Hisense HV642C60 Dishwasher User Manual
- June 17, 2024
- Hisense
Table of Contents
- HV642C60 Dishwasher
- Product Information
- Specifications
- Product Usage Instructions
- Safety Instructions
- Installation
- Declaration of Conformity
- Overflow Guard
- Packaging
- Disposal
- Symbols on the Appliance
- Before Washing for the First Time
- Loading the Dishwasher
- Using the Dishwasher
- Q: How often should I top up with rinse aid and salt?
- Q: Can I wash plastic items in the dishwasher?
- Q: How can I troubleshoot common issues with the
HV642C60 Dishwasher
Product Information
Specifications
- Model: HV642C60 / HV642C60UK
- Type: Dishwasher
Product Usage Instructions
Safety Instructions
Before using the dishwasher, please read and follow the safety
instructions provided in the user manual to ensure safe
operation.
Installation
Follow the installation instructions in the user manual to
properly install the dishwasher.
Declaration of Conformity
The dishwasher complies with all applicable safety and quality
standards. The declaration of conformity can be found in the user
manual.
Overflow Guard
The dishwasher is equipped with an overflow guard to prevent
water leakage. Ensure that the overflow guard is properly installed
and functioning.
Packaging
Dispose of the packaging materials in accordance with local
regulations. Do not leave packaging materials within reach of
children.
Disposal
When disposing of the dishwasher, follow local regulations for
proper disposal methods.
Symbols on the Appliance
The dishwasher may have symbols indicating different functions.
Refer to the user manual for a detailed explanation of these
symbols.
Before Washing for the First Time
-
Check the water hardness level and adjust the dishwasher
settings accordingly. -
Perform basic settings such as selecting the desired wash cycle
and temperature. -
Ensure there is enough rinse aid and salt in the respective
compartments. -
Follow the guidelines for greener dishwashing to minimize
environmental impact. -
Learn how to save energy and water while using the
dishwasher.
Loading the Dishwasher
Proper loading of the dishwasher is essential for optimal
cleaning results. Follow these guidelines:
Fragile Dishes
Place fragile dishes such as glassware and delicate china on the
upper basket to prevent damage.
Loading Affects the Results
Ensure that dishes do not obstruct the spray arms and that water
can freely circulate. Proper arrangement of dishes will lead to
better cleaning and drying results.
The Dishwasher’s Baskets
The dishwasher comes with three baskets:
Upper Basket
This basket is designed for placing glasses, cups, and small
plates. Adjust the height of the upper basket to accommodate taller
items in the lower basket.
Lower Basket
This basket is suitable for larger plates, pots, pans, and other
bulky items. Ensure that dishes are not stacked too closely
together to allow proper water flow.
Cutlery Basket
The cutlery basket is used for storing knives, forks, spoons,
and other utensils. Place them with handles facing downwards for
better cleaning.
Using the Dishwasher
Refer to the user manual for detailed instructions on how to use
the dishwasher effectively and efficiently.
Frequently Asked Questions (FAQ)
Q: How often should I top up with rinse aid and salt?
A: The frequency of topping up rinse aid and salt depends on the
usage and water hardness level. Check the user manual for specific
guidelines.
Q: Can I wash plastic items in the dishwasher?
A: Most plastic items are dishwasher safe. However, check the
instructions on the plastic item or refer to the user manual for
any specific recommendations.
Q: How can I troubleshoot common issues with the
dishwasher?
A: The user manual provides troubleshooting information for
common issues. Follow the recommended steps to resolve any
problems.
EN
User manual Dishwasher
HV642C60 HV642C60UK
Contents
Your dishwasher ………………………………………………………………………………………………………
4
Safety instructions ……………………………………………………………………………………………………
5
Installation …………………………………………………………………………………………………………………
6
Declaration of conformity …………………………………………………………………………………………….
6
Overflow guard ………………………………………………………………………………………………………….
6
Packaging …………………………………………………………………………………………………………………
6
Disposal ……………………………………………………………………………………………………………………
6
Symbols on the appliance …………………………………………………………………………………………..
6
Before washing for the first time ……………………………………………………………………………….
7
1. Water hardness ……………………………………………………………………………………………………..
7
2. Basic settings ………………………………………………………………………………………………………..
8
Top up with rinse aid ………………………………………………………………………………………………….
8
Top up with salt …………………………………………………………………………………………………………
8
Greener dishwashing ………………………………………………………………………………………………..
9
Save energy and water ……………………………………………………………………………………………….
9
Loading the dishwasher ……………………………………………………………………………………………
10
Fragile dishes ……………………………………………………………………………………………………………. 10
Loading affects the results ………………………………………………………………………………………….. 10
The dishwasher’s baskets …………………………………………………………………………………………..
10
Upper basket …………………………………………………………………………………………………………….
10
Lower basket …………………………………………………………………………………………………………….
11
Cutlery basket …………………………………………………………………………………………………………… 12
Using the dishwasher ……………………………………………………………………………………………….
13
Add detergent …………………………………………………………………………………………………………… 13
On/Off ………………………………………………………………………………………………………………………
14
Select program ………………………………………………………………………………………………………….
14
Select option …………………………………………………………………………………………………………….. 15
Start/Stop …………………………………………………………………………………………………………………
15
If you want to load more dishes …………………………………………………………………………………… 16
Power failure ……………………………………………………………………………………………………………..
16
Once the program has finished ……………………………………………………………………………………. 16
The best drying results ……………………………………………………………………………………………….
16
Unloading the dishwasher …………………………………………………………………………………………..
16
Program chart ………………………………………………………………………………………………………….
17
Settings …………………………………………………………………………………………………………………… 18
Care and cleaning ……………………………………………………………………………………………………. 20
Top up with rinse aid ………………………………………………………………………………………………….
