SleepPhones SB8BM-US Bluetooth Wireless Headphones User Guide

SleepPhones SB8BM-US Bluetooth Wireless Headphones

Prouct Information

Specifications

• Model: AS-B-UG-01
• Wireless Headphones
• Bluetooth Version: Unknown
• Charging Time: Up to 3 hours
• Operating Range: Up to 3 feet (1 meter)

Product Usage Instructions

Wearing Your Wireless Headphones

1. 1. Place the headband on your head with the tag at the back of your head.

2. Adjust the speakers so they are positioned directly over your ears for optimal sound quality.

Note: The speakers move independently inside the headband.

Basic Wireless Headphone Usage

Power On: Press and hold the center button for 5 seconds.

Skip Tracks: Double click the up or down arrow buttons to skip tracks.

Volume: Click the up or down arrow buttons to increase or decrease the volume.

Play/Pause: Click the center button once to play or pause.

Pairing Your Wireless Headphones

1. Hold down the square button for 5 seconds until you hear ascending tones through the speakers.
2. You will then hear a series of double beeps and see a fast blinking red light on the headphones. Make sure your device is within 3 feet (1 meter) of the headphones.

Charging Instructions

1. Open the hook and loop at the back of the headband to reveal the speaker components.
2. Remove the speakers from the headband.
3. Plug in the charging module and wait until the red light disappears, indicating a full charge.
4. We recommend charging the headphones after every use (charging typically takes up to 3 hours).

Washing Instructions

1. Open the hook and loop at the back of the headband to reveal
   the speaker components inside.

2. Remove the speakers one at a time from the headband.

3. Machine-wash the headband.

4. Reinsert one speaker at a time, positioning each about four inches from the hook and loop opening on either side of the headband.

Troubleshooting

Unable to Pair for the First Time? When turning on the module, make sure to continue holding down the button for a full 5 seconds until you hear ascending tones followed by a series of beeps, indicating that the module is in pairing mode.

No Sound When Paired? Try adjusting the volume on both your device and the headphones. Ensure that the headphones are within the operating range of your device (up to 3 feet/1 meter).

Frequently Asked Questions

Q: Can I wash the speakers along with the headband?

A: No, you should remove the speakers before washing the headband.

Q: How long does it take to fully charge the headphones?

A: Charging typically takes up to 3 hours.

Q: What should I do if I can’t pair the headphones for the first time?

A: Make sure to continue holding down the button for a full 5 seconds until you hear ascending tones followed by a series of beeps, indicating that the module is in pairing mode.

Q: Why is there no sound when the headphones are paired?

A: Try adjusting the volume on both your device and the headphones. Ensure that the headphones are within the operating range of your device (up to 3 feet/1 meter).

Welcome to the AcousticSheep® Family!
This User Guide has helpful tips and info for using and enjoying your new AcousticSheep® SleepPhones® or RunPhones® Wireless.
Still have questions? Contact our customer service
team M-F from 8-5pm EST at 877-838-4790 or
at [email protected].
Enjoy!

Warranty Information and Legal Disclosures

If you require warranty information or legal disclosures in additional languages, please scan the provided QR code or visit www.SleepPhones.com/instructions.

If you live in North America and need further assistance, please contact our customer service team:

Tel: 877-838-4790

Email: [email protected]

If you are located outside of North America, please visit our website www.SleepPhones.com or www.RunPhones.com to find your country’s distributor.

FCC Notice to Users

FCC ID: S9HZJRNFY06

Changes or modifications not expressly approved by AcousticSheep LLC could void the user’s (or your) authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

If interference occurs during use, the user is encouraged to try to correct it by one or more of the following measures:

• Reorient or relocate the wireless device.

• Increase the separation between the wireless device and other electronic devices.

• Connect the wireless device to an outlet on a different circuit
  from that to which the other electronic devices are connected.

• Consult the dealer or an experienced radio/TV technician for help.

Scan this QR code or visit www.SleepPhones.com/instructions to read this User Guide as well as Warranty Information and Legal disclosures in additional languages.

