hansgrohe E 73013670 Tecturis Pillar Valve Projection 122mm Instruction Manual
- June 17, 2024
- hansgrohe
Table of Contents
hansgrohe E 73013670 Tecturis Pillar Valve Projection 122mm Instruction
Manual
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting
injuries.
The product may only be used for bathing, hygienic and body cleaning purposes.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
Technical Data
This mixer series-produced with EcoSmart (flow limiter)
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Dimensions (see page 19)
Flow diagram (see page 19)
Spare parts (see page 24)
Special accessories (order as an extra)
seal #98996000 (see page 20)
Cleaning (see page 27)
Operation (see page 27)
Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
Test certificate (see page 28)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>