20
Top up with salt …………………………………………………………………………………………………………
20
Clean the filter …………………………………………………………………………………………………………… 21
Cleaning the spray arms …………………………………………………………………………………………….. 21
Clean the outside of the dishwasher …………………………………………………………………………….
22
CLn – Run the Self-clean program ………………………………………………………………………………. 22
Remove blockages …………………………………………………………………………………………………….
22
Winter storage/transport …………………………………………………………………………………………….. 23
2
Troubleshooting ………………………………………………………………………………………………………. 24
Installation ……………………………………………………………………………………………………………….
29
Safety instructions ……………………………………………………………………………………………………..
29
Setup ……………………………………………………………………………………………………………………….. 29
Drainage connection ………………………………………………………………………………………………….. 30
Connection to water supply ………………………………………………………………………………………… 30
Electrical connection ………………………………………………………………………………………………….. 30
Service …………………………………………………………………………………………………………………….
31
Number of program cycles ………………………………………………………………………………………….
31
Technical data and energy labelling ………………………………………………………………………….
32
Technical data …………………………………………………………………………………………………………… 32
Information for consumers ………………………………………………………………………………………….. 32
Information for test institute ………………………………………………………………………………………… 32
3
Your dishwasher
Install the dishwasher, see the chapter Installation. Then open the door and
press .
The first time the dishwasher is switched on, it is important that you choose
the right settings to ensure good dishwashing results. See the chapter Before
washing for the first time.
On/Off
Start/Stop
Select program
Program Eco 55° Auto 45-65° 1h 65° Intensive 70° Glass 40° Hygiene 70°
Option Delayed start Speed wash
Information on the display See the chapter Care and cleaning.
Top up with rinse aid Top up with salt CLn Run the Self-clean program
Display Special program Self-clean
NOTE! The control panel only reacts to use when the door is open.
4
Safety instructions
· Read the user manual and keep it in a safe place! · Number of standard place
settings: 14 · Never use the dishwasher for any purpose other than that
specified in these operating instructions. · Do not load the dishwasher door
or dishwasher baskets with
anything other than dishes. · Never leave the dishwasher door open as someone
may trip
on it. Push the baskets in to avoid risking the dishwasher tipping over. · Use
only dishwasher detergent! · This machine can be used by children aged 8 and
upwards, and by people with reduced physical capacity, mental ability, memory
loss or lacking experience and knowledge. These individuals must be supervised
when using the machine or have instructions on how to use the machine and
understand the risks that can occur. Cleaning of the machine must not be
carried out by children without supervision. · Damaged supply cord must only
be replaced by the manufacturer’s service centre or someone similarly
professionally qualified. · Only use the dishwasher in household-type
environments for dishwashing household dishes. All other use is prohibited. ·
Never place dishes with solvent residues in the dishwasher due to the risk of
explosion. Nor may dishes that contain ash, wax or lubricants be washed in the
dishwasher. · Children must be watched. Do not allow children to use or play
with the dishwasher. Be especially vigilant when the door is open. Some
detergent may remain inside! After adding detergent, always start the
dishwasher immediately.
WARNING!
Knives and other pointed items must be placed with the points down in the
cutlery basket or horizontally in other baskets.
5
WARNING!
Children must be supervised dishwasher detergent is corrosive!
Installation
See the chapter Installation.
Declaration of conformity
We hereby declare that this appliance is in conformity with the relevant
European directives and the requirements of the relevant standards.
Overflow guard
The overflow guard starts pumping out the water and turns off the water supply
if the water level in the dishwasher exceeds the normal level. If the overflow
guard is triggered, F54 (Overfilling water) appears on the display. Turn off
the water tap and contact your nearest service centre. (To avoid water leakage
outside the dishwasher, do not remove the plug from the wall socket until the
water tap on the supply line has been turned off!)
Packaging
The outer packaging protects the product during transport. The packaging
material is recyclable. Separate the different packaging materials to help
reduce raw material use and waste. Your dealer can take the packaging for
recycling or direct you to the nearest recycling centre. The packaging is
comprised of:
· Corrugated cardboard made from up to 100% recycled material. · Expanded
polystyrene (EPS) with no added chlorine or fluorine. · Supports made from
untreated wood. · Protective plastic made from polyethylene (PE).
Disposal
The dishwasher is manufactured and labelled for recycling. When the dishwasher
has reached the end of its service life and is to be disposed of, it should
immediately be made unusable. Pull out the power cable and cut it as short as
possible.
Contact your local authority for information about where and how your
dishwasher should be correctly recycled.
Symbols on the appliance
Read the user manual.
Recycle as electrical waste.
Approved in accordance with the relevant EU directives.
Approved in accordance with the relevant UK legal requirements.
6
Before washing for the first time
1. Water hardness
In order to achieve good dishwashing results, the dishwasher needs soft water
(water with low mineral content). Hard water leaves a white coating on dishes
and the dishwasher.
Checking water hardness
Water hardness is specified using German degrees of water hardness (°dH),
French degrees of water hardness (°fH), English degrees of water hardness
(°eH) or millimoles per litre (mmol/l).
A water supply with a water hardness in excess of 5°dH (9°fH / 6°eH / 0.9
mmol/l) must be softened. This is done automatically with the aid of the
built-in water softener. In order for the water softener to function properly,
its settings must be adjusted to the hardness of the water supply. Once you
have adjusted the water softener settings, add detergent and rinse aid in
doses suitable for soft water.
Contact the local waterworks to check the water hardness in your area.
