DOSILKC CP8050LF Light Bulb Security Camera User Guide

DOSILKC CP8050LF Light Bulb Security Camera

Email: [email protected]

wi-Fi 2.4G / 5G
Before operating this unit, please read these instructions carefully, and save them for future use.

Interface description

This manual is suitable for various types of cameras. (The appearance may be different due to different batches. The details are subject to the receipt. This manual is only for the installation instructions of this series of equipment)

Description

Installation and placement

WIFI Bulb camera

Software Installation

APP Download and Installation
Users can search”EseeCloud(IP Pro, VR Cam)” on APP store or Google Play, or scan the QR code below to install the APP. Note: For iOS system, it requires iOS 9.0 version or above.For Android, Android 5.1 or above.

1. Step 1
   If you are prompted to open certain permissions (such as location, message notification, etc.) during APP installation, click Allow (agree).

2. Step 2

   • Account register : Open the APP, click”Register”, enter your email or phone number to create an account.
   • Account login : On the login interface, enter the account/ phone number/email, and the corresponding password, and click the “OK” button to log in.
   • Third-party login : APP supports third-party login. Click the third-party social software icon, jump to the APP to complete the authorization and log in.

Bluetooth adding process with network
*”Before adding a camera, please make sure that the Bluetooth function of the mobile phone has been turned on, and do not turn off the Bluetooth during the adding process. If a prompt box pops up during the adding process to enable Bluetooth or Bluetooth authorization, please follow the steps in the prompt to enable it;

1. Step 1
   After the camera is powered on, open the “EseeCloud “APP and click the “+” icor in the upper right corner to enter the interface of adding devices.
   (If the permission prompt pops up, click agree)

2. Step 2
   The APP will automatically search for a new device and click the Add button when it finds the device.
   (If you do not see the pop-up device box, please click “scan to add” to scan the QR code on the camera body)

3. Step 3
   Enter the WIFI name and password on the distribution network screen.

4. Step 4
   After the network is configured successfully, the system prompts you to enter the device name. Click Next.

5. Step 5
   Users can choose to enable or disable message push according to your own preferences (generally recommended to enable)Step 6 Congratulations, you have successfully connected the device.

6. Step 6
   Congratulations, you have successfully connected the device.

Or you can add camera by WiFi configuration

1. Step 1
   Open the APP, click the “+” icon in the middle of the interface to enter the scan code interface;

2. Step 2 Click “Camera scan code add” method

3. Step 3 Check whether the camera light is blinking

4. Step 4 Select the WiFi that the camera needs to connect to, enter the password, and click Next;

5. Step 5 Point the camera at the QR code that appears on the screen of the phone

6. Step 6 After the network configuration is successful, set a name for the camera.

Help FAQ

1. Q1: Why is the pairing network unsuccessful?
2. Please make sure that the distance among the camera, the router and the mobile phone should be close enough when configuring the network.
3. Please make sure that the WIFI signal connected to the mobile phone 2.4G Wifi and 5G WiFi are both ok.
4. Please check whether the WIFI name and password are correct.
5. Please long press the reset button for 5 seconds and try again after restoring the camera to the factory settings
6. Q2: Why is there no playback?
7. Make sure that the TF card has been inserted into the camera and try to turn on/off the camera.
8. Enter the camera settings menu to check the storage status ‘in good condition’ ( if the status is abnormal, click to “Format the memory card”.)
9. Q3: Why is the camera offline?
10. It may caused by router WIFI signal interference or network reasons. Power off and restart the optical modem, router or camera.
11. The camera maybe too far away from the WIFI router, try to get the camera next to the WIFl router.
12. Whether the WIFl password has been changed, try to reset the camera and try pairing again.
13. Q4: Why my phone does not have an alarm push function or two way audio?
14. Check your mobile phone permission settings, and make sure that enable the notification permission of “EseeCloud” App.
15. Open your phone’s Settings > Apps and Notifications, select Apps and Notification Management respectively, find the “EseeCloud” app, and turn on all permissions.

After Service

1. Thanks for your purchase and support, we appreciate all your valuable feedback.
2. If you have any questions about our products, please feel free to contact us.

Email: [email protected]

bulb camera use Instruction video

Documents / Resources

| DOSILKC CP8050LF Light Bulb Security Camera [pdf] User Guide
CP8050LF, CP8050LF Light Bulb Security Camera, Light Bulb Security Camera, Bulb Security Camera, Security Camera, Camera
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>