aiwa NSX-D77 U Digital Mini System Instruction Manual
- June 17, 2024
- Aiwa
Table of Contents
aiwa NSX-D77 U Digital Mini System
Product Information
Specifications
- Tuning range: 87.5 MHz to 108 MHz
- Usable sensitivity (IHF): 13.2 dBf
- Antenna terminals: 75 ohms (unbalanced)
- Tuning range: 531 kHz to 1602 kHz (9 kHz step) / 530 kHz to 1710 kHz (10 kHz step)
- Usable sensitivity: 350 uV/m
- Mid-high frequency amplifier power output: 40 W + 40 W (200 Hz – 20 kHz, THD less than 1%, 8 ohms)
- Total harmonic distortion: 0.3% (26 W, 1 kHz, 8 ohms, DIN AUDIO)
- Low frequency amplifier power output: 120 W + 120 W (50 Hz – 200 Hz, THD less than 1%, 6 ohms)
- Total harmonic distortion: 0.3% (65 W,75 Hz,6 ohms, DIN AUDIO)
- Inputs: VIDEO/AUX: 300 mV (adjustable), MD: 300 mV (adjustable), MIC 1, MIC 2: 1 mV (10 kohms)
- Outputs: LINE OUT: 150 mV, SPEAKERS HIGH FREQ: accept speakers of 8 ohms or more,
- SPEAKERS LOW FREQ: accept speakers of 6 ohms or more,
- SURROUND SPEAKERS: accept speakers of 8 to 16 ohms, PHONES (stereo jack): accepts headphones of 32 ohms or more
- Track format: Laser, Semiconductor laser ( =780 nm)
- D-A converter: 1 bit dual
- Signal-to-noise ratio: 83 dB (1 kHz, 0 dB)
- Harmonic distortion: 0.05% (1 kHz, 0 dB)
- Wow and flutter: Unmeasurable
- Cabinet type: 4 way, built-in subwoofer (magnetic shielded type)
- Speakers: Subwoofer: 200 mm (7.87 in.) cone type, Woofer: 120 mm (4.72 in.) cone type, Tweeter: 60 mm (2.36 in.) cone type, Super Tweeter: 20 mm (0.79 in.) ceramic type
- Impedance: 6 ohms / 8 ohms
- Output sound pressure level: 87 dB/W/m
- Dimensions (W x H x D): 260 x 383 x 326 mm (10.24 x 15.08 x 12.83 in.)
- Weight: 7.5 kg (16 lbs 9 oz)
Product Usage Instructions
Tuning the Radio
- Connect the antenna to the antenna terminals.
- Press the “Tuning” button to switch to radio mode.
- Use the “Tuning” or “Seek” buttons to tune to the desired frequency.
Playing CDs
- Press the “CD” button to switch to CD mode.
- Insert a CD into the CD tray.
- Use the “Play” button to start playback.
- Use the “Skip” buttons to navigate between tracks.
Playing Cassettes
- Press the “Tape” button to switch to tape mode.
- Insert a cassette into the cassette deck.
- Use the “Play” button to start playback.
- Use the “Rewind” and “Fast Forward” buttons to navigate within
the cassette.
Connecting External Devices
- Use the appropriate input ports (VIDEO/AUX or MD) to connect external devices such as a TV or a MiniDisc player.
- Adjust the input level using the volume controls on the connected device or the receiver.
FAQs
- Q: What is the power requirement for this product?
- A: The power requirement for this product is AC 120 V, 60 Hz or AC 220-230 V, 60 Hz (switchable).
- Q: What is the weight of the main unit?
- A: The weight of the main unit is approximately 13.2 kg (29 lbs 2 oz) or 13.7 kg (30 lbs 3 oz), depending on the model.
NSX-D77 U NSX-T76 LH NSX-T77 HS
- This Service Manual is the “Revision Publishing” and replaces “Simple Manual” NSX-D77 (S/M Code No. 09-002-425-2T2) and NSX-T76
(S/M Code No. 09-004-425-2T3) and NSX-T77 (S/M Code No. 09-004-425-2T4). - If requiring information about the CD mechanisim, see Service Manual of 6ZG-1 (S/M Code No. 09-001-338-7N2).
S/M Code No. 09-005-425-2R2
REVISIODNATA
w
SPECIFICATIONS
87.5 MHz to 108 MHz 13.2 dBf 75 ohms (unbalanced)
531 kHz to 1602 kHz (9 kHz step) 530 kHz to 1710 kHz (10 kHz step) 350 uV/m Loop antenna
Mid-high frequency amplifier
Power output*
40 W + 40 W (200 Hz – 20 kHz,
THD less than 1%, 8 ohms)
Rated: 44 W + 44 W (8 ohms,
THD 1%, 1 kHz)
Reference: 55 W + 55 W (8 ohms,
THD 10%, 1 kHz)
Rated: 56 W + 56 W (8 ohms,
THD 1%,1 kHz)
Reference: 70 W + 70 W
(8 ohms, THD 10%,1 kHz)
Total harmonic distortion 0.3% (26 W, 1 kHz, 8 ohms, DIN
AUDIO)<U,HS>
0.3% (28 W, 1 kHz, 8 ohms, DIN
AUDIO)
Low frequency amplifier
Power output*
120 W + 120 W (50 Hz – 200 Hz,
THD less than 1%, 6 ohms)
Rated: 131 W + 131 W (6 ohms,
THD 1%, 75 Hz)
Reference: 165 W + 165 W
(6 ohms, THD 10%,75 Hz)
Rated: 167 W + 167 W (6 ohms,
THD 1%, 75 Hz)
Reference: 210 W + 210 W
(6 ohms, THD 10%, 75 Hz)
Total harmonic distortion 0.3 % (65 W,75 Hz,6 ohms,
DIN AUDIO)<U,HS>
0.3 % (84 W,75 Hz,6 ohms,
DIN AUDIO)
- without connecting to surround speakers
Inputs
VIDEO/AUX: 300 mV (adjustable)
MD: 300 mV (adjustable)
MIC 1,MIC 2: 1 mV (10 kohms)
Outputs
LINE OUT: 150 mV
SPEAKERS HIGH FREQ:
accept speakers of 8 ohms or more
SPEAKERS LOW FREQ:
accept speakers of 6 ohms or more
SURROUND SPEAKERS: accept
speakers of 8 to 16 ohms
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo CrO2 tape: 50 Hz 16000 Hz Normal tape: 50 Hz 15000 Hz 60dB (Dolby B NR ON, CrO2 tape peak level) AC bias Deck 1: Playback head x 1 Deck 2: Recording/Playback head x 1, erase head x 1
Laser
Semiconductor laser ( =780 nm)
D-A converter
1 bit dual
Signal-to-noise ratio
83 dB (1 kHz, 0 dB)
Harmonic distortion
0.05 % (1 kHz, 0 dB)
Wow and flutter
Unmeasurable
<Speaker system SXWND77>
Cabinet type
4 way, built-in subwoofer
(magnetic shielded type)
Speakers
Subwoofer:
200 mm ( 77/8 in.) cone type Woofer:
120 mm ( 43/4 in.) cone type Tweeter:
60 mm ( 23/8 in.) cone type Super Tweeter:
Impedance
20 mm (13/16 in.) ceramic type 6 ohms / 8 ohms
Output sound pressure level 87 dB/W/m
Dimensions (W x H x D)
260 x 383 x 326 mm
Weight
(97/8 x 151/8 x 121/4 in..) 7.5 kg (16 lbs 9 oz)
<Speaker system SXWNT98>
Cabinet type
4 way, built-in subwoofer
Speakers
Subwoofer:
200 mm ( 77/8 in.) cone type Mid range:
100 mm ( 315/16 in.) cone type Tweeter:
60 mm ( 23/8 in.) cone type Super Tweeter:
Impedance
20 mm (13/16 in.) ceramic type 6 ohms / 8 ohms
Output sound pressure level 87 dB/W/m
Dimensions (W x H x D)
260 x 463 x 314 mm
Weight
(101/4 x 181/4 x 123/8 in..) 8.0 kg (17 lbs. 10 oz)
<Speaker system SXWNT77>
Cabinet type
4 way, built-in subwoofer
(magnetic shielded type)
Speakers
Subwoofer:
200 mm ( 77/8 in.) cone type Mid range:
100 mm ( 4 in.) cone type
Tweeter:
60 mm ( 23/8 in.) cone type Super Tweeter:
Impedance
20 mm (13/16 in.) ceramic type 6 ohms / 8 ohms
Output sound pressure level 87 dB/W/m
Dimensions (W x H x D)
260 x 463 x 314 mm
Weight
(101/4 x 18 x 123/8 in..) 7.0 kg (15 lbs 7 oz)
120 V AC, 60 Hz, 220 V AC, 60 Hz
Standby power consumption If the power-economizing mode is OFF: 35 W, 36 W<HS,LH> If the power-economizing mode is ON: 0.9 W
- Design and specifications are subject to change without notice.
· Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
· The word “BBE”and the “BBE symbol” are trademarks of BBE Sound, Inc. Under license from BBE Sound,Inc.
– 2 –
w
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
This set employs laser. Therefore, be sure to follow carefully the
instructions below when servicing.
WARNING!! WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO
CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION. BE SURE TO
OBSERVE FROM A DISTANCE OF MORE THAN 30cm FROM THE SURFACE OF THE OBJECTIVE
LENS ON THE
OPTICAL PICK-UP BLOCK
s Caution: Invisible laser radiation when open and interlocks defeated avoid
exposure to beam.
s Advarsel: Usynlig laserståling ved åbning, når sikkerhedsafbrydere er ude af
funktion. Undgå udsættelse for stråling.
CAUTION Use of controls or adjustments or performance of procedures other than
those specified herin may result in hazardous radiation exposure.
ATTENTION L’utillisation de commandes, réglages ou procédures autres que ceux
spécifiés peut entraîner une dangereuse exposition aux radiations.
ADVARSEL Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude af
funktion. Undgå udsættelse for stråling.
This Compact Disc player is classified as a CLASS 1 LASER product. The CLASS 1
LASER PRODUCT label is located on the rear exterior.
VAROITUS! Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla
tavalla saataa altistaa käyt-täjän turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
VARNING! Om apparaten används på annat sätt än vad som specificeras i denna
bruksanvising, kan användaren utsättas för osynling laserstrålning, som
överskrider gränsen för laserklass 1.
CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1
LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT
Precaution to replace Optical block
(KSS-213F)
Body or clothes electrostatic potential could ruin laser diode in the optical
block. Be sure ground body and workbench, and use care the clothes do not
touch the diode.
- After the connection, remove solder shown in right figure.