Make a note of the water hardness:____
°dH 0-5 6-8 9-11 12-14 15-19 20-24 25-29 30-39 40-49 50
°fH 0-9 10-14 15-20 21-25 26-34 35-43 44-52 53-70 71-88 89
°eH 0-6 7-10 11-14 15-18 19-24 25-30 31-36 37-49 50-61 62
mmol/l 0.0-0.9 1.0-1.4 1.5-2.0 2.1-2.5 2.6-3.4 3.5-4.3 4.4-5.2 5.3-7.0 7.1-8.8 8.9
Recommended setting 4:00 4:01 4:02 4:03 4:04 4:05 4:06 4:07 4:08 4:09
If the water hardness exceeds 50°dH (89°fH / 62°eH / 8.9 mmol/l), we recommend
connecting an external water softener.
Increased consumption during regeneration
The dishwasher’s built-in water softener is regularly regenerated to maintain
its function. Regeneration extends the dishwashing program and increases
energy and water consumption. Just how often the dishwasher’s water softener
is regenerated depends on the selected setting.
Example: If the Eco 55° program is run with a water hardness of 14°dH (25°fH /
18°eH / 2.5 mmol/l), the water softener is regenerated at regular intervals
(after 7 dishwashing cycles), energy consumption increases by 0.015 kWh, and
water consumption increases by 2.3 litres, while the program time is extended
by 3 minutes. Regeneration takes place during the program’s main wash.
WARNING! Hard water leaves a white coating on dishes and inside the
dishwasher. It is therefore important that you select the right setting for
the water softener! See Water hardness in the chapter Settings.
Never run the dishwasher with an empty salt compartment if the water supply
has a water hardness in excess of 5°dH (9°fH / 6°eH / 0.9 mmol/l).
7
2. Basic settings
The first time the dishwasher is switched on, it is important that you choose
the right settings to ensure good dishwashing results. See page 18.
Set up:
· Rinse aid · Water hardness · TAB (All-in-one detergent)
3. Top up with rinse aid
Lift up to open
Press to close
Drying is faster and a better result is achieved if you use rinse aid. You
will also achieve a better dishwashing result with clear and spotless dishes.
Top up the rinse aid compartment with rinse aid if you have selected Rinse aid
3:01 – 3:05.
1. Open the rinse aid compartment lid. 2. Carefully top up with rinse aid to
the level marked MAX. 3. Wipe up any splashes of rinse aid around the
compartment. 4. Close the lid firmly.
When the rinse aid needs topping up, the symbol lights on the display.
4. Top up with salt
For a water supply with a hardness above 5 °dH (9 °fH / 6 °eH / 0.9 mmol/l),
fill with salt.
Add salt to the salt compartment if you have selected Water hardness 4:01 –
4:09.
1. Remove the salt compartment lid by turning it anticlockwise. 2. Place the
funnel supplied with the dishwasher in the salt compartment top-up hole.
Before washing
for the first time, pour in about 1 l of water. (Water is only needed the
first time.) 3. Add enough salt to fill the salt compartment (max. 750 gram).
Use special dishwasher salt. 4. Wipe away excess salt and turn the lid
clockwise until in the closed position. When the salt needs topping up, the
symbol lights on the display.
WARNING! In order to avoid rust stains a dishwashing program must be started
immediately after adding salt.
8
Greener dishwashing
Save energy and water
When using a dishwasher in a residential setting, less energy and water are
generally used compared to washing the dishes by hand.
Do not rinse under running water
Do not rinse the dishes under running water as this will lead to increased
energy and water consumption. Simply scrape off large food particles before
loading the dishwasher.
Choose a green detergent
Read the environmental declaration on the packaging!
Too much detergent, rinse aid and salt can result in less effective
dishwashing and also entail greater environmental impact.
Run a fully loaded dishwasher
Save energy and water by waiting until the dishwasher is full before running a
program (see number of standard place settings). Use the 1h 65° program with
the Speed wash option to rinse the dishes if there are any unpleasant odours.
Run programs at a lower temperature
If the dishes are only slightly dirty, you can select a program with a low
temperature.
Select dishwashing program Eco 55°
This program is suitable for washing normally soiled dishes and is the most
effective program in terms of combined energy and water consumption. This
program is used to assess compliance with EU legislation on ecodesign.
The dishwashing program is designed for an effective wash using as little
energy and water as possible. The program washes at a low temperature for a
long time.
Activate the setting Auto Dry
A shorter dishwashing program and better drying results are achieved if you
activate the Auto Dry setting, which automatically opens the dishwasher door.
Wait until the dishwasher indicates that the program has ended and the dishes
have cooled before unloading the dishwasher. (If the dishwasher is built-in,
the surrounding furnishings must be resistant to any condensation from the
dishwasher.)
Connect to cold water
Connect the dishwasher to the cold water supply if the building is heated
using oil, electricity or gas.
Connect to hot water
Connect the dishwasher to the hot water supply (max. 70 °C) if the building is
heated using an energy-efficient means such as district heating, solar power
or geothermal power. Choosing a hot water connection reduces the dishwasher’s
energy consumption.
NOTE! Do not exceed the permitted water supply temperature. Certain materials
used in some cookware cannot withstand high heat. See Fragile dishes in the
chapter Loading the dishwasher.
9
Loading the dishwasher
Fragile dishes
Some cookware is not dishwasher safe. This can be for several reasons. Some
materials cannot withstand high heat, others can be damaged by dishwasher
detergent. Exercise caution with, for example, handmade items, fragile
decoration, crystal/glassware, silver, copper, tin, aluminium, wood and
plastic. Look for the “Dishwasher safe” marking.
Loading affects the results
Load the dishes carefully to ensure the best washing and drying results with
the lowest possible energy and water consumption. Give your dishwasher the
best chance to reach and clean all surfaces, as well as to dry the dishes as
thoroughly as possible. · All dirty surfaces should face inwards and
downwards! · Dishes should not be placed in or on each other. · Angle dishes
with hollows, such as cups, so that the rinse water will run off. This is also
important
for plastic items. · Make sure small items cannot fall through the dishwasher
basket; place them in the cutlery basket.