WEARING YOUR WIRELESS HEADPHONES

1. Holding the headphones, you’ll notice the flat speakers – one on each side – inside of the headband.
2. Place the headband on your head (tag goes at the back of your head).
3. Once the headband is on, adjust the speakers so they are positioned directly over your ears. This will ensure great sound quality.
   Please Note: The speakers move inside of the headband, independently of the headband.

BASIC WIRELESS HEADPHONE USAGE

• Power On: Press and hold center button for 5 seconds
• Volume: Click the arrows to increase or decrease the volume
• Skip Tracks: Double click arrows to skip tracks
• Play/Pause: Click the center button once to play or pause
• Power Off: Press and hold the middle square button on the Bluetooth® module for 3 seconds until you hear descending tones through the speakers

PAIRING YOUR WIRELESS HEADPHONES

1. Remove the Bluetooth® module from the hook and loop opening at the back of the headband.
2. Hold down the square button for 5 seconds until you hear ascending tones through the speakers followed by a series of double beeps and a fast blinking red light. Must be within 3 feet (1 meter) of your device.
3. On your device, make sure Bluetooth® is turned on. Look for ‘ACOUSTICSHEEP’ and select to pair. Pairing may take up to 30 seconds.

BLUETOOTH® CHARGING INSTRUCTIONS

1. Open the hook and loop at the back of the headband.

2. Remove the Bluetooth® module by unplugging it from the speakers.

3. Plug the micro-USB cable (USB symbol facing you) into the micro USB port on the Bluetooth® module (buttons facing you).

4. Plug the micro-USB cable into the USB port on your computer or any USB wall adapter – a solid red light will appear during charging.
   Please Note: Inserting the cable into the module upside down could damage your SleepPhones® or RunPhones® and they will not charge.

5. The module is fully charged when the red light disappears.

6. We recommend charging after every use (charging typically takes up to 3 hours).

WASHING INSTRUCTIONS

1. Open the hook and loop at the back of the headband to reveal the speaker components inside the headband.

2. Remove the Bluetooth® module and then reach in to remove the speakers, one at a time, from the headband.

3. Once the speakers are removed, you can machine- wash the headband.

4. Reinsert one speaker at a time, and move each about four inches from the hook and loop opening on either side of the headband.

   • Right speaker has red stitching
   • Left speaker has green stitching
   • Softer gray side should face towards the ear
   • White side should face away from the ear

5. Then insert the Bluetooth® module into the headband and close the hook and loop opening.

PROLONG THE LIFE OF YOUR HEADPHONES

• When disconnecting the cord, grasp and pull the plug and not the cord.
• Do not leave components in a wet or dirty headband.
• Wash your headband regularly (remove all components before washing).

TROUBLESHOOTING

• Not Sure if Fully Charged? While charging, if the red light is on, the module is not fully charged. If there is NO light on at all while charging, the Bluetooth® module is fully charged.
  Unable to Pair for the First Time? When you turn on the
  module, make sure to continue holding down the button for a full 5 seconds until you hear ascending tones followed by
  a series of beeps. The beeps indicate that the module is in pairing mode.

• Unable to Pair? If your Bluetooth® enabled device is unable to pair with the Bluetooth® module, you may need to reset the module and/or your device. To reset the Bluetooth® module, turn it on then hold both the “up” and “down” arrow buttons down for 7 seconds. Once the reset function is complete, there will be 2 long tones. The Bluetooth® module must be turned off and then turned back on for it to enter into pairing mode.
  Unable to Find Device while Pairing? If your AcousticSheep®
  module was previously paired with another device, it will automatically pair with that device if the device is within range. Make sure that the Bluetooth® on all other previously paired devices is turned off when you are pairing with a new device.

• No Sound When Paired

  • Slide the speakers inside the headband (gray side of speakers towards the ear) to position them over your ears.
  • Check the volume on your Bluetooth® audio player and wireless Bluetooth® module located inside the headband.
  • Make sure the wireless Bluetooth® module is charged.
    If your paired Bluetooth® device is separated from your SleepPhones® Effortless™ headphones for more than 5 minutes, the headphones will automatically power off. Try powering them back on (not all apps or software support Bluetooth®).