PICK-UP Assy P.C.B Solder
– 3 –
w
NOTE ON BEFORE STARTING REPAIR 1. Forced discharge of electrolytic capacitor
of power supply block
When repair is going to be attempted in the set that uses relay circuit in the
power supply block, electric potential is kept charged across the electrolytic
capacitors (C101, 102) even though AC power cord is removed. If repair is
attempted in this condition, secondary defect can occur. In order to prevent
the secondary trouble, perform the following measures before starting repair
work.
Discharge procedure
1 Remove the AC power cord. 2 Connect a discharging resistor at an end of lead
wire that
has clips at both ends. Connect the other end of the lead wire to metal
chassis. 3 Contact the other end of the discharging resistor to the positive
(+) side (+VH) of C101. (For two seconds) 4 Contact the same end of the
discharging resistor as step 3 to the negative (-) side (-VH) of C102 in the
same way. (For two seconds) 5 Check that voltage across C101 and C102 has
decreased to 1 V or less using a multimeter or an oscilloscope.
MAIN C.B
D101
3 C101
C102 4
2
2
Select a discharging resistor referring to the following table.
Charging voltage (V) (C101, 102)
Discharging resistor ()
Rated power (W)
25-48
100
3
49-140
220
5
Parts number
87-A00-247-090 87-A00-232-090
Fig-1
Note: The reference numbers (C101, C102) of the electrolytic capacitors can change depending on the models. Be sure to check the reference numbers of the charging capacitors on schematic diagram before starting the discharging work.
- Check items before exchanging the MICROCOMPUTER
Be sure to check the following items before exchanging the MICROCOMPUTER. Exchange the MICROCOMPUTER after confirming that the MICROCOMPUTER is surely defective.
2-1. Regarding the HOLD terminal of the MICROCOMPUTER When the HOLD terminal (INPUT) of the MICROCOMPUTER is “H”, the MICROCOMPUTER is judged to be operating correctly. When this terminal is “L”, the main power cannot be turned on. Therefore, be sure to check the terminal voltage of the HOLD terminal before exchange. When the MICROCOMPUTER is not defective, the HOLD terminal can also go “L” when the POWER AMPLIFIER has any abnormalities that triggers the abnormality detection circuit on the MAIN C. B. that sets the HOLD terminal to “L”.
· Good or no good judgement of the MICROCOMPUTER 1 Turn on the AC main power. 2 Confirm that the main power is turned on and the HOLD terminal of the MICROCOMPUTER keeps the “H” level or not. 3 When the HOLD terminal is “L” level, the abnormality detection circuit is judged to be working correctly and the MICROCOMPUTER is judged to be good.
– 4 –
w
In such a case, check also if the POWER AMPLIFIER circuit or power supply
circuit has any abnormalities or not.
2-2. Regarding reset There are cases that the machine does not work correctly
because the MICROCOMPUTER is not reset even though the AC power cord is re-
inserted, or the software reset (pressing the STOP key + POWER key) is
performed. When the above described phenomenon occurs, it can lead to wrong
judgement as if the MICROCOMPUTER is defective and to exchange the
MICROCOMPUTER. In such a case, perform the forced-reset by the following
procedure and check good or no good of the MICROCOMPUTER. 1 Remove the AC
power cord.
MICROCOMPUTER
18 15
FRONT C.B
FRONT C.B
C113
% VSS
C113
MICRO-
COMPUTER
*VDD
Short with tweezers.
Fig-2-2
2 Short both ends of the electrolytic capacitor C113 that is connected to VDD
of the MICROCOMPUTER with tweezers. 3 Connect the AC power cord again. If the
MICROCOMPUTER returns to the normal operation, the MICROCOMPUTER is
good.
Note: The reference number or MICROCOMPUTER pin number of transistor (Q110)
and electrolytic capacitor (C113) can change depending on the models. Be sure
to check the reference numbers on schematic diagram before starting the
discharging work.
2-3. Confirmation of soldering state of MICROCOMPUTER Check the soldering
state of the MICROCOMPUTER in addition to the above described procedures. Be
sure to exchange the MICROCOMPUTER after surely confirming that the trouble is
not caused by poor soldering but the MICROCOMPUTER itself.
– 5 –
w
ELETRICAL MAIN PARTS LIST
REF. NO. PART NO. IC
KANRI NO.
DESCRIPTION
8A-NF3-635-010 87-A21-482-010 87-A20-869-040 87-A21-398-010 87-A21-397-010
C-IC,LC876596W-5P43 IC,RPM6938-H4 C-IC,M62449FP IC,STK490-110<HS,LH> IC,STK490-070
87-A20-355-010 87-A20-783-040 87-A21-577-040 87-070-289-040 87-A21-021-040
IC,CXA1553P C-IC,BA7762AFS C-IC,M61506FP IC,BU 2092F C-IC,BU2099FV
87-A21-018-040 87-A21-452-030 87-A21-051-040 87-A21-560-010 87-070-127-110
C-IC,M65849BFP631D C-IC,BD3876KS2 C-IC,BU9990-03FS<HS,LH> IC,LA1844L-A IC,LC72131D
87-020-454-010 IC,DN6851
TRANSISTOR
87-A30-217-010 87-026-245-080 87-A30-198-080 89-213-702-010 87-026-610-080
87-A30-105-080 87-A30-489-040 87-A30-468-080 87-A30-484-080 87-A30-076-080
87-A30-075-080 87-A30-318-080 87-A30-218-080 87-A30-087-080 87-A30-269-040
87-A30-073-080 87-A30-074-080 87-A30-190-080 87-A30-097-010 87-A30-098-010
87-A30-106-040 87-A30-276-040 87-A30-063-080 87-026-609-080 87-A30-107-070
87-A30-186-010 87-A30-086-070 87-A30-329-080 89-327-143-080 87-A30-072-080
87-A30-234-080 87-026-463-080
TR,2SB1436(R) TR,DTC114ES TR,KTC3199GR TR,2SB1370 (1.8W) TR,KTC3198GR
C-TR,RT1P441C
C-TR,2SA1235F TR,CSA952K TR,2SB1237(Q) C-FET,2SK2158 C-FET,2SJ461-T1
C-TR,RT1N 141C C-TR,RT1P 141C TR,CC5551 TR,FN 1016 TR,FP 1016
C-TR,CMBT5551 C-TR,DTA143EKA C-TR,KRA104S TR,KTA1266GR C-TR,CMBT5401
FET,2SK3053 C-TR,CSD1306E TR,CD1585BC TR,2SC2714 (0.1W) C-TR,RT1P 144C
TR,CSC4115BC TR,2SA933SRS
DIODE
87-A40-673-090 87-A40-553-080 87-A40-784-080 87-020-465-080 87-A40-764-080
87-A40-781-080 87-A40-438-080 87-017-447-010 87-017-654-060 87-070-274-080
87-A40-313-080 87-A40-270-080 87-A40-269-080 87-A40-768-080
DIODE,D10XB20 DIODE,1N4003 LES ZENER,UZ39BSB DIODE,1SS133 ZENER,UZ10BSC
ZENER,UZ36BSA
C-DIODE,MC 2840 C-DIODE,MC2838 C-DIODE,MC2836 ZENER,UZ16BSA
REF. NO.
PART NO.
KANRI
DESCRIPTION
NO.
87-017-154-080 ZENER,HZS6C3L
87-020-331-080 CHIP-DIODE,DAN202K
87-A40-488-080 DIODE,1SS244
87-A40-747-080 ZENER,UZ5.1BSB
87-A40-751-080 ZENER,UZ6.2BSB
87-A40-646-010 87-A40-745-080 87-A40-749-080 87-017-149-080
DIODE,FMB-G16L ZENER,UZ4.7BSA ZENER,UZ5.6BSB ZENER,HZS6A2L
MAIN C.B
C3
87-012-368-080
C4
87-012-368-080
C21
87-016-035-090
C22
87-016-035-090
C25
87-010-990-080
C26
87-016-300-080
C27
87-010-990-080
C28
87-016-300-080
C31
87-010-263-080
C32
87-010-197-080
C34
87-010-247-080
C35
87-010-406-080
C36
87-010-381-080
C38
87-010-393-080
C39
87-010-393-080
C40
87-010-190-080
C60
87-010-403-080
C80
87-010-401-080
C81
87-010-374-080
C82
87-010-260-080
C104 C105 C111 C112 C115
87-010-196-080 87-010-196-080 87-010-401-080 87-010-401-080 87-010-401-080
C116 C117 C118 C121 C122
87-010-401-080 87-012-142-080 87-012-142-080 87-010-406-080 87-010-406-080
C151 C152 C163 C171 C172
87-010-405-080 87-010-260-080 87-010-196-080 87-012-368-080 87-012-368-080
C173 C174 C175 C176 C177
87-012-368-080 87-012-368-080 87-A11-572-080 87-A11-572-080 87-010-197-080
C178 C301 C302 C303 C304
87-010-197-080 87-010-318-080 87-010-318-080 87-012-157-080 87-012-157-080
C305 C306 C307 C311 C312
87-012-157-080 87-012-157-080 87-010-196-080 87-010-198-080 87-010-198-080
C313 C314 C315 C316 C317
87-010-180-080 87-010-180-080 87-010-178-080 87-010-178-080 87-A10-201-080
C318 C319 C320
87-A10-201-080 87-012-141-080 87-012-141-080
C-CAP,S 0.1-50 F C-CAP,S 0.1-50 F CAP,E 6800-35 VR CAP,E 6800-35 VR CAP,E
33-100 M SME
CAP,E 22-100 M SME CAP,E 33-100 M SME CAP,E 22-100 M SME CAP, ELECT 100-10V
CAP, CHIP 0.01 DM
CAP, ELECT 100-50V CAP,E 22-50 M 11L SME CAP, ELECT 330-16V CAP,E 100-35 M SME
CAP,E 100-35 M SME
C-CAP,S 0.01-50 Z F C2012 CAP, ELECT 3.3-50V CAP, ELECT 1-50V CAP, ELECT
47-10V CAP, ELECT 47-25V
CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25 CAP, ELECT 1-50V CAP, ELECT 1-50V
CAP, ELECT 1-50V
CAP, ELECT 1-50V C-CAP,S 0.33-16 Z F GRM
CAP,E 10-50 M 11L SME CAP,E 47-25 M 11L SME
C-CAP,S 0.1-50 F C-CAP,S 0.1-50 F C-CAP,S 0.015-50 K B C-CAP,S 0.015-50 K B
CAP, CHIP 0.01 DM
CAP, CHIP 0.01 DM C-CAP,S 47P-50 CH C-CAP,S 47P-50 CH C-CAP,S 330P-50 CH
C-CAP,S 330P-50 CH
C-CAP,S 330P-50 CH C-CAP,S 330P-50 CH CHIP CAPACITOR,0.1-25 CAP, CHIP 0.022
CAP, CHIP 0.022
C-CER 1500P C-CER 1500P CHIP CAP 1000P CHIP CAP 1000P C-CAP,S0.33-16 KB
C-CAP,S0.33-16 KB CHIP-CAPACITOR,0.22-16F CHIP-CAPACITOR,0.22-16F
– 6 –
w
REF. NO.
