XPOtool 63297 Steering Head Stand Instruction Manual
- June 17, 2024
- XPOtool
Table of Contents
XPOtool 63297 Steering Head Stand
Product Information
Specifications
- Product Name: Steering-head Assembly Stand
- Model Number: 63297
Introduction
Thank you for purchasing this quality product. To minimize the risk of
injury, we urge our clients to take some basic safety precautions when using
this device. Please read the operation instructions carefully and make sure
you have understood its content. Keep these opDeration instructions safe.
Safety Instructions
It is important to use the unit with foresight and with the greatest
possible caution. Follow these safety instructions to ensure safe operation:
- Read and follow the operating instructions and safety information before using for the first time.
- Minimize the risk of injury by taking basic safety precautions.
Operation
To lift the motorcycle, follow these steps:
- Place the front triple tree pin inside the center of the stem/triple tree.
- Push down on the pin to lift the motorcycle.
Exploded View and Parts List
| Name | Qty |
|---|---|
| Handle | 1 |
| Screw | 2 |
| Curved washer | 3 |
| Nut | 4 |
| Bracket | 5 |
| Screw | 6 |
| Gasket | 7 |
| Wheel | 8 |
| Small pipe | 9 |
| Pin | 10 |
| Support frame | 11 |
| Bolt | 12 |
| Support head | 13 |
Important Notice
The reprint or reproduction, even of excerpts, and any commercial use, even
in part, of this instruction manual require the written permission of WilTec
Wildanger Technik GmbH.
FAQ
-
Q: Where can I find the most recent version of the manual?
A: The most recent version of this manual in various languages can be found in our online shop via: https://www.wiltec.de/docsearch. -
Q: How can I contact customer service?
A: You can send an email to service@wiltec.info or use the contact form on our website: https://www.wiltec.de/contacts/. -
Q: What should I do if I have suggestions for improvement or found any irregularities?
A: Please contact us via email at service@wiltec.info with your suggestions or if you have found any irregularities. -
Q: What is the address for returning orders?
A: To return orders for exchange, repair, or other purposes, please use the following address: [Postal Address]. Before returning the goods, it is important to contact our customer service team for a smooth execution of your complaint or return.
Read and follow the operating instructions and safety information before using
for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical
data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities,
please contact us.
The information contained in this document may alter at any time without
previous notice. It is prohibited to copy or spread any parts of this document
in any way without prior written allowance. All rights reserved.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible
mistakes in this operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible
efforts to ensure that the operating manual is complete, faultless, and up to
date, mistakes cannot be entirely avoided. If you should find a mistake or
wish to make a suggestion for improvement, we look forward to hearing from
you.
- Send an e-mail to: service@wiltec.info
- or use our contact form: https://www.wiltec.de/contacts/
- The most recent version of this manual in various languages can be found in our online shop via: https://www.wiltec.de/docsearch
- Our postal address is: WilTec Wildanger Technik GmbH
- Königsbenden 12
- 52249 Eschweiler
Germany
- To return orders for exchange, repair, or other purposes, please use the following address. Attention! To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods.
- Returns Department
- WilTec Wildanger Technik GmbH
- Königsbenden 28
- 52249 Eschweiler
- E-mail: service@wiltec.info
- Tel: +49 2403 55592–0
- Fax: +49 2403 55592–15
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury
we urge that our clients take some basic safety precautions when using this
device. Please read the operation instructions carefully and make sure you
have understood its content.
Keep these operation instructions safe.
Safety instructions
- Only carry out the assembly in accordance with these instructions. Improper assembly can lead to dangerous situations.
- Wear safety goggles, a dust mask that protects your respiratory tract, and robust work gloves during assembly.
- Keep your work area clean and provide good lighting.
- Keep bystanders away from your work area during assembly.
- Do not assemble the stand if you are tired or under the influence of alcohol, drugs, or medicine.
- The maximum load indicated and the product characteristics apply only to a correctly and fully assembled product.
- Only use the unit on a hard, level surface.
- Secure the motorbike before transport using wedges and straps.
- Keep a safe distance from the rack, wedges, and motorbike when loading and unloading.
- Load and unload the motorbike at low speed.
- Only use the device for motorbike wheels. The device is not suitable for aircrafts.
- Determine the size of the wheels before use.
- In addition, attach the side stand if available.
- Do not ride the motorbike on the assembly stand.
- Do not remain seated on the motorbike while loading.
- Check the stand before each use. Do not use it if any parts are loose or damaged.
- The warnings, precautions, and instructions in this manual cannot cover all possible conditions and situations. Always use the unit with foresight and with the greatest possible caution.
Operation
The front triple tree pin is placed inside the centre of the stem/triple tree; push down to lift the motorcycle.
Exploded view and parts list
| № | Name | Qty | № | Name | Qty |
|---|---|---|---|---|---|
| 1 | Handle | 1 | 8 | Wheel | 4 |
| 2 | Screw | 2 | 9 | Small pipe | 4 |
| 3 | Curved washer | 4 | 10 | Pin | 2 |
| 4 | Nut | 4 | 11 | Support frame | 1 |
| 5 | Bracket | 2 | 12 | Bolt | 2 |
| 6 | Screw | 2 | 13 | Support head | 1 |
| 7 | Gasket | 4 | 14–18 | Adapter | 5 |
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in
part, of this instruction manual require the written permission of WilTec
Wildanger Technik GmbH.
https://www.XPOtool.com The Tool Experts
Item 63297
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>