Ariens 915075 Zoom 40 Zero Turn Mower User Manual
- June 17, 2024
- ARIENS
Table of Contents
915075 Zoom 40 Zero Turn Mower
User Manual
915075 Zoom 40 Zero Turn Mower
Models
915075 – Zoom 1640
915077 – Zoom 1840
915079 – Zoom 2044
915081 – Zoom 2348
915083 – Zoom 2552
915317 – Zoom 1540
915318 – Zoom 1744 THE MANUAL
Before you operate your unit, carefully and completely read manuals supplied
with the unit. The contents will provide you with an understanding of safety
instructions and controls during normal operation and maintenance.
For your safety and the safety of others always read, understand, and follow
all DANGER, WARNING, and CAUTION messages found in manuals and on safety
decals.
Hardware descriptions are given in decimals.
Decimals to Fractions
.063| 1/16| .563| 9/16
.125| 1/8| .625| 5/8
.188| 3/16| .688| 11/16
.250| 1/4| .750| 3/4
.313| 5/16| .813| 13/16
.375| 3/8| .875| 7/8
.438| 7/16| .938| 15/16
.500| 1/2| 1.00| 1
SERVICE AND REPLACEMENT PARTS
When ordering replacement parts or making service inquiries, know the Model
and Serial numbers of your unit and engine.
Numbers are located on the product registration card in the unit literature
package. They are printed on a serial number label, located on the frame of
your unit.
- Record Unit Model and Serial numbers here:
- Record Engine Model and Serial numbers here:
UNAUTHORIZED REPLACEMENT PARTS
Use only Ariens replacement parts. The replacement of any part on this vehicle
with anything other than an
Ariens authorized replacement part may adversely affect the performance,
durability, or safety of this unit and may void the warranty. Ariens disclaims
liability for any claims or damages, whether warranty, property damage,
personal injury or death arising out of the use of unauthorized replacement
parts.
PRODUCT REGISTRATION
The Ariens dealer must register the product at the time of purchase.
Registering the product will help the company process warranty claims or
contact you with the latest service information. All claims meeting
requirements during the limited warranty period will be honored, whether or
not the product registration card is returned.
Keep a proof of purchase if you do not register your unit.
Customer Note: If Dealer does not register your product, please fill out,
sign and return the product registration card to Ariens or go to
www.ariens.com.
YOUR SATISFACTION IS IMPORTANT
Questions? Please follow these helpful steps:
- Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two.
- Contact Your Dealer.
Our dealers will be happy to supply any service or advice required to keep
your unit operating at peak efficiency. A factory trained staff is available
to support your equipment needs. They stock genuine Ariens parts and
lubricants manufactured with the same precision and skill as the original.
If your questions are not resolved by the support staff, ask for the manager
or owner.
When contacting your Dealer supply your model and serial numbers.
TO SPEED PARTS ORDERING:
- Know the model and serial numbers of your unit.
- Know the part number required.
- Know the quantity required.
- Know the part description.
MODELS
Model 915075 (Zoom 1640)
16hp Kohler with 40″ Mower Deck Serial No. 025000 and up
Model 915077 (Zoom 1840)
18hp Kohler with 40″ Mower Deck Serial No. 025000 and up
Model 915079 (Zoom 2044)
20hp Kohler with 44″ Mower Deck Serial No. 025000 and up
Model 915081 (Zoom 2348)
23hp Kohler with 48” Mower Deck Serial No. 025000 and up
Model 915083 (Zoom 2552)
25hp Kohler with 52” Mower Deck Serial No. 025000 and up
Model 915317 (Zoom 1540)
15hp Kawasaki with 40″ Mower Deck Serial No. 025000 and up
Model 915318 (Zoom 1744)
17hp Kawasaki with 44” Mower Deck Serial No. 025000 and up
DECALS-SAFETY
Model 915075, 077, 079, 081, 083, 317, 318
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 05305100 | 1 | Decal, American Flag |
| 2 | 05305000 | 1 | Decal, Trailer Hitch |
| 3 | 05305200 | 2 | Decal, Transmission Disconnect |
| 4 | 05301400 | 1 | Decal, Control |
| 5 | 05233900 | 1 | Decal, Fuel Valve |
| 6 | 07757600 | 1 | Decal, Instructional Steering |
| 7 | 07731400 | 2 | Decal, Mower Pan Head Danger |
| 8 | 07742300 | 1 | Decal, Warning |