C321 C322 C324 C325 C327
PART NO.
KANRI
DESCRIPTION
NO.
87-012-141-080 CHIP-CAPACITOR,0.22-16F
87-012-141-080 CHIP-CAPACITOR,0.22-16F
87-010-260-080 CAP, ELECT 47-25V
87-010-370-080 CAP,E 330-6.3 SME
87-010-404-080 CAP, ELECT 4.7-50V
C328 C332 C335 C336 C337
87-010-404-080 87-010-196-080 87-010-401-080 87-010-401-080 87-010-196-080
CAP, ELECT 4.7-50V CHIP CAPACITOR,0.1-25 CAP, ELECT 1-50V CAP, ELECT 1-50V CHIP CAPACITOR,0.1-25
C339 C340 C351 C352 C354
87-010-196-080 87-010-196-080 87-012-140-080 87-012-140-080 87-010-175-080
CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25 CAP 470P CAP 470P CAP 560P
C355 C356 C357 C358 C359
87-012-349-080 87-010-260-080 87-010-197-080 87-010-183-080 87-010-183-080
C-CAP,S 1000P-50 CH CAP, ELECT 47-25V CAP, CHIP 0.01 DM C-CAP,S 2700P-50 B C-CAP,S 2700P-50 B
C360 C370 C371 C372 C373
87-010-183-080 87-010-196-080 87-010-175-080 87-010-175-080 87-010-179-080
C-CAP,S 2700P-50 B CHIP CAPACITOR,0.1-25 C-CAP,S 560P-50 SL C-CAP,S 560P-50 SL CAP,CHIP S B1200P
C374 C375 C376 C378 C381
87-010-179-080 87-010-545-080 87-010-545-080 87-010-196-080 87-010-197-080
CAP,CHIP S B1200P CAP, ELECT 0.22-50V CAP, ELECT 0.22-50V CHIP CAPACITOR,0.1-25 CAP, CHIP 0.01 DM
C382 C383 C384 C385 C386
87-010-318-080 87-010-197-080 87-010-402-080 87-010-184-080 87-010-196-080
C-CAP,S 47P-50 CH CAP, CHIP 0.01 DM CAP, ELECT 2.2-50V CHIP CAPACITOR 3300P(K) CHIP CAPACITOR,0.1-25
C388 C501 C502 C503 C504
87-012-156-080 87-010-263-080 87-010-196-080 87-016-460-080 87-016-460-080
C-CAP,S 220P-50 CH CAP, ELECT 100-10V CHIP CAPACITOR,0.1-25 C-CAP,S 0.22-16 K B C-CAP,S 0.22-16 K B
C505 C506 C507 C508 C509
87-012-141-080 87-010-184-080 87-A11-550-080 87-016-669-080 87-016-669-080
CHIP-CAPACITOR,0.22-16F CHIP CAPACITOR 3300P(K) C-CAP,S 820P-50 K B C-CAP,S 0.1-25 K B C-CAP,S 0.1-25 K B
C510 C511 C512 C513 C514
87-010-184-080 87-A11-550-080 87-016-460-080 87-010-544-080 87-010-374-080
CHIP CAPACITOR 3300P(K) C-CAP,S 820P-50 K B C-CAP,S 0.22-16 K B CAP, ELECT 0.1-50V CAP, ELECT 47-10V
C515 C516 C517 C518 C531
87-010-401-080 87-010-401-080 87-010-183-080 87-010-183-080 87-010-560-080
CAP, ELECT 1-50V CAP, ELECT 1-50V C-CAP,S 2700P-50 B C-CAP,S 2700P-50 B CAP,E 10-50 GAS
C532 C533 C534 C535 C536
87-010-196-080 87-010-196-080 87-012-156-080 87-010-178-080 87-010-196-080
CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25 C-CAP,S 220P-50 CH CHIP CAP 1000P CHIP CAPACITOR,0.1-25
C538 C541 C603 C604 C605
87-010-318-080 87-010-178-080 87-010-318-080 87-010-318-080 87-010-318-080
C-CAP,S 47P-50 CH CHIP CAP 1000P C-CAP,S 47P-50 CH C-CAP,S 47P-50 CH C-CAP,S 47P-50 CH
C606 C611 C612 C613 C614
87-010-318-080 87-010-956-080 87-010-369-080 87-010-197-080 87-016-669-080
C-CAP,S 47P-50 CH CHIP-CAP,S 0.068-25B C-CAP,S 0.033-25 K B CAP, CHIP 0.01 DM C-CAP,S 0.1-25 K B
REF. NO.
C616 C617 C618 C619 C620
PART NO.
KANRI
DESCRIPTION
NO.
87-010-180-080 87-010-198-080 87-010-401-080 87-010-263-080
C-CER 1500P CAP, CHIP 0.022 CAP, ELECT 1-50V CAP, ELECT 100-10V
87-016-669-080 C-CAP,S 0.1-25 K B
C621 C623 C624 C626 C627
87-010-197-080 87-010-401-080 87-010-401-080 87-010-992-080 87-010-400-080
CAP, CHIP 0.01 DM CAP, ELECT 1-50V CAP, ELECT 1-50V C-CAP,S 0.047-16 K B CAP, ELECT 0.47-50V
C628 C629 C630 C631 C632
87-010-400-080 87-010-992-080 87-010-383-080 87-010-185-080 87-010-185-080
CAP, ELECT 0.47-50V C-CAP,S 0.047-16 K B CAP, ELECT 100-10V C-CAP,S 3900P-50 B C-CAP,S 3900P-50 B
C634 C635 C636 C637 C638
87-010-196-080 87-A10-307-080 87-A10-307-080 87-A10-307-080 87-A10-307-080
CHIP CAPACITOR,0.1-25 C-CAP,S 0.1-25 K B C-CAP,S 0.1-25 K B C-CAP,S 0.1-25 K B C-CAP,S 0.1-25 K B
C639 C641 C642 C643 C644
87-010-405-080 87-010-401-080 87-010-401-080 87-010-196-080 87-010-401-080
CAP, ELECT 10-50V CAP, ELECT 1-50V CAP, ELECT 1-50V CHIP CAPACITOR,0.1-25 CAP, ELECT 1-50V
C671 C672 C673 C675 C679
87-010-322-080 87-010-322-080 87-010-197-080 87-010-196-080 87-010-196-080
C-CAP,S 100P-50 CH C-CAP,S 100P-50 CH CAP, CHIP 0.01 DM CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25
C680 C682 C771 C772 C773
87-010-197-080 87-010-196-080 87-010-263-080 87-010-197-080 87-010-184-080
CAP, CHIP 0.01 DM CHIP CAPACITOR,0.1-25 CAP, ELECT 100-10V CAP, CHIP 0.01 DM CHIP CAPACITOR 3300P(K)
C774 C779 C780 C782 C783
87-010-184-080 87-A10-679-080 87-A10-679-080 87-010-197-080 87-010-197-080
CHIP CAPACITOR 3300P(K) C-CAP,S 3300P-50 TR
C784 C785 C786 C788 C789
87-010-197-080 87-010-197-080 87-010-197-080 87-010-149-080 87-A10-592-080
CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM C-CAP,S 5P-50 CH C-CAP,S
0.015-50 J
C789 C790 C790 C791 C792
87-012-365-080 87-A10-592-080 87-012-365-080 87-010-196-080 87-010-197-080
C-CAP,S 0.027-25 K B<U,LH> C-CAP,S 0.015-50 J
C793 C795 C796 C797 C798
87-010-404-080 87-010-197-080 87-010-197-080 87-010-405-080 87-010-197-080
CAP, ELECT 4.7-50V CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CAP, ELECT 10-50V CAP, CHIP 0.01 DM
C799 C800 C801 C802 C803
87-010-407-080 87-012-369-080 87-010-403-080 87-012-369-080 87-010-198-080
CAP, ELECT 33-50V C-CAP,S 0.047-50F CAP, ELECT 3.3-50V C-CAP,S 0.047-50F CAP, CHIP 0.022
C804 C807 C808 C809 C810
87-010-263-080 87-010-400-080 87-010-401-080 87-010-401-080 87-010-196-080
CAP, ELECT 100-10V CAP, ELECT 0.47-50V CAP, ELECT 1-50V CAP, ELECT 1-50V CHIP CAPACITOR,0.1-25
C811 C812 C814 C815 C816
87-010-403-080 87-010-403-080 87-010-197-080 87-010-400-080 87-010-403-080
CAP, ELECT 3.3-50V CAP, ELECT 3.3-50V CAP, CHIP 0.01 DM CAP, ELECT 0.47-50V CAP, ELECT 3.3-50V
– 7 –
w
REF. NO.
C819 C820 C821 C823 C824
PART NO.
KANRI
DESCRIPTION
NO.
