BULOVA COMPUTRON 97C110 Mens Watch Owner’s Manual
- June 13, 2024
- Bulova
Table of Contents
COMPUTRON 97C110 Mens Watch
Owner’s Manual
COMPUTRON 97C110 Mens Watch
Features
➢ Four digits LED display: hour, minute, second, month, date, day.
➢ 12/24 hour format.
➢ 81 years fully automatic calendar (from 2019 to 2099).
➢ Dual time.
Operation Manual
➢ In
the Screen Off Mode, press B key to display the normal time first.
➢ In Normal Time Mode, press B to shift the display mode: hour, minute,
second, date, day and T2 (dual zone) time.
➢ If there is no key operation for 5 seconds, it will enter into the Screen
Off Mode automatically.
-
Time and Date Setting
➢ In the Normal Time Mode, press (using the tip of a pen or other sharp object) and hold A key for 3 seconds to enter the setting mode, and then press the A key to move the flashing item as follows:
➢ When 12 or 24 flashes, press B key
to select 12 or 24 hour format.
➢ Press B key to increase value, press and hold B key to increase the value quickly.
➢ When setting seconds, press B key to reset the seconds to “00”.
➢ In setting mode, if there is no key operation for 10 seconds, it will return to the Normal Time Mode. -
Date Setting
➢ In the date mode, press and hold the A key for 3 seconds to enter the setting mode, and then press A key to move flashing item as follows:
➢ Press
B key to increase the value, press and hold B key to increase the value
quickly.
➢ In the setting mode, if there is no key operation for 10 seconds, it will return to date mode. -
T2 Time Setting
➢ In the T2 Time Mode, press and hold the A key for 3 seconds to enter the setting, and then press the A key to move the flashing item as follows:
➢
Press B key to increase the value, press and hold B key to increase the value
quickly.
➢ In the setting mode, if there is no key operation for 10 seconds, it will return to T2 Time Mode.
Note: Press A key and B key at the same time can display all the LEDs. If
keys are not pressed, the display will return to the original mode.
➢ Normal time default: AM12:00 00
➢ Date default: January 1st, 2019
➢ T2 time default: AM6:00 00
➢ The day is shown as below.
Specification
➢ Module Size: 27.2*25.5mm
➢ Module Thickness: 9.00mm
➢ Operational Temperature Range: -10°C—+60°C
➢ Operational Voltage: 3.0V
➢ Accuracy: ±30sec/month
➢ Battery Code and Capacity: CR2032 (220mAh)
➢ Average Static Current: fl.43uA (static maximum current: 10.68 u A)
➢ LED Illumination Average Current: 527.91mA (LED light maximum current: 35.00
mA)
➢ Battery Life (85%): 24 months
(Battery life is calculated according to LED illumination of 5 times a day and
3 seconds per time, for a total of 15 seconds per day).