The dishwasher’s baskets
The dishwasher is equipped with an upper basket and a lower basket with a
cutlery basket. The appearance of the baskets may differ depending on the
dishwasher setup.
Upper basket
Place glasses, cups, bowls, side plates and saucers in the upper basket. All
dirty surfaces should face inwards and downwards! Wine glasses are placed on
the wine glass shelf and knives are placed in the knife stand on the right.
10
Knife stand
3 positions
Raising and lowering the upper basket
1. Pull out the upper basket. 2. Grab the sides of the upper basket with both
hands and lift it up. 3. If the upper basket is raised while in the top
position, it will drop to the bottom position.
Note that both sides of the basket must always be set to the same height.
Lower basket
Place plates, side plates, serving dishes, pots and cutlery (in the cutlery
basket) in the lower basket.
11
Adjustable plate supports
The adjustable plate supports can be folded down to make it easier to load
pots and bowls.
Cutlery basket
Place cutlery with the handles facing down, except for knives, and spread them
out as much as possible. Ensure that spoons do not stack inside each other.
Place the cutlery basket in the lower basket.
Cutlery basket with lid
The cutlery basket lid can be removed.
Flexible cutlery basket
The cutlery basket is flexible and can be separated into two parts, which can then be attached to the side of the lower basket.
NOTE! Check that the spray arms can rotate freely.
12
Using the dishwasher
Add detergent
Follow the instructions on the detergent packaging. This dishwasher is fitted
with a water softener, so use detergent and rinse aid doses suitable for soft
water.
Too much detergent can result in less effective dishwashing and also entails greater environmental impact.
Detergent compartment
The detergent compartment must be dry when adding detergent.
Prewash detergent
Main wash detergent
If powder or liquid dishwasher detergent is used, add a small amount of the detergent to the compartment for prewash detergent.
Press to open
Close the lid
NOTE! Use only dishwasher detergent! Washing up liquid must not be used as the
foam that forms prevents the dishwasher from operating effectively.
All-in-one detergent
There are many types of all-in-one detergents on the market. Read through the
directions for these products carefully.
Activate the TAB setting when using an all-in-one detergent that contains
rinse aid.
Dishwasher tablets are not recommended for short programs (less than 75
minutes). Use powder or liquid dishwasher detergent instead.
NOTE! Optimal washing and drying results are achieved by using normal
detergent together with separately dispensed rinse aid and salt.
Contact the detergent manufacturer if you have questions about the detergent.
13
On/Off
Start/Stop
Select program
Display
NOTE! The control panel only reacts to use when the door is open.
On/Off
Open the door and press . Also turn on the water tap if it is turned off.
Select program
Select a program to suit the type of dishes and how dirty they are. Eco 55° is
always pre-selected.
Press one or more times until the desired program is activated, which is
indicated by an indicator light.
Eco 55°
This program is suitable for washing normally soiled dishes and is the most
effective program in terms of combined energy and water consumption. This
program is used to assess compliance with EU legislation on ecodesign.
You can read more about greener dishwashing in the chapter Greener
dishwashing.
For heavily soiled dishes with a lot of grease, a program with higher
temperatures should be used.
Auto 45-65°
The dishwasher can measure how dirty the dishes are and adjust water
consumption and temperature accordingly. When newly installed, the program
needs to be run five times before it is fully adapted and can provide the best
results.
1h 65°
A quick program for slightly dried leftovers. (This program is not intended
for burnt food, such as on oven dishes.)
The Auto Dry option is important for ensuring the best drying results.
Intensive 70°
A program with a high temperature for dissolving grease on very dirty dishes,
such as pans, casserole dishes and oven dishes. If these dishes do not
completely fill the dishwasher, you can add plates and other dishes.
14
Glass 40°
A gentle dishwashing program with a low temperature for washing fragile items
made of crystal/glass. Remember to use a small amount of detergent and to
place items so that they do not touch each other during the wash. See also
Fragile dishes in the chapter Loading the dishwasher. Porcelain that has just
been used without dried leftovers can also be washed using this program.
Hygiene 70°
This program is ideal to use where demands on hygiene are extra high, e.g. for
baby bottles and
cutting boards. The temperature is high both in the main wash and in the final
rinse.
Self-clean
Self-cleaning program for hygienic cleaning of the dishwasher tub, spray arms
and spray pipes.
This program should be run (with no dishes in the machine) using normal
dishwasher detergent or citric acid. Special dishwasher cleaners are also
available on the market. For the removal of limescale deposits, see Dishwasher
tub in the chapter Care and cleaning.
NOTE! CLn The dishwasher will indicate at regular intervals that Self-clean
needs to be run.
Press and hold
until CLn is shown on the display to select the program.
Select option
Press the options ( , ) to activate them. (The available options vary between
programs.)
Delayed start
When you select Delayed start, the dishwasher will start 1-24 hours after you
have pressed and closed the door.
1. Press once to activate Delayed start. Press several times, or hold it in,
to set the desired number of hours. The time for Delayed start is shown on the
display.
2. Press . Close the door. The timer counts down and the dishwasher starts
after the selected delay.
If you want to cancel the Delayed start option, open the door then press and
hold for three seconds.
Not available for: Self-clean
Speed wash
This option shortens the program time, but uses more energy and water.
Press to activate the option. The program time is updated on the display.
Not available for: Auto 45-65°, Glass 40°, Hygiene 70°, Self-clean
Start/Stop
Press . The display will start to flash, indicating that the dishwasher is
ready to start. Close the door properly, otherwise the dishwasher will not
start.
