taurus SPCL400 Textile Care Hygienic User Manual

: June 17, 2024
: taurus

Table of Contents

taurus SPCL400 Textile Care Hygienic
Product Usage Instructions
Usage:
Instructions for use
DESCRIPTION
USE AND CARE
INSTRUCTIONS FOR USE
CLEANING
EMPTYING THE DIRTY WATER TANK:
TROUBLESHOOTING
WARRANTY AND TECHNICAL ASSISTANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

taurus SPCL400 Textile Care Hygienic

Textile Care Hygienic SPCL400

Specifications :

Water spray button (A)
Carrying handle (B)
On/off button (C)
Clean water tank (D)
Dirty water tank (E)
Hose (F)
Water suction nozzle (G)
Nozzle release button (H)
Power cord storage (I)
Plug (J)
2 in 1 crevice tool holder (K)
Silicone brush (L)
Hard brush (M)
2-in-1 crevice tool (N)

Product Usage Instructions

Notes Before Use:
Ensure that you have removed all packaging material from the product. Confirm that the device and all accessories are included and correct.

Usage:

Fully extend the power cord before plugging in.
Remove the hose (F) from the body of the appliance and assemble the water suction nozzle (G) or 2 in 1 crevice tool (N).
Fill the clean water tank (D) up to the maximum level.
Add detergent
(IMPORTANT) : do not use detergents that generate foam).
Plug in the appliance.
Switch the appliance on by pressing the on/off button (C).
Stop the appliance by pressing the on/off button (C) again.

After Use:
Unplug the appliance from the mains. Empty the dirty water tank (E). Collect the power cord, hose, and accessories.
Cleaning :
Unplug the appliance from the mains and allow it to cool down before cleaning. Do not use solvents, products with an acid or basic pH factor such as bleach, or abrasive products to clean the appliance. Do not allow water or other liquids to enter through the ventilation openings to prevent damage to the internal working parts of the appliance. Do not immerse the appliance in water or any other liquid, nor put it under the tap.
Emptying the Dirty Water Tank:
Empty the dirty water tank (E) at the end of each use. Remove the dirty water tank by pulling the handle upwards. Open the lid and pour the liquid into a suitable place. If the dirty water exceeds the maximum level during use, stop operation immediately and empty the tank before further use.
Emptying the Fresh Water Tank:
Empty the fresh water tank (D) at the end of each use. Remove the fresh water tank by pulling the handle upwards. Open the lid and pour the liquid into a suitable place.
Cleaning the Suction Nozzles:
Separate the nozzle from the hose by pressing the button (H). Wash the suction nozzle with water. Re-install the nozzle, tightening it until it clicks into place.

FAQ:

Q: What do I do if the appliance does not work?
A: Check if the motor thermostat has tripped. Ensure there are no obstructions and clean the filter grille.
Q: How do I resolve issues with water dispensing?
A: Ensure no contact between the nozzle and surface. Check for dirt or residue in the filter grille.
Q: What should I do if air is trapped between the pump and hose?
A: Turn on the appliance, prime the pump by lowering the hose to the floor, and hold down the trigger for 1 minute.

Textile Care Hygienic SPCL400

Instructions for use

taurus-SPCL400-Textile-Care-Hygienic-image-02

DESCRIPTION

A Water spray button
B Carrying handle
C On/off button
D Clean water tank
E Dirty water tank
F Hose
G Water suction nozzle
H Nozzle release button
I Power cord storage
J Plug
K 2 en 1 crevice tool holder
L Silicone brush
M Hard brush
N 2-in-1 crevice tool

USE AND CARE

Before each use, fully extend the power cord of the appliance.
Do not use the appliance if its accessories are not properly attached.
Do not use the appliance if the accessories attached to it are defective. Replace them immediately.
Do not use the appliance if its start/stop device does not work.
Do not use detergent that generates foam.
Do not use the appliance without putting the dirty and clean water tanks correctly.
Keep this appliance out of the reach of children and/or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge.
Do not operate in areas containing metal objects such as nails and/or screws.
Never vacuum incandescent or sharp objects (cigarette butts, ashes, nails…).
Do not use the appliance on pets or animals. Keep the appliance in good condition. Check that moving parts are not disassembled or jammed, that there are no broken parts or other conditions that may affect the proper functioning of the appliance.

