Bolens R251 Disc Harrow Attachment Owner’s Manual
- June 17, 2024
- BOLENS
Table of Contents
Bolens R251 Disc Harrow Attachment
INSTALLATION AND OPERATING INSTRUCTIONS
- The type R251 Disc Harrow Attachment for Bolens
- Ridemaster is shipped as two bundles consisting of right-hand and left-hand disc gangs with standards and clamps.
- Disc gangs, standards, and clamps are completely assembled.
- The two-gang disc harrow is a versatile tool for mulching, cultivating, hilling, breaking plowed ground, etc. The disc gangs can be placed at any desired angle by loosening the adjusting bolts and retightening when the discs are at the desired angle.
- Extend rear tractor wheel standards so wheels are at the outer edge of the outside discs as shown. To pulverize the soil adjust the gangs so the disc blades are running directly forward. The gangs can be moved to the right or left on the toolbar for various widths: of discing.
- TO THROW “OUT”. Attach the side gangs to the tractor toolbar with the concave, or hollow, side of the discs towards the outside and angle the disc gangs as shown.
- TO THROW “IN”. Attach the disc gangs to the tractor tool bar with the concave, or hollow, sides in, and the gangs opposite to that shown. The center disc will lead the outer discs.
MAINTENANCE
Lubricate the grease fittings on each standard ever: few hours of operation. Force grease in the fitting until it is forced out at the edges of the bearing. Coa disc blades with rust preventative before storing
IMPORTANT ORDERING INSTRUCTIONS
Appointing Bolen’s agencies, consideration has en given to their ability to provide prompt and ficient service. We recommend that your local aler be contacted for your service requirements. will furnish the correct parts from his stock and order them for you if necessary. ) ensure getting correct materials without delay ease supply the following information. Please print to avoid errors.
- The TYPE NUMBER is shown on the name plate attached to the implement and illustrated below.
- Quantity, part number, and description of each part wanted.
- Advise as to whether parts should be shipped by mail, express, or freight. (All repair orders are shipped F.O.B. factory.)
- Name, shipping address, and mail address.
TYPE R251 DISC HARROW
NOTE: Nuts and bolts are standard sizes and can be obtained from your
Hardware or Implement dealer.
KENCO LITHO IN U.S.A.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>