FESTOOL C 18 Li Cordless Drill Instruction Manual

: June 17, 2024
: FESTOOL

FESTOOL C 18 Li Cordless Drill

Product Information

Specifications

Product Name: Akku-Bohrschrauber
Model: C 18 Li
Serial Number: 205215

Product Usage Instructions

Safety Instructions
Before using the cordless drill, please read and follow the safety instructions below:

General Safety Instructions

Always wear protective goggles.
Use respiratory protection when necessary.
Read and follow the user manual and safety instructions.
Do not assemble or disassemble parts using power tools.

Machine-Specific Safety Instructions

Exercise caution when using long drill bits.

Additional Safety Instructions

The sound pressure level during drilling is typically around 65 dB(A).
The sound pressure level during screwing is typically around 64 dB(A).
The vibration emission value (ah) during drilling in metal is approximately 3.6 m/s².
The vibration emission value (ah) during screwing is less than 2.5 m/s².

Product Usage

Suitable Applications
The Akku-Bohrschrauber is suitable for the following applications:

Drilling
Screwing

FAQs

Q: What safety precautions should I take when using the cordless drill?
A: To ensure your safety, please wear protective goggles and use respiratory protection when necessary. Always follow the user manual and safety instructions provided.
Q: What are the sound levels during drilling and screwing?
A: The sound pressure level during drilling is typically around 65 dB(A), while the sound pressure level during screwing is typically around 64 dB(A).
Q: What are the vibration emission values during drilling and screwing?
A: The vibration emission value (ah) during drilling in metal is approximately 3.6 m/s², while the vibration emission value (ah) during screwing is less than 2.5 m/s².

Declaration of Conformity

EC-Declaration of Conformity
We declare under our sole responsibility that this product is in conformity with all relevant provisions of the fol-lowing directives including their amendments and complies with the following standards:

2006/42/EG, 2014/30/EU2), 2014/53/EU3), 2011/65/EU

EN 62841-1: 2015 + AC:2015, EN 62841-2-1:2018
EN 62841-2-2:2014 + AC:2015,
EN 55014-1: 20172),EN 55014-2: 20152),
EN 300 328:2016 V2.1.13),
EN 301 489-1:2017 V2.1.13),
EN 301 489-17:2017 V3.1.13),
EN 50581: 2012

Festool GmbH Wertstr. 20, D-73240 Wendlingen GERMANY
Wendlingen, 2019-06-25

Markus Stark
Head of Product Development

Ralf Brandt
Head of Product Conformity

im definierten Seriennummer-Bereich (S-Nr.) von 40000000 – 49999999/ in the specified serial number range (S-Nr.) from 40000000 – 49999999/ dans la plage de numéro de série (S-Nr.) de 40000000 – 49999999
gilt in Kombination mit Akku/valid in combination with battery pack/valable en combinaison avec batteries BP 18 Li 5,2 AS, BP 18 Li 6,2 AS, BP 18 Li 3,1 C
gilt in Kombination mit Bluetooth® Akku/valid in combination with Bluetooth® battery pack/valable en combinaison avec Bluetooth® batteries BP 18 Li 5,2 ASI, BP 18 Li 6,2 ASI, BP 18 Li 3,1 CI

Declaration of Conformity
We as the manufacturer Festool GmbH, WertstraBe 20, 73240 Wendlingen, Germany declare under our sole responsibility that the product(s):

Designation: Cordless drill/screwdriver
Designation of Type (s): C 18 Li
Serial number (s) 1): 205215

fulfills all the relevant provisions of the following UK Regulations:

S.1.2008/1597 Supply of Machinery (Safety) Regulations 2008
5.1. 2016/1091 (2) Electromagnetic Compatibility Regulations 2016
5.1. 2017/1206 (3) Radio Equipment Regulations 2017
S.1.2012/3032 Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

and are manufactured in accordance with the following designated standards:

BS EN 62841-1: 2015
BSEN62841-2-1:2018
BS EN 62841-2-2: 2014
BSEN55014-1:2017 2
BS EN 55014-2:2015 2
EN 300 328:2016 V2.1.1 3
EN 301489-1:2017V2.1.1 3
EN 301 489-17:2017 V3.1.1 3
BS EN IEC 63000:2018

in the specified serial number range /S-Nr.J from 400000000 – 499999999
valid in combination with battery pack BP 18 Li 5,2 AS, BP 18 Li 6,2 AS, BP 18 Li 3, TC, BP 18 Li 4,0 HPC-AS
valid in combination with Bluetoo/h® battery pack BP 18 Li 5,2 AS/, BP 18 Li 6,2 AS!, BP 18 Li 3, T Cl, BP 18 Li 4,0 HPC-ASI $FESTOOL-C-18-Li-Cordless-Drill-fig- $10$$

Symbols

$FESTOOL-C-18-Li-Cordless-Drill-fig- $11$$

UKCA marking: The United Kingdom Conformity Assessed symbol is a marking for products being placed on the market in the United Kingdom. It is a manufacturer’s indication that the product is in conformance with the relevant regulations in the UK.

