Haier Series 5 Multi Beverage User Manual

: June 17, 2024
: Haier

Table of Contents

Haier Series 5 Multi Beverage
INSTRUCTIONS FOR SAFE USE
Getting to know your Multi Beverage
Before first use
Using your Multi Beverage
Cleaning & Maintenance
Troubleshooting
Technical data
Important information
Recipe table
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Haier Series 5 Multi Beverage

https://go.he.services/haier-um

INSTRUCTIONS FOR SAFE USE

This appliance is intended for domestic use only as described in this user guide. Please ensure that this guide is fully understood before operating the appliance. This appliance can be used by children aged 8 years and above and by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards involved. Keep children under 8 years of age away from the appliance and connecting cable and do not allow them to use the appliance. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 years and supervised. Only use the appliance indoors and at altitudes not exceeding 2,000 m above sea level. If the power cord is damaged stop using the appliance immediately. To avoid a safety hazard, an authorized Haier service engineer must replace the power cord. Use only attachments, consumables, or spares recommended or supplied by Haier. Only use the appliance by the power specification on the rating plate. This appliance is intended to be used in household and similar applications such as:

Staff kitchen areas in shops, offices, and other working environments;
Farm houses;
By clients in hotels, motels, and other residential-type environments;
Bed and breakfast type environments.

The appliance is only to be used with the base provided.

CAUTION: Never fill the container above the maximum level since hot foaming coffee or other liquids (e.g. milk) might overflow during heating.
WARNING Avoid spillage on the connector. Never immerse the appliance.

The Environment
The symbol on this appliance indicates that this appliance may not be treated as household waste. Instead, it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about the treatment, recovery, and recycling of this appliance, please contact your local city office, your household and waste disposal service or the shop where you purchased the appliance.

This appliance complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU. CANDY HOOVER GROUP S.r.l. Via Comolli,16 20861 Brugherio (MB) Italy

Getting to know your Multi Beverage

COMPONENTS & FEATURES

Haier-Series-5-Multi-Beverage-FIG-1

A. Main product
B. User interface
C. Jug
D. Frother
E. Level indicator
F. Metal filter
G. Cleaning brush
H. Coffee Spoon
I. Drain hole

Before first use

Remove all parts and accessories from the package and read this manual carefully.
Pay attention to safety instructions, warnings and important notes to prevent any injury or damage.
Release the required amount of cable from the cable tidy and plug the appliance into a socket.
Before you use the appliance and accessories for the first time, thoroughly clean the parts that contact with food. Before you clean the appliance, unplug it. (For cleaning details refer to Chapter 5)
The base is designed with drain holes, it can drain water to the table.

WARNING

Use the main product only with the jug provided.
Do not turn on the appliance if the jug is empty, the overheat control will engage.
To prevent spillage, do not fill liquid more than the maximum capacity of the jug level indicator.
When you process milk or ingredients that tend to foam, do not put more than MAX MILK 210 ml in the jug.
Do not fill the jug with hot milk, this will increase the risk to overflow.
The brush and spoon incorporate a magnet. Keep the magnet away from the heat source.

Using your Multi Beverage

Make your drink

Remove the jug from the base.
Fill the jug with the desired amount of milk or water, [2] reading the level indicator inside of jug. [3]
Place the jug onto the base. [4] [5]
Press the ON/OFF button on the control panel. [6]
Select the desired drink button on the control panel. The selected drink setting will illuminate, and you will hear 2 audible beeps, [7] the heating process will automatically start. [8]
- Note: Do not select any drink button when the jug is not in place, it will enter Error Mode and turn off automatically. (Refer to Error Mode)
- Note: During the preparation process, when the jug is extracted from the base the function is paused. When the jug is put back in place the process resumes.
- Note: Pressing the drink button during preparation will stop the process.
When the preparation process is finished, you will hear 3 audible beeps. [9]
The product will automatically turn off after 10 min. [10]
Carefully remove the jug from the base and pour your drink. [11] [12]
Clean your jug after use and return the jug to the base. [15]

WARNING:
Make sure the underside of the device and the area underneath the base is dry. Do not operate with a damaged cable or plug. For making a delicious drink, make sure that the jug is clean and dry before use.

