BOSCH SMS4HTW00E Dishwasher User Guide

BOSCH SMS4HTW00E Dishwasher

Product Specifications

• Water Hardness Settings: Soft, Medium, Hard
• Special Salt Dispenser
• Rinse Aid Dispenser
• Programmes: Normal, Eco, Quick, Silence 50, Machine Care, Favourite
• Detergent Dispenser
• Energy Consumption: Varies per programme
• Water Consumption: Varies per programme

Product Usage Instructions

Setting up Home Connect:

1. Install the Home Connect app on your mobile device and follow the instructions.
2. Scan the QR code with the Home Connect app.

Water Hardness Settings:
Adjust the water hardness settings based on your location’s water hardness values. Follow the instructions in the manual to set the appropriate level.

Adding Special Salt

1. Unscrew the lid of the special salt dispenser.
2. Fill the dispenser with special salt just before starting a programme.
3. Place the lid back on and close securely.

Adding Rinse Aid

1. Press the catch on the lid of the rinse aid dispenser to open.
2. Add rinse aid up to the maximum mark.
3. Close the lid securely.

Using Programmes:
Select the appropriate programme based on your needs. Refer to the manual for details on each programme’s duration, energy consumption, and water usage.

How to Use Your Appliance

1. Load tableware suitable for dishwashers.
2. Add detergent to the detergent dispenser.
3. Switch on the appliance.
4. Select and start the desired programme.
5. Remove tableware at the end of the programme.
6. To cancel a programme, press and hold the cancel button for approximately 4 seconds.

Cleaning Filters:
After each wash, check and clean the filters to ensure optimal performance. Refer to the manual for detailed filter cleaning instructions.

Frequently Asked Questions (FAQ):

• Q: How often should I refill the rinse aid dispenser?
  A: Refill the rinse aid dispenser when it is close to empty or as indicated by the appliance.

• Q: Can I use regular salt instead of special salt?
  A: No, only use special salt designed for dishwashers to avoid damage to the appliance.

Before using for the first time, read the instruction manual and the safety information it contains.

Setting up Home Connect

Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.

1. Install the Home Connect app on your mobile device and follow the instructions.
2. Scan the QR code with the Home Connect   app.

Overview of water hardness settings

You can find an overview of the water hardness values that can be selected here.
A table of country-specific units can be found in the instruction manual.

Setting the water softening system

1. Press ⁠.

2. To open the basic settings, press for 3 seconds.

   • The display shows Hxx.
   • The display shows SET.
     

3. Press SART repeatedly until the right water hardness has been set.

4. To save the settings, press Setup 3 sec. for 3 seconds.

Adding special salt
To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts.

1. Unscrew the lid of the dispenser for special salt and remove.
2. On initial start-up: Fill the dispenser right up with water.
3. Add the special salt to the dispenser. The water in the dispenser is displaced and forced out. Never add de- tergent.
4. Place the lid back on the dispenser and turn to close.

Adding rinse aid

1. Press the catch on the lid of the dispenser for rinse aid 1 and 2  lift ⁠.
2. Add rinse aid up to the max mark.
3. Close the lid of the dispenser for rinse aid. aThe lid clicks into position.

Adding detergent

1. Add the detergent to the dry detergent dispenser.
2. Close the lid of the deter- gent dispenser.
   The lid clicks into position.

Programmes

• The programme data has been meas-ured in the laboratory according to European standard EN 60436.
• The consumption figures depend on the programme and additional func-tion selected.
• The running time will change if the rinse aid system is switched off or rinse aid needs to be added.

How to use your appliance

1. Load the tableware.
   Only clean tableware that is suitable for dish-washers. Remove large remnants of food from the tableware. Check that the spray arms can ro- tate freely.

2. Add detergent.

3. Switch on the appliance ⁠.

4. Select the programme.

5. Start the programme start.

6. Remove the tableware at the end of the pro- gramme.

7. To cancel the programme, press reset 4 sec for approx. 4 seconds.

The programme is cancelled and ends after ap-prox. 1 minute.

Cleaning filters

1. After each wash check the filters for residue.
2. Turn the coarse filter anticlock-wise 1 and re-move the filter system 2  ⁠.
3. Pull down the micro filter to re-move.
4. Press the locking catches 1 to-gether and lift the coarse filter out ⁠2 .
5. Clean the filter elements under running water.
6. Re-assemble the filter system.
7. Insert the filter system into the appliance and turn the coarse filter clockwise. Make sure that the arrow markings match up.

Cleaning spray arms

1. Unscrew the upper spray arm 1 and pull down to remove ⁠2 .

2. Pull up the lower spray arm to remove.

3. Check the outlet nozzles on the spray arms for blockages un- der running water and remove any foreign bodies.

4. Insert the lower spray arm.
   The spray arm clicks into position.

5. Insert the upper spray arm and screw it firmly in place.

Clean wastewater pump

1. Disconnect the appliance from the power supply.

2. Remove the filter system.

3. Scoop out any water.

4. Prise off the pump cover using a spoon and grip it by the crosspiece.

5. Lift the pump cover inwards at an angle and remove.

6. Remove any remnants of food and foreign bodies in the area of the impeller.

7. Insert the pump cover 1 and press down 2 ⁠.
   The pump cover clicks into position.

8. Install the filter system.

Troubleshooting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>