PROAIM DL-CLBS-01 Columbus Video Camera Platform Dolly User Manual

Columbus Video Camera Platform
Dolly (DL-CLBS-01)

DL-CLBS-01 Columbus Video Camera Platform Dolly

Assembly Manual

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo- copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

Columbus Dolly Setup

• Place the Columbus Dolly on the Velvet Steel Track (Not Included), as shown in the image.
• Now place the Columbus Dolly onto the Velvet Steel Track. Make sure all wheels are aligned correctly on the track and dolly runs smoothly.
  NOTE: It smoothly maneuvers on a curved or conventional track with equipped 4 x 4 skateboard wheels that assure flawless and smooth mobility without drift, noise, or excessive rolling resistance.
  NOTE: Adding to that, the wheel has a push and pull mechanism that allows the wheels to be readily attached and removed from the dolly at any given moment.

Assembling of Push Bar Handel

• Now, attach the push Bar Handle to the side corner of the Columbus Dolly by tightening both the knobs to properly secure it.
• The push bar handle is properly attached to the Columbus Dolly.
  NOTE: The push-bar handle offers smooth dolly operations; it can be attached to any four corners of the platform of the dolly.

Assembling of Euro Adapter Plate

• Place the Adapter Plate (Not Included) by matching it with the center thread hole of the Dolly, and then insert the bolts.
• After inserting the bolts in the Euro Adapter Plate tighten the bolts with the help of the Allen Key.

Assembling of Flexion Bazooka Set

• Loosen the Knob of the Flexion Bazooka (Not Included) and mount it on the Euro Adapter Plate ,as shown in the image.
• After properly mounting the Flexion Bazooka onto the Euro Adapter Plate securely re-tighten the assembly with the ratchet knob.
• Loosen the ratchet knob of Bowl Riser Adapter (Not Included), and then attach it to the top of the Flexion Bazooka.
• Then secure the assembly using the ratchet knob.

Assembling of 75mm Fluid Head

• Remove the knob of 75mm Bowl Fluid Head (Not Included) and mount it onto the Bowl Riser Adapter.
• Then, properly tighten the knob of the Fluid Head from bottom.
• Pull & release the knob of the Fluid Head, and then remove the plate. Now, attach the plate to the bottom of the camera (Not Included).
• Secure the assembly using the screw driver and mount the camera on the Fluid Head, as shown in the image.
• Now, pull the knob of the Fluid Head and properly tighten it to secure the camera .

Cranked Telescopic Bazooka Setup

• Loosen the knob of the Cranked Bazooka (Not Included) and mount it on the Euro Adapter Plate as shown in the image. NOTE: Multiple 3/8”-16 threaded holes on the dolly platform offer incredible mounting flexibility for  compatible gear and accessories. That’s why you can change the position of euro adapter and put it on the side.
• After properly mounting the Cranked Bazooka on the Euro Adapter Plate, secure the Bazooka with the ratchet knob by tightening it.

Assembling of Offset Euro (100mm Bowl Adapter)

• Loosen the ratchet knob of the offset (100mm Bowl Adapter) (Not Included) and mount it on the Cranked Bazooka, as shown in the image.
• After properly mounting the offset on the cranked Bazooka secure it by tightening the ratchet knob.
• Mount the 100mm bowl Fluid Head on the offset.

Assembling of Turnstile mount

• Place the Turnstile at the center of the Columbus Dolly by matching the threads.
• Then, properly secure the Turnstile (Not Included) on the Columbus Dolly with the help of bolts.
• Properly lock the assembly with the help of the provided locking brake of the Turnstile.

Assembling of Seat arm

• Loosen the knob of the seat arm (Not Included), and then place it on the baby pin of the Turnstile.
• Properly secure it by tightening the knob of the seat arm.
•  Loosen the second knob (top seat mounting) of seat arm and insert the seat (Not Included) into the seat hole by matching the threads.
• Now, properly secure the seat by tightening the seat arm knob.
  Compatibility :Compatible with a Euro-adapter or turnstile mount, it lets you attach a bazooka, risers, seats, other compatible gears, and accessories.

YOUR PROAIM COLUMBUS VIDEO CAMERA PLATFORM DOLLY ALL DRESSED UP AND READY TO GO!

Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product  subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us : In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>