87-010-179-080 CAP,CHIP S B1200P
87-010-179-080 CAP,CHIP S B1200P
87-010-405-080 CAP, ELECT 10-50V
87-010-177-080 C-CAP,S 820P-50 SL
87-010-404-080 CAP,E 4.7-50 M 11L SME
C824 C825 C842 C844 C850
87-010-405-080 87-010-596-080 87-010-197-080 87-010-197-080 87-010-260-080
CAP, ELECT 10-50V<U,LH> CAP, S 0.047-16 CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CAP, ELECT 47-25V
C851 C852 C853 C858 C859
87-010-197-080 87-010-197-080 87-010-197-080 87-010-196-080 87-010-196-080
CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25
C860 C959 C960 C961 C963
87-010-197-080 87-010-196-080 87-010-196-080 87-010-152-080 87-015-785-080
CAP, CHIP 0.01 DM CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25 C-CAP,S 8P-50 CH CHIP CAPACITOR, 0.1FZ-25Z
C971 C972 C973 C974 C979
87-010-381-080 87-010-404-080 87-010-197-080 87-010-197-080 87-010-322-080
CAP, ELECT 330-16V CAP, ELECT 4.7-50V CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM C-CAP,S 100P-50 CH
C981 C982 C983 C984 C987
87-010-260-080 87-010-196-080 87-010-197-080 87-010-197-080 87-010-197-080
CAP, ELECT 47-25V CHIP CAPACITOR,0.1-25 CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM
C991 C992 C993 C995 C997
87-010-312-080 87-010-312-080 87-010-178-080 87-010-178-080 87-010-196-080
C-CAP,S 15P-50 CH C-CAP,S 15P-50 CH CHIP CAP 1000P CHIP CAP 1000P CHIP CAPACITOR,0.1-25
C998 C999 CF831 CF832 CN1
87-010-260-080 87-A11-155-080 87-008-261-010 87-008-261-010 87-A60-996-010
CAP, ELECT 47-25V CAP,TC U 0.01-16 Z F FILTER, SFE10.7MA5-A FILTER, SFE10.7MA5-A CONN,13P V BLK TAC-L13X-A3
CN91 CN92 CN101 CN301 CN351
87-A60-619-010 87-A60-619-010 87-A60-996-010 87-A60-620-010 87-A60-625-010
CONN,2P V 2MM JMT CONN,2P V 2MM JMT CONN,13P V BLK TAC-L13X-A3 CONN,3P V 2MM JMT CONN,8P V 2MM JMT
CN601 CN602 CN605 CNA1 CNA2
87-099-719-010 87-A60-131-010 87-099-568-010 8A-NF8-653-010 8A-NF3-640-110
CONN,30P TYK-B(X) CONN,6P V FE CONN,11P TUC-P11P-B1 CONN ASSY,9P TID-A(480) CONN ASSY,3P (VM) ANF-3<HS,LH>
CNA3 FB501 FC602 FFE831 J102
87-049-919-010 87-008-372-080 88-906-481-110 A8-8ZA-190-030 87-A60-238-010
CONN,3P V WHT EH FILTER, EMI BL OIRNI FF-CABLE,6P 1.25 480MM 8ZA-1 FEUNM TERMINAL,SP 4P (MSC)
J103 J601 J831 L101 L102
87-A60-483-010 87-A60-885-010 87-A60-202-010 87-A50-610-010 87-A50-610-010
JACK,DIA6.3 BLK ST W/S KM JACK,PIN 6P R/W MSC TERMINAL,ANT 4P MSP-154V-02 COIL,1UHK COIL,1UHK
L301 L302 L351 L801 L802
87-A50-049-010 87-A50-049-010 87-007-342-010 87-A50-608-010 87-A91-551-010
COIL,TRAP 85K(COI) COIL,TRAP 85K(COI) COIL,OSC 85K BIAS COIL,FM DET-N(TOK) FLTR,PCFJZH-450L (TOK)
L811 L821 L822 L832 L951
87-005-847-080 87-A50-209-010 87-A50-209-010 87-005-847-080 8A-NF8-667-010
COIL,2.2UH(CECS) COIL,1POLE MPX(MIT) COIL,1POLE MPX(MIT) COIL,2.2UH(CECS) COIL,AM PACK 4(TOK)
REF. NO.
R25 R117 R118 R161 R162
PART NO.
KANRI
DESCRIPTION
NO.
87-A00-261-080 87-012-368-080 87-012-368-080 87-A00-441-050
RES,M/F 0.56-1W J C-CAP,S 0.1-50 Z F
87-A00-441-050 RES,270-1/2W J RP
R163 R164 R790 R991 R993
87-A00-441-050 87-A00-441-050 87-010-197-080 87-010-322-080 87-010-322-080
RES,270-1/2W J RP RES,270-1/2W J RP CAP, CHIP 0.01 DM C-CAP,S 100P-50 CH C-CAP,S 100P-50 CH
R995 SFR301 SFR302 SFR303 SFR304
87-010-322-080 87-024-355-080 87-024-355-080 87-024-355-080 87-024-355-080
C-CAP,S 100P-50 CH SFR,33K DIA6 H SFR,33K DIA6 H SFR,33K DIA6 H SFR,33K DIA6 H
SFR305 SFR306 SFR351 SFR352 X991
87-024-356-080 87-024-356-080 87-024-356-080 87-024-356-080 87-A70-061-010
SFR,47K DIA6 H SFR,47K DIA6 H SFR,47K DIA6 H SFR,47K DIA6 H VIB,XTAL 4.500MHZ CSA-309
DISPLAY C.B
C103 C104 C105 C106 C107
87-010-196-080 87-010-313-080 87-010-322-080 87-012-145-080 87-012-157-080
C108 C109 C110 C112 C113
87-015-681-040 87-010-401-040 87-010-196-080 87-016-460-080 87-A10-189-040
C114 C115 C116 C117 C118
87-010-196-080 87-010-198-080 87-010-493-040 87-010-498-040 87-010-194-080
C119 C120 C121 C122 C123
87-A10-797-040 87-015-699-040 87-015-699-040 87-010-197-080 87-010-196-080
C125 C128 C129 C131 C132
87-010-196-080 87-010-178-080 87-010-194-080 87-A10-189-040 87-A10-189-040
C151 C192 C196 C197 C213
87-010-194-080 87-015-785-080 87-010-194-080 87-010-194-080 87-A10-189-040
C301 C303 C304 C305 C306
87-010-318-080 87-016-460-080 87-016-460-080 87-010-196-080 87-010-196-080
C310 C701 C801 C802 C803
87-010-067-040 87-010-981-040 87-012-156-080 87-010-176-080 87-010-187-080
C804 C805 C806 C807 C809
87-010-213-080 87-010-197-080 87-010-071-040 87-010-197-080 87-012-155-080
C810 C811
87-010-264-040 87-010-244-040
CHIP CAPACITOR,0.1-25 CAP, CHIP 18P C-CAP,S 100P-50 CH CAP, CHIP S 270P CH
C-CAP,S 330P-50 CH
E/CAP 10-16 CAP,E 1-50 SME CHIP CAPACITOR,0.1-25 C-CAP,S 0.22-16 K B CAP,E
220-10
CHIP CAPACITOR,0.1-25 CAP, CHIP 0.022 CAP,E 0.47-50 GAS CAP,E 10-16 GAS CAP,
CHIP 0.047
CAP,E 47-35 M 5L SRM CAP,E 10-50 7L CAP,E 10-50 7L CAP, CHIP 0.01 DM CHIP
CAPACITOR,0.1-25
CHIP CAPACITOR,0.1-25 CHIP CAP 1000P CAP, CHIP 0.047 CAP,E 220-10 CAP,E 220-10
CAP, CHIP 0.047 C-CAP, 0.1-25 Z F C3216 CAP, CHIP 0.047 CAP, CHIP 0.047 CAP,E
220-10
C-CAP,S 47P-50 CH C-CAP,S 0.22-16 K B C-CAP,S 0.22-16 K B CHIP
CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25
CAP,E 0.1-50 5L CAP,E 22-35 5L SRE C-CAP,S 220P-50 CH<HS,LH> C-CAP,S 680P-50
SL<HS,LH> CAP CHIP S5600P<HS,LH>
C-CAP,S 0.015-50 B<HS,LH> CAP, CHIP 0.01 DM<HS,LH> CAP,E 1-50 M 5L SRE<HS,LH>
CAP, CHIP 0.01 DM<HS,LH> C-CAP 180P-50CH<HS,LH>
CAP,E 100-10 5L<HS,LH> CAP,E 22-16 5L<HS,LH>
– 8 –
w
REF. NO.
C812 C821 C833 C901 C902
PART NO.
KANRI
DESCRIPTION
NO.
87-016-044-040 CAP,E 100-16 GAS<HS,LH>
87-010-196-080 CHIP CAPACITOR,0.1-25<HS,LH>
87-010-322-080 C-CAP,S 100P-50 CH<HS,LH>
87-012-157-080 C-CAP,S 330P-50 CH
87-010-176-080 C-CAP,S 680P-50 SL
C903 C904 C905 C906 C907
87-010-176-080 87-010-176-080 87-010-176-080 87-010-176-080 87-010-176-080
C-CAP,S 680P-50 SL C-CAP,S 680P-50 SL C-CAP,S 680P-50 SL C-CAP,S 680P-50 SL C-CAP,S 680P-50 SL
C908 C909 C910 C911 C912
87-010-176-080 87-010-176-080 87-010-176-080 87-010-176-080 87-010-176-080
C-CAP,S 680P-50 SL C-CAP,S 680P-50 SL C-CAP,S 680P-50 SL C-CAP,S 680P-50 SL C-CAP,S 680P-50 SL
C913 C914 CN101 CN102 CN103
87-010-176-080 87-012-145-080 87-099-720-010 87-A60-054-010 87-099-750-010
C-CAP,S 680P-50 SL CAP, CHIP S 270P CH CONN,30P TYK-B(P) CONN,14P V 9604S-14C CONN,15P V 9604SC
CN601 CN701 FC102 FC601 FC701
87-A60-062-010 87-099-750-010 88-914-481-110 88-905-081-110 88-915-161-110
CONN,05P V 9604S-05C CONN,15P V 9604SC FF-CABLE,14P 1.25 480MM FF-CABLE,5P 1.25 FF-CABLE,15P 1.25
FL101 JR102 L101 L801 L802
8A-NF3-613-010 83-XM1-617-080 87-A50-333-010 87-A50-093-010 87-003-098-080
FL,BJ752GK-ANF3 C-COIL,BK2125HM601
CONTROL C.B
C401 C407 C410 C417 C423
87-010-196-080 87-010-322-080 87-010-196-080 87-010-322-080 87-010-196-080
C424 C501 C502 C531 C532
87-010-196-080 87-010-178-080 87-012-156-080 87-010-196-080 87-010-196-080
CN104 CN302 FC104 FC302 LED101
87-099-750-010 87-A60-059-010 88-915-161-110 88-908-381-110 87-A40-317-080
LED421 LED422 LED440 LED441 LED442
87-A40-831-010 87-A40-831-010 87-A40-380-180 87-A40-380-180 87-A40-380-180
LED443 LED444 LED445 LED446 LED447
87-A40-380-180 87-A40-380-180 87-A40-380-180 87-A40-380-180 87-A40-380-180
LED448 LED449 LED451 LED451 LED452
87-A40-380-180 87-A40-380-180 87-A40-537-040 87-A40-809-040 87-A40-537-040
LED452 LED453 LED453 LED454 LED454
87-A40-809-040 87-A40-537-040 87-A40-809-040 87-A40-537-040 87-A40-809-040
LED455 87-A40-537-040 LED455 87-A40-809-040
CHIP CAPACITOR,0.1-25 C-CAP,S 100P-50 CH CHIP CAPACITOR,0.1-25 C-CAP,S 100P-50
CH CHIP CAPACITOR,0.1-25
CHIP CAPACITOR,0.1-25 CHIP CAP 1000P C-CAP,S 220P-50 CH CHIP CAPACITOR,0.1-25
CHIP CAPACITOR,0.1-25
CONN,15P V 9604SC CONN,08P V 9604S-08C FF-CABLE,15P 1.25 FF-CABLE,8P 1.25 LED
,SLR-342VCT31 RED
LED,SELU1E10CXM-LF70 BLUE-DEF LED,SELU1E10CXM-LF70 BLUE-DEF LED,SEL6510C-TP5
GRN LED,SEL6510C-TP5 GRN LED,SEL6510C-TP5 GRN
LED,SEL6510C-TP5 GRN LED,SEL6510C-TP5 GRN LED,SEL6510C-TP5 GRN LED,SEL6510C-
TP5 GRN LED,SEL6510C-TP5 GRN
LED,SEL6510C-TP5 GRN LED,SEL6510C-TP5 GRN LED,SLR-56PT-T31-W LED,LTL-307KK
PGRN<HS,LH> LED,SLR-56PT-T31-W
LED,LTL-307KK PGRN<HS,LH> LED,SLR-56PT-T31-W LED,LTL-307KK PGRN<HS,LH> LED
,SLR-56PT-T31-W LED,LTL-307KK PGRN<HS,LH>
LED,SLR-56PT-T31-W LED,LTL-307KK PGRN<HS,LH>
REF. NO.