15
Stopping or changing a program
Open the door. If you want to interrupt or change the program after starting
the dishwasher, press and hold for three seconds. Top up with new detergent if
the lid of the detergent dispenser has opened. Then select a new program,
press and close the door.
Remaining time
Once you have chosen a program and options, the time the program took when
last used is displayed.
If you want to load more dishes1)
Open the door. The dishwasher stops automatically. Add the dishes and close
the door. After a while, the dishwasher continues the program.
Power failure
If the dishwasher is turned off due to a power failure when a dishwashing
program is running, the program continues when power is restored. If the power
is cut during drying, the program is interrupted. If you open the door for
more than 2 minutes during drying, the program will be interrupted.
Once the program has finished
The end of the program is indicated by one short signal from the buzzer. The
chapter Settings describes how to change this function. Once the dishwasher
door is opened and the program has finished “End” appears on the display. The
dishwasher switches off automatically after the program ends. Shut off the
water tap after each use (if required by your insurance company).
The best drying results
· Fully load the dishwasher. · Angle dishes with hollows, such as cups, so
that the rinse water will run off. This is also important
for plastic items. · Top up with rinse aid or increase the rinse aid dosage
setting. · Activate the Auto Dry setting. See the chapter Settings. · Allow
the dishes to cool before unloading the dishwasher.
Unloading the dishwasher
Hot porcelain is more fragile. Leave the dishes to cool in the dishwasher
before unloading them. Unload the lower basket first to avoid any water drops
from the upper basket falling onto the dishes in the lower basket.
- You should not load more dishes if the lid of the detergent dispenser has
been opened.
16
Program chart
Program
Detergent (ml) Option
Eco 55° 2)
25
Auto 45-65°
25
1h 65°
25
Number
Main wash
of prewashes
Number of rinses
Final rinse
55 °C
2
49 °C
1-2
45-65 °C
2-3
60 °C
65 °C
3
65 °C
Consumption values 1)
Dishwashing
Energy
time
(approx. kWh)
(approx. hrs:min)
Water cons. (liter)
3:10
0.74
9.7
2:10-3:10
0.9-1.4
12.0-19.0
1:00
1.1
13.0
Intensive 70°
25
2
70 °C
2
70 °C
2:50
1.6
15.5
Glass 40°
20
40 °C
2
50 °C
1:40
0.7
10.0
Hygiene 70°
25
70 °C
2
70 °C
1:05
1.3
9.5
- Consumption values vary depending on the temperature of the incoming water, room temperature, load size, selected additional functions and more. The values for the Eco 55° program are accurate, others are indicative only. The dishwasher’s built-in water softener is regularly regenerated to maintain its function. Regeneration extends the dishwashing program and increases energy and water consumption. Just how often the dishwasher’s water softener is regenerated depends on the selected setting.
- This program is suitable for washing normally soiled dishes and is the most effective program in terms of combined energy and water consumption. This program is used to assess compliance with EU legislation on ecodesign.
- Auto Dry. See the chapter Settings.
17
Settings
1. Open the door and press . 2. To open the dishwasher’s settings menu, press
and hold and
display. 3. Press to step through the settings menu. 4. Press to step through
the alternatives. 5. Confirm the selected setting by pressing . 6. To exit the
menu, step through it or press .
until SEt is shown on the
Open the dishwasher’s settings menu
Select alternative
Confirm / Next setting
Settings Sounds Rinse aid
Water hardness
Alternatives
2:00 – 2:03 (2:00 Off)
A beep confirms that the control panel has been pressed. A beep indicates when a dishwashing program has ended. Error messages are always indicated by a loud buzzer.
3:00 – 3:05 (3:00 Off)
Setting for rinse aid dosage. The rinse aid dispenser can be adjusted between 3:00 (Off) and 3:05 (High dosage). Increase the rinse aid dosage:
· If the dishes have water marks.
Decrease the rinse aid dosage:
· If the dishes have a sticky white/blue film. · If the dishes are streaked. ·
Build-up of foam. If you have very soft water, the rinse
aid can be diluted 50:50 with water.
4:00 – 4:09 (4:00 Off)
Pre-selected at factory: 3:04
Adjusting the water softener. Select a setting depending on the hardness of
the water supply. It is important that this setting is correct! See 1Water
hardness in the chapter Before washing for the first time. For a water supply
with a hardness above 5 °dH (9 °fH / 6 °eH / 0.9 mmol/l), fill with salt. For
a water supply with a hardness below 6°dH (10°fH / 7°eH / 1.0 mmol/l), select
4:00. The water softener is deactivated and no salt needs to be added. Pre-
selected at factory: 4:04
18
Settings TAB (All-in-one detergent)
Auto Dry
Error readout Restore factory defaults Exit
Alternatives
5:00 (Off) 5:01 (On)
Activate this setting when using an all-in-one detergent that contains rinse aid. This setting reduces the rinse aid dosage and affects how often the dishwasher’s built-in softener is regenerated. Pre-selected at factory: 5:00
6:00 (Off) 6:01 (On)
The dishwasher door opens automatically, which shortens the program time and improves the drying results. Wait until the dishwasher indicates that the program has ended and the dishes have cooled before unloading the dishwasher. (If the dishwasher is built-in the surrounding furnishings must be resistant to any condensation from the dishwasher.) Not available for: Hygiene 70°, Self-clean Auto Dry is pre-selected and cannot be deactivated for the Eco 55° program.
F–
Any error messages.
When contacting the service department, you may be asked
to provide the most recent error messages.
rSt
Restores all settings to the factory defaults.
Select rSt and confirm by pressing .
End
To exit the dishwasher’s settings menu, select End and
press .
(The menu closes automatically after three seconds.)
19
Care and cleaning
Top up with rinse aid
When the rinse aid needs topping up, the above symbol lights on the display.
