tp-link DS105G-M2 2.5G Multi-Gigabit Desktop Switch Installation Guide
- June 17, 2024
- tp-link
Table of Contents
tp-link DS105G-M2 2.5G Multi-Gigabit Desktop Switch
Panel Explanation
Power
On: Power on
Off: Power off
Kensington Security Slot
Secure the lock (not
provided) into the slot
to prevent the device
from being stolen.
Port LED
When one of the LEDs is on/flashing
On: Connecting to a device but no activity
Flashing: Transmitting or receiving data
Left LED (2.5G)
Green: Running at 2.5 Gbps
Flashing: Transmitting or receiving data
Port LED
Right LED (1G/100M)
Green: Running at 1 Gpbs
Yellow: Running at 100 Mbps
Flashing: Transmitting or receiving data
Note
For simplicity, we will take DS105G-M2 for example in this Guide
Connection
Specifications
Environmental and Physical Specifications
Frequently Asked Questions (FAQ)
Q1. The Power LED is not lit.
The Power LED should be lit when the power system is working normally. If the
Power LED is not lit, check as follows:
- A1: Make sure the power adapter is connected to the switch with the power source properly.
- A2: Make sure the voltage of the power supply meets the requirements of the input voltage of the switch.
- A3: Make sure the power source is ON.
Q2. The right and left LEDs are not lit when a device is connected to the
corresponding port.
It is recommended that you check the following items:
- A1: Make sure that the cable connectors are firmly plugged into the switch and the device.
- A2: Make sure the connected device is turned on and works normally.
- A3: The cable must be less than 100 meters long (328 feet).
To ask questions, find answers, and communicate with
TP-Link users or engineers, please visit https://community.tp-link.com to
join TP-Link Community
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
EU declaration of conformity
TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp- link.com/en/support/ce/.
UK declaration of conformity
TP-Link hereby declares that the device complies with the essential
requirements and other relevant provisions of the Electromagnetic
Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations
2016.
The original UK Declaration of Conformity may be found at https://www.tp-
link.com/support/ukca/
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use a damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- The adapter shall be installed near the equipment and shall be easily accessible.
- Place the device with its bottom surface downward.
- Please read and follow the above safety information when operating the device.
- We cannot guarantee that no accidents or damage will occur due to improper use of the device.
- Please use this product with care and operate at your own risk.