LED456 LED456 LED461 LED462 LED463
PART NO.
KANRI
DESCRIPTION
NO.
87-A40-537-040 LED,SLR-56PT-T31-W
87-A40-809-040 LED,LTL-307KK PGRN<HS,LH>
87-A40-317-080 LED,SLR-342VCT31 RED
87-A40-317-080 LED,SLR-342VCT31 RED
87-A40-317-080 LED,SLR-342VCT31 RED
LED464 LED465 LED521 LED522 S201
87-A40-317-080 87-A40-317-080 87-A40-678-010 87-A40-678-010 87-A90-095-080
LED,SLR-342VCT31 RED LED,SLR-342VCT31 RED LED,SELU1E10CXM BLUE-DEF LED,SELU1E10CXM BLUE-DEF SW,TACT EVQ11G04M
S202 S203 S204 S205 S206
87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080
SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M
S207 S208 S211 S212 S213
87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080
SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M<HS,LH> SW,TACT EVQ11G04M<HS,LH>
S214 S215 S216 S217 S221
87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080
SW,TACT EVQ11G04M SW,TACT EVQ11G04M<HS,LH> SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M
S222 S223 S224 S225 S226
87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080
SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M<HS,LH>
S227 S228 S229 S230 S231
87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080
SW,TACT EVQ11G04M<HS,LH> SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M
S232 S241 S242 S243 S244
87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080
SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M
S245 S246 S247 S248 S249
87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080
SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M
S250 S251 SW501
87-A90-095-080 87-A90-095-080 87-A91-739-010
SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,RTRY EC12E12404-25MM RT
AMP C.B
C101 C102 C103 C104 C107
87-010-188-080 87-010-188-080 87-010-405-080 87-010-405-080 87-010-404-080
C108 C111 C112 C113 C114
87-010-404-080 87-010-322-080 87-010-322-080 87-A10-812-080 87-A10-812-080
C119 C120 C121 C122 C173
87-010-197-080 87-010-197-080 87-010-260-080 87-010-260-080 87-010-186-080
C174 C205 C206 C207
87-010-186-080 87-010-187-080 87-010-187-080 87-010-403-080
CHIP CAP 6800P CHIP CAP 6800P CAP, ELECT 10-50V CAP, ELECT 10-50V CAP, ELECT
4.7-50V
CAP, ELECT 4.7-50V C-CAP,S 100P-50 CH C-CAP,S 100P-50 CH C-CAP,S 220P-200 J CH
C-CAP,S 220P-200 J CH
CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CAP, ELECT 47-25V CAP, ELECT 47-25V
CAP,CHIP 4700P
CAP,CHIP 4700P C-CAP,S 5600P-50 K B C-CAP,S 5600P-50 K B CAP, ELECT 3.3-50V
– 9 –
w
REF. NO.
C208 C209 C210 C211 C212
PART NO.
KANRI
DESCRIPTION
NO.
87-010-403-080 CAP, ELECT 3.3-50V
87-010-184-080 CHIP CAPACITOR 3300P(K)
87-010-184-080 CHIP CAPACITOR 3300P(K)
87-010-401-080 CAP, ELECT 1-50 M 11L SME
87-010-401-080 CAP, ELECT 1-50 M 11L SME
C215 C216 C217 C218 C221
87-012-156-080 87-012-156-080 87-010-260-080 87-010-260-080 87-016-100-080
C-CAP,S 220P-50 CH C-CAP,S 220P-50 CH CAP, ELECT 47-25V CAP, ELECT 47-25V CAP,E 10-50 M BP SME
C222 C223 C224 C249 C251
87-016-100-080 87-010-197-080 87-010-197-080 87-012-368-080 87-010-993-080
CAP,E 10-50 M BP SME CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM C-CAP,S 0.1-50 F C-CAP,S 0.056-25 B
C252 C253 C254 C255 C256
87-010-196-080 87-010-196-080 87-010-993-080 87-010-190-080 87-010-190-080
CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25 C-CAP,S 0.056-25 B S CHIP F 0.01 S CHIP F 0.01
C402 C413 C414 CNA103 CON101
87-010-196-080 87-A10-119-080 87-A10-119-080 8A-NF8-656-010 87-A61-011-010
CHIP CAPACITOR,0.1-25 CAP,E 10-100 REA CAP,E 10-100 REA CONN ASSY,5P TID-A(400) CONN,13P H BLK TAC-L13P-A3
CON102 J201 L251 L252 R161
87-A61-011-010 87-A61-148-010 87-A50-610-010 87-A50-610-010 87-A00-418-010
CONN,13P H BLK TAC-L13P-A3 JACK,PIN 4P R/W BLUE COIL,1UH K(MDEC) COIL,1UH K(MDEC) RES,M/F 0.15-3W J
R162 R165 R166 R231 R232
87-A00-418-010 87-A00-418-010 87-A00-418-010 87-A00-258-080 87-A00-258-080
RES,M/F 0.15-3W J RES,M/F 0.15-3W J RES,M/F 0.15-3W J RES,M/F 0.22-1W J RES,M/F 0.22-1W J
R243 R244 RY201 TH101 TH102
87-A00-258-080 87-A00-258-080 87-A91-686-010 87-A91-042-080 87-A91-042-080
RES,M/F 0.22-1W J RES,M/F 0.22-1W J RELAY,G5PA-28(OMROM) C-THMS,100K 55001 C-THMS,100K 55001
WH103 87-A90-459-010 HLDR,WIRE 2.5-5P
PT C.B
C1 C2 C8 C9 C10
C11 C12 C13 C16 C18
C19 C20 C21 C22 C23
C27 C28 C29 C30 C31
C32 C33 C34 C35 C36
87-010-387-080 87-A11-148-080 87-A11-148-080 87-A11-148-080 87-A11-148-080
87-A11-148-080 87-010-917-000 87-010-917-000 87-010-403-040 87-A11-148-080
87-A11-148-080 87-A11-148-080 87-A11-148-080 87-A10-231-090 87-A10-231-090
87-A11-148-080 87-A11-148-080 87-A11-148-080 87-A11-148-080 87-A11-148-080
87-A11-148-080 87-A11-148-080 87-A11-148-080 87-A11-148-080 87-A11-148-080
CAP,E 470-25 SME CAP,TC U 0.1-50 Z F CAP,TC U 0.1-50 Z F CAP,TC U 0.1-50 Z F
CAP,TC U 0.1-50 Z F
CAP,TC U 0.1-50 Z F CAP,E 3300-50 M SMG CAP,E 3300-50 M SMG CAP,E 3.3-50 SME
CAP,TC U 0.1-50 Z F
CAP,TC U 0.1-50 Z F CAP,TC U 0.1-50 Z F CAP,TC U 0.1-50 Z F CAP,E 3300-80
CAP,E 3300-80
CAP,TC U 0.1-50 Z F CAP,TC U 0.1-50 Z F CAP,TC U 0.1-50 Z F CAP,TC U 0.1-50 Z
F CAP,TC U 0.1-50 Z F
CAP,TC U 0.1-50 Z F CAP,TC U 0.1-50 Z F CAP,TC U 0.1-50 Z F CAP,TC U 0.1-50 Z
F CAP,TC U 0.1-50 Z F
REF. NO. PART NO.
KANRI
DESCRIPTION
NO.
C37
87-A11-148-080 CAP,TC U 0.1-50 Z F
C38
87-A11-148-080 CAP,TC U 0.1-50 Z F
! CN1
87-A61-110-010 CONN,9P V TID-A
! CN2
87-A61-108-010 CONN,5P V TID-A
! FC1
87-033-213-080 FUSE, CLAMP PFC5000
! FC2 ! FC3 ! PR3 ! PT1 ! PT1
87-033-213-080 87-033-213-080 87-A90-195-080 8A-NF4-601-010 8A-NF4-602-010
FUSE, CLAMP PFC5000 FUSE, CLAMP PFC5000
! PT1 ! PT2 ! PT2 ! PT2 ! RY1
8A-NF4-605-010 8A-NF8-673-010 8A-NF8-661-010 8A-NF8-662-010 87-A90-976-010
PT,HS EI96-60 ANF-4
! RY2 ! S1
T1 T2
87-A91-300-010 87-A90-165-010 87-A60-317-010 87-A60-317-010
RELAY,AC 12V-ALA2PF12
GEQ C.B
C201 C202 C205 C207 C208
87-010-402-080 87-010-402-080 87-010-404-080 87-016-669-080 87-016-669-080
C209 C210 C211 C212 C213
87-016-460-080 87-016-460-080 87-012-365-080 87-012-365-080 87-010-956-080
C214 C215 C216 C217 C218
87-010-956-080 87-010-197-080 87-010-197-080 87-010-198-080 87-010-198-080
C219 C220 C221 C222 C223
87-010-183-080 87-010-183-080 87-010-188-080 87-010-188-080 87-010-178-080
C224 C225 C226 C227 C228
87-010-178-080 87-010-182-080 87-010-182-080 87-010-112-080 87-010-196-080
C229 C230 C231 CN201
87-010-322-080 87-010-322-080 87-010-322-080 87-A60-546-010
CAP, ELECT 2.2-50V CAP, ELECT 2.2-50V CAP, ELECT 4.7-50V C-CAP,S 0.1-25 K B
C-CAP,S 0.1-25 K B
C-CAP,S 0.22-16 B C-CAP,S 0.22-16 B C-CAP,S 0.027-25VBK C-CAP,S 0.027-25VBK
CHIP-CAP,S 0.068-25B
CHIP-CAP,S 0.068-25B CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CAP, CHIP 0.022 CAP,
CHIP 0.022
C-CAP,S 2700P-50 B C-CAP,S 2700P-50 B CAP,CHIP 6800P CAP,CHIP 6800P CHIP CAP
1000P
CHIP CAP 1000P C-CAP,S 2200P-50 B C-CAP,S 2200P-50 B CAP, ELECT 100-16V CHIP
CAPACITOR,0.1-25
C-CAP,S 100P-50 CH C-CAP,S 100P-50 CH C-CAP,S 100P-50 CH CONN,11P H GRY TUC-
P11X-C1
VM C.B CN301
87-A60-079-010
CONN,08P H 9604S-08F
VOLUME C.B
S511 S512 S513 S514 S515
87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080
SW101 87-A91-740-010
SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M
SW,TACT EVQ11G04M
SW,RTRY EC12E24308-30MM
MIC C.B
C161 C162 C601
87-010-178-080 87-012-156-080 87-010-196-080
CHIP CAP 1000P C-CAP,S 220P-50 CH CHIP CAPACITOR,0.1-25
– 10 –
w
REF. NO.
