Honeywell 10260S Series Actuators MOV Assembly Kit Instruction Manual

**

**

Honeywell 10260S Series Actuators MOV Assembly Kit

Product Information

Specifications

• Product Name : 10260S Series Actuators MOV Assembly Kit
• Kit Numbers : 51500671-503 and -504
• Application: Compatible with 10260S Series Actuators

Overview
The 10260S Series Actuators MOV Assembly Kit allows you to add or replace the MOV assembly in your 10260S actuators. This kit comes in two variants: 51500671-503 and -504.

Procedure

• WARNING
  Disconnect power before accessing components inside the actuator.

• ATTENTION
  When working with Printed Wiring Assemblies (PWAs), always protect against electrostatic discharge by wearing a grounded wrist strap.

Step 1

Table 1 MOV Assembly Installation Procedure Action

1. Remove AC power to the actuator.

2. Remove the four screws and terminal cover from the side of the actuator case. See Figure 1.

3. Locate terminals TB1-1 (marked L) and TB1-2 (marked N) and a ground screw on the actuator terminal block. See Figure 2.

4. Remove the screws from terminals TB1-1 and TB1-2 and the ground screw location as shown in Figure 2.

5. Install the MOV assembly as shown in Figure 2.
   Note : The larger size lug terminal is attached to the ground screw on the terminal panel. The remaining lug terminals are attached to TB1-1 and TB1-2 on the actuator terminal panel.

6. Step 6
   Action: Install a new gasket and the terminal panel cover. Secure the cover to the actuator with 4 screws.

7. Step 7
   Reapply AC power to the actuator.

8. Step 8
   Verify actuator configuration and check for correct operation.

9. Step 9

10. Return the actuator to service.

Warranty/Remedy

• Sensing and Control Honeywell
• 11 West Spring Street
• Freeport, IL 61032
• 62-86-33-22 09/01
• Printed in USA
• www.honeywell.com/sensing

FAQ

1. Q: What is the purpose of the MOV Assembly Kit?
   A: The MOV Assembly Kit allows you to add or replace the MOV assembly in your 10260S actuators.

2. Q: How many variants does the MOV Assembly Kit come in?
   A: The MOV Assembly Kit comes in two variants: 51500671-503 and -504.

3. Q: What precautions should I take when working with Printed Wiring Assemblies (PWAs)?
   A: Always protect against electrostatic discharge by wearing a grounded wrist strap.

10260S Series Actuators MOV Assembly Kit Instruction

• Document Number
  • Form: 62-86-33-22
  • Effective: 09/01
  • Supersedes: none

Overview

• These instructions apply to the following kits: 51500671-503 and -504 MOV Assembly Kit and its application to the 10260S Series Actuators. This kit allows you to add or replace the MOV assembly to 10260S actuators.

Summary

• The Metal Oxide Varistor (MOV) assembly is used on 10260S actuators that conform to CE requirements and is installed on the power input terminals of the actuator. Follow the procedure in Table 1 to install or replace the MOV assembly.
• Before you begin, make sure that you have the correct MOV assembly for the actuator input voltage.
• Part # 51500671-503 is used for 120 Vac input
• Part # 51500671-504 is used for 230 Vac input.

Tools Needed

• To perform the replacement procedure, you will need the following tools:
  • Medium Flat-blade screwdriver
  • Medium Phillips screwdriver
  • Small needle-nosed pliers

Procedure

• WARNING
  • Disconnect power before accessing components inside the actuator.
• ATTENTION
  • When working with Printed Wiring Assemblies (PWAs) always protect against electrostatic discharge by wearing a grounded wrist strap.

Table 1 MOV Assembly Installation Procedure

Warranty/Remedy

• Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to
• Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
• While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
  • Sensing and Control Honeywell
  • 11 West Spring Street Freeport, IL 61032
  • 62-86-33-22 09/01 Printed in USA
  • www.honeywell.com/sensing

References

• Products - Advanced Sensing Technologies | Honeywell

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>