FESTOOL CXS 18 Cordless Drill User Manual

: June 17, 2024
: FESTOOL

Table of Contents

FESTOOL CXS 18 Cordless Drill
Product Information
Product Usage Instructions
Symbols
Battery pack
Commissioning
Settings
Tool holder, attachments
Environment
General information
Documents / Resources

FESTOOL CXS 18 Cordless Drill

Product Information

Specifications

Product Name : Akku-Bohrschrauber (Cordless drill/screwdriver)
Model : CXS 18 TXS 18
Serial Number Range : 40000000 – 49999999

Product Usage Instructions

Charging the Battery

To ensure optimal performance, it is recommended to fully charge the battery before using the cordless drill/screwdriver for the first time.

Follow these steps to charge the battery:

Connect the charger to a power outlet.
Insert the battery into the charger.
The charging indicator will light up to indicate that the charging process has started.
Wait for the battery to fully charge. This may take several hours.
Once the battery is fully charged, remove it from the charger.

Operating the Cordless Drill/Screwdriver

Before using the cordless drill/screwdriver, make sure to familiarize yourself with its controls and safety features.

Follow these steps to operate the cordless drill/screwdriver:

Insert the fully charged battery into the cordless drill/screwdriver.
Select the appropriate drill or screwdriver bit for your task and insert it into the chuck.
Tighten the chuck securely to hold the bit in place.
Adjust the torque setting according to your desired level of power.
Press the trigger to start the drill/screwdriver. Release the trigger to stop.
Use the forward/reverse switch to select the desired direction of rotation.
Always wear appropriate personal protective equipment, such as safety goggles and gloves, when operating the cordless drill/screwdriver.

Maintenance and Care

To ensure the longevity and performance of your cordless drill/screwdriver, regular maintenance and care are essential.

Follow these guidelines for maintenance and care:

Keep the cordless drill/screwdriver clean and free from dust and debris. Use a soft cloth to wipe down the exterior after each use.
Regularly inspect the power cord and battery for any signs of damage. If any damage is found, discontinue use and contact customer support.
Store the cordless drill/screwdriver in a cool, dry place when not in use.
Do not expose the cordless drill/screwdriver to extreme temperatures or moisture.
Periodically check the torque settings and adjust if necessary.

FAQ

Q1: How long does it take to fully charge the battery?
- A1 : The charging time for the battery varies depending on its current level of charge. It may take several hours to fully charge the battery.
Q2: Can I use this cordless drill/screwdriver for heavy-duty tasks?
- A2 : The cordless drill/screwdriver is designed for general household tasks and light-duty applications. It is not recommended for heavy-duty tasks.
Q3: What should I do if the cordless drill/screwdriver stops working?
- A3 : If the cordless drill/screwdriver stops working, check the battery level and ensure it is fully charged. If the issue persists, contact customer support for further assistance.

Cordless drill/screwdriver

fil / (T-Nr.)

CXS/ 18 10363213
TXS/ 18 10363225

EU Declaration of Conformity. We declare under

sole responsibility that this product complies with all the relevant requirements in the following EU Directives, and the following standards or normative documents were applied:

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and safety instructions.
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Wear protective gloves when changing tools!
Inserting the battery pack.
Remove the battery pack.
Only assemble by hand!
Do not dispose of it with domestic waste.
CE marking: Confirms the conformity of the power tool with the European Community directives.
Tip or advice

Handling instruction

UKCA marking: The United Kingdom
Conformity Assessed symbol is a marking for products being placed on the market in the United Kingdom. A manufacturer indicates that the product is in conformance with the relevant regulations in the UK.

Safety warnings

General power tool safety warnings
WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Follow the operating manual for the charger and the battery pack.

Machine-specific safety notices

Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fasteners may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Use appropriate detection devices to look for any hidden supply lines or consult your local utility company. If the insertion tool makes contact with live cables, it can result in fire and electric shock. Damage to a gas pipe can lead to an explosion. Penetration of a water pipe can result in damage to property.
Keep the power tool away from magnetic fields. The power tool may switch on unexpectedly and cause injury.
Wear suitable personal protective equipment:
Ear protection, safety goggles, a dust mask for work that generates dust.

CAUTION! Power tool can jam and cause sudden kickback! Switch off immediately!

Firmly hold the power tool with one hand on the handle [1-8] and keep the other hand away from the hazard area. Make sure the speed is adjusted correctly when screwdriving. Be prepared for a high reaction torque, which may cause the power tool to turn and lead to injury.
Do not use the power tool in the rain or in damp surroundings. Moisture in the power tool may cause a short circuit and fire.
Wait until the power tool has come to a complete halt before placing it down. The insertion tool can get caught and lead to a loss of control of the power tool.
Avoid unintentional activation. Carrying the electric power tool with your fingers on the on/off switch can lead to accidents. When you are not using the power tool, set the switch for the transport lock [1-7] to the center position.
Do not manipulate or block controls, e.g. the on/off switch.
Do not use power supply units or third-party battery packs to operate cordless power tools. Do not use third-party chargers to charge the battery packs. The use of accessories not expressly authorized by the manufacturer can result in electric shocks and/or serious accidents.