Milk preparation (Milk, Cold foam, Hot foam)

To prevent spillage, do not fill milk above the MAX MILK level indicator.
For optimal milk froth use semi-skimmed, refrigerated(4-6oC) milk, Milk that has been frozen will not froth.
See the recipe table for ingredients.

Chocolate preparation

To prevent spillage, do not fill milk above the MAX MILK level indicator.
To ensure the chocolate dissolves, it is recommended to cut the chocolate bar into small pieces (max 5*5mm).
See the recipe table for ingredients.

Coffee preparation

To prevent spillage, do not fill water above the MAX WATER level indicator.
Only use coffee powder as an ingredient.
When coffee is prepared, pour it into your cup through the supplied metal filter.
See the recipe table for ingredients.

Tea & Infuse preparation

To prevent spillage, do not fill water above the MAX WATER level indicator.
For tea bags, add bag directly into jug. When prepared, pour water into your cup and dispose of the teabag.
For Tea leaves & herbs, add the ingredients and water. When prepared, pour into your cup through the supplied metal filter.
See recipe table for ingredients.

MUTE FUNCTION
Your product is fitted with a mute function, this will turn off all button sounds from the appliance.

The mute function can be turned on by pressing and holding the chocolate button for 3 seconds.
To turn off this function, press and hold the chocolate button again for 3 seconds and the function is deactivated.

Note: The mute function will only turn on/off the button sound. The audible beeps indicating start or finish of the preparation will not be muted.

STANDBY MODE
After the heating cycle, the product will turn to standby mode automatically, only the ON/OFF indicator will be illuminated. The product will automatically power off after 10 minutes of further inactivity.

ERROR MODE
When an error is detected, the product will enter into error mode with blinking lights, audible beeping sounds, and will turn off automatically. There are 3 conditions in ERROR MODE: Temperature Sensor Error, Frother Error and Heating Element Error. (For solutions refer to Chapter 6)

Cleaning & Maintenance

Refer to image 15 to clean your product. [15]

Before cleaning the main product, please unplug it.
Do not use abrasive chemicals, metal objects or hard brushes to clean the appliance.
Remove the frother from the jug.
The cleaning brush delivered with the appliance is recommended to be used.
Never wash the jug in the dishwasher.
Make sure the connector and the recessed areas are clean and dry before next use.

Troubleshooting

Drink overflow

Cause 1: Milk or water exceed the Max level.
Cause 2: The jug inner has scale or is not clean.
- Solution: Ensure the milk and water does not exceed the max level (Max water 350ml, Max milk 210ml). Clean jug inner, ensure it is clean. [3]

Temperature sensor Error (All lights blinking for 5 seconds, and an audible beep sounds 3 times)

Cause 1: The jug not in the base but the drink function is selected.
Cause 2: The temperature sensor has short-circuited.

Solution: Ensure the jug is placed in the main product. If the problem persists contact Customer Service. Frother error (Left 3 lights blinking for 5 seconds, and an audible beep sounds 3 times.)

Cause 2: Agitator motor broke. Solution: Remove all ingredients in the frother and clean thoroughly, ensure the ingredient is cut into pieces less than 5*5mm. If the problem persists contact Customer Service.

Heating element error (Right 4 lights blinking for 5 seconds, and an audible beep sounds 3 times.)

Cause: Heating element broken.
Solution: Contact Customer Service.

Technical data

Electrical connection 220-240V~50/60Hz
Power 700W

Important information

Haier Spares and Consumables
Always replace parts with genuine Haier spares. These are available from your local Haier dealer or direct from Haier. When ordering parts always quote your model number.

Quality
Haier’s factories have been independently assessed for quality. Our products are made using a quality system that meets the requirements of ISO 9001.

Your Guarantee
The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.