Jackery JS-200C 100W SolarSaga 200 User Guide

ModelJS-200C

The image is for reference only
USER GUIDE
Jackery SolarSaga 200

TECHNICAL PARAMETER

Unfold the bracket and place t on a flat surface. The design load s 1600Pa, and the safety factor s 1.5 times.
STC: AM=1.5; 25°C; 1000W /m2

CAUTION

• Please read the user guide first before using this product.
• Do not bend the folding solar panels.
• Do not place the folding solar panels n trees, buildings or other shaded areas for use.
• Do not immerse the folding solar panels n water or any other liquid.
• Do not put solar panels in water directly, and use a damp cloth to gently wipe them when cleaning.
• Do not use or store the folding solar panels near open flames or flammable materials.
• Do not scratch the folding solar panels with sharp objects.
• Do not put corrosive substances on the folding solar panels.
• Do not step on or place heavy objects on the folding solar panels.
• Do not disassemble the folding solar panels.
• The output circuit of folding solar panel package must be connected to the equipment properly, and reverse connection of positive and negative poles is strictly prohibited.
• Check the connection status of various components, wires, and plugs before use.
• It s strictly prohibited to drop the products due to the nature of the material. Otherwise, it may cause internal damage to the solar panel, rendering the product unusable.
• This product cannot be fixed for nstallation. Please put away the portable folding solar panels n case of strong winds, hail and other severe weather to avoid product damage or other hazards.
• Under normal circumstances, PV modules may be exposed to higher currents or voltages than under standard test conditions. Therefore, when calculating the rated voltage of component, the rated current of conductor, and the size of the control device connected to the PV output, it s required to multiply the short-circuit current (lsc) and open circuit voltage (Voe) values marked on the component by a factor of 1.25.
• Any damage to the product may ead to electric shock or fire.
• Do not let artificial spotlight shine directly on the solar modules or panels.

HOW TO USE
Tips: To support the full range of Jackery portable power stations, we have introduced the power cable equipped with a connector and adaptor.

1. DC7909 connector: suitable for the 8.0 mm DC input port of Jackery portable power stations.
2. DC7909-DC8020 adaptor: suitable for the 8.1mm DC nput port of Jackery portable power stations.

* DC7909 Connector

1. Unzip the carrying bag to take out the charging cable.
2. Unplug the adaptor from the power cable.
3. Connect the charging cable to the solar panel and the DC nput port of the portable power station.

* DC7909-DC8020 Adaptor

1. Unzip the carrying bag to take out the charging cable and plug it into the adaptor.
2. Connect the charging cable to the solar panel(s) and the DC input port of the portable power station.

To Use Solar Panel Connector

1. Unzip the carrying bag to take out the charging cable.
2. Connect the two power cables to the two nput ports of the solar generator connector.
3. Plug the output port into the DC input port of the portable power station.

• To maximize the power generation efficiency, adjust the direction of SolarSaga 200 to make sure the solar panel is exposed to direct sunlight.
• Depending on the type of portable power station, the SolarSaga solar panel connector is available as an option or as standard. For details on the giveaways of the different portable power stations, please consult the Jackery website and User Manual.

SUN ANGLE INDICATOR

The carry handle has a sun angle ndicator. When sunlight hits ts surface, a shadow will appear at its bottom.
If the shadow falls on the white inner circle at its bottom, it means that the solar panel is facing directly towards sun and you can get optimal power generation; f not, it is suggested to adjust its angle until it does.

WARRANTY

The product is covered by a limited warranty from Jackery for the original purchaser that covers the product from defects in workmanship and materials for 36 months from the date of purchase (damages from normal wear and tear, alteration, misuse, neglect, accident, service by anyone other than authorized service center, or act of God are not included ).
During the warranty period and upon verification of defects, this product will be replaced when returned with proper proof of purchase.

FREQUENTLY ASKED QUESTIONS

Q: What kind of battery can be charged by these solar modules?

1. Jackery Explorer series 2. Sealed lead-acid battery 3. Colloidal lead-acid batteries 4. The open ead-acid batteries

Q: How to clean the solar surface?

Dust and dirt on the surface should first be removed using a soft brush. Use a damp cloth to wipe the surface of the solar module to remove any remaining dust or dirt. Any guano or other adhesive should be removed as soon as possible from the solar surface to avoid a reduction n performance.

Q: Are the foldable solar modules waterproof?

To Maximize the lifespan of the module, t should not get wet.

CUSTOMER SERVICE

****36-month limited warranty
Lifetime technical support
  hello@jackerycom

CONTACT US

For any inquiries or comments concerning our products, please send an email to hello@jackery.com, and we will respond to you as soon as possible. If there s any quality-related issue with the product, you may request a replacement or refund by submitting a request form at www.jackery.com/support/.

Jackery Inc.
5310 Bunche Dr, Fremont, CA 94538
Tel:1-888-502-2236(US)
E-mail:hello@jackery.com
Website:www.jackery.com
380001000290

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>