RADLEY LONDON S21 Smartwatch User Guide
- June 15, 2024
- RADLEY LONDON
Table of Contents
series 21 – getting started
User Guide
S21 Smartwatch
Please take a few minutes to read through these instructions, they will help ensure you get the best from your smartwatch. You can also visit our website or scan this QR code for lots of helpful information and video guides. And of course, if you have any questions, please get in touch, we’re here to help!
https://www.radley.co.uk/smart-watches-instructions/
+44 (0)121 524 1400
radleywatches@peershardy.co.uk
www.radley.co.uk/smart-watches-instructions/
HOW TO CHARGE
- Please charge your smartwatch when it displays low battery warning.
- Connect the charger to the back of the smartwatch via the 2 magnetic charge points at the bottom of the case.
- Switch on power, charging will begin.
- Please charge the band when it displays low battery.
- A 2 hour charge time is sufficient to fully charge your smartwatch. Please take care not to overcharge.
OPERATION INTRODUCTION
- Press & hold the crown for 3+ seconds to turn your smartwatch ON or OFF.
- You can also tap the POWER OFF icon within the menus, confirm your selection when prompted and your smartwatch will switch off.
SELECTING YOUR DISPLAY Your smartwatch has a number of our signature dials, to switch between them press & hold the screen and swipe left or right to view. Once you have selected your dial, tap to set. Alternatively, you can access your dials by tapping on the dial icon on the APP homepage.
SHORTCUTS
Do not disturb will turn off all reminders except alarms.
Tap on the ‘About’ to see the bluetooth address and software version of your
smartwatch.
Screen brightness
Settings
Turn off your smartwatch
NOTIFICATIONS
Swipe from left to right on the dial interface to view notifications such as
incoming calls, text messages, WhatsApp, Facebook, Twitter, etc., and delete
them automatically after reading.
OWNLOADING THE RADLEY LONDON App.
To download our app, search for RADLEY LONDON App. or scan the appropriate QR
code for installation. Use your smart phone camera or QR code reader app.
COMPATIBILITY
The RADLEY LONDON app will work on the following smartphones:
- Android (version 4.4 and above)
- Apple IOS (version 8.0 and above)
Please ensure the app is the latest version and have Bluetooth 5.0
CONNECTING BAND TO MOBILE PHONE
- Enable Bluetooth on your smart phone.
- Open the RADLEY LONDON App. on your smart phone.
- Review and accept privacy policy.
- Set your profile following the steps presented.
- Set your goals following the steps presented.
- To connect your watch, tap the green icon & select your watch from the list.
- Tap OK to allow notifications to appear on your smartwatch.
DISCONNECTING YOUR SMART WATCH & PHONE
- Open the RADLEY LONDON App. on your smart phone.
- Tap disconnect device in Settings.
- Forget your device on your smart phones Bluetooth settings.
MENU SCREEN
When the
watch face is displayed, swipe right on the watch face to enter and view the
menu screen.
SPORTS Tap the sport
icon to enter ‘multi sport mode’.
To end sport mode and save the sports data simply swipe right on the screen
and press the stop icon.
A reminder will pop up when you have reached your set goal.
HEART RATE MONITOR Tap this icon to monitor your current heart rate. To
exit the heart rate monitor swipe right on the screen.
BLOOD OXYGEN MONITOR
Tap this icon to monitor your current blood oxygen level. To exit the blood
oxygen monitor swipe right on the screen.
SLEEP MONITOR Monitor your sleep automatically between 9:00 p.m. and 9:00
a.m.
WEATHER Display the weather when the smartwatch connected to RADLEY
LONDON APP.
SHUTTER Take pictures remotely from your smart watch.
SEDENTARY REMINDERS
Turn on the sedentary reminder you’ve set in the RADLEY LONDON app. Your watch
will vibrate to remind you to take a little excercise.
MUSIC CONTROL Click the music icon to enter the music playback control
interface. You can select previous/next song, and play/pause music. From here
you can also control the volume.
SETTINGS Find
phone: Find your smartphone.
Brightness:Tap here to adjust (+/-) the screen brightness.
Screen off: Change how long the screen stays on for.
Dial switch: Swipe left and right to select your favourite dial.
Language: Set the language.
Menu style: Choose between list view and grid view.
Do not disturb: Switching this on will lower your brightness and will turn off
the ‘raise your hand to wake up the screen’ feature. All reminders will also
be disabled except for the alarm clock.
System information: Find the BT address and software version of your
Smartwatch.
Reset: This will clear all data on the watch.
Power off: Switch off your smartwatch.
HOW TO CARE FOR YOUR SMART WATCH
Do not wear your smartwatch whilst applying sprays or creams. Do not allow
contact with any corrosive agent e.g. paint, solvents or adhesives, as this
may affect the finish of the smartwatch. IP68 standard guarantees water
resistance for 30 minutes up to a maximum water depth of 1.5 metres. We do not
recommend our watches for use in saltwater. Always rinse your smartwatch after
swimming.
STRAP CARE
Environmental conditions can affect the durability of your strap. Please treat
it with care and limit exposure to direct heat or sunlight. Keep your watch
dry and away from wet surfaces. Do not use chemical cleaners on your strap and
avoid contact with cosmetic products, such as fake tan or perfumes. Light
soiling can be cleaned using a weak soapy water solution on a barely damp soft
cloth. Please be aware light coloured straps i.e. whites, creams and pastel
colours, are prone to attract colour transfer from other surface materials and
cosmetic substances. Please take care whilst wearing these products as
discolouration of straps is not covered within the guarantee.
SILICONE STRAP CARE
To keep your silicone strap looking good, clean it regularly with mild soap
and water to remove any dirt, oils, lotions etc., ensuring the case of your
smartwatch does not get wet. When you are not wearing your smartwatch, we
recommend you store it in the gift box received with purchase.