| 9 | 05304900 | 1 | Decal, Cut Height Zoom |
| 10 | 05301500 | 1 | Decal, Bilingual Danger |
| 11 | 07757500 | 1 | Decal, Parking Brake Lever |
| 12 | 07735200 | 1 | Decal, Danger |
| 13 | 07754100 | 1 | Decal, Hot Surface |
| 14 | 08088400 | 1 | Decal, Cut Height |
| 15 | 00290000 | 1 | Decal, Fuel Warning |
| 16 | 05309700 | 1 | Decal, CE Caution (317, 318) |
| 17 | 05309800 | 1 | Decal, CE Deck (317, 318) |
Model 915075, 077, 079, 081, 083, 317, 318
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 05308000 | 1 | Decal-Zoom 1640 (075) |
| 05308100 | 1 | Decal-Zoom 1540 (317) | |
| 05308200 | 1 | Decal-Zoom 1840 (077) | |
| 05308300 | 1 | Decal-Zoom 2044 (079) | |
| 05308400 | 1 | Decal-Zoom 2348 (081) | |
| 05308500 | 1 | Decal Zoom 2552 (083) | |
| 05308600 | 1 | Decal-Zoom 1744 (318) | |
| 2 | 05303100 | 1 | Decal-Ariens Jewel |
| 3 | 00370500 | 2 | Decal, Zoom Hood |
Model 075, 077
FRAME, HOOD, FOOTREST, CASTERS AND TIRES
Model 075, 077
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 00458351 | 1 | Weldment, Frame (075, 077) |
| 2 | 07056700 | 4 | Bolt, Shoulder .375-16 x .135 |
| 3 | 06212200 | 6 | Bolt, Round Head Square Neck .31-18 x .62 |
| 4 | 06542000 | 4 | Nut, Locking Top Flange .38-16 |
| 5 | 00454259 | 1 | Engine Hood |
| 6 | 01605151 | 2 | Brace, Hood |
| 7 | 06543100 | 6 | Nut, Locking Top Flange .31-18 |
| 8 | 00469351 | 2 | Fork, Caster |
| 9 | 01588100 | 2 | Assembly, Tire 4 x 11- 4 Ply |
| 10 | 06436400 | 2 | Washer, Flat Steel .511 x 1.441 x .125 |
| 11 | 00278500 | 2 | Spacer, Wheel |
| 12 | 05964400 | 2 | Bolt, Hex .50-13 x 6.50 Grade 5 |
| 13 | 06543600 | 2 | Nut, Locking Top Flange .50-13 |
| 14 | 05962200 | 2 | Bolt, Hex .50-13 x 5.00 Grade 5 |
| 15 | 05533600 | 4 | Bushing, Flange 1.00 x 1.25 x 1.50 x 1.50 |
| 16 | 00457859 | 1 | Foot Rest |
| 17 | 06223600 | 6 | Bolt, Round Head Square Neck .38-16 x 1.00 Grade 5 |
| 18 | 06545500 | 8 | Nut, .38-16 Flange Nyloc |
| 19 | 00482151 | 1 | Bumper, Zoom |
| 20 | 00363100 | 4 | Spacer, Caster |
| 21 | 07411500 | 4 | Screw, Tap .31-18 x .50 |
| 22 | 06220500 | 2 | Bolt, Round Head Square Neck .38-16 x 2.00 Grade 5 |
| 23 | 00363800 | 2 | Hood Snap |
| 24 | 06425500 | 2 | Washer, Flat Steel .375 x 1.125 x .065 |
| 25 | 06441900 | 2 | Washer, Flat Steel .531 x 1.06 x .095 |
| 26 | 07412000 | 2 | Screw, Tap .25-20 x .50 |
| 27 | 00366700 | 2 | Hood Clip |
| 28 | 00372700 | 2 | Bracket, Hood Clip |
| 29 | 00457951 | 1 | Plate, Deck Access |
| 30 | 00458051 | 1 | Bracket, Deck Access |
| 31 | 07503100 | 2 | Grommet, Bumper |
| 32 | 06216100 | 1 | Bolt, Round Head Square Neck .31-18 x 1.0 Grade 5 |
| 33 | 06514900 | 1 | Nut, Push .312 |
| 34 | 07531700 | 1 | Knob, Wing .312-18 |
FRAME, HOOD AND FOOTREST
Model 079, 081, 083, 317, 318
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 00458151 | 1 | Weldment, Frame (079, 081, 083) |
| 2 | 00458851 | 1 | Welment, Frame (317, 318) |
| 3 | 07008100 | 2 | Screw-Cap Button Head .31-18 x .50 Grade 5 |
| 4 | 01588200 | 2 | Assembly, Light (Includes Halogen H3 12 Volt 55 Watt Bulb) |
| 5 | 00474000 | 1 | Harness, Light |
| 6 | 01605151 | 2 | Brace, Hood |
| 7 | 06212200 | 6 | Bolt, Round Head Square Neck .31-18 x .62 |
| 8 | 07056700 | 4 | Bolt, Shoulder .375-16 x .135 |
| 9 | 01603100 | 2 | Bracket, Light |
| 10 | 06311200 | 4 | Washer, Locking 4MM x 1MM Regular Cone Lock |
| 11 | 05980400 | 4 | Screw, Socket Head Cap M4 x .07 x 8 |
| 12 | 06543100 | 6 | Nut-Locking-Top-Flange .31-18 |
| 13 | 06545500 | 4 | Nut, .38-16 Flange Nyloc |
| 14 | 06220500 | 2 | Bolt, Round Head Square Neck .38-16 x 2.00 Grade 5 |
| 15 | 00363800 | 2 | Hood Snap |
| 16 | 06425500 | 2 | Washer, Flat Steel .375 x 1.125 x .065 |
| 17 | 06441900 | 2 | Washer, Flat Steel .531 x 1.06 x .095 |
| 18 | 07411500 | 4 | Screw, Tap .31-18 x .50 |
| 19 | 07412000 | 2 | Screw, Tap .25-20 x .50 |
| 20 | 00366700 | 2 | Hood Clip |
| 21 | 00372700 | 2 | Bracket, Hood Clip |
| 22 | 00454259 | 1 | Hood, Zoom |
| 23 | 00457859 | 1 | Foot Rest |
| 24 | 07500010 | 1 | Grommet, Rubber .38 I.D. |
| 25 | 06308600 | 2 | Washer, Locking .31 x .078 |
| 26 | 06216100 | 1 | Bolt, Round Head Square Neck .31-18 x 1.00 Grade 5 |
