niko 551-18001 Digital Black Connected Customisable Control Screen Owner’s Manual
- June 4, 2024
- niko
Table of Contents
Digital black, connected customizable control screen, 230 V, screw
fixing
niko 551-18001 Digital Black Connected Customisable Control Screen
551-18001
4-year warranty
The Digital black is a completely customizable touchscreen that has an
extremely user-friendly interface with clear symbols. The screen is
automatically activated when your hand comes near. When there is no Niko Home
Control installation available, the built-in switching contact can be
controlled via the touchscreen or an N.O. push-button extension (170-00005).
When the connection to a Niko Home Control installation has been made, it
becomes possible to switch or dim your lights, set scenes, set ventilation
modes, and adjust blinds and sunblinds to the desired position, in one
operation. In short, all possible types of controls are available in your Niko
Home Control installation. Do you have a Niko Home Control thermostat
(5501305x) or an active connection with one of our heating partners? Then you
can easily set the temperature with the Digital black. With the corresponding
Niko Home app not only can you choose which controls are displayed or where
they are displayed on the screen, but also the way you navigate through your
control screens. You can download this app for free in the respective app
store for your mobile device.
The Digital black can be easily mounted in any standard flush-mounting box
using the familiar claw or screw fixing and is powered on 230V AC (L- + N-wire
required). This 230V AC variant is equipped with a switching contact 10 A
(resistive), meaning that it can easily be replaced with a conventional
single-pole switch. In combination with the wireless smart hub for Niko Home
Control (552-00001) and additional controls from the Niko Home Control range
for traditional wiring, you can easily add automation to your conventional
installation.
The screen communicates via your wireless home network with the rest of your
Niko Home Control system. You need an active internet connection to activate
the Digital black. This internet connection ensures that your Digital black
and Niko Home Control installation are always up-to-date and have the most
recent functionalities.
Technical data
Digital black, connected customizable control screen, 230 V, screw fixing.
- Power supply: 230 Vac, ± 10%, 50 Hz (L- + N-wire required)
- Mounting method: flush-mounting in a standard flush-mounting box
- Mounting height: 110 – 160 cm
- Dimensions (HxWxD) (base): 75 x 70 x 31.5 mm
- Dimensions (HxWxD) (display): 83 x 83 x 11.3 mm
- Screen size: 3.6”
- Screen resolution: 1024 x 768 pixels
- Screen brightness: Automatic
- Proximity sensor: 0 – 30 cm
- System programming: Niko Home app or Niko Home Control programming software
- Configuration: Niko Home app
- Communication: Wi-Fi 2.4 GHz bgn (HT20), WPA2-PSK (personal)
- System compatibility: Niko Home Control II
- Maximum number of Digital blacks per installation: 20
- Fixing method with screws for simple fixing in a flush-mounting box with grip surfaces
- Maximum radio frequency power: 15.19 dBm
- Operating frequency: 2.4 GHz
- Protection degree: IP40
- Impact resistance: IK02
- Dimensions (HxWxD): 83 x 83 x 11.3 mm
- Marking: CE
www.niko.eu
551-18001 – 07-09-2022