Lift up to open
Press to close
1. Open the rinse aid compartment lid. 2. Carefully top up with rinse aid to
the level marked MAX. 3. Wipe up any splashes of rinse aid around the
compartment. 4. Close the lid firmly. After topping up, it may take a while
before the symbol goes out.
Top up with salt
When the salt needs topping up, the above symbol lights on the display.
1. Remove the salt compartment lid by turning it anticlockwise. 2. Place the
funnel supplied with the dishwasher in the salt compartment top-up hole.
(Water is only
needed the first time.) 3. Add enough salt to fill the salt compartment (max.
750 gram). Use special dishwasher salt. 4. Wipe up any excess salt so that the
lid can be screwed on firmly. After topping up, it may take a while before the
symbol goes out.
WARNING! In order to avoid rust stains a dishwashing program must be started
immediately after adding salt. Never pour dishwasher detergent into the salt
compartment. This destroys the water softener!
20
Clean the filter
The filter traps larger food particles, which cannot get past the drainage
pump. Empty the filter when necessary. It should be cleaned at regular
intervals depending on how often the dishwasher is used.
1. Turn the locking ring anticlockwise and lift the filter straight up. 2.
Empty and clean the filter. 3. Refit the filter and turn the locking ring
clockwise to its stop position. Check that the edges seal
properly. NOTE! Dishwashing results may be affected if the filter is fitted
incorrectly. The dishwasher must not be used without the filter in place!
Check that the yellow drainage pump stop (on the right in the bottom drain) is
in place.
Cleaning the spray arms
Holes and bearings can sometimes become blocked. Remove any debris using a pin
or the like. The spray arms also have holes underneath.
To facilitate cleaning you can remove the spray arms. Remember to fit them
firmly back into place afterwards.
Upper spray arm
· Pull out the upper basket. · Unscrew the spray arm bearings anticlockwise to
remove the spray arm from the upper basket.
21
Lower spray arm
· Pull the lower spray arm straight up to release it.
Clean the outside of the dishwasher
Door and door seal
Open the door. Clean the sides of the door and the door seal regularly with a
slightly damp cloth. Clean the door seal at the lower front edge of the
dishwasher with a washing-up brush.
Control panel
Keep the control panel clean. If necessary, wipe it with a dry or slightly
damp cloth. Never use cleaning products they may scratch the surface.
CLn – Run the Self-clean program
Dishwasher tub
The dishwasher tub is made of stainless steel and is kept clean through normal
use (when used regularly). If you have hard water, limescale deposits may
build up in the dishwasher. If this happens, run the Self-clean program with
two tablespoons of citric acid in the detergent compartment (with no dishes in
the machine). Special dishwasher cleaners are also available on the market.
Remove blockages
Unblocking the drainage pump
If the dishwasher still contains water after the program has finished,
something may be blocking the drainage pump, which results in the Water outlet
fault error message. 1. Turn off the machine using and remove the plug from
the wall socket. 2. Remove the filter. 3. Scoop out the water from the
dishwasher tub. 4. In order to inspect the drainage pump, remove the yellow
drainage pump stop on the right in the
bottom drain. (Use a pair of pliers if necessary.) 5. Turn the pump wheel
located behind the drainage pump stop by hand. Carefully remove any sharp
items, such as glass. 6. Refit the drainage pump stop. Refit the filter.
22
7. Plug the machine in again.
Drainage pump stop
NOTE! Do not forget to refit the drainage pump stop.
Unblocking the inlet hose filter
If the water supply contains small particles, the outer filter on the inlet
hose may become blocked, which results in the Water inlet fault error message.
- Turn off the machine using and remove the plug from the wall socket. 2.
Turn off the water tap. 3. Unscrew the inlet hose. 4. Carefully remove the
outer filter from the inlet hose and clean it. 5. Refit the filter and check
that the gasket is correctly positioned. 6. Screw the inlet hose firmly into
place. 7. Plug the machine into the wall socket and turn on the water tap.
Allow the pressure to settle for
a while and check that the connection is watertight.
Outer filter on inlet hose Gasket
Winter storage/transport
Store the dishwasher above freezing temperature and avoid long transport distances in very cold weather. Transport the dishwasher upright or laying on its back. Before transporting a used dishwasher, or before prolonged storage, water must first be removed from the machine.
23
Troubleshooting
Error messages F10 Overfilling water F11 Water outlet fault
F12 Water inlet fault
F40 Inlet valve leakage F41 Heater fault 1 F54 Overfilling water
F67 Water inlet fault
Action
Unblocking the drainage pump. See the chapter Care and cleaning. If the
problem persists, contact your nearest service centre.
See “Water remains in the dishwasher” under “Problem” in the table below. If
the problem persists, contact your nearest service centre.
Check that the water tap is on. Check that the outer filter on the inlet hose
is not blocked. See Unblocking the inlet hose filter in the chapter Care and
cleaning. If the problem persists, contact your nearest service centre.
Turn off the water tap and contact your nearest service centre.
Turn off the water tap. Remove the plug from the wall socket and contact your
nearest service centre.
Turn off the water tap and contact your nearest service centre. To avoid water
leakage outside the dishwasher, do not remove the plug from the wall socket
until the water tap on the supply line has been turned off!
Check that the water tap is on. Check that the outer filter on the inlet hose
is not blocked. See Unblocking the inlet hose filter in the chapter Care and
cleaning. If the problem persists, contact your nearest service centre.
Press any button to clear the error message.
Problem
Possible causes
Action
The control panel does not react You have pressed the control Wait a moment then try again.
when pressed.
panel too soon after opening the
door.
The door is closed.
Open the door. The control panel only reacts to use when the door is open.
Dirt on the control panel.
