SANGAN PT303 Univeral Pressure Transmitter User Guide

SANGAN PT303 Univeral Pressure Transmitter

FEATURES

• SS 316L diaphragm structure
• High accuracy, all stainless steel structure
• Small size and light weight
• Storage anti-interference, good long-term stability
• Diversified formal structures, easy installation and use
• Wide pressure range, can measure the absolute pressure, gauge pressure and sealed gauge pressure
• Anti-vibration, shock resistance
• Zero, full span adjustable

APPLICATIONS

• Process control
• Aerospace
• Automobile and medical Equipment
• Pipeline system

PRODUCT OVERVIEW

PT303 economic pressure transmitter adopts diffused silicon pressure sensor as pressure sensing element. Through internal ASIC, the millivolt signal of sensor is transmitted into standard current signal. PT303 can be directly connected with computer interface card, control instruments, intelligent meters or PLC etc. conveniently. Long-distance transmission can use current output. PT303 features with small size, light weight. all stainless steel sealing structure and ability to work in corrosive environments. The product is easy to install and has extremely high vibration and shock resistance. PT303 is widely used in process control, aviation, aerospace, automobile, medical equipment, HVAC and other fields.

PERFORMANCE PARAMETERS

OUTPUT AND POWER SUPPLY

• Output: 4~20mA
• Power supply: 12~30V DC

ELECTRICAL CONNECTION & WIRING MODE

*All dimensions are in mm.

APPLICATION OF DAMPER

Applications
Cavitation, liquid hammer and pressure peak may occur in air or fluid systems with varying flow rates, such as the rapid closing of the valve or the start and stop of the pump.
Even at relatively low operating pressures, these problems may occur at the entrance and exit.

Media condition
In the liquid containing particles, nozzle clogging may occur. The vertical mounting of pressure transmitter minimizes the risk of clogging because the flow of fluid happens in initial start only, the volume of the rear of the nozzle is fixed and the nozzle has a relatively large aperture (1.2mm). The effect of medium viscosity on response time is small. Even if the viscosity reaches 100 CST, the response time will not exceed 4ms.

PRESSURE CONNECTION

*All dimensions are in mm.
NOTE: The torque depends on all kinds of factors, such as gasket material, kitting material, thread lubrication and pressure.

ORDERING CODES

Ordering Example : PT303-NA-CL3-XXX-HC-GA-ND2-14M

NOTES

1. Do not touch the diaphragm with hard objects, which may cause damage to the diaphragm.
2. Please read the Instruction Manual of the product carefully before installation and check the relevent information of the product.
3. Strictly follow the wiring method for wiring, otherwise it may cause product damage or other potential faults.
4. Misuse of the product may cause danger or personal injury.
5. Do not misuse documentation.
6. The information presented in this product sheet is for reference only. Do not use this document as a product installation guide.
7. Complete installation, operation, and maintenance information is provided in the instructions of the product.

STANDARD RANGES

Pressure Range Code| Pressure Reference| Pressure Range| Overpressure| Burst Pressure
---|---|---|---|---
F11| G| 0…100mbar| 300%FS| 600%FS
F14| G| 0…200mbar| 300%FS| 600%FS
F16| G,A| 0…350mbar| 300%FS| 600%FS
F20| G| 0…700mbar| 300%FS| 600%FS
B02| G,A| 0…1bar| 200%FS| 500%FS
B03| G,A| 0. 1.6bar| 200%FS| 500%FS
B05| G,A| 0. 2.5bar| 200%FS| 500%FS
B06| G,A| 0…4bar| 200%FS| 500%FS
B07| G,A| 0…6bar| 200%FS| 500%FS
B09| G,A| 0…10bar| 200%FS| 500%FS
B11| G,A,S| 0…16bar| 200%FS| 500%FS
B13| G,A,S| 0…25bar| 200%FS| 500%FS
B16| S| 0…40bar| 200%FS| 400%FS
B17| S| 0…60bar| 200%FS| 400%FS
B19| S| 0…100bar| 200%FS| 400%FS
B21| S| 0…160bar| 200%FS| 400%FS
B24| S| 0…250bar| 150%FS| 400%FS
B27| S| 0…400bar| 150%FS| 300%FS
B29| S| 0…600bar| 150%FS| 300%FS

NOTES

1. G stands for gauge pressure, A, absolute pressure, S, sealed gauge pressure.
2. select the non-oil filling pressure sensor, and the measurement medium must be clean gas.

www.sangansanat.com
info@sangansanat.com

Tel: +98 21 56230420 Fax: +98 21 56230440

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>