INSTRUCTIONS FOR USE

NOTES BEFORE USE:

Ensure that you have removed all packaging material from the product.
Confirm that the device and all accessories are included and correct.

USE :

Fully extend the power cord before plugging in. Remove the hose (F) from the body of the appliance, assembly the water suction nozzle (G) or 2 in 1 crevice tool (N).
Filling the clean water tank (D) up to the maximum level.
Add the detergent
(IMPORTANT) : do not use detergents that generate foam).
Plug in the appliance.
Switch the appliance on by pressing the on/off button (C).
Stop the appliance by pressing the on/off button (C) again.
AFTER THE DEVICE HAS BEEN USED : Unplug the appliance from the mains.
Empty the dirty water tank (E).
Collect the power cord, hose and accessories.

CLEANING

Unplug the appliance from the mains and allow it to cool down before cleaning.
Do not use solvents, products with an acid or basic pH factor such as bleach, or abrasive products to clean the appliance.
Do not allow water or other liquids to enter through the ventilation openings to prevent damage to the internal working parts of the appliance.
Do not immerse the appliance in water or any other liquid, nor put it under the tap.

EMPTYING THE DIRTY WATER TANK:

Empty the dirty water tank (E) at the end of each use.
Remove the dirty water tank by pulling the handle upwards.
Open the lid and pour the liquid into a suitable place.
During use, if the dirty water in the tank exceeds the maximum level, stop operation immediately and empty the dirty water tank before using the appliance.

EMPTYING THE FRESH WATER TANK:

Empty the fresh water tank (D) at the end of each use.
Remove the fresh water tank by pulling the handle upwards.
Open the lid and pour the liquid into a suitable place.

CLEANING THE SUCTION NOZZLES:

Separate the nozzle from the hose by pressing the button (H).
Wash the suction nozzle with water.
Re-install the nozzle, tightening it until it clicks into place.
CLEANING THE DIRTY WATER TANK FILTER:
Pull the handle to release the dirty water tank. Remove dirt and debris from the filter screen located under the dirty water tank.

CONSUMABLES:

You can purchase consumables (e.g. brush, nozzle) from the official Taurus website.
Always use original consumables, specifically designed for your appliance model.

TROUBLESHOOTING

PROBLEM	CAUSA	SOLUTION
The device does not work	The power cord is not plugged in.	Check that the

power cord is plugged in.
The motor thermostat may have tripped.| Unplug the unit. Check the appliance for blockages and clean the filter screen.
The device does not vacuum| The nozzle must not be in contact with the surface.| Tilt the nozzle forward.
The dirty water tank is full.| Empty the dirty water tank.
The filter located under the dirty water tank is clogged.| Check the filter screen for dirt and debris.
Water dispenser does not work| You are not pressing button (A).| Press button (A) to release the soap and water mixture.
The clean water tank is not properly installed.| Place the clean water tank correctly.
The fresh water tank is empty.| Fill the tank with water and soap.
Air has been trapped between the pump and the hose.| Turn on the unit, prime the pump by lowering the hose to the ground and hold the trigger for 1 minute.
The clean water tank valve may be clogged.| Hold the tank over the sink and press the valve underneath to release it.

WARRANTY AND TECHNICAL ASSISTANCE

This product enjoys the recognition and protection of the legal guarantee in accordance with current legislation. To enforce your rights or interests you must go to any of our official technical assistance services.
You can find the closest one by accessing the following web link: http://taurus-home.com/
You can also request related information by contacting us.
You can download this instruction manual and its updates at http://taurus-home.com/

India C-175, Sector-63, Noida, Gautam Budh Nagar – 201301, Delhi