| 27 | 00457951 | 1 | Plate, Deck Access |
| 28 | 06223600 | 6 | Bolt, Round Head Square Neck .38-16 x 1.00 Grade 5 |
| 29 | 00458051 | 1 | Bracket, Deck Access |
| 30 | 06514900 | 1 | Nut, Push .312 |
| 31 | 07503100 | 2 | Grommet, Bumper |
| 32 | 07531700 | 1 | Knob, Wing .312-18 |
| 33 | 06542000 | 4 | Nut-Locking-Top-Flange .31-16 |
SEAT AND SEAT SUPPORT
Model 915075, 077, 079, 081, 083, 317, 318
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 00366300 | 1 | Seat w/Arm (075, 317) |
| 2 | 00367800 | 1 | Seat w/ Armrests (077, 079, 081, 083, 318) |
| 59205800 | AR | Armrest Kit (Fits 00367800) | |
| 3 | 00440651 | 1 | Seat Plate |
| 4 | 00360151 | 1 | Seat Support |
| 5 | 00174151 | 1 | Bracket, Seat Plate |
| 6 | 07056700 | 2 | Bolt, Shoulder .375-16 x .135 |
| 7 | 06545500 | 7 | Nut .38-16 Flange Nyloc |
| 8 | 06223600 | 7 | Bolt, Round Head Square Neck .38-16 x 1.00 Grade 5 |
| 9 | 00456600 | 1 | Hour Meter, LCD (077, 079, 081, 083, 317, 318) |
| 00539300 | 1 | Plug, Headlight Switch (075) | |
| 10 | 07531700 | 1 | Knob, Wing .312-18 (075, 077, 079, 081, 083) |
| 11 | 06530200 | 1 | Nut, Locking Nylon .312-18 (317, 318) |
| 12 | 06308600 | 4 | Washer-Locking .31 x .078 Regular |
| 13 | 06446900 | 2 | Washer-Flat-Steel .347 x 1.254 x .048 |
| 14 | 06542000 | 2 | Nut-Locking-Top-Flange .38-16 |
| 15 | 00337700 | 2 | Hub Cap |
| 16 | 05946900 | 2 | Bolt-Hex .31-18 x 1.00 Grade 5 |
| 17 | 06437500 | 3 | Washer-Flat-Steel .328 x 1.0 x .094 (075, 077, 079, 081, 083) |
| 06437500 | 4 | Washer-Flat-Steel .328 x 1.0 x .094 (317, 318) | |
| 18 | 08300021 | 2 | Spring, Seat |
| 19 | 06545400 | 9 | Nut .312-18 Flange Nyloc (077, 079, 081, 083, 318) |
| 06545400 | 5 | Nut .312-18 Flange Nyloc (075, 317) | |
| 20 | 06530400 | 1 | Nut-Spin Lock-Flange .312-18 |
| 21 | 06439200 | 1 | Washer-Flat-Steel .505 x 1.00 x .062 |
| 22 | 06212300 | 1 | Bolt-Round Head Square Neck .31-18 x 2.75 Grade 5 |
| 23 | 00362151 | 1 | Brake Rod Support |
| 24 | 06216100 | 2 | Bolt, Round Head Square Neck .31-18 x 1.00 |
| 25 | 07506500 | 2 | Grommet |
| 26 | 03679000 | 1 | Solenoid |
| 27 | 07411600 | 2 | Screw, Tapping .250-20 x .37 |
| 28 | 00379700 | 1 | Weldment, Park Brake |
| 29 | 05525200 | 2 | Bushing, Flange .762 x 1.48 x .44 |
| 30 | 09235400 | 1 | Spacer .328 x .76 x 1.01 |
| 31 | 05957400 | 5 | Bolt, Hex .31-18 x 1.75 Grade 5 |
| 32 | 00379400 | 1 | Bracket, Brake Handle Pivot |
| 33 | 06219900 | 2 | Bolt, Round Head Square Neck .25-20 x .75 Grade 5 |
| 34 | 06543500 | 2 | Nut, Locking Top Flange .25-20 |
| 35 | 00380800 | 1 | Grip |
| 36 | 06439100 | 4 | Washer, Flat Steel .328 x .87 x .179 (075, 317) |
| 37 | 00479051 | 2 | Spacer, Seat (075, 317) |
| 38 | 07533000 | 1 | Bumper, Rubber (077, 079, 081, 083, 318) |
| 39 | 06534600 | 1 | Nut, Spinlock Flange Nut, .312-24 (077, 079, 081, 083, 318) |
| 40 | 00166800 | 4 | Caplug, Square 1-14-20 (075, 317) |
FRONT AXLE, TIRES AND BUMPER
Model 915079, 081, 083, 317, 318
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 01600851 | 1 | Weldment, Front Axle |
| 2 | 00482151 | 1 | Bumper, Zoom |
| 3 | 00469351 | 2 | Fork, Caster |
| 4 | 01588100 | 2 | Assembly, Tire 4 x 11- 4 Ply |
| 5 | 05533600 | 4 | Bushing, Flange 1.00 x 1.25 x 1.50 x 1.50 |
| 6 | 00278500 | 2 | Spacer, Rolled Wheel |
| 7 | 05964400 | 2 | Bolt, Hex .50-13 x 6.50 Grade 5 |
| 8 | 01600400 | 1 | Bushing, Axle Pivot |
| 9 | 05930700 | 3 | Bolt-Hex .62-11X2.25 Grade 8 |
| 10 | 06543600 | 4 | Nut, Locking Top Flange .50-13 |
| 11 | 05962200 | 2 | Bolt, Hex .50-13 x 5.00 Grade 5 |
| 12 | 06436400 | 2 | Washer, Flat Steel .511 x 1.441 x .125 |
| 13 | 06435200 | 5 | Washer, Flat .64 x 1.81 x .25 |
| 14 | 06223600 | 4 | Bolt, Round Head Square Neck .38-16 x 1.00 Grade 5 |
| 15 | 06545500 | 4 | Nut .38-16 Flange Nyloc |
| 16 | 06540700 | 3 | Nut, Locking Nylon .625-11 |
| 17 | 06442900 | 1 | Washer, Flat Steel .688 x 1.75 x .134 |
| 18 | 00271800 | 2 | Spacer, .750 D x .558 Long |
| 19 | 00363100 | 4 | Spacer, Caster |
TRANSAXLE, DUMP VALVES AND REAR WHEELS
Model 915075, 077, 079, 081, 083, 317, 318
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 01578051 | 1 | Bracket, Transmission Axle Support |
| 2 | 01578151 | 1 | Weldment, Transmission Axle Brace |