Safety warnings

General power tool safety warnings

WARNING!
Read all safety warnings, in structions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Follow the operating manual for the charger and the battery pack.

Machine-specific safety notices

Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fasteners may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

Safety instructions when using long drill bits

Never operate at a higher speed than the maximum speed rating of the drill bit. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can bend causing breakage or loss of control, resulting in personal injury.

Further safety instructions

Use appropriate detection devices to look for any hidden supply lines or consult your local utility company. If the insertion tool makes contact with live cables, it can result in fire and electric shock. Damage to a gas pipe can lead to an explosion. Penetration of a water pipe can result in damage to property.
Wear suitable personal protective equipment: Ear protection and safety goggles.

CAUTION!
Power tools can jam and cause sudden kickbacks! Switch off immediately!

Hold the power tool firmly in your hand. Make sure the speed is adjusted correctly when screwdriving. Be prepared for a high reaction torque, which may cause the power tool to turn and possibly lead to injury.
Do not use the power tool in the rain or in damp surroundings. Moisture in the power tool may cause a short circuit and fire.
Do not lock the on/off switch in place permanently.
Do not use power supply units or third-party battery packs to operate cordless power tools. Do not use third-party chargers to charge the battery packs. The use of accessories not expressly authorised by the manufacturer can result in electric shocks and/or serious accidents.
Only for AS/NZS: The tool shall always be supplied via a residual current device with a rated residual current of 30 mA or less.

Emission levels
The levels determined in accordance with EN 62841 are typically:

Drilling

Sound pressure level LPA = 65 dB(A)
Sound power level LWA = 76 dB(A)
Uncertainty K = 3 dB

Fastening

Sound pressure level LPA = 64 dB(A)
Sound power level LWA = 75 dB(A)
Uncertainty K = 3 dB

CAUTION
Noise generated when working Risk of damage to hearing

Use ear protection.

Vibration emission level ah (vector sum for three directions) and uncertainty K measured by EN 62841:

Drilling in metal
- ah = 3.6 m/s2
- K = 1.5 m/s2
Fastening
- ah < 2.5 m/s2
- K = 1.5 m/s2

The specified emission levels (vibration, noise)

are used to compare machines.
They are also used for making preliminary estimates regarding vibration and noise load during operation.
They represent the primary applications of the power tool.

CAUTION
The emission values may deviate from the specified values. This is dependent on how the tool is used and the type of workpiece being machined.

The actual load during the entire operating cycle must be evaluated.
Depending on the actual load, suitable protective measures must be defined to protect the operator.

Intended use

Cordless drill is suitable

for drilling in metal, wood, plastics and similar materials,
for screwing in and tightening screws.
intended for use with BP Festool battery packs of the same voltage class.

The user is liable for damage and accidents caused by improper and non- intended use; this also includes damage and wear caused by continuous industrial operation.

Technical Data

Cordless drill C 18 Li

Motor voltage 18 V
No-load speed*| 1st gear    0 – 450 rpm
1st gear 0 – 1500 rpm
Max. torque| Soft material (wood)      27 Nm
Hard material (metal)       45 Nm
Adjustable torque**| 1st gear     0.8 – 8 Nm
2nd gear    0.5 – 6 Nm
Chuck clamping range 1.5 – 13 mm
Max. drill diameter| Wood      40 mm
Metal       13 mm
Tool holder in drill spindle 1/4’’
Weight (incl. battery pack BP 18 Li 6,2 AS and chuck) as per EPTA procedure 2 kg 01:2014
Weight with Centrotec, without a battery pack. 1.0 kg

Speed specifications with fully charged battery pack.
The maximum speed is reduced in the lower torque stages (values in clockwise rotation).

Functional description

[1-1] Torque thumbwheel
[1-2] Bit store
[1-3] LED light
[1-4] Gear switch
[1-5] Drilling symbol
[1-6] Screwdriving symbol
[1-7] Screwdriving/drilling selector switch
[1-8] Rotational direction switch
[1-9] On/off switch
[1-10] Belt clip
[1-11] Buttons for releasing the battery pack
[1-12] Insulated gripping surfaces (grey shaded area)
[1-13] Capacity display button on battery pack
[1-14] Capacity indicator

Accessories shown or described are not always included in the scope of delivery. The specified illustrations appear at the beginning of the Operating Instructions.