WARRANTY INFORMATION AND LEGAL DISCLOSURES

BATTERY
This AcousticSheep® product contains a rechargeable lithium ion battery. It should only be charged with the charging cable provided with this product. Lithium batteries last longer if they are charged after every use. They do not need (and prefer not) to be fully discharged before recharging. AcousticSheep® provides a battery replacement and recycling service that you can access through our website. Please DO NOT attempt to open this product or replace the battery yourself. Opening the product voids the limited warranty.

WARNINGS
WARNING: SleepPhones® or RunPhones® may be a strangulation hazard. They should not be used by children, the elderly, or by anyone who may strangulate on the cord.
WARNING: Use of a headset that covers both ears will impair your ability to hear other sounds. Use of such a headset while operating a motor vehicle or riding a bicycle may create a serious hazard to you and/or others, and is illegal in most states and regions.

WARNING: Exposure to high volume sound levels may damage your hearing. The louder the volume, the less time is required before your hearing could be affected. You may experience different sound levels when using your headset or headphones with different music and different devices. If you experience hearing discomfort, you should stop listening to the device through your headset or headphones and have your hearing checked by your doctor.
To protect your hearing, hearing experts suggest that you:

• Set the volume control in a low position before putting your headset or headphones on your ears and use them at the lowest possible volume.
• Avoid turning up the volume to block out noisy surroundings. Whenever possible, use your headset or headphones in a quiet environment with low background noise.
• Limit the amount of time you use headsets or headphones at high volume levels.
• Turn the volume down if the sound from the headset or headphones prevents you from hearing people speaking near you.
  If you live in North America and still can’t find the information you need, please call our customer service team for assistance before returning the products to your retailer under their return policy.
  Tel: 877-838-4790 Email: [email protected]
  If you live outside of North America, please visit our website www.SleepPhones.com or www.RunPhones.com to locate your country’s distributor.
  Bluetooth® Wireless Headphones AcousticSheep LLC

FCC

FCC NOTICE TO USERS
FCC ID: S9HZJRNFY06

Changes or modifications not expressly approved by AcousticSheep LLC could void the user’s (or your) authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

For the product FCC registration label, please see the Bluetooth® wireless module contained inside of the headband.

RF EXPOSURE
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.

DECLARATION OF CONFORMITY

AcousticSheep LLC declares that this product is in compliance with:

• The essential requirements and other relevant provisions of Directive 1999/5/EC
• All other relevant EU Directives.
  In compliance with WEEE Directive (2002/96/EC), please dispose of this product by taking it to your local collection point or recycling center for electronic devices.

These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

• Limit the amount of time you use headsets or headphones at high volume levels.
• Turn the volume down if the sound from the headset or headphones prevents you from hearing people speaking near you.

LIMITED ONE-YEAR WARRANTY
Please refer to www.SleepPhones.com/warranty for full details regarding the AcousticSheep LLC Limited Warranty.

CUSTOMER SERVICE
The answers to most setup and performance questions can be found in the FAQs at www.SleepPhones.com/faqs or www.RunPhones.com/faqs.
Visit www.SleepPhones.com/instructions to read this User Guide as well as Warranty Information and Legal disclosures in additional languages.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc., and any use of such marks by AcousticSheep LLC are under license. Other trademarks and trade names are those of their respective owners.
© 2018 AcousticSheep LLC. All rights reserved. SleepPhones®, RunPhones®, the SleepPhones® logo, the RunPhones® logo, and “pajamas for your ears” are trademarks or a registered trademark of AcousticSheep LLC. Unauthorized duplication is a violation of applicable law. US Patent No. 8,213,670 and 9,924,271. Other US and international patents pending.

References

• RunPhones
• Frequently Asked Questions
• SleepPhones | SleepPhones® Comfortable Headband Headphones for Sleeping
• Frequently Asked Questions | SleepPhones® Comfortable Headband Headphones for Sleeping
• Instruction Manuals | SleepPhones® Comfortable Headband Headphones for Sleeping
• Warranty | SleepPhones® Comfortable Headband Headphones for Sleeping
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>