OLIGHT RN120C Rechargeable Smart Bicycle Tail Light User Manual
- June 17, 2024
- OLIGHT
Table of Contents
OLIGHT RN120C Rechargeable Smart Bicycle Tail Light
IN THE BOX
SPECIFICATIONS
The tests are performed indoors at a room temperature of 25 degrees Celsius with 25KM/H wind conditions.
HOW TO INSTALL
SCHEME 1
SCHEME 2
HOW TO RECHARGE
DANGER
- DO NOT expose the device or batteries to fire, explosion, or other hazards.
- DO NOT disassemble or modify the light or any of the included items.
WARNING
- Keep out of reach of children.
- The light contains a polymer battery. Certain restrictions may apply to this product when travelling, especially when travelling by air.
- Always check with your carrier for specific restrictions before travelling with this product.
NOTICE
- Store the light at room temperature in a dry place. Avoid moisture, or extreme heat or cold.
- Store the light in the charged condition. Avoid “deep discharge”. Battery life will decrease if the light is stored in a fully discharged condition.
- Over time, the run time of the battery will diminish. Expect about 500 full charges, depending on care. After a full life, the battery will continue to charge but with a lower run time.
OPERATION INSTRUCTIONS
ON/OFF
Press and hold the switch to turn the light on/off. The default output is
the last mode when turned off.
TURN THE BRAKE FUNCTION ON
When the light is off, press and hold the switch for 3 until the light
lights up constantly at the highest output.
TURN THE BRAKE FUNCTION OFF
When the light is off, press and hold the switch for 3s until the light
keeps flashing quickly at the highest output.
ADJUST BRIGHTNESS
When the light is on, single click the switch to cycle through Low-High-
Flash-ECO-Smart-Low…
MEMORY FUNCTION
When the light is turned on again, it will turn to the last selected
lighting mode automatically.
LOW POWER MODE
When the remaining battery power is low, the switch starts flashing and the
lighting mode changes to ECO mode. The brake function is disabled during this
period. When the brake sensor is on, the taillight will enter sleep mode after
5 minutes of inaction and automatically activate any vibrations. When the
brake sensor detects braking, the taillight will light up with maximum output.
WARRANTY
Within 30 days of purchase: Return to the original seller for repair or replacement. Within 2 years of purchase: Return to Olight for repair or replacement. This warranty does not cover normal wear and tear, modifications, misuse, disintegration, negligence, accidents, improper maintenance, or repair by anyone other than an Authorized retailer or Olight itself.
USA Customer Support
cs@olightstore.com
Global Customer Support
contact@olightworld.com
Visit www.olightworld.com to see our complete
product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6
Zhongnan Road, Changan Town, Dongguan City,
Guangdong, China.
Made in China