| 3 | 00386300 | 1 | Transaxle, Left Hand |
| 51514300 | NS | Brake Arm Kit, Left Hand Transaxle | |
| 4 | 00386200 | 1 | Transaxle, Right Hand |
| 51514200 | NS | Brake Arm Kit, Right Hand Transaxle | |
| 5 | 01581600 | 2 | Rod, Dump IZT |
| 6 | 07515900 | 2 | Knob |
| 7 | 06713500 | 2 | Pin, Hair |
| 8 | 01587800 | 2 | Assembly, Tire 9.5 x 18-2 Ply (079, 081, 083, 318) |
| 01588700 | 2 | Assembly, Tire 8.5 x 18-2 Ply (075, 077, 317) | |
| 9 | 01578200 | 1 | Rod, Axle Brace |
| 10 | 06535000 | 8 | Nut, Lug .50-20 |
| 11 | 06545500 | 1 | Nut, .38-16 Flange Nyloc |
| 12 | 01568600 | 2 | Rod Pivot |
| 13 | 05952600 | 2 | Bolt, Hex .31-18 x 2.50 Grade 5 |
| 14 | 06308600 | 2 | Washer, Locking .31 x .078 Regular |
| 15 | 06545400 | 2 | Nut .312-18 Flange Nyloc |
| 16 | 06536100 | 4 | Nut, Jam .312-18 |
| 17 | 03622900 | 1 | Shoulder Stud |
| 18 | 06439100 | 2 | Washer, Flat Steel .38 x .87 x .179 |
| 19 | 00929200 | AR | Adhesive Sealant |
| 20 | 06545400 | 12 | Nut-.31-18 Flange Nyloc |
| 21 | 05960600 | 12 | Bolt-Hex .31-18 x 2.75 Grade 5 |
PARKING BRAKE
Model 915075, 077, 079, 081, 083, 317, 318
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 00361200 | 1 | Weldment, Brake Rod |
| 2 | 05517400 | 2 | Bushing, Flange .63 x 1.00 x .625 Nylon |
| 3 | 06714500 | 2 | Pin, Spring Clip |
| 4 | 00379800 | 1 | Clevis Weldment |
| 5 | 00183700 | 1 | Bracket, Brake Switch |
| 6 | 07415800 | 4 | Screw, Tapping 10-24 x .50 Hex Washer Head |
| 7 | 01589200 | 2 | Rod, Over Center |
| 8 | 06714800 | 6 | Pin, Hair |
| 9 | 03606600 | 1 | Switch, Double Pole N.O./N.O. |
| 10 | 00425300 | 2 | Rod, Park Brake IZT |
| 11 | 06444000 | 2 | Washer, Flat Steel .406 x 1.00 x .188 |
| 12 | 06437200 | 6 | Washer, Flat Steel .344 x .688 x .065 |
| 13 | 08300028 | 2 | Spring, Compression .063 x .53 x 1.187 |
| 14 | 06530200 | 2 | Nut, Locking Nylon .312-18 |
| 15 | 06436200 | 2 | Washer, Flat Steel .406 x .812 x .065 |
| 16 | 06408900 | 2 | Washer, Flat Steel .627 x .99 x .032 |
| 17 | 06810200 | 1 | Pin, Clevis .037 x 1.50 |
| 18 | 06811900 | 1 | Pin, Clevis .375 x .948 |
STEERING CONTROLS
Model 915075, 077, 079, 081, 083, 317, 318 
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 01533400 | 1 | Battery Rod |
| 2 | 01554800 | 1 | Battery (12 Volt, 330 CCA, 50 Min. Reserve Cap.) |
| 3 | 00361751 | 2 | Control Arm |
| 4 | 00362651 | 2 | Channel, Handlebar Adjustment |
| 5 | 01581700 | 2 | Spacer |
| 6 | 00372300 | 2 | Eccentric |
| 7 | 03461700 | 2 | Rod End, .50 Right Hand |
| 8 | 01569600 | 2 | Rod, Transaxle Left Hand |
| 9 | 00362851 | 2 | Handlebar |
| 10 | 01570000 | 2 | Grip, Handlebar |
| 11 | 00188700 | 2 | Damper |
| 12 | 06539500 | 4 | Nut, Jam .50-20 Grade 2 |
| 13 | 06543600 | 3 | Nut, Locking Top Flange .50-13 |
| 14 | 05959900 | 2 | Bolt, Hex .50-13 x 3.00 Grade 5 |
| 15 | 05970600 | 1 | Bolt, Hex .50-13 x 1.75 Grade 5 |
| 16 | 06223600 | 6 | Bolt, Round Head Square Neck .38-16 x 1.00 Grade 5 |
| 17 | 06545500 | 6 | Nut .38-16 Flange Nyloc |
| 18 | 06537500 | 1 | Nut, Locking Wing .25-20 |
| 19 | 06544000 | 2 | Nut, Jam Nyloc .50-20 Grade 2 |
| 20 | 07533300 | 2 | Caplug, Handlebar |
| 21 | 00359700 | 1 | Weldment, Control LH |
| 22 | 00359800 | 1 | Weldment, Control RH |
| 23 | 00383200 | 2 | Bracket, Neutral Stop |
| 24 | 00359900 | 2 | Spacer, Neutral Stop |
| 25 | 05435800 | 4 | Bearing, 1.00 x 1.12 x .75 |
| 26 | 00365100 | 2 | Link, Brake Rod |
| 27 | 03563100 | 2 | Rod, End .38 RH |
| 28 | 00371951 | 2 | Weldment, Steering Control |
| 29 | 06500007 | 4 | Nut, Locking Top Flange 8 x 1.25 |
| 30 | 05957400 | 6 | Bolt, Hex .31-18 x 1.75 Grade 5 |
| 31 | 06545400 | 8 | Nut, .312-18 Flange Nyloc |
| 32 | 06220200 | 4 | Bolt, Round Head Square Neck .31-18 x 1.75 Grade 5 |
| 33 | 06543100 | 4 | Nut, Locking Top Flange .31-18 |
| 34 | 05964700 | 2 | Bolt, Hex .25-20 x 1.75 Grade 5 |
| 35 | 06531000 | 2 | Nut, Locking Nylon .250-20 |
| 36 | 05513400 | 2 | Bushing, Flange .265 x .437 x .250 x .750 |
| 37 | 05947500 | 2 | Bolt, Hex .31-18 x 1.25 Grade 5 |
| 38 | 05959400 | 2 | Bolt, Hex .38-16 x .75 Grade 5 |
| 39 | 00166800 | 4 | Caplug, Square |
| 40 | 06713500 | 2 | Pin, Hair .08 x .18 x 1.18 |