Clean with a dry or slightly damp cloth.
The control panel requires calibration.
Turn off the water tap. Remove the plug from the wall socket and wait for 60 seconds. Then plug the appliance back into the wall socket and turn on the water tap.
Cannot close door.
The baskets are not correctly Check that the baskets are cor-
positioned.
rectly positioned horizontally.
Check that the dishes are not blocking the baskets from sliding properly into place.
24
Problem The dishwasher does not start.
The dishes are not clean.
Possible causes The door lock does not click into place and lock.
has not been pressed. The door is not properly closed. You have opened the
dishwasher to add more dishes while a program is in progress. The door lock
has not clicked into place and locked.
Check whether the Delayed start option has been selected. The plug is not
plugged into the wall socket. A fuse/circuit breaker has been tripped. The
spray arms do not rotate. Spray arm holes or bearings blocked. Unsuitable
dishwashing program.
Incorrect detergent dosage.
Old detergent. Detergent is a perishable product.
Action
Check the door lock. If it does not click into place and lock, open the door.
Press and hold and until the display starts counting down. Wait until the
countdown ends (60 seconds). Close the door. Check that the door lock clicks
into place and locks.
Press . The display starts counting down.
Check.
Close the door and wait. After a while, the dishwasher continues the program.
Check the door lock. If it does not click into place and lock, open the door.
Press and hold and until the display starts counting down. Wait until the
countdown ends (60 seconds). Close the door. Check that the door lock clicks
into place and locks.
Press and hold for three seconds if you want to cancel the Delayed start
option.
Check.
Check.
Check that the dishes are not blocking the spray arms.
Clean the spray arms. See the chapter Care and cleaning.
Select a program with a high temperature to dissolve grease on very dirty
dishes, such as Intensive 70°.
Dose according to water hardness. Far too much or far too little detergent
results in poorer dishwashing results.
Avoid large packages.
25
Problem
Spots on stainless steel or silver. Spots or films on the dishes.
Possible causes
Action
Dishes loaded incorrectly.
Do not cover porcelain with large bowls or the like. Avoid placing very tall glasses in the corners of the baskets. See the chapter Loading the dishwasher.
Glasses and cups have toppled Place dishes to sit steady. over during the program.
The filter is clogged.
Clean the filter.
The filter is not fitted correctly. Check that the filter is fitted correctly. See the chapter Care and cleaning.
Drainage pump stop missing.
Check that the yellow drainage pump stop (on the right in the bottom drain) is in place. See the chapter Care and cleaning.
Some foodstuffs, such as mustard, mayonnaise, lemon, vinegar, salt and dressings, can cause spots on stainless steel if left for too long.
Rinse off these types of foodstuffs if not starting the dishwasher immediately. Consider using 1h 65° with the Speed wash option.
All stainless steel can cause spots on silver if they come into contact during dishwashing. Aluminium can also cause spots on dishes.
In order to avoid marks and tarnishing, separate dishes made from different metals, such as silver, stainless steel and aluminium.
Incorrect rinse aid dosage set- See the chapter Settings. ting.
The setting TAB is activated and all-in-one detergent with insufficient drying effect is being used.
Switch all-in-one detergents or deactivate the TAB setting and top up with salt and separate rinse aid. See Rinse aid in the chapter Settings.
Salt compartment empty.
Top up with salt. See the chapter Before washing for the first time.
Incorrect water softener setting. See Water hardness in the chapter Settings.
The water softener is leaking salt.
Check that the salt compartment lid is properly tightened. Otherwise contact your nearest service centre.
Too high temperature and/or too much detergent can cause etching on crystal. Unfortunately, this cannot be repaired, only prevented.
Wash crystal at a low temperature and with a conservative amount of detergent. Contact the detergent manufacturer.
26
Problem
Possible causes
Action
The dishes have a sticky white/blue film.
Rinse aid dosage setting too high.
Reduce the dosage. See the chapter Settings. If you have very soft water, you may want to dilute the rinse aid 50:50 with water.
Spots left after washing.
Lipstick and tea/coffee stains Use a detergent with a bleach-
can be difficult to remove.
ing agent.
Detergent residue in the deter- The detergent compartment The detergent compartment
gent compartment after dish- was damp when adding deter- must be dry when adding deter-
washing.
gent.
gent.
The detergent compartment has Check that the dishes are not
been blocked.
preventing the detergent com-
partment from opening.
Rattling sound when dishwashing.
The dishes are not correctly placed or the spray arms are not rotating.
Check that the dishes are placed securely. Spin the spray arms to make sure they can rotate.
Water remains in the dishwash- The filter is clogged.
er.
The filter is not fitted correctly.
Clean the filter.
Check that the filter is fitted correctly. See the chapter Care and cleaning.
Debris in the drainage pump. Clean the drainage pump. See the chapter Care and cleaning.
Drainage pump stop missing.
Check that the yellow drainage pump stop (on the right in the bottom drain) is in place. See the chapter Care and cleaning.
Kink in drainage hose.
Check that the hose is free from kinks and sharp bends.
Blocked drainage hose.
Disconnect the drainage hose where it connects to the sink unit’s water trap. Check that no debris has fastened and that the connection has an inner diameter of at least 14 mm.
Bad odour in dishwasher.
Dirt around the seals and in corners.
Clean with washing-up brush and low foaming cleaner.
Low temperature programs have been selected for a prolonged period.
Run a program with a high temperature once or twice a month. Or run a self- cleaning program. See Self-clean in the chapter Using the dishwasher.
27
Problem
Possible causes
Action
Grease deposits in the dishwasher.
Low temperature programs have been selected for a prolonged period.
Select a program with a high temperature to dissolve grease on very dirty dishes, such as Intensive 70°. Or run a self-cleaning program. See Self-clean in the chapter Using the dishwasher.
