hama PD/QC 3.0 USB-C Car Charger Instruction Manual

: June 17, 2024
: Hama

Table of Contents

hama PD/QC 3.0 USB-C Car Charger
Product Information
Product Usage Instructions
Operating instruction
Package contents
Safety instructions
Operation
Care and maintenance
Technical data
Warranty Disclaimer
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hama PD/QC 3.0 USB-C Car Charger

Product Information

Specifications:

Input voltage: 12V, 24V
Output voltage/current max: 5V 3A, 9V 2.77A, 12V 2.08A
PPS: 3.3 – 5.9V 3.0A, 3.3 – 11V 2.25A
Output power total: 25W max

Product Usage Instructions

Explanation of warning symbols and notes
Risk of electric shock: This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

Warning : This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note : This symbol is used to indicate additional information or important notes.

Qualified Experts
For any installation or maintenance work, it is recommended to seek the assistance of qualified experts.

Operation

Note – 12 V, 24 V vehicle electrical systems: The charger is suitable for 12 V and 24 V vehicle electrical systems.
Note – Car battery: With some vehicles, power may continue to be supplied even when the ignition is switched off. To protect your car battery from being drained, it is advised to disconnect the product from the line connection when not in use.
Note : Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Maintenance and Care
Note: Always disconnect the device from the power source before cleaning and when not in use for a long period.

FAQ (Frequently Asked Questions):

Q: What is the input voltage range for this car charger?
A: The car charger is compatible with 12V and 24V vehicle electrical systems.
Q: What is the maximum output power of this car charger?
A: The maximum output power of this car charger is 25W.
Q: Can I use this car charger with a car battery?
A: Yes, you can use this car charger with a car battery. However, it is recommended to disconnect the charger from the line connection when not in use to prevent draining the car battery.

Operating instruction

Thank you for choosing this Hama product!
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference.

Explanationofwarning symbols and notes

Risk of electric shock
This symbol indicates risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

Car charger
These operating instructions

Safety instructions

When using this product, observe the applicable local traffic laws and regulations.
Take care that components such as airbags, safety areas, controls, instruments, etc., and visibility are not blocked or restricted.
Do not allow yourself to be distracted by the product when driving a vehicle. Always pay attention to the surrounding traffic and your environment.
Protect the product from dirt, moisture, and overheating, and use it in dry environments only.
Do not drop the product and do not expose it to any major shocks.
Do not operate the product outside the power limits specified in the technical data.
Do not modify the device in any way. Doing so voids the warranty.
Do not continue to operate the product if it is visibly damaged.
Use the product only for the intended purpose.
As with all electrical products, this device should be kept out of the reach of children.
Do not bend or crush the cable.
Always pull directly on the plug when disconnecting the cable, never on the cable itself.
Do not use the product near heaters, other heat sources or in direct sunlight.
Dispose of packaging material immediately per the locally applicable regulations.
Only use the article under moderate climatic conditions.
Do not use the product in areas in which electronic products are not permitted.
Do not use the product in a damp environment and avoid splashing water.

Risk of electric shock

Do not open the device or continue to operate it if it becomes damaged.
Do not use the product if the charging cable, adapter cable or power cable is damaged.
Do not attempt to service or repair the product yourself. Leave any service work to qualified experts.

Operation

Note -12V,24Vvehicle electrical systems
The charger is suitable for 12 v 24 vehicle electrical systems.

Warning -connecting devices

Before connecting a device, check whether it can be adequately supplied with the charger’s current capacity.
Ensure that the power of the connected device does not exceed 25 W.
Note the instructions in your device’s operating manual.

Note -Power Delivery /QC3.0,2.0

Plug &GO: no additional software is required, simply plugin and start: Thanks to Power Delivery /QC3.0, 2.0, the voltage and power are adjusted automatically.
Be aware that, for efficient and optimized charging, your terminal device must support the PD (Power Delivery)/QC3.0, 2.0 function.
Ifyou have a large number of PD/QC-enabled devices with different firmware updates, it may be that the function is not fully supported.

Unless different instructions have been expressly given in the operating instructions for the devices you are charging, proceed as follows:

Connect your device to the charger.
Then connect the charger to the onboard electrical system’s car socket.
The charging process is displayed on your device.
Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
Then disconnect the charger from the line connection.

When charging the rechargeable batteries in the device, note the maximum charging times for the built-in batteries.

Note -car battery
With some vehicles, it can happen that power continues to be supplied even though the ignition has been switched off. You should therefore disconnect the product from the line connection when not in use to protect your car battery from being drained.

Care and maintenance

Only use soft, dry towels to clean the product.

Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Technical data

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

Service &Support
www.hama.com
+49 9091 502-0

Alllisted brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.