C602 C603 C604 C605 C606
PART NO.
KANRI
DESCRIPTION
NO.
87-010-186-080 CAP,CHIP 4700P
87-010-112-040 CAP,E 100-16
87-010-405-040 CAP,E 10-50
87-010-546-040 CAP,E 0.33-50
87-010-320-080 CHIP CAP 68P
C608 C621 CN602 J601 J602
87-012-157-080 87-010-178-080 87-A60-082-010 87-A61-242-010 87-A61-242-010
C-CAP,S 330P-50 CH CHIP CAP 1000P CONN,05P H 9604S-05F JACK,6.3 BLK MONO W/SW V KM JACK,6.3 BLK MONO W/SW V KM
L601 87-003-098-080 COIL,2.2UH K LAL02
CD KEY C.B
LED311 LED312 LED313 LED314 LED315
87-A40-380-180 87-A40-380-180 87-A40-380-180 87-A40-380-180 87-A40-380-180
S311 S312 S313 S314 S315
87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080
S316 S317
87-A90-095-080 87-A90-095-080
LED,SEL6510C-TP5 GRN LED,SEL6510C-TP5 GRN LED,SEL6510C-TP5 GRN LED,SEL6510C-
TP5 GRN LED,SEL6510C-TP5 GRN
SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M
SW,TACT EVQ11G04M
SW,TACT EVQ11G04M SW,TACT EVQ11G04M
REF. NO. PART NO. DECK C.B
KANRI NO.
DESCRIPTION
W1 CON105 SFR1 SOL1 SOL2
82-ZM3-601-010 87-099-756-010 87-024-581-010 82-ZM1-618-410 82-ZM1-618-410
RBN,CORD,4P-75 CONN,15P 9604 S F SFR,3.3K DIA 6H SOL ASSY,27 SOL ASSY,27
SW1
87-A90-248-010 SW,MICRO ESE11SH2CXQ
SW2
87-A90-248-010 SW,MICRO ESE11SH2CXQ
SW3
87-A90-248-010 SW,MICRO ESE11SH2CXQ
SW4
87-036-110-010 SW,MICRO SPPB62
SW5
87-036-110-010 SW,MICRO SPPB62
SW6
87-036-110-010 SW,MICRO SPPB62
SW8
87-A90-248-010 SW,MICRO ESE11SH2CXQ
SW9
87-A90-248-010 SW,MICRO ESE11SH2CXQ
HEAD-1 C.B 85-ZM3-602-010
PWB,FLEX A
HEAD-2 C.B
85-ZM3-602-010 CON351 87-NF6-616-010
PWB,FLEX A CONN ASSY,8P-RPB
CHIP RESISTOR PART CODE
Chip Resistor Part Coding
88
A
Resistor Code
Chip resistor
Wattage 1/16W 1/16W 1/10W 1/8W
Type 1005 1608 2125 3216
Tolerance 5% 5% 5% 5%
Figure Value of resistor
Symbol CJ CJ CJ CJ
Dimensions (mm)
Form
LW
: A t Resistor Code : A
1.0 0.5 0.35
104
L
t 1.6 0.8 0.45
108
W
2 1.25 0.45
118
3.2 1.6 0.55
128
– 11 –
w
TRANSISTOR ILLUSTRATION
E C B
KTA1266GR KTC3198GR KTC3199GR CSA952K
CD1585BC CSC4115BC
E C B
CC5551
E C B
DTC114ES
E C B
2SB1436
D
C
B C E
2SB1370 FP1016 FN1016
E C B
2SB1237Q
G D S
2SK3053
G S
2SK2158 2SJ461-T1
B E
2SA1235F KRA104S 2SC2714O KRA107S 2SC3052F KRC102S-RTK CMBT5551 RT1N141C
CMBT5401 RT1P141C CSD1306E RT1P144C DTA143EKA RT1P441C KRA102S
Pin Name
I/O
CLK
O
DATA
O
STB
O
CS-RHYTHM
O
GEQ-CE
O
HP-MUTE
I
O-POWER
O
PLL-CE
O
O-MUTE
O
I-MIC
I
RESET
I
VOL-JOG
I
MULTI-JOG
I
VSS1
CF 1
CF2
VDD1
HOLD
I
KEY 1 ~ 4
I
I-CDSW
I
I-DISH
I
I-SPEANA
I
I-RDSCLK/I-WRQ I
I-TU-SIG/MS
I
I-TMBASE
I
I-RMC
I
G13 ~ G1
O
P39 ~ P37
O
VDD3
P36/SPEANA A
O
P35/SPEANA B
O
P34/SPEANA C
O
P33
O
VP
P32 ~ P25
O
60
P24/NO AC-DEMO I/O
61
P23/CASINO-DEMO I/O
62
P22/NO-ECO
I/O
63
P21/NO-RHYTHM I/O
64
P20/AC3-DPL
I/O
Description Common serial CLOCK output. Common Serial DATA output. Common
serial STROBE output. Rhythm IC chip select output. GEQ IC chip enable output.
Headphone plug-in detect input. (Output “L” at HOLD) System power ON/OFF
output. (Active “H”) Tuner PLL IC chip enable output. System mute ON/OFF
output. Auto-VF MIC level special A/D input. (Output “L” at HOLD) Reset input.
Main volume JOG rotary encoder A/D input. MULTI JOG rotary encoder A/D input.
Connected to GND.
9.43MHz oscillator circuit.
Power supply. Power supply voltage detect A/D input. KEY 1 ~ 4 A/D input.
(Output “L” at HOLD) CD mechanism SW A/D input. (Output “L” at HOLD) CD
turntable photo sensor A/D input. (Output “L” at HOLD) SPEANA level A/D input.
(Output “L” at HOLD) TUNER RDS IC CLK input(not used) / CD WRQ input. (Output
“L” at HOLD&INI) Tuner tuning signal level A/D input / Deck MS SENS. (Output
“L” at HOLD) Timebase clock (8Hz) input. (Output “L” at HOLD) Remote control
signal input. Active: “L”. (Output “L” at HOLD) FL grid G13 ~ G1 output. FL
segment P39 ~ P37 output. Power supply. FL segment P36 output / SPEANA band
select output (A) . FL segment P35 output / SPEANA band select output (B) . FL
segment P34 output / SPEANA band select output (C). FL segment P33 output.
Power supply for FL. FL segment P32~ P25 output. FL segment P24 output / NO
AC-DEMO at AC-IN diode input. (No store DEMO mode.) FL segment P23 output /
CASINO-DEMO select diode input. FL segment P22 output / NO-ECO select input.
FL segment P21 output / NO-RHYTHM select diode input(not used). FL segment P20
output / AC3-DPL select diode input(not used).
– 37 –
w
Pin No. 65 66 67 68 69 70 71 72
73~76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
96
97
98
99 100
Pin Name
I/O
P19/K-CON
I/O
P18/RDS
I/O
P17/FM1
I/O
P16/SW
I/O
P15/LW
I/O
P14/AM-10K
I/O
P13/AM-ST
I/O
VDD4
P12~P9
O
P8/REA
I/O
P7/CST1
I/O
P6/CAM1
I/O
P5/AUTO2
I/O
P4/AUTO1
I/O
P3/CAM2
I/O
P2/REB
I/O
P1/CST2
I/O
K-SCAN
O
SOL1
O
SOL2
O
O-MOTOR
O
VSS2
VDD2
ODISHREV
O
O-DISHFWD
O
O-OPEN
O
O-CLOSE
O
IFC-TU/I-SQDATA I
I-STEREO/I-DRF I/O
(O-CLK-VCD)
O-DATA(CD)/ I/O
I-RDS DATA
CD-CE/
I/O
IO BUSY (VCD)
CLK (CD)
O
STB(SHIFT)
O
Description FL segement P19 output / K-CON select diode input(not used). FL
segement P18 output / RDS select diode input(not used). FL segment P17 output
/ FM1 select diode input(not used). FL segment P16 output / SW step initial
diode input(not used). FL segment P15output / LW stereo select diode input(not
used). FL segment P14 output /AM-10K select diode input(U,LH). FL segment P13
output / AM-ST select diode input(not used). Power supply. FL segment P12~P9
output. FL segment P8 ouput / REC enable (A) switch input (active: “L”). FL
segment P7 output / Cassette (1) switch. FL segment P6 output / CAM (1) switch
input (active: “L”). FL segment P5 output / Auto stop reel (2) pulse input. FL
segment P4 output / Auto stop reel (1) pulse input. FL segment P3 output / CAM
(2) switch input. (active:”L”). FL segment P2 output / REC enable (B) switch
input. (active:”L”). FL segment P1 output / Cassette (2) switch input.
(active:”L”). Key scan output. (active:”L”). DECK (1) solenoid ON/OFF output.
DECK (2) solenoid ON/OFF output. Deck motor ON/OFF output . Connected to GND.
Power supply. CD turn table dish reverse output. CD turn table dish forward
output. CD tray open output. CD tray close output. Tuner tune/IF count input
(active: “L”) / CD SUB-Q data input.
Tuner stereo detect input (active “L”) / DRF input.
CD IC control data output / Tuner RDS data input(not used).
CD chip enable output.
CD IC control clock output. Shift register strobe output.
– 38 –
w
ADJUSTMENT <TUNER/DECK>
A MAIN C.B
12 14
7
6
7
3
SFR352 IC303 SFR306 SFR302 SFR301
SFR351
L801
SFR305
SFR303
SFR304
L802
IC801 24 TP6 (CLK)
TP5 R815 TP4
L951
(3/3)
(1/3)
4
TP3 FFE831 (VT)
11
GND TP10 (LCH)
TP7 (LCH)
TP9
TP8 (RCH)
GND (RCH)
IC601
3
5
6
7
15 14 13 12 11 10 9 8
1
B DISPLAY C.B
FL101
IC101
24
TP1 (K-SCAN) TP2(GND) L101
K DECK C.B
SFR1 8
16
DECK-1 P,DECK-2 R/P/E HEAD
– 39 –
w
9 REV
9 FWD
< TUNER SECTION >- Clock Frequency Check
Settings : · Test point :
TP6 (CLK)
Method : Set to AM 1710kHz<U,LH>, 1602kHz
and check that the test point is 2160kHz ± 45Hz
<U,LH>, 2052kHz ± 45Hz
- AM VT Check
Settings : · Test point :
TP3 (VT)
Method : Set to AM 1710kHz<U,LH>, 1602kHz
and AM 530kHz<U,LH>, 531kHz
check that the test point is less than 8.5V
(1710kHz)<U,LH>, 8.0V(1692kHz)
and more than 0.6V(530kHz,531kHz)
- AM Tracking Adjustment Settings : · Test point : TP7(Lch), TP8(Rch) · Adjustment location : L951(1/3)…………………… 999kHz Method : Set to AM 999kHz and adjust L951(1/3) so that the test point is max.