STEP COUNTER
Smartwatches use multiaxis inertial sensors called accelerometers. These
detect wrist movement in order to measure steps. However, some wrist actions
whilst standing or sitting can mimic the arm movement of a step and can
therefore falsely record steps. The step count recorded each day should be
used as a guide only.
GUARANTEE
Quality and style are at the heart of what we do. RADLEY certifies this
smartwatch is produced using premium materials and is fully tested before
leaving our manufacturing centre.
Your RADLEY smartwatch is guaranteed against any defective parts and
construction for 2 years from the date of purchase. Your guarantee is only
valid if you present your original receipt when returning the item. This
guarantee provides you with rights in addition to your consumer statutory
rights and therefore does not limit your statutory rights. Please note this
guarantee does not cover lenses, bands, straps or bracelets, water penetration
or batteries. Additionally, breakages caused by accident or maltreatment are
not covered.
All products should be returned to: PH Services, Precision House, Unit 4,
Starley Way, Solihull, B37 7GN.
Please contact us before sending in your product and we’ll guide you through
the process.
CONTACT US
If you require any further assistance using your RADLEY smartwatch or our
RADLEY LONDON App we are here to help!
You can also contact the RADLEY customer service team Monday to Friday, 9AM to
4PM on:
+44 (0) 121 524 1400
radleywatches@peershardy.co.uk
There is also lots of information on our website https://www.radley.co.uk
/smart-watches-instructions/ that you may find helpful.
PRIVACY POLICY
Please check https://www.radley.co.uk/smartwatchprivacypolicy/ to view our
privacy policy. Please remember to check for updates periodically.
IMPORTANT SAFETY INFORMATION – BEFORE USING THE PRODUCT, PLEASE
FAMILIARISE YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR
USE!
BATTERY WARNINGS Do not attempt to replace the battery, open the device
enclosure or disassemble your RADLEY product. Doing so can result in a safety
hazard
- The integrated rechargeable battery cannot be removed or replaced
- Substances within RADLEY smartwatch battery may harm the environment or cause injury if handled or disposed of improperly. In the unlikely event of contact with battery acid, thoroughly flush the affected area with plenty of clean water and seek IMMEDIATE medical attention
- When the battery is fully charged disconnect from charger, DO NOT exceed 2 hour charge time. DEVICE WARNINGS This is a Class A product. In a domestic environment, this product may cause radio interference. In which case the user may be required to take adequate measures
- Ensure your smartwatch correctly engages with the charging contacts
- Before each use, please check the product for damage, do not use if the product is damaged
- This is not a toy, children should not play with this product
- Never attempt to open your smartwatch, this may result in danger
- Protect the product from strong impacts, vibrations, direct sunlight and dirt
- Do not place heavy objects on the product
- Do not exert pressure on the product
- Avoid strong magnetic fields e.g. loudspeakers
- Salt and thermal water can lead to the corrosion of metal parts. Remove the product before using saunas as the temperature difference can cause condensation
- Do not operate the product near heat sources e.g. radiators or other devices emitting heat. Do not cover the product during operation or charging
- Never use the product on aeroplanes, in hospitals, service rooms, or near medical electronic systems. The wireless signals transmitted could impact the functionality of sensitive electronics
- Do not use your RADLEY product if the display is cracked
- Do not expose your RADLEY product to extremely high or low temperatures
- Do not use abrasive cleaners to clean your RADLEY product
- Remove your RADLEY product immediately if it feels warm or hot
- Do not attempt to wear or operate your RADLEY product whilst charging
- Do not charge your RADLEY product if wet
- Do not check notifications or other applications on the products display while driving or in other situations where distractions could be hazardous. Always be aware of your surroundings when using RADLEY products and services
- Ensure your smartwatch is removed at regular intervals for gentle cleaning.
HEALTH WARNINGS RADLEY smartwatches contain components that emit electromagnetic fields, with some of the models containing a magnetic charging dock, please be aware that these models contain magnets. These electromagnetic fields and magnets may interfere with medical devices, such as pacemakers and implanted defibrillators. Please consult your doctor and medical device manufacturer if you use any medical device before using a RADLEY smartwatch
- The RADLEY heart rate monitor is designed for recreational use only, it is not intended for any medical use such as diagnosing or monitoring any medical conditions
- The RADLEY heart rate monitor periodically emits flashing lights, please consult your doctor before use if you have epilepsy or similar conditions.
- The RADLEY heart rate monitor usually provides an accurate estimate of your heart rate, but the reading can be affected by factors such as fit of the smartwatch, the physical characteristics of the wearer and the intensity of the activity
- Your RADLEY smartwatch will help calculate distances covered and calories burned during training. Please consult a doctor before starting new exercise regimes
- RADLEY smartwatches contain sensors to track your movement to closely estimate your activity, sleep, calories used etc. These close estimations are not always fully accurate
- Some wearers may suffer skin irritation if the smartwatch is worn for prolonged periods, especially if you suffer from sensitive skin or have allergies. If you notice any irritation you should remove your smartwatch. To help prevent any irritation please ensure the smartwatch is removed regularly for cleaning & do not over-tighten on your wrist
- We recommend you remove your smartwatch each day for gentle cleaning.
DISPOSAL OF GOODS ‹ The crossed out wheelie bin symbol is to remind you that waste electrical products, batteries and accumulators should not be disposed of in household waste. If you are unable to reuse or recycle your article it should be disposed of at a civic amenity site or a local authority recycling facility.
- Do not dispose of your RADLEY product within household waste.
- Disposal of your RADLEY packaging and product should be done in accordance with local regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>