone/tablet unable to find the keyboard in the Wireless search screen ?
   Please make sure you have pressed the connect button. You should see the status LED blinking in Blue. If the LED isn’t blinking, your device won’t find it.

2. Why can’t I type in Spanish,Japanese or other languages?
   The languages input setting is on your tablet. Our keyboard are standard US English and you will see there are only English letters printed on each button. If your device supports Spanish, the keyboard can also type in Spanish, but the position or some keys may be different.

3. Why can’t I type when the keyboard is paired?
   Please check the Input setting on your device to make sure all of the settings are set to ON status. If not, please turn them on.

Please kindly contact us timely if you meet with any problems, we will solve to you ASAP.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>