| 41 | 05900016 | 4 | Screw, Cap .38-16 x 2 |
| 42 | 00470600 | 1 | Steering Linkage |
| 43 | 05958900 | 1 | Bolt, Hex .50-13 x 1.25 Grade 5 |
| 44 | 05947100 | 1 | Bolt, Hex .50-13 x 1.00 Grade 5 |
| 45 | 06306600 | 3 | Washer, Lock .50 x .151 |
FUEL TANK
Model 915075, 077, 079, 081, 083, 317, 318
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 01614100 | 1 | Tank, Fuel – Right Hand |
| 2 | 01538400 | 2 | Fuel Cap |
| 3 | 00296751 | 1 | Seat Plate Right Hand |
| 4 | 01614551 | 1 | Right Hand Console |
| 5 | 01588400 | 1 | Choke Cable (079, 081, 083) |
| 06942300 | 1 | Choke Cable (317, 318) | |
| 00529900 | 1 | Hole Plug, Plastic .44 Hole (075, 077) | |
| 6 | 01588500 | 1 | Throttle Cable (317, 318) |
| 00369200 | 1 | Throttle Cable (079, 081, 083) | |
| 00355100 | 1 | Throttle Cable (075, 077) | |
| 7 | 01545600 | 1 | Switch, Clutch |
| 8 | 01588300 | 1 | Key Switch |
| 9 | 02460700 | 1 | Key with Cap |
| 10 | 00924300 | 1 | Gas Line, Bulk .25 I.D. x 34 in. Long |
| 11 | 00924300 | 1 | Gas Line, Bulk .25 I.D. x 44 in. Long |
| 12 | 00924300 | 1 | Gas Line, Bulk .25 I.D. x 23 in. Long |
| 00924300 | 1 | Gas Line, Bulk .25 I.D. x 34 in. Long (317, 318) | |
| 13 | 09258200 | 1 | Valve, Fuel |
| 14 | 06939100 | 6 | Clamp, Hose Wire .490/.510 x .116 |
| 15 | 00296851 | 1 | Seat Plate Left Hand |
| 16 | 01614000 | 1 | Tank, Fuel – Left Hand |
| 17 | 06223600 | 8 | Bolt, Round Head Square Neck .38-16 x 1.00 Grade 5 |
| 18 | 07049600 | 8 | Bolt, Serrated Hex Flange Washer Head .312-18 x .75 |
| 19 | 06545500 | 8 | Nut .38-16 Flange Nyloc |
| 20 | 06536000 | 3 | Nut-Locking-Nylon 10-24 with Insert |
| 21 | 06100003 | 4 | Screw, Machine 10-24 x .38 Slotted Hex |
| 22 | 00548400 | 8 | Retainer .38 Push-On |
| 23 | 06437500 | 12 | Washer, Flat Steel .328 x 1.00 x .094 |
| 24 | 00289200 | 1 | Shim, PTO Switch |
| 25 | 01614451 | 1 | Console, Left Hand |
| 26 | 01528500 | 1 | Cup Holder |
| 27 | 06400004 | 8 | Washer, Fender 3/16 x 3/4 |
| 28 | 06116700 | 3 | Screw-Machine 10-24 x .50 Hex Washer Head |
| 29 | 00470200 | 2 | Cable Tie |
| 30 | 00390100 | 3 | Wire Clip |
ENGINE, EXHAUST, BELTS AND IDLERS
Model 915075, 077, 079, 081, 083, 317, 318 
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 08200103 | 1 | Engine, 16hp Kohler (075) |
| 08200104 | 1 | Engine, 18hp Kohler (077) | |
| 08200105 | 1 | Engine, 20hp Kohler (079 s/n 025000 and up) | |
| 08200106 | 1 | Engine, 23hp Kohler (081 s/n 025000 and up) | |
| 08200107 | 1 | Engine, 25hp Kohler (083) | |
| 08200013 | 1 | Engine, 15hp Kawasaki (318) | |
| 08200012 | 1 | Engine, 17hp Kawasaki (317) | |
| 2 | 00191700 | 1 | Clutch, Electric (077, 079, 081, 083, 318) |
| 03643100 | 1 | Clutch, Electric (075, 317) | |
| 3 | 06604300 | 1 | Key, Square .25 x 1.50 x .25 SAE 8630 OR SAE 1035 |
| 4 | 00363751 | 1 | Clutch Stop |
| 5 | 00363200 | 1 | Extension Shaft |
| 6 | 07241400 | 1 | V-Belt |
| 7 | 00473500 | 1 | Weldment, Idler |
| 8 | 05500039 | 2 | Bushing, Flange .075 x .0875 x .625 x 1.125 |
| 9 | 05516400 | 1 | Bushing, Sleeve .50 x .75 x 1.56 |
| 10 | 07312500 | 2 | Pulley, Idler 4.00 |
| 11 | 00186400 | 1 | Spacer |
| 12 | 08336100 | 1 | Spring, Extension |
| 13 | 05966700 | 1 | Bolt, Hex .44-20 x 4.50 Grade 8 |
| 14 | 06309300 | 1 | Washer, Locking .44 x .109 Regular |
| 15 | 06443600 | 1 | Washer, Flat Steel .469 x 2.00 x .25 |
| 16 | 05966600 | 1 | Bolt-Hex .50-13 x 2.50 Grade 5 |
| 17 | 06543600 | 1 | Nut, Locking Top Flange .50-13 |
| 18 | 06224300 | 1 | Bolt-Round Head Square Neck .38-16 x 2.00 Grade 5 |
| 19 | 06224100 | 1 | Bolt-Round Head Square Neck .38-16 x 1.25 Grade 5 |
| 20 | 05948700 | 1 | Bolt-Hex .38-16 x 1.00 Grade 5 |
| 21 | 00276651 | 1 | Heat Shield (079, 081, 083) |
| 22 | 07414100 | 1 | Screw-Tapping .38-16 x 1.00 Hex Washer Head Thread Rolling YZ |
(075, 077)
| 05957400| 1| Bolt-Hex .31-18 x 1.75 Grade 5 (317, 318)
| 05948700| 1| Bolt-Hex .38-16 x 1.00 Grade 5 (079, 081, 083)
23| 06545400| 4| Nut .31-18 Flange Nyloc (317, 318)
24| 00595900| 1| Tube, Oil Drain
| 00191400| 1| Tube Oil Drain (317, 318)
25| 09298000| 1| Muffler, Exhaust (317, 318)
26| 06537200| 2| Nut, Locking, Jam, Center .375-16
27| 07412000| 3| Screw, Tapping .25-20 x .50 Hex Washer Head (075, 077)