$FESTOOL-C-18-Li-Cordless-Drill-fig- $1$$

Commissioning

Belt clip
The belt clip allows a short-term securing of the device in the work clothes. Insert the belt clip on the designated side, right or left, and fix it with the screw [1a].

Switching on/off[1-9] Press = ON, release = OFF

The speed can be infinitely adjusted, relative to the pressure applied to the on/off switch.
The LED light [1-3] lights up when the on/off switch [1-9] is pressed.

Battery pack

Changing the battery pack

Inserting the battery pack [2a]
Removing the battery pack [2b]

$FESTOOL-C-18-Li-Cordless-Drill-fig- $2$$

The battery pack is ready to use straight out of the box and can be charged at any time.

Capacity indicator
The capacity display [1-14] indicates the charge of the battery pack for approx. 2 seconds after the button [1-13] is pressed:

Recommendation:
Charge the battery pack before any further use.

Further information about the charger and battery pack with capacity indicator can be found in the corresponding operating manual.

Settings

CAUTION

Risk of injury
Only adjust the settings when the power tool is switched off.

Changing direction of rotation [1-8]

Switch to the left = clockwise rotation
Switch to the right = counterclockwise rotation

Changing gear [1-4]
Only actuate the gear switch with the tool switched off. Otherwise, there is a risk of damaging the gear unit.

Gear switch forwards (digit 1 visible) = 1st gear
Gear switch to rear (digit 2 visible) = 2nd gear

Fastening

Adjust the switch so that its marking [1-7] faces the screw symbol [1-6].
Adjust the torque accordingly at the torque wheel [1-1].
Position 1 = low torque
Position 25 = high torque
An acoustic signal sounds when the preset torque is reached and the machine then switches off. You must release and press the ON/OFF switch [1-9] again to start the machine.

Drilling
Adjust the switch [1-7] so that its marking faces the drilling symbol [1-5]. Maximum torque is set in this position.

Tool holder, attachments

WARNING

Risk of injury
Remove the battery pack from the power tool before performing any work on the power tool.

CAUTION
Risk of injury from hot and sharp insertion tool

Do not use any blunt or faulty insertion tools.
Wear protective gloves when handling an insertion tool.

CENTROTEC tool chuck [3]
Quick change of tools with CENTROTEC shaft Only clamps CENTROTEC tools in CENTROTEC tool chucks.

$FESTOOL-C-18-Li-Cordless-Drill-fig- $3$$

Chuck [4]
For clamping drill bits and bits with max. shaft diameter of 13 mm.

$FESTOOL-C-18-Li-Cordless-Drill-fig- $4$$

WARNING! Clamp the tool centrally in the chuck.

Angle attachment [5]
Drilling and screwdriving at right angles to the power tool (available as an accessory depending on the model).

Eccentric adapter [6]
Screwdriving close to edges with bits according to ISO 1173 (available as an accessory depending on the model).

Tool holder in the drill spindle [7]
Bits can be inserted directly into the hexagon socket holder of the drill spindle.

$FESTOOL-C-18-Li-Cordless-Drill-fig- $7$$

Working with the machine

WARNING

Risk of injury

Always secure the workpiece in such a manner that it cannot move while being machined.

Bit depot [1-2]
Magnetic, for storing bits and bit holders.

Acoustic warning signals
Acoustic warning signals sound and the machine switches off in the following operating states:

Service and maintenance

WARNING

Risk of injury, electric shock

Always remove the battery pack from the power tool before performing any maintenance or service work.
All maintenance and repair work that requires the motor housing to be opened should always be carried out by an authorised service workshop.

Customer service and repairs must only be carried out by the manufacturer or service workshops. Find the nearest address at: www.festool.co.uk/service.
Always use original Festool spare parts. Order no. at: www.festool.co.uk/service.

To ensure constant air circulation, always keep the cooling air openings in the motor housing clean and free of blockages. Keep the contacts on the power tool, charger and battery pack clean.

Environment

Do not dispose of the device in the household waste! Recycle devices, accessories and packaging. Observe appli cable national regulations.

EU only:
According to the European Directive on waste electrical and electronic equipment and implementation in national law, used power tools must be collected separately and handed in for environmentally friendly recycling.

Information on REACH: www.festool.com/reach.

General information

Imported into the UK by

Festool UK Ltd
1 Anglo Saxon Way Bury St Edmunds IP30 9XH Great Britain

Bluetooth®
The Bluetooth® word mark and the logos are registered trademarks of Bluetooth SIG, Inc.; they are used by TTS Tooltechnic Systems AG & Co. KG, and therefore by Festool, under licence.