- FM VT Check
Settings : · Test point :
TP3 (VT)
Method : Set to FM 108.0MHz and check that the test
point is less than 8.0V.
Set to FM 87.5MHz and check that the test
point is more than 0.5V.
- FM Tracking Check
Settings : · Test point :
TP7(Lch), TP8(Rch)
Method : Set to FM 98.0MHz and check that the test point
is less than 9.0dBµV<U,LH>, 13dBµV
- AM IF Adjustment
Settings : · Test point :
TP7(Lch), TP8(Rch)
- Adjustment location : L802
- Input level :
Variable
Method : Adjust L802 so that the output becomes max.
- DC Balance / Mono Distortion Adjustment
Settings : · Test point :
TP4, TP5
(DC Balance)
TP7(Lch), TP8(Rch)
(Distortion)
- Adjustment location : L801
- Input level :
60dBµV
Method : Set to FM 98.0MHz and adjust L801 so that the
voltage between TP4 and TP5 becomes 0V ±
0.04V.
Next, check that the distortion is less than 1.3%
< DECK SECTION >- Tape Speed Adjustment (DECK 1, DECK 2)
Settings : · Test tape :
TTA100(3kHz)
- Test point :
TP9(Rch), TP10(Lch)
- Adjustment location : SFR1
Method : Play back the test tape and adjust SFR1 so that
the frequency counter reads 3000Hz ±
5Hz(FWD) and ± 45Hz(REV) with respect to
forward speed.
- Head Azimuth Adjustment (DECK 1, DECK 2)
Settings : · Test tape :
TTA300 (315/10kHz)
- Test point :
TP9(Rch), TP10(Lch)
- Adjustment location : Head azimuth
adjustment screw
Method : Play back the 10kHz signal of the test tape
and adjust screw so that the output becomes
maximum. Next, perform on each FWD PLAY
and REV PLAY mode.
- PB Frequency Response Check (DECK 1, DECK 2) Settings : · Test tape : TTA300 (315/10kHz) · Test point : TP9(Rch), TP10(Lch) Method : Play back the 315Hz and 10kHz signals of the test tape and check that the output ratio of the 10kHz signal with respect to that of the 315Hz signal is within 0 ± 2dB.
- PB Sensitivity Adjustment (DECK 1, DECK 2) Settings : · Test tape : TTA200 (400Hz) · Test point : TP9(Rch), TP10(Lch) · Adjustment location : SFR301 (DECK 1, Lch) SFR302 (DECK 1, Rch) SFR303 (DECK 2, Lch) SFR304 (DECK 2, Rch) Method : Play back the test tape and adjust SFRs so that the output level of the test points become 245mV±10mV.
- REC/PB Frequency Response Adjustment (DECK 2) Settings : · Test tape : TTA602 (Normal) · Test point : TP9(Rch), TP10(Lch) · Input signal : 1kHz / 10kHz (LINE IN) · Adjustment location : SFR351 (Lch) SFR352 (Rch) Method : Apply a 1kHz signal and REC mode. Then adjust OSC attenuator so that the output level at the test points becomes 12.5mV. Record and play back the 1kHz and 10kHz signals and adjust SFRs so that the output level of the 10kHz signals becomes 0dB ± 0.5dB with respect to that of the 1kHz signal.
- REC/PB Frequency response Check (DECK 2) Settings : · Test tape : TTA-615 (CrO2) · Test point : TP9(Rch), TP10(Lch) · Input signal : 1kHz/10kHz (LINE IN) Method : Apply a 1kHz signal and REC mode. Then Adjust OSC attenuator so that the output level at the test points becomes 12.5mV. Record and play back the 1kHz and 10kHz signals and check that the output is 0dB ± 2dB.
- REC/PB Sensitivity Adjustment (DECK 2) Settings : · Test tape : TTA602 (Normal) · Test point : TP9(Rch), TP10(Lch) · Input signal : 1kHz (LINE IN) · Adjustment location : SFR305 (Lch) SFR306 (Rch) Method : Apply a 1kHz signal and REC mode. Then adjust OSC attenuator so that the output level at the test points becomes 125mV. Record the play back the 1kHz signal and adjust SFRs so that the output level becomes 0dB ± 0.5dB.
– 40 –
w
- REC/PB Sensitivity Check (DECK 2)
Settings : · Test tape : · Test point :
TTA-615 (CrO2) TP9(Rch), TP10(Lch)
- Input signal :
1kHz (LINE IN)
Method : Apply a 1kHz signal and REC mode. Then adjust OSC
attenuator so that the output level at the test points
becomes 125mV. Record and play back the 1kHz signal
and check that the output is 0dB ± 1.5dB.
- µ-CON OSC Adjustment
Settings : · Test point :
TP1(K-SCAN)
- Adjustment location : L101
Method : Insert AC plug with pressing TUNER function key.
Adjust L101 so that the frequency across the test
point is 208.8Hz ± 0.2Hz.
– 41 –
w
MECHANICAL EXPLODED VIEW 1 / 1
– 42 –
w
MECHANICAL PARTS LIST 1 / 1
REF. NO.
1 2 3 4 5
PART NO.
KANRI
DESCRIPTION
NO.
88-NF3-090-010 8A-NF3-042-010 8A-NF3-029-010
RING,FOOT PANEL ASSY,TRAY BOX,CASS R
8A-NF3-040-010 PANEL,CASS R
8A-NF3-059-010 WINDOW,CASS R
6 8A-NF3-039-010 7 8A-NF3-058-010 8 8A-NF3-028-010 9 8A-NF3-090-010 10 81-532-080-010
PANEL,CASS L WINDOW,CASS L BOX,CASS L REFLECTOR,CASS L LABEL, CASS. COMPT
11 8A-NF3-091-010 12 8A-NF3-048-010 13 8A-NF3-049-010 14 8A-NF3-047-010 15 8A- NF3-071-010
REFLECTOR,CASS R PANEL,REFLECTOR- CD PANEL,KEY-CD PANEL,CD KEY,CD
16 8A-NF3-089-010 17 8A-NF3-203-010 18 87-NF4-216-010 19 86-NF9-224-010 20 82-NF5-229-010
REFLECTOR,CD GUIDE,LED-CD HLDR,LOCK 1 SPR-C,LOCK PLATE,LOCK
21 87-NF8-220-010 22 82-NF5-218-010 23 8A-NF3-082-010 24 8A-NF3-087-010 25 8A- NF3-077-010
DMPR,150 SPR-T,EJECT 1 (SIN) KNOB,RTRY JOG REFLECTOR,JOG RING,JOG H<HS,LH>
25 8A-NF3-078-010 26 8A-NF3-081-010 27 8A-NF3-076-010 28 8A-NF3-001-010 29 8A- NF4-051-010
RING,JOG U KNOB,RTRY VOL RING,VOL CABI,FR WINDOW,DISP<HS,LH>
29 8A-NF4-052-010 30 8A-NF3-031-010 30 8A-NF3-034-010 31 8A-NF3-063-010 32 8A- NF3-073-110
WINDOW,DISP U PANEL,FR U PANEL,FR LH<HS,LH> KEY ASSY,OPE KEY,REC U
33 8A-NF3-065-010 34 8A-NF3-061-010 35 8A-NF3-067-010 36 8A-NF3-072-010 37 8A- NF3-088-010
KEY,KARAOKE KEY,GEQ KEY,BBE KEY,FUNC REFLECTOR,FUNC
38 8A-NF3-068-010 39 8A-NF3-062-010 40 8A-NF3-069-010 41 8A-NF3-070-010 42 8A- NF3-201-010
KEY,JOG KEY,DSP KEY,SPICE KEY,ECO GUIDE,LED-FUNC
REF. NO.
43 44 45 46 47
PART NO.
KANRI
DESCRIPTION
NO.
8A-NF3-213-110 8A-NF3-214-010 8A-NF3-210-010 8A-NF3-208-010
HLDR,HT-SINK L HLDR,HT-SINK R HLDR,SIDE L HLDR,CHAS L
87-NF4-221-010 HLDR,CABLE
48 87-A91-423-010 ! 49 87-A80-148-010 ! 49 87-A80-149-010 ! 49 87-A80-155-010
50 87-085-185-010
FAN,AD0612DS-D7OGL AC CORD ASSY,E BLK
50 87-A91-422-010 51 8A-NF3-209-010 52 8A-NF3-211-010 53 8A-NF3-229-010 54 8Z- NF3-210-010
BUSHING, AC CORD (U) HLDR,CHAS R HLDR,SIDE R HLDR,BRACKET GUIDE,FL
55 8A-NF3-212-010 56 84-ZG1-245-210 57 8A-NF3-026-010 58 8Z-NF3-048-010 59 82-NF5-219-010
HLDR,REAR CAP,OPTICAL CABI,BOTTOM COVER, BOTTOM SPR-T,EJECT 2 (SIN)
60 87-NF4-217-110 61 87-064-185-010 62 8A-NF8-206-010 63 8A-NF3-221-010 64 8A- NF3-225-010
HLDR,LOCK 2 HLDR,WIRE HLDR,PWB M HLDR,IC-VM COVER, HLDR
65 8A-NF3-223-010 66 87-A91-711-010 67 8A-NF4-011-010 67 8A-NF4-013-010 67 8A- NF4-016-010
HLDR,FAN FAN, 3110GL-B4W-B34-H02 -400MM CABI,REAR LHSM
68 8A-NF3-228-010 69 8A-NF3-027-010
A 87-067-703-010 B 87-067-581-010 C 87-721-097-410
HLDR,PWB-PT CABI,STEEL TAPPING SCREW, BVT2+3-10 S-SCREW,BVT2+3-15 W/O SLOT QT2+3-12 GLD
D 87-591-095-410 E 87-B10-190-010 F 87-067-689-010 G 87-067-761-010 H 87-NF4-224-010
TAPPING SCREW, QIT+3-8 (GLD) BVT2+3-22 W/O SLOT TAPPING SCREW, BVTT+3-8 S-SCREW,BVT2+3-10 BLK S-SCREW,IT3B+3-8 CU
I 87-721-096-410 J 87-067-758-010 K 87-067-975-010 L 87-067-641-010 M 87-067-579-010
QT2+3-10 W/O SLOT S-SCREW,BVT2+3-12 W/O SLOT S-SCREW,IT+4-8 UTT2+3-8(W/O SLOT)BL BUT2+3-8W/O SLOT
COLOR NAME TABLE
Basic color symbol
Color
Basic color symbol
Color
Basic color symbol
Color
B
Black
C
Cream
D
Orange
G
Green
H
Gray
L
Blue
LT
Transparent Blue
N
Gold
P
Pink
R
Red
S
Silver
ST
Titan Silver
T
Brown
V
Violet
W
White
WT
Transparent White
Y
Yellow
YT
Transparent Yellow
LM
Metallic Blue
LL
Light Blue
GT
Transparent Green
LD
Dark Blue
DT
Transparent Orange
– 43 –
w
TAPE MECHANISM EXPLODED VIEW 1 / 1
14
15 A
B B
42 PH(DECK 1) RPH(DECK 2)
16
12
11
10
13 17
9
18 (DECK 2)
7
3
18
(DECK 1)
19
2
5
6
A 20
4
HEAD 1 C.B(DECK 1) HEAD 2 C.B(DECK 2)
22
57 (DECK 1)
29
24
(DECK 2)
21 25
23 26
A
1
29 (DECK 2) 27
28
51 52
SOL 2 8
DECK C.B
8
49
A
47
37 36
50 56
SOL 1
44 41
43 35 48
33
41 E
45
50 B
46 D
31
34
32 C
A 59
58
D
40 55
(DECK 1) 39
B
D
38
C
– 44 –
w
C 54 53
TAPE MECHANISM PARTS LIST 1 / 1
REF. NO.
