poly 2200-86260-101 Studio X30 Video Bar with Touch Control User Guide
- June 4, 2024
- Poly
Table of Contents
poly 2200-86260-101 Studio X30 Video Bar with Touch Control
SETTING UP THE POLY STUDIO X30
RingCentral Rooms combine software with hardware solutions to provide easier deployments and a high-quality video conferencing experience. This guide provides an overview of the basic setup of the Poly Studio X30 for RingCentral Rooms.
PARTS AND ACCESSORIES
The Poly Studio X30 ships with the following parts and accessories:
- A. Poly Studio X30 video bar B. Power supply and cable C. Magnetic lens cap
- D. TV mount
- E. LAN cable
- F. HDMI cable
Note : An optional table stand or VESA mount can be ordered
separately.
BASIC SETUP
Follow these steps to complete the physical setup of the Poly Studio X30:
- Connect the LAN cable (E) from your network to the LAN port (d).
- Connect the HDMI cable (F) from your TV/monitor to the HDMI Out port (b).
- Connect the power supply cable (B) to the power port (a).
- Install the TV mount (D) to the TV mount bracket (c) using the included thumbscrew.
- Mount the Poly Studio X30 to your TV/monitor.
This completes the initial setup of the Poly Studio X30. Upon boot-up, you are
asked to register the device with Poly. You can start the registration process
by scanning the QR code displayed on your TV/monitor or by visiting the
listed URL.
After you have successfully registered your Poly Studio X30, the TV/monitor
displays a pairing code to use on your Poly TC8 Room Controller to complete
the sign-in process.
Note: You may be prompted to update your software upon boot-up, follow
the prompts to complete the update and the system will display the pairing
code after it reboots. 
© 1999 – 2021 RingCentral, Inc. All rights reserved.