Warning of harmful light radiation. Do not look into the light beam for long periods. Do not direct the light beam toward other people or animals. Optical radiation can damage the eyes – [4].

Use a dust extractor when working with dust.
Do not use any insertion tools or accessories that the manufacturer has not specially designed or recommended for this power tool. Just because you can attach accessories or insertion tools to your power tool does not guarantee that they can be used safely. This may increase the risk of injury, accelerate the wear on the power tool, and decrease the quality of the working results.
Depending on the type and use of the accessory, particles, the insertion tool or parts of the insertion tool could come loose. This can lead to increased exposure to dust and to unexpected movements.
Do not use any insertion tools or accessories that the manufacturer has not specially designed or recommended for this power tool. Just because you can attach accessories or insertion tools to your power tool does not guarantee that they can be used safely. This may increase the risk of injury, accelerate the wear on the power tool, and decrease the quality of the working results.
Depending on the type and use of the accessory, particles, the insertion tool or parts of the insertion tool could come loose. This can lead to increased exposure to dust and to unexpected movements.
Wear suitable personal protective equipment. Be prepared for a high-reaction torque torque, which may cause the power tool to turn and lead to injury.

Safety instructions when using long drill bits

Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can bend causing breakage or loss of control, resulting in personal injury.

Emission levels

The levels are determined in accordance with EN 62841 are typical:
Sound pressure level / LPA = 72 dB(A)
Sound power level / LWA = 83 dB(A)
Uncertainty/ K = 3 dB

CAUTION
Noise generated when working Risk of damage to hearing

Use ear protection.
Vibration emission level ah (vector sum for three directions) and uncertainty K measured in accordance with EN 62841:
- ah < 2.5 m/s2
- K = 1.5 m/s2
The specified emission levels (vibration, noise) are used to compare machines.
- They are also used for making preliminary estimates regarding vibration and noise-load during operation.
- They represent the primary applications of the power tool.
CAUTION
- The emission values may deviate from the specified values. This is dependent on how the tool is used and the type of workpiecebeing machined.
- The actual load during the entire operating cycle must be evaluated.
- Depending on the actual load, suitable protective measures must be defined in order to protect the operator.

Intended use

Cordless drill suitable for drilling in metal, wood, plastics and similar materials,

for screwing in and tightening screws.
intended for use with BP Festool battery packs of the same voltage class.
The user is liable for damage and accidents caused by improper and non-intended use; this also includes damage and wear caused by continuous industrial operation.

Technical data

FESTOOL-CXS-18-Cordless-Drill-FIG21

Speed values are based on a fully charged battery pack.
The maximum speed (value for clockwise rotation) is reduced in the lower torque settings.
Values refer to the chuck clamping range included in the delivery. Festool 13 mm chucks can also be used.

Parts of the device

FESTOOL-CXS-18-Cordless-Drill-FIG1

[1-1] Buttons for releasing the battery pack
[1-2] Capacity indicator button on battery pack
[1-3] Capacity indicator
[1-4] LED light
[1-5] On/off switch
[1-6] Gear switch
[1-7] Rotational direction switch and safety lock/transport lock
[1-8] Handle
[1-9] Thumbwheel for torque/drilling/lighting duration on and duration off
[1-10] Belt clip
[1-11] Bit store
[1-12] Insulated gripping surfaces (grey shaded area)

Accessories shown or described are not always included in the scope of delivery. The specified illustrations appear at the beginning of the Operating Instructions.

Battery pack

FESTOOL-CXS-18-Cordless-Drill-FIG2

FESTOOL-CXS-18-Cordless-Drill-FIG3

Before using the battery pack, check that the battery interface is clean. Any contamination of the battery interface may impair correct contact and lead to the contacts being damaged. A faulty contact may result in the machine overheating or being damaged.

[2A] /Remove the battery pack.

[2B]/ Insert the battery pack – until it clicks into place.

Further information about the charger and battery pack with capacity indicator can be found in the corresponding operating manual.

Commissioning

CAUTION
Risk of injury

Only assemble when the power tool is switched off!

Belt clip [1-10]

The belt clip allows the power tool to be attached to work attire for brief periods. It can be attached to the right or left of the power tool using a screw [3].

Switching on/off [1-5]

Press = ON, release = OFF

The speed can be continuously adjusted, relative to the pressure applied to the on/off switch.