1 2 3 4 5
PART NO.
KANRI
DESCRIPTION
NO.
82-ZM3-301-510 CHAS ASSY,M2
82-ZM1-258-110 SPR-T,PINCH L
82-ZM1-341-110 LVR ASSY,PINCH L2
82-ZM1-333-010 PLATE,LINK 2
82-ZM1-266-11K LVR,DIR
6 82-ZM1-214-010 7 82-ZM1-206-81K 8 82-ZM3-340-010 9 82-ZM1-269-210 10 82-ZM1-219-110
SPR-T,DIR CHAS,HEAD SH,BELT D2 SPR-T,BRG SPR-T,LINK
11 82-ZM1-210-110 12 82-ZM1-213-010 13 82-ZM1-207-610 14 86-ZM4-206-010 15 82-ZM1-314-110
GEAR,H T SPR-T,HEAD GUIDE,TAPE S-SCREW,AZIMUTH PLATE,HEAD
16 82-ZM1-208-110 17 82-ZM1-218-010 18 82-ZM1-263-110 18 82-ZM1-264-010 19 82-ZM1-222-21K
HLDR,HEAD SPR-E,HB LVR,EJECT L (DECK 1) LVR,EJECT R (DECK 2) LVR,PLAY
20 82-ZM1-217-310 21 82-ZM1-244-510 22 82-ZM1-285-310 23 82-ZM1-257-010 24 82-ZM1-241-310
REEL TABLE SPR-C,BT SPR-C,BT L SPR-T,CAS LVR,MC
25 82-ZM1-242-010 26 82-ZM1-243-010 27 82-ZM1-344-110 28 82-ZM1-259-110 29 82-ZM1-240-11K
LVR,CAS LVR,STOP LVR ASSY,PINCH R2 SPR-T,PINCH R LVR,REC (DECK 2)
31 82-ZM1-255-310 32 82-ZM3-305-01K 33 82-ZM1-227-21K 34 82-ZM3-306-11K 35 82-ZM1-265-110
SPR-E,LVR DIR GEAR,CAM M2 LVR,TRIG LVR,FR M2 SPR-E,TRIG
REF. NO.
36 37 38 39 40
PART NO.
KANRI
DESCRIPTION
NO.
82-ZM3-339-010 86-ZM1-206-010 82-ZM1-322-010 82-ZM1-220-210
SHAFT,COUPLER N3(DECK 1) BELT,MAIN L SPR-T,FR60 GEAR,IDLER
82-ZM3-616-010 RING MAGNET 4
41 82-ZM1-216-31K 42 87-A90-319-010 42 87-A90-320-010 43 82-ZM1-225-21K 44 82-ZM1-226-010
GEAR,REEL HEAD,PH HADKH2 FPC HEAD,RPH HADKH5 FPC GEAR,FR GEAR,REW
45 82-ZM3-333-310 46 82-ZM1-338-010 47 82-ZM1-349-110 47 82-ZM3-338-110 48 82-ZM1-348-010
SLIP DISK ASSY 2 BELT FR4 FLY-WHL,R W(DECK 2) FLY-WHL,R3 W(DECK 1) FLY-WHL,L W(DECK 2)
48 82-ZM1-348-010 49 82-ZM3-329-210 50 82-ZM1-245-210 51 87-045-347-019 52 82-ZM3-221-010
FLY-WHL,L W(DECK 1) BELT,SBU R2 HLDR,IC MOT,SHU2L 70(M1) PULLEY,MOT 2M
53 82-ZM1-288-019 54 80-ZM6-243-019 55 82-ZM3-335-210 56 82-ZM3-337-010 57 82-ZM3-339-010
SH,1.63-3.2-0.5 SLT SH,1.75-3.6-0.5 SLT PULLEY,COUPLER M3(DECK 1) BELT,SBU MOT 2 SHAFT,COUPLER N3(DECK 1)
58 86-ZM1-206-010 59 82-ZM3-340-010
A 85-ZM3-202-010 B 80-ZM6-207-019 C 82-ZM3-318-019
BELT,MAIN L SH,BELT D2 S-SCREW,TG V+1.6-7 S-SCRW MOTOR M2
D 87-B10-043-010 W-P,0.99-4-0.25 SLT E 82-ZM3-334-010 PW,2.16-6-0.4
– 45 –
w
SPEAKER DISASSEMBLY INSTRUCTIONS
Type.1 Insert a flat-bladed screwdriver into the position indicated by the
arrows and remove the panel. Remove the screws of each speaker unit and then
remove the speaker units.
Type.4
TOOLS
1 Plastic head hammer 2 (() flat head screwdriver 3 Cut chisel
Type.2
Remove the grill frame and four pieces of rubber caps by pulling out with a
flat-bladed screwdriver. Remove the screws from hole where installed rubber
caps. Insert a flat-bladed screwdriver into the position indicated by the
arrows and remove the panel. Remove the screws of each speaker unit and then
remove the speaker units.
12 3
How to Remove the PANEL, FR
1. Insert the (() flat head screwdriver tip into the gap between the PANEL,
FR and the PANEL, SPKR. Tap the head of the (() flat head screwdriver with the
plastic hammer head, and create the clearance as shown in Fig-1.
2. Insert the cut chisel in the clearance, and tap the head of the cut chisel
with plastic hammer as shown in Fig-2, to remove the PANEL, FR.
3. Place the speaker horizontally. Tap head of the cut chisel with plastic
hammer as shown in Fig-3, and remove the PANEL, FR completely.
Type.3
Insert a flat-bladed screwdriver into the position indicated by the arrows and
remove the panel. Turn the speaker unit to counterclockwise direction while
inserting a flat-bladed screwdriver into one of the hollows around speaker
unit, and then remove the speaker unit. After replacing the speaker unit,
install it turning to clockwise direction until “click” sound comes out.
Fig-1
Fig-2
Fig-3
How to Attach the PANEL, FR
Attach the PANEL, FR to the PANEL, SPKR. Tap the four corners of the PANEL, FR
with the plastic hammer to fit the PANEL, FR into the PANEL, SPKR completely.
– 46 –
w
SX-WND77 (YUSL), SX-WNT77 (YSL)
REF. NO.
1 2 3 4 5
PART NO.
KANRI
DESCRIPTION
NO.
8A-NS4-001-010 8A-NS4-004-010 8A-NS4-005-010 8A-NS4-006-010
PANEL,FR PANEL,DUCT PANEL,DUCT RIN PANEL,TW R
8A-NS4-007-010 PANEL,TW L
6 8A-NS4-008-010 7 8A-MS4-009-010 8 8A-NS4-013-010 9 88-NS3-602-110 10 8A- NS4-602-010
HLDR,PIEZO GRILLE,FRAME ASSY PROTECTOR, TW SPKR,W 200 SPKR, M 120
REF. NO.
11 12 13 14
PART NO.
KANRI
DESCRIPTION
NO.
8A-MS2-605-110 88-NSK-610-010 88-NS5-610-010 88-NS5-611-010
SPKR,TW 60 SPKR, CERAMIC ASSY CORD,SPKR CORD,SPKR B/L
SX-WNT98 (YLSK1M)
REF. NO.
1 2 3 4 5
PART NO.
KANRI NO.
DESCRIPTION
8A-NS3-001-010 8A-NS3-002-010 8A-NS3-003-010 8A-NS3-004-010 8A-NS3-005-010
PANEL,FR PANEL,TW L PANEL,TW R PANEL,DUCT RING PANEL,DUCT
6 8A-NS3-006-010 7 8A-NS3-009-010 8 8A-NS3-010-010 9 8A-NS3-011-010 10 88-NS3-602-110
PANEL,TOP ADAPTOR, PROTECTOR,SQA PROTECTOR,TWA SPKR, W 200
11 8A-NS3-602-010 12 8A-MS2-605-110 13 88-NSK-610-010 14 88-NS5-610-010 15 88-NS5-611-010
SPKR,M 100 SPKR,TW 60 SPKR, CERAMIC ASSY CORD,SPKR CORD,SPKR B/L
REF. NO.
16 17 18 19 20
PART NO.
KANRI
DESCRIPTION
NO.
8A-NS3-019-010 88-NS3-020-010 8A-NS3-023-010
CORD,BUSH CORD,BUSH L FOOT,
8A-NSJ-006-010 BADGE,AIWA S35
8A-NS3-014-010 CABI,TOP
21 8A-NS3-030-010 UT2 4*12 CM
ACCESSORIES / PACKAGE LIST
REF. NO.
1 1 2 3 !4
PART NO.
KANRI
DESCRIPTION
NO.
8A-NF4-907-010 IB,LH (P) -KIT
8A-NF4-903-010 IB,U (ESF) M
87-006-225-010 AM LOOP ANT NC2
87-043-115-010 ANT,FEEDER FM
87-A91-017-010 PLUG,CONVERSION JT-0476
5 8Z-NF5-702-010 RC UNIT,RC-ZAS04
9820572 9630472 0251431
211, IKENOHATA 1CHOME, TAITO-KU, TOKYO 110, JAPAN TEL:03 (3827) 3111
Printed in Singapore
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>