The dishes are not dry enough. The Auto Dry setting has not been activated.
Activate the Auto Dry setting. See the chapter Settings.
The dishwasher is not fully loaded.
Fully load the dishwasher.
Rinse aid needs topping up or dosage is set too low.
Top up with rinse aid or increase the rinse aid dosage setting.
The setting TAB is activated and all-in-one detergent with insufficient drying effect is being used.
Switch all-in-one detergents or deactivate the TAB setting and top up with salt and separate rinse aid. See Rinse aid in the chapter Settings.
28
Installation
It is important that you read through and follow the instructions and
directions below. Conduct installation and connection in accordance with the
separate installation instructions.
[mm]
*Remove the plastic strips if the recess dimension is 596-598 mm. Exercise caution! The edges may be sharp. Wear protective gloves!
**Cover door length.
Nominal dimensions. Actual measurements may vary.
Safety instructions
· Connections to electricity, water and drainage must be performed by a
qualified professional. · Always follow applicable regulations for water,
drainage and electricity. · Take care during installation! Wear protective
gloves! There must always be two people! · Place a drip tray on the floor
beneath the dishwasher to prevent damage from any water leaks. · Before
screwing the dishwasher into place, test the dishwasher by running the 1h 65°
program
with the Speed wash option. Check that the dishwasher fills with water and
drains. Check also that none of the connections leak.
WARNING! Turn off the water supply when installing the dishwasher!
The plug must be disconnected or power to the socket turned off while the work
is carried out!
Setup
· The recess and connection dimensions are included in the separate
installation instructions. Check that all dimensions are correct before
starting the installation. Note that the height of the cover door can be
adjusted to match other fittings.
· Make sure the area on which the dishwasher is to be installed is firm.
Adjust the adjustable feet so that the dishwasher is level.
· If the dishwasher is built-in the surrounding furnishings must be resistant
to any condensation from the dishwasher.
29
· Check that the machine is installed such that the door opens freely,
otherwise door lock functionality may be disrupted.
· Note that the door springs may need adjusting after a cover door has been
fitted. Adjust the left and right door springs equally until the door is
evenly balanced.
Drainage connection
This dishwasher is suitable for installing in a raised recess (to attain an
ergonomic working height). This means that the dishwasher can be placed so
that the drainage hose runs to a lower level than the bottom of the
dishwasher, such as by routing it directly to a floor drain. The drainage hose
can also be connected to a connection nipple on the sink unit’s water trap.
The connection nipple must have an internal diameter of at least 14 mm. The
drainage hose may be extended by a maximum of 3 m (the total length of the
drainage hose must not exceed 4.5 m). Any joints and connecting pipes must
have an internal diameter of at least 14 mm. No part of the drainage hose may
be more than 950 mm above the bottom of the dishwasher. Attach the drainage
hose with a hose clamp. Ensure that the drainage hose has no kinks.
Connection to water supply
Use only the inlet hose supplied with the dishwasher. Do not re-use old or
other spare hoses. The supply pipe must be fitted with a water tap (stopcock).
The water tap must be easily accessible, so that the water can be shut off if
the dishwasher has to be moved. Once the installation is complete, turn on the
water tap and allow the pressure to settle for a while. Check that all
connections are watertight.
Connection to cold water supply
Connect the dishwasher to the cold water supply if the building is heated
using oil, electricity or gas.
Connection to hot water supply
Connect the dishwasher to the hot water supply (max. 70 °C) if the building is
heated using an energy-efficient means such as district heating, solar power
or geothermal power. Choosing a hot water connection reduces the dishwasher’s
energy consumption.
NOTE! Do not exceed the permitted water supply temperature. Certain materials
used in some cookware cannot withstand high heat. See Fragile dishes in the
chapter Loading the dishwasher.
Electrical connection
Information about the electrical connection can be found on the serial number
plate. This specification must match the electricity supply. The dishwasher
must be connected to an earthed socket. The electric wall socket must be
placed outside of the installation area to be easily accessible after
installing the dishwasher. Do not use an extension cord!
30
Service
Read the chapter Troubleshooting before contacting the service centre. If you
have encountered a problem that you cannot resolve, please contact your
nearest service centre for professional help, see global.hisense.com. Our
website also has information about spare part availability and what you can
repair yourself. When making contact, provide the details on the serial number
plate. Include the article number (1) and the serial number (2). Please note
that non-professional repairs may risk user safety and affect the warranty.
1 2
Number of program cycles
Press and hold and for 3 seconds to show Number of program cycles on the
display. (If the dishwasher has completed more than 999 cycles, the number of
thousands is displayed followed by the number of cycles up to 999. For
example: 1234 cycles is displayed as 001 followed by 234.)
31
Technical data and energy labelling
Technical data
Height: Width: Depth: Weight: Number of standard place settings: Water
pressure: Electrical connection: Rated power:
- Weight can vary due to different specifications.
- In accordance with the EN 60436 standard.
816-890 mm 598 mm 555 mm 30 kg 1) 14 2) 0.03-1.0 MPa See the serial number plate See the serial number plate
Information for consumers
Information about your appliance can be found at global.hisense.com. You can
also find information in the EU Product Registration database for Energy
Labelling, EPREL. Scan the QR code on the energy label supplied with the
dishwasher (or go to https://eprel.ec.europa.eu and search for the model
name).
Information for test institute
Information about this product can be found in the European Product Database
for Energy Labelling, EPREL, and can also be ordered by e-mail dishwashers
@appliance-development.com.
The request should include the details on the serial number plate. Include the
article number (1), the serial number (2) and the model name (3).
1
3
2
32
Your notes
33
Your notes
34
Your notes
35
921639-a2 We reserve the right to make changes.