28| 00391700| 1| Muffler (079, 081, 083)
29| 06545500| 4| Nut-.38-16 Flange Nyloc (079, 081, 083)
| 06545500| 1| Nut-.38-16 Flange Nyloc (075, 077, 317, 318)
30| 00435100| 1| Muffler (075, 077)
31| 00255400| 1| Muffler Clamp (075, 077)
32| 00253900| 1| Weldment, Manifold (075, 077)
33| 00432000| 1| Muffler Bracket (075, 077)
34| 06308600| 1| Washer-Locking .31 x .078 Regular (317, 318)
35| 06538600| 1| Nut-Hex M8-1.25 (317, 318)
36| 00396251| 1| Heat Shield (317, 318)
37| 07411500| 4| Screw, Tapping .31-18 x .50 (317, 318)
38| 06437500| 4| Washer, Flat Steel .328 x 1.0 x .094 (317, 318)
39| 07414100| 3| Screw, Tapping .38-16 x 1.00 Hex Washer Head Thread Rolling
YZ (075, 077)
| 07414100| 4| Screw, Tapping .38-16 x 1.00 Hex Washer Head Thread Rolling YZ
(079, 081, 083)
| 05957400| 3| Bolt-Hex .31-18 x 1.75 Grade 5 (317, 318)
40| 07517300| 1| Cable Tie, 5.5 Long (317, 318)
ELECTRICAL SYSTEM
Model 915075, 077, 079, 081, 083, 317, 318
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 02460700 | 1 | Key with Cap |
| 2 | 00432100 | 3 | Relay |
| 3 | 09351100 | 2 | Fuse, 25 AMP |
| 4 | 01588300 | 1 | Key Switch |
| 5 | 03679000 | 1 | Solenoid (075, 077, 083, 317, 318) |
| 6 | 07415800 | 2 | Screw, Tapping 10- 24 x .50 Hex Washer Head |
| 7 | 01554800 | 1 | Battery, Filled (075, 077, 079, 081, 083, 317, 318) |
| 8 | 05946800 | 2 | Bolt, Hex .25-20 x .75 Grade 5 |
| 9 | 06437300 | 2 | Washer, Flat Steel .281 x .62 x .065 |
| 10 | 06308400 | 2 | Washer, Locking .25 x .062 Regular |
| 11 | 06533200 | 2 | Nut, Hex .25-20 |
| 12 | 07533200 | 3 | Boot, Eyelet Terminal (915075, 077, 079, 081, 083, 317, 318) |
| 13 | 00145900 | 1 | Starter Cable 6.75” (915075, 077, 079, 081, 083, 317, 318) |
| 14 | 02727900 | 1 | Starter Cable 16″ (915075, 077, 079, 081, 083, 317, 318) |
| 15 | 03111100 | 1 | Ground Cable |
| 16 | 01545600 | 1 | Switch, Clutch With Retainer |
| 17 | 00363400 | 1 | Wire Harness, Zoom |
| 00472800 | 1 | Wire Harness, Zoom CE (317, 318) | |
| 18 | 02754100 | 1 | Switch, Snap Mounting (N.O.) |
| 19 | 09293500 | 2 | Diode, Connector Shell |
| 20 | 07505700 | 1 | Insulator |
| 21 | 00580600 | 1 | Fuse, 20 AMP |
| 22 | 06310500 | 4 | Washer, Locking .31 (915075, 077, 079, 081, 083, 317, 318) |
| 23 | 06536700 | 2 | Nut, Jam .31-24 (915075, 077, 079, 081, 083, 317, 318) |
| 24 | 07517300 | 1 | Cable Tie |
| 25 | 03606600 | 1 | Switch, Double Pole N.O./N.O. (075, 077, 079, 081, 083) |
| 03657100 | 1 | Switch, Single Pole N.O. (317, 318) | |
| 26 | 04935700 | 1 | Hour Meter |
| 27 | 00289200 | 1 | Shim, PTO Switch |
| 28 | 06116700 | 3 | Screw,Machine 10-24 x .50 Slotted Hex |
| 29 | 06536000 | 3 | Nut-Locking-Nylon 10-24 with Insert |
| 30 | 07506500 | 1 | Grommet .125 x 1.000 ID |
| 31 | 00382600 | 1 | Bracket, Relay |
CONTINUITY DIAGRAM
Model 915075, 077, 079, 081, 083, 317, 318
The diagrams below show the various states of connection for electrical
components.
The solid lines on switches show continuity.
NOTE: All switches are viewed from the rear.
WIRING DIAGRAM
Model 915075, 077, 079, 081, 083
Model 915317, 318
DECK LIFT
Model 915075, 077, 079, 081, 083, 317, 318
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 00270400 | 2 | Rod, Lift |
| 2 | 00186200 | 1 | Weldment, Front Lift |
| 3 | 00178700 | 1 | Bushing, Front |
| 4 | 05503500 | 6 | Bushing-Flange 1.00 x 1.12 x .62 x 1.50 Bronze |
| 5 | 05961400 | 1 | Bolt, Hex .38-16 x 2.75 |
| 6 | 06545500 | 1 | Nut, .38-16 Flange Nyloc |
| 7 | 01591800 | 2 | Bushing, Rear |
| 8 | 01591700 | 1 | Weldment, Lift, Rear Right Hand |
| 9 | 01591600 | 1 | Weldment, Lift, Rear Left Hand |
| 10 | 00161600 | 1 | Weldment, Foot Pedal |
| 11 | 06441900 | 4 | Washer-Flat-Steel .531 x 1.06 x .095 |
| 12 | 05963300 | 1 | Bolt, Hex .38-16 x 2.00 Grade 5 |
| 13 | 06545500 | 1 | Nut .38-16 Flange Nyloc |
| 14 | 06714900 | 4 | Pin, Hair External |
| 15 | 05716800 | 2 | Ring, Retaining .82 x 1.50 x .05 |
| 16 | 01593500 | 1 | Pin, Spring Ball .375 O.D. x 1.50 |
| 17 | 00165100 | 1 | Rod, Lift |
| 18 | 07411600 | 1 | Screw-Tapping .250-20 x .37 Hex Washer Head |
| 19 | 06927100 | 1 | Hood Cable |
| 20 | 00165000 | 1 | Tube, Lift Stop |