Set the rotational direction switch [1-7] to the center position to lock the on/off switch. The LED light [1-4] lights up when the on/off switch [1-5] is pressed

Settings

CAUTION
Risk of injury

Only adjust the settings when the power tool is switched off.

Changing direction of rotation [1-7]

Switch to the left = clockwise rotation
Switch to the right = counterclockwise rotation

Changing gear

The gear switch [1-6] can be used to switch the gear unit when the power tool is switched off.

Adjusting the torque [1-9]

Screwdriving

Adjust the torque on the thumbwheel [1-9].
Carry out a test of the torque in a piece of the same material.
Always check the working result.
Position 1 = low torque
Position 13 = high torque
If the temperature of the power tool is under 0 °C, the torque shut-off values may deviate. Leave the power tool idling (thumbwheel on drill symbol ) until it has warmed up.
A signal sounds when the set torque is reached and the power tool switches off. The power tool only starts up again if the on/off switch [1-5] is released and pressed again

Drilling

Marking shows the drill symbol = maximum torque.

Adjust lighting [1-9]

Configure lighting at the thumbwheel [1-9].

Marking shows position 1 to 13 or drill symbols. The LED light [1-4] automatically switches on and off with the power tool. The LED light has an afterglow for a short time after the tool has been switched off.

Marking shows lighting duration on/ maximum torque. Briefly apply pressure on the on/off switch [1-5] to permanently switch the LED light on. After ten minutes, the LED light automatically switches off.

Marking shows lighting duration off/ maximum torque. The LED light is permanently switched off.

Festool Work app

The power tool can be configured with the Festool Work app.
The battery pack is connected via Bluetooth®, see the operating manual for the battery pack.

Not available in all countries.

Tool holder, attachments

WARNING
- Risk of injury
- Remove the battery pack from the power tool before performing any work on the power tool.
CAUTION
Risk of injury from hot and sharp insertion tool
Do not use any blunt or faulty insertion tools.
Wear protective gloves when handling an insertion tool.

Prior to initial use: Apply some multipurpose grease to the drill spindle.

CENTROTEC tool chuck [5]

Fast changeover of tools with CENTROTEC shaft.
WARNING! Only clamp CENTROTEC tools in CENTROTEC tool chucks.

****Wear gloves when replacing tools.

Chuck [6]

For clamping drill bits and bits with a max. shaft diameter of 10 mm.
WARNING! Clamp the tool centrally in the chuck.

Angle attachment [7]

Drilling and screw-driving at right angles to the power tool (available as an accessory depending on the model).

Tool holder in the drill spindle [8]

Bits can be inserted directly into the hexagon socket holder of the drill spindle.

Working with the electric power tool

WARNING

Risk of injury
Only position the power tool on the screw when it is switched off.
Always secure the workpiece in such a manner that it cannot move during machining.
Keep hands away from the rotating tools.

CAUTION

Risk of burns

The tool holder and tool may become very hot during operation.
Allow them to cool down before attaching them to the belt clip.

Bit store [1-11]

CAUTION

Risk of injury from metal cuttings in the bit store.
Clean the bit store regularly and clear out metal cuttings.
Magnetic, for storing bits and bit holders.

Warning signals

Warning signals occur and the power tool switches off in the following operating states:

FESTOOL-CXS-18-Cordless-Drill-FIG27 FESTOOL-
CXS-18-Cordless-Drill-FIG28

Service and maintenance

WARNING
Risk of injury, electric shock

Always remove the battery pack from the power tool before performing any maintenance or service work.
All maintenance and repair work that requires the motor housing to be opened should always be carried out by an authorized service workshop.

Customer service and repairs must only be carried out by the manufacturer service workshops. Find the nearest address at: www.festool.co.uk/service

Always use original Festool spare parts. Order no. at: www.festool.co.uk/service

To ensure constant air circulation, always keep the cooling air openings in the motor housing clean and free of blockages. Keep the contacts on the power tool, and charge the battery pack clean.

Environment

Do not dispose of the device in the household waste! Recycle devices, accessories, and packaging. Observe applicable national regulations. Before disposal, users must remove discharged batteries, accumulators that are not enclosed by the device and lights that can be removed from the old device without causing damage, if these are present. The old batteries and rechargeable batteries can then be recycled systematically. In accordance with the European Directive on waste electrical and electronic equipment and implementation in national law, used power tools must be collected separately and handed in for environmentally friendly recycling.

Information about collection points for correct disposal is available at www.festool.co.uk/recycling.

Information on REACH : www.festool.co.uk/reach

General information

Imported into the UK by

Festool UK Ltd
1 Anglo Saxon Way
Bury St Edmunds
IP30 9XH
Great Britain

Bluetooth®

The Bluetooth® word mark and the logos are registered trademarks of Bluetooth SIG, Inc.; they are used by TTS Tooltechnic Systems AG & Co. KG, and therefore by Festool, under license.