Mohard BC81 Bluetooth FM Transmitter for Car User Manual

Mohard BC81 Bluetooth FM Transmitter for Car

Features

1. Supports Bluetooth and FM audio transmission
2. Supports QC3.0, QC2.0, PD, Huawai FCP, Samsung AFC, BC1 .2, and Apple 2.4A charging protocols
3. Supports hands-free calling. music playback, and navigation
4. Supports output over-voltage protection, short-circuit protection, over-current protection, and over-temperature protection
5. Supports automatic reconnection
6. Ambient lighting

Specifications

1. Bluetoolh version : 5.3
2. FM frequency: 87.5 MHz-108.□ MHz
3. Bluetooth effective distance : 10 meters/33 feet
4. QC3.0 port output : 5V/3A, 9V/2A, 12V/1.5A
5. PD port output : 5V/3A, 9V/3A, 12V/2.5A PPS: 3.3V-11V/3A
6. Maximum output power : 48W
7. lnput vottaga : 12V-24V

Product Diagram

Operating Instructions

1. After the vehicle starts, insert the device into the vehicle’s cigarette lighter.
2. After inserted, the device automatically turns on and displays the current voltage, then “br and frequency flashes alternately.
3. Turn on the car radio and adjust it to a blank FM channel.
4. Tune the device to the same channel as the car radio.
5. Tum on the Bluetooth of your phone, search for “BC81”, and click to connect.
6. Once connected, you can play music, use navigation, or make/answer calls.

FM Frequency Regulation

1. Long press the “) ” button to enter the frequency adjustment mode, while the number is flashing.
2. CIick or long press the button to increase or decrease the frequency.
3. CIick the “ ” button to corm the frequency or wait for 3 seconds for automatic saving.

Volume Adjustment
Volume defaults to maximum and is not adjustable.

Music Control

1. Pause/Play : Click the• • button
2. Previous song: Click the “ ” Dutton
3. Next song : Click the • button

Dial/Answer Call

1. Answer a call : Glick the button
2. Hang up a call : Click the n button
3. Redial calls: Double-click the “ l” button
4. Reject a call : Long press the•  button

Ambient Light

1. Long press the ” Mol ” button to tum on the ambient light, continue to long press to switch the light color in sequence, and finally b.Jm off the llghl.
2. Playback status: Monochromatic breathing
3. Incoming call status : Alternately flashing blue and green (no light prompt when off)
4. Default slate : Monochrome always on

Low Voltage Warning Function
When the battery voltage is lower than 11V, the voltage flashes to alarm the low voltage; when the voltage returns to 11V and above, it reb.Jms to normal.

Warm Tips

1. Do not tum the radio volume too high (usually 18 or below} to avoid the Increase of the sound back noise
2. Although the transmission of this product is relatively strong, you’d better skip the frequency with the strong local signals to get better sound quality.
3. Do not use this product In a dusty and humid environment with extremely high or low temperatures.
4. Do not drop the product to avoid surface damage or breakdown.
5. Do not disassemble the product, if you have any questions, please contact your dealer.
6. Due to continuous improvement and enhancement of technology, changes in product performance and functionality are subject to change without notice.

Troubleshooting’s

1. Make sure the FM Bluetooth transmitter is properly connected to a power source.
2. Try resetting the transmitter by unplugging it from the power source and plugging it back in.
3. Check if the fuse in the transmitter is damaged and needs to be replaced.

(Do not operate by non-professionals.}

---|---
Noise and static|

1. Find a clean and empty channel in the current area (only rustle, no human voice or signal interference).
2. Please ensure that the transmitter and car radio are set to the same channel.
3. Tum down the volume of car speakers, and increase the phone volume to reduce the background noise.

Hear unclear or totally can’t hear the voice of the other end during the call|

1. Please choose Bluetooth to answer the call.
2. Poor phone signal al the other end of the call, we suggest you dial later.
3. Poor signal or interference in your car, please try to dial a few more times.
4. The transmitter microphone is far away from you, try to be closer or speak louder while calling.
5. Tum up the volume of your car audio and cell phone.

---|---
The car FM transmitter and phone Bluetooth cannot connect|

1. Clear the Bluelooth device pairing history on your phone and restart your phone.
2. Unplug the FM transmitter from the power source, then plug it back into the cigarette lighter.
3. Activate Bluetooth on the phone and reconnect.

Package Includes

1. Bluetooth FM Transmitter for Car
2. User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>