Mohard T65 Trasmettitore FM Bluetooth Auto User Manual

Mohard T65 Trasmettitore FM Bluetooth Auto

Thank you!

Thank you for choosing our product! We invite you to spend a few minutes reading the user instruction before first use.

Note: For safety, please remove the product from your car cigarette socket when not used.

Specification

Bluetooth Version: V5.3
Rated Working Voltage: 12V-24V
USB Port: 5V/1A
QC3.0 Output: 5V/3A9V/2A 12V/1.5A
PD Output: 5V/3A 9V/2A 12V/1.5A
Music Support: MP3/WMNFLAC
U-Disk Capacity: Up to 32G
FM Freq: 87.5MHz-108. 0MHz
Bluetooth Range: 1 OM

Diagram

Operations

display will show the car battery voltage for 1 sec
Frequency Up/Down| Long press the “MFB” button, then press the “NexVPrevious” button or rotate the “MFB” to add/reduce the frequency
Play/Pause/Answer/ Hang up| Press the “MFB” once
Reject a call| Long press the “MFB” for about 2 seconds
Reject the last number| Press the “MFB” twice
Volume Up/Down| Rotate the “MFB”
NexVPrevious song| Press the “Nex’Previous” button once
Switch light mode| Press the “Light switch” button
Switch music source| Long press the “Next” button to switch from Bluetooth mode or U disk mode music, when switching to Bluetooth mode, you have to press “MFB” once to start the music
Activate phone voice control| In Bluetooth mode, long press the “Light switch” button

Instruction

Bluetooth mode: Step 1 -5
U disk mode: Steps 1, 3, 4, 6

1. Plug the transmitter into your car charger port, the display flashes means it is in pairing mode.
   

2. Turn on the Bluetooth function of your phone, search for Bluetooth devices and connect “T65”.
   
   If pairing is successful, the display will stop flashing and show FM frequency.
   Auto-connect: The product will auto-connect the last connected phone when turned on next time. (Please turn on the Bluetooth function of your phone before turning on the product.)

3. Adjust the car FM radio lo a blank frequency from 87.5MHz to 108.0MHz, for example, 88.1.
   

4. Long press the MFB button, when the LED flashes, rotate it to the same frequency as the car FM radio.
   

5. Open the music player/navigation of your phone, now it can transmit phone calls, music, or navigation to the car stereo system.
   Tip: Turn the phone volume and transmitter volume to the max level first, then tune your car volume to an appropriate level, to get the best sound quality.
   

6. You can also insert the U disk into the product, it will automatically detect and play the MP3/WMA/FLAC format music.
   

Troubleshootings

What are unused stations/blank frequencies?| Unused stations/ blank frequencies are stations that have no music or human voice, only a slight steady rustle.
---|---
Power is not responding or not displayed|

1. Make sure the FM Bluetooth transmitter is properly connected to a power source.
2. Try resetting the transmitter by unplugging it from the power source and plugging it back in.
3. Check if the fuse in the transmitter is damaged and needs to be replaced. (Do not operate by non-professionals.)

Noise and static|

1. Find a clean and  empty  channel in the current area (only rustle, no human voice or signal interference).
2. Please ensure that  the transmitter and car radio are set to the same channel.
3. Turn down the volume of car speakers, and increase the phone volume to reduce the background noise.

Hear unclear or totally can’t hear the voice of the other end during the call
Thecar FM transmitter and phone Bluetooth cannot connect|

1. Please choose Bluetooth to answer the call.

2. Poor phone signal at the other end of the call, we suggest you dial later.

3. Poor signal or interference in your car, please try to dial a few more times.

4. The transmitter microphone is far away from you, try to be closer or speak louder while calling.

5. Turn up the volume of your car audio and cell phone.
   Clear the Bluetooth device pairing history on your phone and restart your phone.

6. Unplug the FM transmitter from the power source, then plug it back into the cigarette lighter.

Warm Tips

1. Do not tum the radio volume too high (usually 18 or below) to avoid the increase of the sound back noise.
2. Although the transmission of this product is relatively strong, you’d better skip the frequency with the strong local signals to get better sound quality.
3. Do not use this product in a dusty and humid environment with extremely high or low temperatures.
4. Do not drop the product to avoid surface damage or breakdown.
5. Do not disassemble the product, if you have any questions, please contact your dealer.
6. Due to continuous improvement and enhancement of technology, changes in product performance and functionality are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>