COSTWAY HW58545 Storage Cabinet Instruction Manual
- June 17, 2024
- COSTWAY
Table of Contents
Storage Cabinet
HW58545/HW65638/JV11059
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
| Hardware List
A
| | x26| B| | x26
---|---|---|---|---|---
C| | x22| D| |
x2
E
|
4*30 mm
| x8| F|
3*12 mm
| x35
G| | x3| H|
3*14 mm
|
x6
I
|
2.5*10 mm
| x28| J| | x6
K|
4*12 mm
| x10| L| |
x5
M
| | x4| N| | x4
O| | x4| P|
4*40 mm
|
x4
Q
| | x2| R| | x2
S| |
x4
| | |
| Part List
1 x1
| 2 x1
| 3 x1
---|---|---
4 x1
| 5 x1
| 6 x1
7 x1
| 8 x1
| 9 x1
10 x1
| 11 x1
| 12 x1
13 x1
| 14 x1
| 15 x2
16 x2
| 17 x2
| 18 x2
19 x2
| |
| Part List Assembly Overview
| 01
E
| |
x8
---|---|---
x2
Attach Drawer Left & Right Panels (15 & 16) to Drawer Back Panel (17) by using Screw (E) as shown. Do not Overtighten.
Note: the groove on each panel is at the bottom.
| 02
A
| | x8| B| | x8
---|---|---|---|---|---
K| | x4| L| |
x2
x2
a)Screw In Cam-bolt (A) into designated holes on Drawer Front Panel (18).
b)Fit Bottom Panel (19) to Drawer Panels (15, 16 & 17) via groove on
respective drawer panels.
c)Align Cam-bolts on (18) to the holes on Drawer Side Panels and attach (18)
firmly. Check that front edge of Bottom Panel (19) fit into groove on the
inside-face of respective Front Panel (18).
d)Insert Cam-Lock (B) to the designated holes on Drawer Side Panels, then turn
clockwise to lock onto Cam-bolt. Do not overtighten.
e)Attach Handle (L) to (18) by using Handle Bolt (K).
| 03
A
| | x4| B| | x4
---|---|---|---|---|---
| C| |
x6
a) ) Screw in Cam-bolt (A) into designated holes on Bottom Pan.(11).
b) ) Insert Wood Dowel (C) to the designated holes on Bottom Ba and Front
Connect Bar (9 & 10).
c) ) Attach (9 & 10) to (11) via Cam-bolts and Wood Dowel
d) ) Insert Cam-Lock (B) to the designated holes on (9 & 10), the turn
clockwise to lock onto Cam-bolt. Do not overtighten.
| 04
F
|
3*12 mm
| x8| M| | x4
---|---|---|---|---|---
H|
3*14 mm
| x2| D| |
x1
a) Attach Plastic Glide (M) to Divide Panel (3) and Right Side Panel (4) by
using Screw (F).
b) Attach Magnetic Catch (D) to Divide Panel (3) by using Screw (H).
| 05
A
| | x8| B| | x8
---|---|---|---|---|---
C| | x10| P| |
x2
a) Screw in Cam-bolt (A) to the designated holes on Side Panels (2 & 4).
b) Insert Wood Dowel (C) to the designated holes on (3, 9, 10 & 11) as shown.
c) Attach Divide Panel (3) to Bottom Panel (11) via Wood Dowels, then fix by
using Screw (P). Do not overtighten.
d) Attach Side Panels (2 & 4) to (9, 10 & 11) via Cam-bolts and Wood Dowels.
e) Insert Cam-Lock (B) to the designated holes on (9, 10 & 11), then turn
clockwise to lock onto Cam-bolt. Do not overtighten.
| 06
A
| | x6
---|---|---
B| |
x6
C
| | x6
D| |
x1
H
|
3*14 mm
|
x2
a) Screw in Cam-bolt (A) to the designated holes on Top Panel (1).
b) Attach Magnetic Catch (D) to Top Panel (1) by using Screw (H).
c) Insert Wood Dowel (C) to the designated holes on (2, 3 & 4) as shown.
d) Attach Top Panel (1) to (2, 3 & 4) via Cam-bolts and Wood Dowels.
e) Insert Cam-Lock (B) to the designated holes on (2, 3 & 4), then turn
clockwise to lock onto Cam-bolt. Do not overtighten.
| 07
H
| | x2| I| | x28
---|---|---|---|---|---
Q| | x2| S| |
x2
a) Attach Back Panel (12, 13 & 14) by using Screw (I).
b) Attach Belt (Q) to top middle hole on (12 & 14) with Flat Washer (S) and
Screw (H).
| 08
|
F
|
3*12 mm
| x27
---|---|---|---
G| | x3| J| |
x6
K
| | x6| L| |
x3
a) Attach Hinge (J) and Magnetic Bar (G) to Door (6, 7 & 8) by using Screw (F)
as shown.
b) Attach Door (6, 7 & 8) to cabinet by using Screw (F) as shown.
c) Attach Handle (L) to Doors (6, 7 & 8) by using Handle Bolt (K).
| 09
O
| |
x 4
---|---|---
Insert Shelf Pin (O) and place Adjustable Shelf (5) on it.
| 10
N
| |
x4
---|---|---
Insert drawers and Put Stopper (N) into the designated hole on Drawer Side Panels. The assembly of the Storage Cabinet unit is complete.
Important: Before inserting Stopper (N), check that the hole does not pass the front end of Plastic Glide (M).
P
| | x2
---|---|---
R| |
x2
S| | x2
- WALL
a) ) Drill two holes in the dry wall per the length and diameter Plastic
Anchor (R).
b) ) Press (R) into the respective drilled hole
Ensure that each anchor fits securely in the wall.
c) Drive Screw (P) through Flat Washer (S) and Belt (Q) into t screw hole on
(R) to secure the unit to the wall.
Return / Damage Claim Instructions
DO NOT discard the box / original packaging.
In case a return is required, the item must be returned in original box.
Without this your return will not be accepted.
Take a photo of the box markings.
A photo of the markings (text) on the side of the box is required in case a
part is needed for replacement. This helps our staff identify your product
number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your
replacement or refund processed quickly. Please make sure you have the box
even if it is damaged.
Send us an email with the images requested.
Email us directly from marketplace where your item was purchased with the
attached images and a description of your claim.
USA office: Fontana AUS office: Truganina ITA office:
Milano POL office: Gdańsk
DEU office: FDS GmbH, Neuer Höltigbaum 36, 22143 Hamburg, Deutschland
FRA office: Saint Vigor d’Ymonville
GBR office: FDS Corporation Limited,Unit 4, Blackacre Road, Great
Blakenham,Ipswich, Ip6 0FL,United Kingdom
If you’re having difficulty, our friendly customer team is always here to help.
USA: cs.us@costway.com POL:
sklep@costway.com
AUS: cs.au@costway.com DEU:
cs.de@costway.com
GBR: cs.uk@costway.com FRA:
cs.fr@costway.com
ITA: cs.it@costway.com ESP:
cs.es@costway.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>