| 21 | 00182500 | 2 | Spacer, Rear Lift |
MOWER DECK, BELT, IDLERS AND BLADES
Model 915075, 077, 079, 081, 083, 317, 318 Serial Number 025000 & up
| **Item** | **Part No.** | **Qty.** | Description |
|---|---|---|---|
| 1 | 00428951 | 1 | 40″ Mower Deck (915075, 077, 317) |
| 00440351 | 1 | 44″ Mower Deck (079, 318) | |
| 00440451 | 1 | 48″ Mower Deck (081) | |
| 00440551 | 1 | 52″ Mower Deck (083) | |
| 2 | 00429551 | 1 | Plate, 40” Doubler (915075, 077, 317) |
| 3 | 01520100 | 2 | Cover |
Model 915075, 077, 079, 081, 083, 317, 318 Serial Number 025000 & up
| 4 07200037 | 1 | V-Belt (075, 317) |
|---|---|---|
| 07219600 | 1 | V-Belt (077) |
| 07242900 | 1 | V-Belt (079, 318) |
| 07200022 | 1 | V-Belt (081) |
| 07200023 | 1 | V-Belt (083) |
| 5 06545500 | 22 | Nut .38-16 Flange Nyloc |
| 6 06224100 | 4 | Bolt, Round Head Square Neck .38-16 x 1.25 Grade 5 |
| 7 07300006 | 2 | Idler, Flat .38 x 4.00 x 1.06 |
| 8 00429900 | 1 | Weldment, Idler Arm |
| 9 01581700 | 1 | Spacer, Powdered Metal |
| 10 07327100 | 1 | Pulley, Idler 4.00 |
| 11 01593800 | 3 | Sheave, Spindle 4.00 Dia. (075, 317) |
| 01599400 | 3 | Sheave, Spindle 4.25 Dia. (077) |
| 01599500 | 3 | Sheave, Spindle 4.50 Diameter (079, 318) |
| 01610400 | 3 | Sheave, Spindle 4.25 Diameter (081) |
| 01610300 | 3 | Sheave, Spindle 4.75 Diameter (083) |
| 12 51510000 | 3 | Assembly, Spindle |
| 13 06400006 | 3 | Washer, Flat Steel .406 x 1.50 x .245 |
| 14 06445700 | 3 | Washer, Bellville .63 x 1.625 x .140 |
| 15 05978900 | 3 | Bolt, Hex .62-18 x 1.75 Grade 8 |
| 16 06225000 | 1 | Bolt, Round Head Square Neck .50-13 x 3.50 Grade 5 |
| 17 06435200 | 3 | Washer, Flat .64 x 1.81 x .25 |
| 18 03498400 | 3 | Blade, Mower (13.88) (075, 077) |
| 01593900 | 3 | Blade, Mower (15.50) (079) |
| 04919100 | 3 | Blade, Mower (16.25) (081) |
| 04916400 | 3 | Blade, Mower (18.00) (083) |
| 00272900 | 3 | Blade, Mulch 15.50″ (318) |
| 00272800 | 3 | Blade, Mulch 13.88” (317) |
| 19 05974500 | 3 | Bolt, Hex .38-16 x 1.00 Grade 8 with Epoxy Patch |
| 20 06611100 | 3 | Key, Square .25 x .38 x .25 |
| 21 06224200 | 12 | Bolt, Round Head Square Neck .38-16 x 1.50 |
| 22 06543600 | 1 | Nut, Locking Top Flange .50-13 |
| 23 05435800 | 2 | Bearing, 1.00 x 1.12 x .75 |
| 24 06220500 | 2 | Bolt, Round Head Square Neck .38-16 x 2.00 Grade 5 |
| 25 06228100 | 1 | Bolt, Round Head Square Neck .38-16 x 3.00 Grade 5 |
| 26 06441500 | 4 | Washer, Flat Steel .755 x 1.375 x .062 |
| 27 08300020 | 1 | Spring, Extension |
| 28 06442000 | 2 | Washer, Flat Steel .563 x 1.38 x .109 |
| 29 06445000 | 3 | Washer, Flat Steel .515 x 1.625 x .25 |
| 30 00391900 | 1 | Finger, Belt |
| 31 06444000 | 1 | Washer, Flat Steel .406 x 1.00 x .188 |
| 32 06542000 | 1 | Nut, Locking Top Flange .38-16 |
| 33 05515800 | 2 | Bushing, Sleeve .752 x .877 x .75 Bronze |
| 34 06543900 | 1 | Nut, Spiral Lock Flange .50-13 |
| 35 05959700 | 1 | Bolt, Hex .50-13 x 2.00 Grade 5 |
| 36 06537300 | 1 | Nut, Hex .50-13 |
| 37 06500013 | 1 | Coupling .50-13 x 1.75 |
| 38 06224700 | 1 | Bolt, Round Head Square Neck .50-13 x 1.25 Grade 5 |
| 39 06225400 | 2 | Bolt, Round Head Square Neck .38-16 x 2.75 Grade 5 |
| 40 00587400 | 3 | Cap, Dust |
BAFFLES AND CHUTE
Model 915075, 077, 079, 081, 083 
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 01585500 | 1 | Deflector, Chute |
| 2 | 02709551 | 1 | Hinge, Plate |
| 3 | 06219900 | 2 | Bolt, Round Head Square Neck .25-20 x .75 Grade 5 |
| 4 | 06713500 | 1 | Pin, Internal .08 x .18 x 1.18 |
| 5 | 08307200 | 1 | Spring, Torsion .095 x .50 x 1.00 |
| 6 | 02202900 | 1 | Bushing, Sleeve |
| 7 | 00475800 | 1 | Pin, Clevis |
| 8 | 07049600 | 6 | Bolt, Serrated Hex Flange Washer Head .31-18 x .75 |
| 9 | 06220800 | 5 | Bolt, Round Head Square Neck .31-18 x .75 |
| 10 | 06545400 | 11 | Nut-.312-18 Flange Nyloc |
| 11 | 01576151 | 1 | Weldment, Upper Left Baffle-40″ (075, 077) |
| 01572451 | 1 | Weldment, Upper Left Baffle-44″ (079) | |
| 01574051 | 1 | Weldment, Upper Left Baffle-48″ (081) | |
| 01575051 | 1 | Weldment, Upper Left Baffle-52″ (083) | |
| 12 | 01576251 | 1 | Weldment, Upper Center Baffle-40″ (075, 077) |
| 01572551 | 1 | Weldment, Upper Center Baffle-44″ (079) | |
| 01574151 | 1 | Weldment, Upper Center Baffle-48″ (081) | |
| 01575151 | 1 | Weldment, Upper Center Baffle-52″ (083) | |
| 13 | 01576351 | 1 | Weldment, Upper Right Baffle-40″ (075, 077) |
| 01572651 | 1 | Weldment, Upper Right Baffle-44″ (079) | |
| 01574251 | 1 | Weldment, Upper Right Baffle-48″ (081) | |
| 01575251 | 1 | Weldment, Upper Right Baffle-52″ (083) | |
| 14 | 01576751 | 1 | Deflector, 40″ (075, 077) |
| 01574651 | 1 | Deflector, 44″/48″ (079, 081) | |
| 01575951 | 1 | Deflector, 52″ (083) | |
| 15 | 01597751 | 1 | Flat Spring |
| 16 | 06543500 | 4 | Nut, Locking Top Flange .25-20 |
| 17 | 06220600 | 2 | Bolt, Round Head Square Neck .25-20 x .50 Grade 5 |
| 18 | 06223600 | 1 | Bolt, Round Head Square Neck .38-16 x 1.00 Grade 5 |
| 19 | 06545500 | 2 | Nut, Flange Nyloc .375-18 |
| 20 | 01599151 | 1 | Bracket, Chute Lock |
| 21 | 06224200 | 1 | Bolt, Round Head Square Neck .38-16 x 1.50 |
Model 915317, 318
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 00424951 | 1 | Block-Off Plate |
| 2 | 07049600 | 6 | Bolt, Serrated Hex Flange Washer Head .31-18 x .75 |
| 3 | 06220800 | 5 | Bolt, Round Head Square Neck .31-18 x .75 |
| 4 | 06545400 | 13 | Nut-.312-18 Flange Nyloc |
| 5 | 01576651 | 1 | Baffle, Mulch, Right Front-40″ (317) |
| 01573251 | 1 | Baffle, Mulch, Right Front-44″ (318) | |
| 6 | 01576551 | 1 | Baffle, Mulch, Center Front-40″ (317) |
| 01573151 | 1 | Baffle, Mulch, Center Front-44″ (318) | |
| 7 | 01576451 | 1 | Baffle, Mulch, Left Front-40″ (317) |
| 01573051 | 1 | Baffle, Mulch, Left Front-44″ (318) |
HANDLE AND STABILIZER BRACKETS
Model 915075, 077, 079, 081, 083, 317, 318
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 00160000 | 4 | Deck Link |
| 2 | 06545500 | 12 | Nut .38-16 Flange Nyloc |
| 3 | 01590251 | 2 | Bracket, Mount, Front |
| 4 | 01604551 | 2 | Bracket, Rear Mount |
| 5 | 00451151 | 2 | Bracket, Stabilizer (915075, 077, 079, 081, 083, 317, 318) |
| 6 | 01590400 | 4 | Trunnion |
| 7 | 06223600 | 12 | Bolt, Round Head Square Neck .38-16 x 1.00 Grade 5 |
| 8 | 06714900 | 6 | Pin, Hair, External |
| 9 | 06436400 | 6 | Washer-Flat Steel .511 x 1.441 x .125 |
| 10 | 00270200 | 2 | Rod, Drag Link |
NOTES
MOWER BRACKETS AND ROLLERS
Model 915075, 077, 079, 081, 083, 317, 318 
MOWER BRACKETS AND ROLLERS
Model 915075, 077, 079, 081, 083, 317, 318
| Item | Part No. | Qty. | Description |
|---|---|---|---|
| 1 | 01574851 | 2 | Bracket, Anti-Scalp ( 079, 081, 083, 318) |
| 00344151 | 2 | Bracket, Anti-Scalp (077) | |
| 2 | 03471700 | 2 | Wheel 5 x 3 ( 079, 081, 083, 318) |
| 02745400 | 2 | Roller (077) | |
| 3 | 07056800 | 2 | Bolt, Shoulder .38-16 x 2.50 Hex Washer Head Grade 5 (079, |
081, 083, 318)
| 05960900| 2| Bolt, Shoulder .38-16 x 3.50 Hex Washer Head Grade 5 (077)
4| 06545500| 13| Nut .38-16 Flange Nyloc (077, 079, 081, 083, 318)
| 06545500| 2| Nut .38-16 Flange Nyloc (075, 317)
5| 06223600| 13| Bolt-Round Head Square Neck .38-16 x 1.00 Grade 5 (077, 079,
081, 083, 318)
| 06223600| 2| Bolt- Round Head Square Neck .38-16 x 1.00 Grade 5 (075, 317)
6| 00355651| 2| Bracket, Roller Mount (077, 079, 081, 083, 318)
| 00355651| 1| Bracket, Roller Mount (075, 317)
7| 03114100| 2| Roller (077, 079, 081, 083, 318)
| 03114100| 1| Roller (075, 317)
8| 00356500| 2| Pin, Roller (077, 079, 081, 083, 318)
| 00356500| 1| Pin, Roller (075, 317)
9| 06714500| 2| Pin, Spring Clip (077, 079, 081, 083, 318)
| 06714500| 1| Pin, Spring Clip (075, 317)
10| 01577451| 1| Bar, Left Hand Retainer Striper (077, 079, 081, 083, 318)
11| 01577651| 1| Bar, Retaining Striper (079, 318)
| 01577351| 1| Bar, Retaining Striper (081, 083)
| 01576951| 1| Bar, Retaining Striper (077)
12| 01577500| 1| Striper, Rubber-44″ (079, 318)
| 01577000| 1| Striper, Rubber-48″ (081)
| 01577200| 1| Striper, Rubber-52″ (083)
| 01576800| 1| Striper, Rubber-40″ (077)
13| 06542000| 2| Nut-Locking-Top-Flange .38-16 (077, 079, 081, 083, 318)
14| 06436200| 4| Washer, Flat Steel .406 x .812 x .065 (077)
15| 06537200| 2| Nut, Center Lock Jam .375-16 (077)
Ariens Company
655 West Ryan Street
P. O . B o x 1 5 7
Brillion, WI 54110-0157
920-756-2141
Fax 920-756-2407
www.ariens.com
https://manual-hub.com/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>